HSCG40-10-R-30088 Section B.xlsx

XLSX spreadsheet 104 KB Posted Jun 24, 2011

Attached to: Escher Wyss Hub Repair
Solicitation number: HSCG40-10-Q-30088
Issued by: Department of Homeland Security US Coast Guard

About this file

From the source

New Section B

View the file

Other files

File	Type	Posted
AMEND 0002.docx	DOCX document	Jun 24, 2011
AMEND 0001.pdf	PDF	Apr 12, 2011
R-245-0419_A.doc	DOC document	Mar 17, 2011
HSCG40-10-R-30088.pdf	PDF	Mar 17, 2011
R-245-0155-Hub Spec.pdf	PDF	May 7, 2010

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

378 Base

CLIN	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
0001	For Approval, Arrival and Final Inspection/Test Plan Reporting Formats in accordance with specification R-245-0155, Sections 3.3.1 and 3.3.2.	1	EA	NSP	NSP
0002	For Approval, Qualification and Certification of Thermal Spray Procedures and Personnel for Type 6 Hubs in accordance with specification R-240-0419, section 3.4 as referenced in section 2.3.1.a of specification R-245-0155.	1	EA	NSP	NSP
	HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892
0003	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0004	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
005	Hub Assembly, NSN 2010-12-307-6892, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0006	Non-Repairable Hub Assembly, NSN 2010-12-307-6892, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0007	5330-01-377-2097, Seal, Nonmetallic, P/N R505-25	4	EA	$ - 0	$ - 0	$ - 0	100%
0008	Sealing Ring, P/N R100-10	4	EA	$ - 0	$ - 0	$ - 0	100%
0009	Sealing Ring, P/N 8 x 3230	1	EA	$ - 0	$ - 0	$ - 0	100%
0010	Gasket, P/N 31/26 x 2	6	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892
0011	2010-01-006-4716, Crank Ring, L.H., P/N 8344707-02-CCW	4	EA	$ - 0	$ - 0	$ - 0	50%
0012	2010-01-024-2871, Blade Trunion, L.H, P/N 8344701-00-PIECE-76	4	EA	$ - 0	$ - 0	$ - 0	70%
0013	5340-12-328-0234, Sliding Block, P/N 8344717-09	4	EA	$ - 0	$ - 0	$ - 0	50%
0014	5330-12-328-0235, Ring, Piston, P/N SU 800	4	EA	$ - 0	$ - 0	$ - 0	25%
0015	2010-12-184-1507, Bushing Sleeve, P/N 8344716-02	4	EA	$ - 0	$ - 0	$ - 0	50%
0016	Fitting Key, P/N 10X8X30 DIN 3105	8	EA	$ - 0	$ - 0	$ - 0	25%
0017	Strap, 705X30X120 P/N 8344718-04	4	EA	$ - 0	$ - 0	$ - 0	5%
0018	Strap, 705X30X120 P/N 8344718-03	4	EA	$ - 0	$ - 0	$ - 0	5%
0019	Securing Ring, P/N A70X2.5 DIN 471	16	EA	$ - 0	$ - 0	$ - 0	50%
0020	3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03	4	EA	$ - 0	$ - 0	$ - 0	50%
0021	3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03	1	EA	$ - 0	$ - 0	$ - 0	50%
0022	3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05	8	EA	$ - 0	$ - 0	$ - 0	50%
0023	Ball 400 P/N 40D1N5401	1	EA	$ - 0	$ - 0	$ - 0	50%
0024	Spring Plate P/N 8344717-08	1	EA	$ - 0	$ - 0	$ - 0	50%
0025	3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06	1	EA	$ - 0	$ - 0	$ - 0	25%
0026	2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5	1	EA	$ - 0	$ - 0	$ - 0	1%
0027	4820-12-313-6128, Valve, Check, P/N 8344717-07	1	EA	$ - 0	$ - 0	$ - 0	50%
