SPI_Attachment_1_-_Antenna_750R00G001_SPI.PDF

NOTES

1. LIFT ANTENNA BY THE USE OF WEB STRAPS, REF.-10, ONLY.

2. REF.-16 IS INCLUDED UNDER 5306-01-090-4853 WF WHEN ORDERING SPECIFY 4 EACH INTERNAL THREADS.

3. POSITION ANTENNA AND SECURE TO FALSE BASE, REF.-11, USING REF.-16 THRU -19 AS SHOWN. ENSURE ANTENNA

ARRAY IS SECURED HORIZONTALLY WITH TWO (2) TRANSPORT LOCKING PINS (5315-01-122-2570 WF). ALSO ENSURE

THAT THE PLASTIC ARRAY COVER (1730-01-123-0095 WF) IS SECURED IN PLACE.

4. FOR PLACEMENT OF PADS, REF.-23, CENTER PAD ON ENDS 3 1/4 INCHES FROM BOTTOM EDGE. CENTER PAD ON SIDES 2

INCHES FROM BOTTOM EDGE.

5. USE ADDITIONAL MIL-PRF-121, REF.-15, OR PPP-C-1797, REF.-20, ON SHARP CORNERS AND PROTRUSIONS TO KEEP

FROM PUNCTURING BARRIER BAG.

6. PRIOR TO SEALING, CAREFULLY EVACUATE EXCESS AIR ENSURING THE ANTENNA IS NOT DAMAGED. INSTALL

DESICCANT, REF.-22, AT BOTTOM OF ANTENNA IN AN OPEN POLY BAG.

7. USE ADHESIVE A-A-1936 TYPE II OR EQUAL TO LAMINATE REF.-23, -25, -27 TO CONTAINER LID, SIDES AND POSTS AS

ILLUSTRATED.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS

LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING

MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT)

MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS

REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR

REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

CAUTION NOTICES

NOTES

1. USE OF ALTERNATE PACK MUST BE APPROVED BY PACKAGING MANAGEMENT OFFICE VIA PACKAGING WAIVER. USE OF

ALTERNATE PACK IS NOT AUTHORIZED WITHOUT PACKAGING WAIVER.

2. LIFT ANTENNA BY THE USE OF WEB STRAPS, REF.-10, ONLY.

3. USE ADHESIVE A-A-59692, TYPE II, TO LAMINATE ONE REF.-15 TO REF.-14, AND THE OTHER REF.-15 TO THE BOTTOM OF

REF.-19.

4. USE NAILS ASTM F1667 TO ASSEMBLE REF.-20 & -21 TO REF.-19; USE NAILS ASTM F1667 TO ASSEMBLE REF.-25 TO

REF.-24.

5. FOR PLACEMENT OF PADS, REF.-30, CENTER PAD ON ENDS 3 1/4 INCHES FROM BOTTOM EDGE. CENTER PAD ON SIDES 2

INCHES FROM BOTTOM EDGE.

6. USE ADDITIONAL REF.-18 ON SHARP CORNERS AND PROTRUSIONS TO KEEP FROM PUNCTURING BARRIER BAG, REF.-17.

7. PRIOR TO SEALING, CAREFULLY EVACUATE EXCESS AIR ENSURING THE ANTENNA IS NOT DAMAGED. INSTALL

DESICCANT, REF.-29, AT BOTTOM OF ANTENNA IN AN OPEN POLY BAG.

8. USE ADHESIVE A-A-1936, TYPE II OR EQUAL, TO LAMINATE REF.-30, -32, -34 TO CONTAINER LID, SIDES AND POSTS AS

ILLUSTRATED.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS

LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING

MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT)

MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS

REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR

REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

CAUTION NOTICES