CB-M_L10004.0.pdf

U.S. COAST GUARD

ASSET COMPUTERIZED MAINTENANCE SYSTEM

CB-M-17

L10004.0

REV'D 05/31/16

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

ITEM 1

DUE

CMS CODE ACTION DESCRIPTION CEINUM

L10004 REPLACE JET DRIVE EXTERNAL ANODES CB-A450-010

SCHEDULED UNSCHEDULED

JET DRIVE SERIAL NUMBER ELASP/TIME CLOCK/TACH/HOUR METER READING

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

REMARKS:

TECHNICIAN'S

SIGNATURE

TECHNICIAN'S

ID

* ASTERISK INDICATES QA REQUIRED QA

REFERENCES:

TP 4584B-583-A, RHIB Jet Drive-Model HJ-213

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

Distribution Statement D: Distribution authorized to the DHS/CG/DoD and their contractors Administrative/Operational use, 04/13/16. Other requests shall be referred to the appropriate asset product line.

WARNING: This document contains technical data whose export is restricted by the Arms Export-Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C. App 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE: For classified documents, follow the procedures in DoD 5200.22-M, National Industrial Security Program Operating Manual, Section 5-705 or DoD 5200.1-R, Information Security Program Regulation, Chapter VI, Section 7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

http://cgweb.netims.uscg.mil:7002/NETIMS/content/conn/SURFACE_WCC/path/Surface/TECH_PUB/4584B/4584B_583_A.pdf

CB-M-17

L10004.0

REV'D 05/31/16

MK BM

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DC IT

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

EM FN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

ET SN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

GM OTHER

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 2 of 5

CB-M-17

L10004.0

REV'D 05/31/16

1 JET DRIVE ANODES REPLACE

REFERENCES:

COMDTINST 9077.1 (series) Equipment Tag-Out Procedure

TOOLS/TESTEQUIPMENT:

Torque, Wrench (0-50 ft-lb)

EXPENDABLES:

Anode, Corrosion Preventive, P/N: 103359, CAGE: 1PWP4, NIIN: 982040988 (5) (If required)

CONSUMABLES:

Brush, Nylon, P/N: A408848-2, CAGE: 80020, NIIN: 000565525 Nut, Plain, Hexagon, P/N: 201309, CAGE: 1PWP4, NIIN: 015468465 (8) (If required) Screw, Cap, Hexagon Head, P/N: 201225, CAGE: 1PWP4, NIIN: 015620742 (2) (If required) Washer, Spring Tension, P/N: 201394, CAGE: 1PWP4, NIIN: 015468461 (8) (If required)

A PRELIMINARY STEPS

WARNING

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE

TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY

OR DEATH.

1. Complete Red Danger Tags IAW COMDTINST 9077.1 (series).

B REPLACE

1. Remove jet nozzle anode.

a. Remove the two, M8 nuts from the jet nozzle anode studs, (Refer to Figure 1).

b. Remove the two, M8 spring washers from the studs.

c. Remove anode.

2. Remove two reverse duct anodes.

a. Remove one port reverse duct anode.

(1) Remove the two, M8 nuts from the reverse duct anode studs.

(2) Remove the two, M8 spring washers from the studs.

(3) Remove anode.

b. Remove one starboard reverse duct anode.

(1) Remove the two, M8 nuts from the reverse duct anode studs.

(2) Remove the two, M8 spring washers from the studs.

(3) Remove anode.

3. Remove two tail pipe anodes.

a. Remove the two, M8 nuts from the two, M8 hex head screws mounted on the bottom of the tail pipe.

b. Remove the two, M8 spring washers from the M8 hex head screws.

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 3 of 5 http://www.uscg.mil/directives/ci/9000-9999/CI_9077_1C.pdf

CB-M-17

L10004.0

REV'D 05/31/16

c. Remove the two, M8 hex head screws and the two anodes from the anode mount.

4. Clean anode contact areas using nylon brush, P/N: A408848-2.

5. Discard fasteners, if damaged, and replace with new.

C INSTALL

1. Install the new jet nozzle anode, P/N: 103359.

a. Install two, M8 spring washers on the mounting studs.

b. Thread two, M8 nuts onto the mounting studs.

c. Torque the M8 nuts to 9 ft-lb using a torque wrench.

2. Install the two new reverse duct anodes, P/N: 103359.

a. Install one port reverse duct anode.

(1) Install two, M8 spring washers on the mounting studs.

(2) Thread two, M8 nuts onto the mounting studs.

(3) Torque the M8 nuts to 9 ft-lb using a torque wrench.

b. Install one starboard reverse duct anode.

(1) Install two, M8 spring washers on the mounting studs.

(2) Thread two, M8 nuts onto the mounting studs.

(3) Torque the M8 nuts to 9 ft-lb using a torque wrench.

3. Install the two new tail pipe anodes, P/N: 103359.

a. Install two, M8 hex head screws and two anodes to the anode mount.

b. Install two, M8 spring washers on the M8 hex head screws.

c. Thread two, M8 nuts onto the M8 hex head screws.

d. Torque the M8 nuts to 12 ft-lb using a torque wrench.

D FINAL STEPS

1. Remove Red Danger Tags IAW COMDTINST 9077.1 (series).

2. Record maintenance action by completing the appropriate sign-off, and adding pertinent remarks.

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 4 of 5

CB-M-17

L10004.0

REV'D 05/31/16

JET DRIVE ANODES

Figure 1

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 5 of 5

JET DRIVE ANODES