0028	5310-12-326-4442, Nut, Plain Round, P/N 8344719-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0029	5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04	8	EA	$ - 0	$ - 0	$ - 0	25%
0030	5330-01-228-0929, Ring, P/N 8344717-02	4	EA	$ - 0	$ - 0	$ - 0	25%
					$ - 0	$ - 0	25%
0031	Pressure Spring, P/N 8 345 048-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0032	Securing Ring, P/N J4O X 1.75DIN472	1	EA	$ - 0	$ - 0	$ - 0	25%
0033	Actuating Rod, P/N 8 344 721-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0034	2010-01-008-5271, Sliding Guide, P/N 8 344 718-02	4	EA	$ - 0	$ - 0	$ - 0	10%
0035	Socket Head Cap Screw, P/N M24x6ODIN912	8	EA	$ - 0	$ - 0	$ - 0	75%
0036	2010-12-328-0434, Cap 1080, P/N 8 344 706-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0037	Socket Head Cap Screw, P/N M24x75DIN912	16	EA	$ - 0	$ - 0	$ - 0	75%
0038	Spring, Lock Washer, P/N 24D1N7980	24	EA	$ - 0	$ - 0	$ - 0	25%
0039	3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01	1	EA	$ - 0	$ - 0	$ - 0	1%
0040	5365-12-328-0039, Ring, P/N 8344 718-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0041	5310-12-313-1093, Nut, P/N 8 344 717-05	1	EA	$ - 0	$ - 0	$ - 0	25%
0042	Pin, P/N 20x45DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0043	Locking Screw, P/N 8 371 541-01	2	EA	$ - 0	$ - 0	$ - 0	75%
0044	2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01	1	EA	$ - 0	$ - 0	$ - 0	5%
0045	5310-01-004-2961, Special Nut, P/N 8 344 717-04	1	EA	$ - 0	$ - 0	$ - 0	25%
0046	Stay Bolt, P/N 8344716-04	4	EA	$ - 0	$ - 0	$ - 0	10%
0047	Pin, P/N 12x25DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0048	Cap Nut, P/N 8344717-01	4	EA	$ - 0	$ - 0	$ - 0	25%
0049	Threaded Pin, P/N D1N417	1	EA	$ - 0	$ - 0	$ - 0	25%
0050	Locking Device, P/N 8344700-00 Piece 20	1	EA	$ - 0	$ - 0	$ - 0	25%
0051	Special Screw, P/N 8344717-03	1	EA	$ - 0	$ - 0	$ - 0	75%
0052	Tip, P/N 8344707-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0053	Securing Washer, P/N 12.2N2660	1	EA	$ - 0	$ - 0	$ - 0	25%
0054	Locking Screw, P/N R5/8x2ON2233	2	EA	$ - 0	$ - 0	$ - 0	75%
0055	Threaded Pin, P/N DIN417	1	EA	$ - 0	$ - 0	$ - 0	25%
0056	Locking Plate, P/N 8 344 719-06	4	EA	$ - 0	$ - 0	$ - 0	50%
0057	Hex Screw, P/N DIN933	8	EA	$ - 0	$ - 0	$ - 0	75%
0058	Hex Screw, P/N 1/2-13UNC-3Ax20	1	EA	$ - 0	$ - 0	$ - 0	75%
0059	Locking Screw, P/N 3/4 NPTF	2	EA	$ - 0	$ - 0	$ - 0	75%
0060	Threaded Pin, P/N DIN 417	1	EA	$ - 0	$ - 0	$ - 0	25%
0061	5310-12-326-4441, Special Nut, P/N 8 344 720-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0062	Bush 23"DIA., P/N 8 344 714-01	1	EA	$ - 0	$ - 0	$ - 0	50%
0063	Wire 1/8” Monel, P/N 8344700-00 Piece 23	3	FT	$ - 0	$ - 0	$ - 0	50%
0064	Wire 1/16” Monel, P/N 8344700-00 Piece 59	2	FT	$ - 0	$ - 0	$ - 0	50%
0065	Locking Screw, 3/4”- NPTF P/N 8344700-00, Piece 81	1	EA	$ - 0	$ - 0	$ - 0	75%
0066	Locking Screw, 1/2” – 13 UNC – 2A, P/N 8344700-00 Piece 80	2	EA	$ - 0	$ - 0	$ - 0	75%
0067	New Shipping Container for Hub Type 1, Style A	1	EA	$ - 0	$ - 0	$ - 0	50%

