16R1103_Responses_to_Industry_Questions.pdf

84 KB Posted

Attached to
Inclement Weather Combat Shirt
Solicitation number
M67854-16-R-1103
Issued by

About this file

From the source

Responses to Industry Questions

View the file

Other files

File Type Posted
16R1103-0004.docx DOCX document
16R1103_RFP_Amendment_0003_Attachment_01_(April_2016)_IWCS_PD.pdf PDF
Responses_to_Industry_Questions.pdf PDF
16R1103-0003.pdf PDF
16R1103_RFP_Attachment_01_(Apr_2016)_IWCS_PD.pdf PDF
16R1103_RFP_Attachment_02_(8_Apr).pdf PDF
16R1103_Amendment_0002.pdf PDF
16R1103_Amendment_0001.docx DOCX document
16R1103_RFP.pdf PDF
16R1103_RFP_Attachment_02.pdf PDF
16R1103_RFP_Attachment_03.pdf PDF
16R1103_RFP_Attachment_05.pdf PDF
16R1103_RFP_Attachment_04.pdf PDF
16R1103_RFP_Attachment_01_(Mar_2016).pdf PDF
IWCS_PD_Nov_2015_FBO_Draft.pdf PDF
Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

M67854-16-R-1103

Amendment 0002

Responses to Industry Questions

Q1. Pattern Discrepancy: More specifically, Table VI of the PD shows the number of cut pieces and types of fabric for each piece. Please note that this table shows the collar as part of the non stretch woven material. However, the patterns clearly show that the collar is part of the cut pieces for the stretch woven material. Please clarify what source is correct: pattern or PD cut list?

A1. The pattern is correct. The Government updated the PD to reflect that the collar is to be cut out of the stretch woven material.

Q2. When we open the patterns, the Yoke pieces appear to be located in a manner that is NOT consistent with the warp direction. Is it the Government's intent to have contractors cut the patterns exactly as shown in the patterns, or is the Contractor responsible for determining the correct warp direction in relation to the other pattern pieces? Please note that the aforementioned question is ONLY for the Yoke. All other pattern pieces appear to be properly oriented.

A1. The yoke is positioned for the center front zipper to be on the warp. Please follow the pattern and cut as is.

Q3. There have been delays receiving the correct color on two of the components, Gimp Thread and Slide Fasteners, we have alternates which are the correct specification just not the correct color. Would it be acceptable to use these components if the correct colors are not received in time? It would be noted in our proposal. Please advise.

A3. It will be acceptable, butthe Government will accept a color change in the Product Demonstration Models only.

File details come from the government source that posted it. Updated .