	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891
0068	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0069	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0070	Hub Assembly, NSN 2010-12-307-6891, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0071	Non-Repairable Hub Assembly, NSN 2010-12-307-6891, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0072	5330-01-377-2097, Seal, Nonmetallic, P/N R505-25	4	EA	$ - 0	$ - 0	$ - 0	100%
0073	Sealing Ring, P/N R100-10	4	EA	$ - 0	$ - 0	$ - 0	100%
0074	Sealing Ring, P/N 8 x 3230	1	EA	$ - 0	$ - 0	$ - 0	100%
0075	Gasket, P/N 31/26 x 2	6	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891
0076	2010-01-503-1780, Crank Ring, R.H., P/N 8344707-02-CW	4	EA	$ - 0	$ - 0	$ - 0	50%
0077	2010-12-191-2667, Blade Trunion, R.H, P/N 8344719-07	4	EA	$ - 0	$ - 0	$ - 0	70%
0078	5340-12-328-0234, Sliding Block, P/N 8344717-09	4	EA	$ - 0	$ - 0	$ - 0	50%
0079	5330-12-328-0235, Ring, Piston, P/N SU 800	4	EA	$ - 0	$ - 0	$ - 0	25%
0080	2010-12-184-1507, Bushing Sleeve, P/N 8344716-02	4	EA	$ - 0	$ - 0	$ - 0	50%
0081	Fitting Key, P/N 10X8X30 DIN 3105	8	EA	$ - 0	$ - 0	$ - 0	25%
0082	Strap, 705X30X120 P/N 8344718-04	4	EA	$ - 0	$ - 0	$ - 0	5%
0083	Strap, 705X30X120 P/N 8344718-03	4	EA	$ - 0	$ - 0	$ - 0	5%
0084	Securing Ring, P/N A70X2.5 DIN 471	16	EA	$ - 0	$ - 0	$ - 0	50%
0085	3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03	4	EA	$ - 0	$ - 0	$ - 0	50%
0086	3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03	1	EA	$ - 0	$ - 0	$ - 0	50%
0087	3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05	8	EA	$ - 0	$ - 0	$ - 0	50%
0088	Ball 400 P/N 40D1N5401	1	EA	$ - 0	$ - 0	$ - 0	50%
0089	Spring Plate P/N 8344717-08	1	EA	$ - 0	$ - 0	$ - 0	50%
0090	3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06	1	EA	$ - 0	$ - 0	$ - 0	25%
0091	2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5	1	EA	$ - 0	$ - 0	$ - 0	1%
0092	4820-12-313-6128, Valve, Check, P/N 8344717-07	1	EA	$ - 0	$ - 0	$ - 0	50%
0093	5310-12-326-4442, Nut, Plain Round, P/N 8344719-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0094	5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04	8	EA	$ - 0	$ - 0	$ - 0	25%
0095	5330-01-228-0929, Ring, P/N 8344717-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0273					$ - 0	$ - 0	25%
0096	Pressure Spring, P/N 8 345 048-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0097	Securing Ring, P/N J4O X 1.75DIN472	1	EA	$ - 0	$ - 0	$ - 0	25%
0098	Actuating Rod, P/N 8 344 721-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0099	2010-01-008-5271, Sliding Guide, P/N 8 344 718-02	4	EA	$ - 0	$ - 0	$ - 0	10%
0100	Socket Head Cap Screw, P/N M24x6ODIN912	8	EA	$ - 0	$ - 0	$ - 0	75%
0101	2010-12-328-0434, Cap 1080, P/N 8 344 706-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0102	Socket Head Cap Screw, P/N M24x75DIN912	16	EA	$ - 0	$ - 0	$ - 0	75%
0103	Spring, Lock Washer, P/N 24D1N7980	24	EA	$ - 0	$ - 0	$ - 0	25%
0104	3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01	1	EA	$ - 0	$ - 0	$ - 0	1%
0105	5365-12-328-0039, Ring, P/N 8344 718-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0106	5310-12-313-1093, Nut, P/N 8 344 717-05	1	EA	$ - 0	$ - 0	$ - 0	25%
0107	Pin, P/N 20x45DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0108	Locking Screw, P/N 8 371 541-01	2	EA	$ - 0	$ - 0	$ - 0	75%
0109	2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01	1	EA	$ - 0	$ - 0	$ - 0	5%
0110	5310-01-004-2961, Special Nut, P/N 8 344 717-04	1	EA	$ - 0	$ - 0	$ - 0	25%
0111	Stay Bolt, P/N 8344716-04	4	EA	$ - 0	$ - 0	$ - 0	10%
0112	Pin, P/N 12x25DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0113	Cap Nut, P/N 8344717-01	4	EA	$ - 0	$ - 0	$ - 0	25%
0114	Threaded Pin, P/N D1N417	1	EA	$ - 0	$ - 0	$ - 0	25%
0115	Locking Device, P/N 8344700-00 Piece 20	1	EA	$ - 0	$ - 0	$ - 0	25%
0116	Special Screw, P/N 8344717-03	1	EA	$ - 0	$ - 0	$ - 0	75%
0117	Tip, P/N 8344707-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0118	Securing Washer, P/N 12.2N2660	1	EA	$ - 0	$ - 0	$ - 0	25%
0119	Locking Screw, P/N R5/8x2ON2233	2	EA	$ - 0	$ - 0	$ - 0	75%
0120	Threaded Pin, P/N DIN417	1	EA	$ - 0	$ - 0	$ - 0	25%
0121	Locking Plate, P/N 8 344 719-06	4	EA	$ - 0	$ - 0	$ - 0	50%
0122	Hex Screw, P/N DIN933	8	EA	$ - 0	$ - 0	$ - 0	75%
0123	Hex Screw, P/N 1/2-13UNC-3Ax20	1	EA	$ - 0	$ - 0	$ - 0	75%
0124	Locking Screw, P/N 3/4 NPTF	2	EA	$ - 0	$ - 0	$ - 0	75%
0125	Threaded Pin, P/N DIN 417	1	EA	$ - 0	$ - 0	$ - 0	25%
0126	5310-12-326-4441, Special Nut, P/N 8 344 720-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0127	Bush 23"DIA., P/N 8 344 714-01	1	EA	$ - 0	$ - 0	$ - 0	50%
0128	Wire 1/8” Monel, P/N 8344700-00 Piece 23	3	FT	$ - 0	$ - 0	$ - 0	50%
0129	Wire 1/16” Monel, P/N 8344700-00 Piece 59	2	FT	$ - 0	$ - 0	$ - 0	50%
0130	Locking Screw, 3/4”- NPTF P/N 8344700-00, Piece 81	1	EA	$ - 0	$ - 0	$ - 0	75%
0131	Locking Screw, 1/2” – 13 UNC – 2A, P/N 8344700-00 Piece 80	2	EA	$ - 0	$ - 0	$ - 0	75%
0132	New Shipping Container for Hub Type 1, Style B	1	EA	$ - 0	$ - 0	$ - 0	50%

Estimate for Type 1, Style A Hub	1	P/YR	$ - 0
Estimate for Type 1, Style B Hub	1	P/YR	$ - 0
Total Estimate for Type 1 Hubs (378EW)			$ - 0

GOVERNMENT COST ESTIMATE CPP HUB REPAIR

270 Base

CLIN	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 270 WMEC, TYPE 3 STYLE A, NSN 2010-01-119-5469
0301	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SET	$ - 0	$ - 0
0302	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SET	$ - 0	$ - 0
0303	Hub Assembly, NSN 2010-01-119-5469, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0304	Non-Repairable Hub Assembly, NSN 2010-01-119-5469, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE A, NSN 2010-01-119-5469			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0305	5330-01-118-8529, Packing, Preformed, P/N OR 434-15	4	EA	$ - 0	$ - 0	$ - 0	100%
0306	5330-01-120-5229, 0-Ring, P/N OR 445-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0307	0-Ring, P/N 3-12	4	EA	$ - 0	$ - 0	$ - 0	100%
0308	0-Ring, P/N 0R42-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0309	0-Ring, P/N 0R39-6	1	EA	$ - 0	$ - 0	$ - 0	100%
0310	0-Ring, P/N 0R28.2-3.5	4	EA	$ - 0	$ - 0	$ - 0	100%
0311	0-Ring, P/N 0R215-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0312	O-Ring, P/N 0R650-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0313	0-Ring, P/N 0R594-10	1	EA	$ - 0	$ - 0	$ - 0	100%
0314	0-Ring, P/N 0R55-5	1	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE A, NSN 2010-01-119-5469
0315	3040-01-377-2071, Connecting Link, Rigid, L.H., P/N 8350207	4	EA	$ - 0	$ - 0	$ - 0	10%
0316	2010-01-335-2300, Trunnion, L.H., P/N 8350211	4	EA	$ - 0	$ - 0	$ - 0	70%
0317	2010-01-376-4310, Crank, Disk L.H., P/N 8350205	4	EA	$ - 0	$ - 0	$ - 0	50%
0318	2010-01-376-0134, Bushing, P/N 8377012	4	EA	$ - 0	$ - 0	$ - 0	50%
0319	3120-01-375-9844, Bearing, Segment, P/N 8377965	20	EA	$ - 0	$ - 0	$ - 0	50%
0320	5310-01-376-4150, Nut, Self Locking, P/N 8 350 256	4	EA	$ - 0	$ - 0	$ - 0	25%
0321	5315-01-375-9944, Pin, Straight, Headless, P/N 8377011	8	EA	$ - 0	$ - 0	$ - 0	25%
0322	2010-01-336-6135, Cap Assy., P/N 8-350-202	1	EA	$ - 0	$ - 0	$ - 0	1%
0323	Lock Rod, 3/16” Dia., Bronze, P/N CDA360	100	IN	$ - 0	$ - 0	$ - 0	50%
0324	Flat Head Screw, P/N 1/2x20UNFx.5 Long	45	EA	$ - 0	$ - 0	$ - 0	75%
0325	Hex Plug, Hollow , P/N 8HP5ON-55	4	EA	$ - 0	$ - 0	$ - 0	75%
0326	Nut, Actuating Rod, P/N 8-349994	1	EA	$ - 0	$ - 0	$ - 0	25%
0327	Locking Screw, P/N 8376803	1	EA	$ - 0	$ - 0	$ - 0	75%
0328	Servo Motor Piston, P/N 8350260	1	EA	$ - 0	$ - 0	$ - 0	1%
0329	Lock Rod, 3/16” Dia., Type 321 S/S	100	IN	$ - 0	$ - 0	$ - 0	50%
0330	Hex Socket Set Screw, P/N 3/4 x 10 x 25mm	1	EA	$ - 0	$ - 0	$ - 0	75%
0331	Socket Head Cap Screw, P/N M30 x 75	24	EA	$ - 0	$ - 0	$ - 0	75%
0332	Slide Ring, P/N HS11018	1	EA	$ - 0	$ - 0	$ - 0	50%
0333	Slide Ring, P/N HS110l1	1	EA	$ - 0	$ - 0	$ - 0	50%
0334	Actuating Rod, P/N 8 350 203	1	EA	$ - 0	$ - 0	$ - 0	5%
0335	Locking Pin, P/N 8 376 966	6	EA	$ - 0	$ - 0	$ - 0	25%
0336	Set Screw, P/N M8 x 12	24	EA	$ - 0	$ - 0	$ - 0	75%
0337	2010-01-377-2280, Bushing, P/N 8 376 750	1	EA	$ - 0	$ - 0	$ - 0	50%
0338	Propeller Hub, P/N 8 350 201	1	EA	$ - 0	$ - 0	$ - 0	1%
0339	2010-01-376-0135, Bushing, P/N 8 350 049	1	EA	$ - 0	$ - 0	$ - 0	50%
0340	Socket Head Cap Screw, P/N M10 x 30	8	EA	$ - 0	$ - 0	$ - 0	75%
0341	Check Valve Assy., P/N 8 350 094	1	EA	$ - 0	$ - 0	$ - 0	50%
0342	Hex Screw, P/N M8 x 16	16	EA	$ - 0	$ - 0	$ - 0	75%
0343	Lock Rod, 5/16” Dia., Bronze CDA 360	52	IN	$ - 0	$ - 0	$ - 0	50%
0344	Acorn Nut, P/N 8 377 017	4	EA	$ - 0	$ - 0	$ - 0	75%
0345	Guide Rod, P/N 8 377 013	4	EA	$ - 0	$ - 0	$ - 0	10%
0346	Set Screw, P/N M6 x 12	28	EA	$ - 0	$ - 0	$ - 0	75%
0347	3120-01-376-4194, Collar Bushing, P/N 8 376 802	4	EA	$ - 0	$ - 0	$ - 0	50%
0348	Lock Rod, 1/8” Dia., Type 321 Stainless Steel	24	IN	$ - 0	$ - 0	$ - 0	50%
0349	Socket Head Cap Screw, P/N M27 x 60	4	EA	$ - 0	$ - 0	$ - 0	75%
0350	Guide Flange, P/N 8 349 993	1	EA	$ - 0	$ - 0	$ - 0	25%
0351	Hex Screw, P/N M12 x 20	8	EA	$ - 0	$ - 0	$ - 0	75%
0352	Locking Plate, P/N 8 376 745	4	EA	$ - 0	$ - 0	$ - 0	50%
0353	3120-01-375-9845, Collar Bushing, P/N 8 350 015	4	EA	$ - 0	$ - 0	$ - 0	50%
0354	Pin, P/N 8376965	4	EA	$ - 0	$ - 0	$ - 0	25%
0355	Hub Oil Tube, P/N 8350213	1	EA	$ - 0	$ - 0	$ - 0	5%
0356	Pin, P/N, 8376968	4	EA	$ - 0	$ - 0	$ - 0	25%
0357	Locking Plate, P/N 8376746	8	EA	$ - 0	$ - 0	$ - 0	50%
0358	Screw Plug, P/N 8376759	1	EA	$ - 0	$ - 0	$ - 0	75%
0359	Pipe, P/N 8376760	1	EA	$ - 0	$ - 0	$ - 0	10%
0360	New Shipping Container for Hub Type 3, Style A	1	EA	$ - 0	$ - 0	$ - 0	50%

	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 270 WMEC, TYPE 3, STYLE B, NSN 2010-01-118-8538
0361	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0362	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0363	Hub Assembly, NSN 2010-01-118-8538, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0364	Non-Repairable Hub Assembly, NSN 2010-01-118-8538, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE B, NSN - 2010-01-118-8538			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0365	5330-01-118-8529, Packing, Preformed, P/N OR 434-15	4	EA	$ - 0	$ - 0	$ - 0	100%
0366	5330-01-120-5229, 0-Ring, P/N OR 445-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0367	0-Ring, P/N 3-12	4	EA	$ - 0	$ - 0	$ - 0	100%
0368	0-Ring, P/N 0R42-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0369	0-Ring, P/N 0R39-6	1	EA	$ - 0	$ - 0	$ - 0	100%
0370	0-Ring, P/N 0R28.2-3.5	4	EA	$ - 0	$ - 0	$ - 0	100%
0371	0-Ring, P/N 0R215-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0372	O-Ring, P/N 0R650-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0373	0-Ring, P/N 0R594-10	1	EA	$ - 0	$ - 0	$ - 0	100%
0374	0-Ring, P/N 0R55-5	1	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE B, NSN 2010-01-118-8538
0375	3040-01-377-2042, Connecting Link, Rigid, R.H., P/N 8350206	4	EA	$ - 0	$ - 0	$ - 0	10%
0376	2010-01-335-2299, Trunnion, R.H., P/N 8350210	4	EA	$ - 0	$ - 0	$ - 0	70%
0377	2010-01-376-0440, Crank Ring R.H., P/N 8350204	4	EA	$ - 0	$ - 0	$ - 0	50%
0378	2010-01-376-0134, Bushing, P/N 8377012	4	EA	$ - 0	$ - 0	$ - 0	50%
0379	3120-01-375-9844, Bearing, Segment, P/N 8377965	20	EA	$ - 0	$ - 0	$ - 0	50%
0380	5310-01-376-4150, Nut, Self Locking, P/N 8 350 256	4	EA	$ - 0	$ - 0	$ - 0	25%
0381	5315-01-375-9944, Pin, Straight, Headless, P/N 8377011	8	EA	$ - 0	$ - 0	$ - 0	25%
0382	2010-01-336-6135, Cap Assy., P/N 8-350-202	1	EA	$ - 0	$ - 0	$ - 0	1%
0383	Lock Rod, 3/16” Dia., Bronze, P/N CDA360	100	IN	$ - 0	$ - 0	$ - 0	50%
0384	Flat Head Screw, P/N 1/2x20UNFx.5 Long	45	EA	$ - 0	$ - 0	$ - 0	75%
0385	Hex Plug, Hollow , P/N 8HP5ON-55	4	EA	$ - 0	$ - 0	$ - 0	75%
0386	Nut, Actuating Rod, P/N 8-349994	1	EA	$ - 0	$ - 0	$ - 0	25%
0387	Locking Screw, P/N 8376803	1	EA	$ - 0	$ - 0	$ - 0	75%
0388	Servo Motor Piston, P/N 8350260	1	EA	$ - 0	$ - 0	$ - 0	1%
0389	Lock Rod, 3/16” Dia., Type 321 S/S	100	IN	$ - 0	$ - 0	$ - 0	50%
0390	Hex Socket Set Screw, P/N 3/4 x 10 x 25mm	1	EA	$ - 0	$ - 0	$ - 0	75%
0391	Socket Head Cap Screw, P/N M30 x 75	24	EA	$ - 0	$ - 0	$ - 0	75%
0392	Slide Ring, P/N HS11018	1	EA	$ - 0	$ - 0	$ - 0	50%
0393	Slide Ring, P/N HS110l1	1	EA	$ - 0	$ - 0	$ - 0	50%
0394	Actuating Rod, P/N 8 350 203	1	EA	$ - 0	$ - 0	$ - 0	5%
0395	Locking Pin, P/N 8 376 966	6	EA	$ - 0	$ - 0	$ - 0	25%
0396	Set Screw, P/N M8 x 12	24	EA	$ - 0	$ - 0	$ - 0	75%
0397	2010-01-377-2280, Bushing, P/N 8 376 750	1	EA	$ - 0	$ - 0	$ - 0	50%
0398	Propeller Hub, P/N 8 350 201	1	EA	$ - 0	$ - 0	$ - 0	1%
0399	2010-01-376-0135, Bushing, P/N 8 350 049	1	EA	$ - 0	$ - 0	$ - 0	50%
0400	Socket Head Cap Screw, P/N M10 x 30	8	EA	$ - 0	$ - 0	$ - 0	75%
0401	Check Valve Assy., P/N 8 350 094	1	EA	$ - 0	$ - 0	$ - 0	50%
0402	Hex Screw, P/N M8 x 16	16	EA	$ - 0	$ - 0	$ - 0	75%
0403	Lock Rod, 5/16” Dia., Bronze CDA 360	52	IN	$ - 0	$ - 0	$ - 0	50%
0404	Acorn Nut, P/N 8 377 017	4	EA	$ - 0	$ - 0	$ - 0	75%
0405	Guide Rod, P/N 8 377 013	4	EA	$ - 0	$ - 0	$ - 0	10%
0406	Set Screw, P/N M6 x 12	28	EA	$ - 0	$ - 0	$ - 0	75%
0407	3120-01-376-4194, Collar Bushing, P/N 8 376 802	4	EA	$ - 0	$ - 0	$ - 0	50%
0408	Lock Rod, 1/8” Dia., Type 321 Stainless Steel	24	IN	$ - 0	$ - 0	$ - 0	50%
0409	Socket Head Cap Screw, P/N M27 x 60	4	EA	$ - 0	$ - 0	$ - 0	75%
0410	Guide Flange, P/N 8 349 993	1	EA	$ - 0	$ - 0	$ - 0	25%
0411	Hex Screw, P/N M12 x 20	8	EA	$ - 0	$ - 0	$ - 0	75%
0412	Locking Plate, P/N 8 376 745	4	EA	$ - 0	$ - 0	$ - 0	50%
0413	3120-01-375-9845, Collar Bushing, P/N 8 350 015	4	EA	$ - 0	$ - 0	$ - 0	50%
0414	Pin, P/N 8376965	4	EA	$ - 0	$ - 0	$ - 0	25%
0415	Hub Oil Tube, P/N 8350213	1	EA	$ - 0	$ - 0	$ - 0	5%
0416	Pin, P/N, 8376968	4	EA	$ - 0	$ - 0	$ - 0	25%
0417	Locking Plate, P/N 8376746	8	EA	$ - 0	$ - 0	$ - 0	50%
0418	Screw Plug, P/N 8376759	1	EA	$ - 0	$ - 0	$ - 0	75%
0419	Pipe, P/N 8376760	1	EA	$ - 0	$ - 0	$ - 0	10%
0420	New Shipping Container for Hub Type 3, Style B	1	EA	$ - 0	$ - 0	$ - 0	50%

Estimate for Type 3, Style A Hub	1	P/YR	$ - 0
Estimate for Type 3, Style B Hub	1	P/YR	$ - 0
Total Estimate for Type 3 Hubs (270EW)			$ - 0

378 OY1

	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
0001	For Approval, Arrival and Final Inspection/Test Plan Reporting Formats in accordance with specification R-245-0155, Sections 3.3.1 and 3.3.2.	1	EA	NSP	NSP
0002	For Approval, Qualification and Certification of Thermal Spray Procedures and Personnel for Type 6 Hubs in accordance with specification R-240-0419, section 3.4 as referenced in section 2.3.1.a of specification R-245-0155.	1	EA	NSP	NSP
	HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892
0003	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0004	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
005	Hub Assembly, NSN 2010-12-307-6892, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0006	Non-Repairable Hub Assembly, NSN 2010-12-307-6892, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0007	5330-01-377-2097, Seal, Nonmetallic, P/N R505-25	4	EA	$ - 0	$ - 0	$ - 0	100%
0008	Sealing Ring, P/N R100-10	4	EA	$ - 0	$ - 0	$ - 0	100%
0009	Sealing Ring, P/N 8 x 3230	1	EA	$ - 0	$ - 0	$ - 0	100%
0010	Gasket, P/N 31/26 x 2	6	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892
0011	2010-01-006-4716, Crank Ring, L.H., P/N 8344707-02-CCW	4	EA	$ - 0	$ - 0	$ - 0	50%
0012	2010-01-024-2871, Blade Trunion, L.H, P/N 8344701-00-PIECE-76	4	EA	$ - 0	$ - 0	$ - 0	70%
0013	5340-12-328-0234, Sliding Block, P/N 8344717-09	4	EA	$ - 0	$ - 0	$ - 0	50%
0014	5330-12-328-0235, Ring, Piston, P/N SU 800	4	EA	$ - 0	$ - 0	$ - 0	25%
0015	2010-12-184-1507, Bushing Sleeve, P/N 8344716-02	4	EA	$ - 0	$ - 0	$ - 0	50%
0016	Fitting Key, P/N 10X8X30 DIN 3105	8	EA	$ - 0	$ - 0	$ - 0	25%
0017	Strap, 705X30X120 P/N 8344718-04	4	EA	$ - 0	$ - 0	$ - 0	5%
0018	Strap, 705X30X120 P/N 8344718-03	4	EA	$ - 0	$ - 0	$ - 0	5%
0019	Securing Ring, P/N A70X2.5 DIN 471	16	EA	$ - 0	$ - 0	$ - 0	50%
0020	3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03	4	EA	$ - 0	$ - 0	$ - 0	50%
0021	3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03	1	EA	$ - 0	$ - 0	$ - 0	50%
0022	3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05	8	EA	$ - 0	$ - 0	$ - 0	50%
0023	Ball 400 P/N 40D1N5401	1	EA	$ - 0	$ - 0	$ - 0	50%
0024	Spring Plate P/N 8344717-08	1	EA	$ - 0	$ - 0	$ - 0	50%
0025	3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06	1	EA	$ - 0	$ - 0	$ - 0	25%
0026	2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5	1	EA	$ - 0	$ - 0	$ - 0	1%
0027	4820-12-313-6128, Valve, Check, P/N 8344717-07	1	EA	$ - 0	$ - 0	$ - 0	50%
0028	5310-12-326-4442, Nut, Plain Round, P/N 8344719-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0029	5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04	8	EA	$ - 0	$ - 0	$ - 0	25%
0030	5330-01-228-0929, Ring, P/N 8344717-02	4	EA	$ - 0	$ - 0	$ - 0	25%
					$ - 0	$ - 0	25%
0031	Pressure Spring, P/N 8 345 048-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0032	Securing Ring, P/N J4O X 1.75DIN472	1	EA	$ - 0	$ - 0	$ - 0	25%
0033	Actuating Rod, P/N 8 344 721-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0034	2010-01-008-5271, Sliding Guide, P/N 8 344 718-02	4	EA	$ - 0	$ - 0	$ - 0	10%
0035	Socket Head Cap Screw, P/N M24x6ODIN912	8	EA	$ - 0	$ - 0	$ - 0	75%
0036	2010-12-328-0434, Cap 1080, P/N 8 344 706-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0037	Socket Head Cap Screw, P/N M24x75DIN912	16	EA	$ - 0	$ - 0	$ - 0	75%
0038	Spring, Lock Washer, P/N 24D1N7980	24	EA	$ - 0	$ - 0	$ - 0	25%
0039	3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01	1	EA	$ - 0	$ - 0	$ - 0	1%
0040	5365-12-328-0039, Ring, P/N 8344 718-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0041	5310-12-313-1093, Nut, P/N 8 344 717-05	1	EA	$ - 0	$ - 0	$ - 0	25%
0042	Pin, P/N 20x45DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0043	Locking Screw, P/N 8 371 541-01	2	EA	$ - 0	$ - 0	$ - 0	75%
0044	2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01	1	EA	$ - 0	$ - 0	$ - 0	5%
0045	5310-01-004-2961, Special Nut, P/N 8 344 717-04	1	EA	$ - 0	$ - 0	$ - 0	25%
0046	Stay Bolt, P/N 8344716-04	4	EA	$ - 0	$ - 0	$ - 0	10%
0047	Pin, P/N 12x25DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0048	Cap Nut, P/N 8344717-01	4	EA	$ - 0	$ - 0	$ - 0	25%
0049	Threaded Pin, P/N D1N417	1	EA	$ - 0	$ - 0	$ - 0	25%
0050	Locking Device, P/N 8344700-00 Piece 20	1	EA	$ - 0	$ - 0	$ - 0	25%
0051	Special Screw, P/N 8344717-03	1	EA	$ - 0	$ - 0	$ - 0	75%
0052	Tip, P/N 8344707-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0053	Securing Washer, P/N 12.2N2660	1	EA	$ - 0	$ - 0	$ - 0	25%
0054	Locking Screw, P/N R5/8x2ON2233	2	EA	$ - 0	$ - 0	$ - 0	75%
0055	Threaded Pin, P/N DIN417	1	EA	$ - 0	$ - 0	$ - 0	25%
0056	Locking Plate, P/N 8 344 719-06	4	EA	$ - 0	$ - 0	$ - 0	50%
0057	Hex Screw, P/N DIN933	8	EA	$ - 0	$ - 0	$ - 0	75%
0058	Hex Screw, P/N 1/2-13UNC-3Ax20	1	EA	$ - 0	$ - 0	$ - 0	75%
0059	Locking Screw, P/N 3/4 NPTF	2	EA	$ - 0	$ - 0	$ - 0	75%
0060	Threaded Pin, P/N DIN 417	1	EA	$ - 0	$ - 0	$ - 0	25%
0061	5310-12-326-4441, Special Nut, P/N 8 344 720-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0062	Bush 23"DIA., P/N 8 344 714-01	1	EA	$ - 0	$ - 0	$ - 0	50%
0063	Wire 1/8” Monel, P/N 8344700-00 Piece 23	3	FT	$ - 0	$ - 0	$ - 0	50%
0064	Wire 1/16” Monel, P/N 8344700-00 Piece 59	2	FT	$ - 0	$ - 0	$ - 0	50%
0065	Locking Screw, 3/4”- NPTF P/N 8344700-00, Piece 81	1	EA	$ - 0	$ - 0	$ - 0	75%
0066	Locking Screw, 1/2” – 13 UNC – 2A, P/N 8344700-00 Piece 80	2	EA	$ - 0	$ - 0	$ - 0	75%
0067	New Shipping Container for Hub Type 1, Style A	1	EA	$ - 0	$ - 0	$ - 0	50%

	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891
0068	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0069	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0070	Hub Assembly, NSN 2010-12-307-6891, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0071	Non-Repairable Hub Assembly, NSN 2010-12-307-6891, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0072	5330-01-377-2097, Seal, Nonmetallic, P/N R505-25	4	EA	$ - 0	$ - 0	$ - 0	100%
0073	Sealing Ring, P/N R100-10	4	EA	$ - 0	$ - 0	$ - 0	100%
0074	Sealing Ring, P/N 8 x 3230	1	EA	$ - 0	$ - 0	$ - 0	100%
0075	Gasket, P/N 31/26 x 2	6	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891
0076	2010-01-503-1780, Crank Ring, R.H., P/N 8344707-02-CW	4	EA	$ - 0	$ - 0	$ - 0	50%
0077	2010-12-191-2667, Blade Trunion, R.H, P/N 8344719-07	4	EA	$ - 0	$ - 0	$ - 0	70%
0078	5340-12-328-0234, Sliding Block, P/N 8344717-09	4	EA	$ - 0	$ - 0	$ - 0	50%
0079	5330-12-328-0235, Ring, Piston, P/N SU 800	4	EA	$ - 0	$ - 0	$ - 0	25%
0080	2010-12-184-1507, Bushing Sleeve, P/N 8344716-02	4	EA	$ - 0	$ - 0	$ - 0	50%
0081	Fitting Key, P/N 10X8X30 DIN 3105	8	EA	$ - 0	$ - 0	$ - 0	25%
0082	Strap, 705X30X120 P/N 8344718-04	4	EA	$ - 0	$ - 0	$ - 0	5%
0083	Strap, 705X30X120 P/N 8344718-03	4	EA	$ - 0	$ - 0	$ - 0	5%
0084	Securing Ring, P/N A70X2.5 DIN 471	16	EA	$ - 0	$ - 0	$ - 0	50%
0085	3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03	4	EA	$ - 0	$ - 0	$ - 0	50%
0086	3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03	1	EA	$ - 0	$ - 0	$ - 0	50%
0087	3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05	8	EA	$ - 0	$ - 0	$ - 0	50%
0088	Ball 400 P/N 40D1N5401	1	EA	$ - 0	$ - 0	$ - 0	50%
0089	Spring Plate P/N 8344717-08	1	EA	$ - 0	$ - 0	$ - 0	50%
0090	3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06	1	EA	$ - 0	$ - 0	$ - 0	25%
0091	2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5	1	EA	$ - 0	$ - 0	$ - 0	1%
0092	4820-12-313-6128, Valve, Check, P/N 8344717-07	1	EA	$ - 0	$ - 0	$ - 0	50%
0093	5310-12-326-4442, Nut, Plain Round, P/N 8344719-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0094	5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04	8	EA	$ - 0	$ - 0	$ - 0	25%
0095	5330-01-228-0929, Ring, P/N 8344717-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0273					$ - 0	$ - 0	25%
0096	Pressure Spring, P/N 8 345 048-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0097	Securing Ring, P/N J4O X 1.75DIN472	1	EA	$ - 0	$ - 0	$ - 0	25%
0098	Actuating Rod, P/N 8 344 721-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0099	2010-01-008-5271, Sliding Guide, P/N 8 344 718-02	4	EA	$ - 0	$ - 0	$ - 0	10%
0100	Socket Head Cap Screw, P/N M24x6ODIN912	8	EA	$ - 0	$ - 0	$ - 0	75%
0101	2010-12-328-0434, Cap 1080, P/N 8 344 706-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0102	Socket Head Cap Screw, P/N M24x75DIN912	16	EA	$ - 0	$ - 0	$ - 0	75%
0103	Spring, Lock Washer, P/N 24D1N7980	24	EA	$ - 0	$ - 0	$ - 0	25%
0104	3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01	1	EA	$ - 0	$ - 0	$ - 0	1%
0105	5365-12-328-0039, Ring, P/N 8344 718-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0106	5310-12-313-1093, Nut, P/N 8 344 717-05	1	EA	$ - 0	$ - 0	$ - 0	25%
0107	Pin, P/N 20x45DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0108	Locking Screw, P/N 8 371 541-01	2	EA	$ - 0	$ - 0	$ - 0	75%
0109	2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01	1	EA	$ - 0	$ - 0	$ - 0	5%
0110	5310-01-004-2961, Special Nut, P/N 8 344 717-04	1	EA	$ - 0	$ - 0	$ - 0	25%
0111	Stay Bolt, P/N 8344716-04	4	EA	$ - 0	$ - 0	$ - 0	10%
0112	Pin, P/N 12x25DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0113	Cap Nut, P/N 8344717-01	4	EA	$ - 0	$ - 0	$ - 0	25%
0114	Threaded Pin, P/N D1N417	1	EA	$ - 0	$ - 0	$ - 0	25%
0115	Locking Device, P/N 8344700-00 Piece 20	1	EA	$ - 0	$ - 0	$ - 0	25%
0116	Special Screw, P/N 8344717-03	1	EA	$ - 0	$ - 0	$ - 0	75%
0117	Tip, P/N 8344707-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0118	Securing Washer, P/N 12.2N2660	1	EA	$ - 0	$ - 0	$ - 0	25%
0119	Locking Screw, P/N R5/8x2ON2233	2	EA	$ - 0	$ - 0	$ - 0	75%
0120	Threaded Pin, P/N DIN417	1	EA	$ - 0	$ - 0	$ - 0	25%
0121	Locking Plate, P/N 8 344 719-06	4	EA	$ - 0	$ - 0	$ - 0	50%
0122	Hex Screw, P/N DIN933	8	EA	$ - 0	$ - 0	$ - 0	75%
0123	Hex Screw, P/N 1/2-13UNC-3Ax20	1	EA	$ - 0	$ - 0	$ - 0	75%
0124	Locking Screw, P/N 3/4 NPTF	2	EA	$ - 0	$ - 0	$ - 0	75%
0125	Threaded Pin, P/N DIN 417	1	EA	$ - 0	$ - 0	$ - 0	25%
0126	5310-12-326-4441, Special Nut, P/N 8 344 720-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0127	Bush 23"DIA., P/N 8 344 714-01	1	EA	$ - 0	$ - 0	$ - 0	50%
0128	Wire 1/8” Monel, P/N 8344700-00 Piece 23	3	FT	$ - 0	$ - 0	$ - 0	50%
0129	Wire 1/16” Monel, P/N 8344700-00 Piece 59	2	FT	$ - 0	$ - 0	$ - 0	50%
0130	Locking Screw, 3/4”- NPTF P/N 8344700-00, Piece 81	1	EA	$ - 0	$ - 0	$ - 0	75%
0131	Locking Screw, 1/2” – 13 UNC – 2A, P/N 8344700-00 Piece 80	2	EA	$ - 0	$ - 0	$ - 0	75%
0132	New Shipping Container for Hub Type 1, Style B	1	EA	$ - 0	$ - 0	$ - 0	50%

Estimate for Type 1, Style A Hub	1	P/YR	$ - 0
Estimate for Type 1, Style B Hub	1	P/YR	$ - 0
Total Estimate for Type 1 Hubs (378EW)			$ - 0

270 OY1

CLIN	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 270 WMEC, TYPE 3 STYLE A, NSN 2010-01-119-5469
0301	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SET	$ - 0	$ - 0
0302	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SET	$ - 0	$ - 0
0303	Hub Assembly, NSN 2010-01-119-5469, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0304	Non-Repairable Hub Assembly, NSN 2010-01-119-5469, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE A, NSN 2010-01-119-5469			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0305	5330-01-118-8529, Packing, Preformed, P/N OR 434-15	4	EA	$ - 0	$ - 0	$ - 0	100%
0306	5330-01-120-5229, 0-Ring, P/N OR 445-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0307	0-Ring, P/N 3-12	4	EA	$ - 0	$ - 0	$ - 0	100%
0308	0-Ring, P/N 0R42-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0309	0-Ring, P/N 0R39-6	1	EA	$ - 0	$ - 0	$ - 0	100%
0310	0-Ring, P/N 0R28.2-3.5	4	EA	$ - 0	$ - 0	$ - 0	100%
0311	0-Ring, P/N 0R215-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0312	O-Ring, P/N 0R650-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0313	0-Ring, P/N 0R594-10	1	EA	$ - 0	$ - 0	$ - 0	100%
0314	0-Ring, P/N 0R55-5	1	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE A, NSN 2010-01-119-5469
0315	3040-01-377-2071, Connecting Link, Rigid, L.H., P/N 8350207	4	EA	$ - 0	$ - 0	$ - 0	10%
0316	2010-01-335-2300, Trunnion, L.H., P/N 8350211	4	EA	$ - 0	$ - 0	$ - 0	70%
0317	2010-01-376-4310, Crank, Disk L.H., P/N 8350205	4	EA	$ - 0	$ - 0	$ - 0	50%
0318	2010-01-376-0134, Bushing, P/N 8377012	4	EA	$ - 0	$ - 0	$ - 0	50%
0319	3120-01-375-9844, Bearing, Segment, P/N 8377965	20	EA	$ - 0	$ - 0	$ - 0	50%
0320	5310-01-376-4150, Nut, Self Locking, P/N 8 350 256	4	EA	$ - 0	$ - 0	$ - 0	25%
0321	5315-01-375-9944, Pin, Straight, Headless, P/N 8377011	8	EA	$ - 0	$ - 0	$ - 0	25%
0322	2010-01-336-6135, Cap Assy., P/N 8-350-202	1	EA	$ - 0	$ - 0	$ - 0	1%
0323	Lock Rod, 3/16” Dia., Bronze, P/N CDA360	100	IN	$ - 0	$ - 0	$ - 0	50%
0324	Flat Head Screw, P/N 1/2x20UNFx.5 Long	45	EA	$ - 0	$ - 0	$ - 0	75%
0325	Hex Plug, Hollow , P/N 8HP5ON-55	4	EA	$ - 0	$ - 0	$ - 0	75%
0326	Nut, Actuating Rod, P/N 8-349994	1	EA	$ - 0	$ - 0	$ - 0	25%
0327	Locking Screw, P/N 8376803	1	EA	$ - 0	$ - 0	$ - 0	75%
0328	Servo Motor Piston, P/N 8350260	1	EA	$ - 0	$ - 0	$ - 0	1%
0329	Lock Rod, 3/16” Dia., Type 321 S/S	100	IN	$ - 0	$ - 0	$ - 0	50%
0330	Hex Socket Set Screw, P/N 3/4 x 10 x 25mm	1	EA	$ - 0	$ - 0	$ - 0	75%
0331	Socket Head Cap Screw, P/N M30 x 75	24	EA	$ - 0	$ - 0	$ - 0	75%
0332	Slide Ring, P/N HS11018	1	EA	$ - 0	$ - 0	$ - 0	50%
0333	Slide Ring, P/N HS110l1	1	EA	$ - 0	$ - 0	$ - 0	50%
0334	Actuating Rod, P/N 8 350 203	1	EA	$ - 0	$ - 0	$ - 0	5%
0335	Locking Pin, P/N 8 376 966	6	EA	$ - 0	$ - 0	$ - 0	25%
0336	Set Screw, P/N M8 x 12	24	EA	$ - 0	$ - 0	$ - 0	75%
0337	2010-01-377-2280, Bushing, P/N 8 376 750	1	EA	$ - 0	$ - 0	$ - 0	50%
0338	Propeller Hub, P/N 8 350 201	1	EA	$ - 0	$ - 0	$ - 0	1%
0339	2010-01-376-0135, Bushing, P/N 8 350 049	1	EA	$ - 0	$ - 0	$ - 0	50%
0340	Socket Head Cap Screw, P/N M10 x 30	8	EA	$ - 0	$ - 0	$ - 0	75%
0341	Check Valve Assy., P/N 8 350 094	1	EA	$ - 0	$ - 0	$ - 0	50%
0342	Hex Screw, P/N M8 x 16	16	EA	$ - 0	$ - 0	$ - 0	75%
0343	Lock Rod, 5/16” Dia., Bronze CDA 360	52	IN	$ - 0	$ - 0	$ - 0	50%
0344	Acorn Nut, P/N 8 377 017	4	EA	$ - 0	$ - 0	$ - 0	75%
0345	Guide Rod, P/N 8 377 013	4	EA	$ - 0	$ - 0	$ - 0	10%
0346	Set Screw, P/N M6 x 12	28	EA	$ - 0	$ - 0	$ - 0	75%
0347	3120-01-376-4194, Collar Bushing, P/N 8 376 802	4	EA	$ - 0	$ - 0	$ - 0	50%
0348	Lock Rod, 1/8” Dia., Type 321 Stainless Steel	24	IN	$ - 0	$ - 0	$ - 0	50%
0349	Socket Head Cap Screw, P/N M27 x 60	4	EA	$ - 0	$ - 0	$ - 0	75%
0350	Guide Flange, P/N 8 349 993	1	EA	$ - 0	$ - 0	$ - 0	25%
0351	Hex Screw, P/N M12 x 20	8	EA	$ - 0	$ - 0	$ - 0	75%
0352	Locking Plate, P/N 8 376 745	4	EA	$ - 0	$ - 0	$ - 0	50%
0353	3120-01-375-9845, Collar Bushing, P/N 8 350 015	4	EA	$ - 0	$ - 0	$ - 0	50%
0354	Pin, P/N 8376965	4	EA	$ - 0	$ - 0	$ - 0	25%
0355	Hub Oil Tube, P/N 8350213	1	EA	$ - 0	$ - 0	$ - 0	5%
0356	Pin, P/N, 8376968	4	EA	$ - 0	$ - 0	$ - 0	25%
0357	Locking Plate, P/N 8376746	8	EA	$ - 0	$ - 0	$ - 0	50%
0358	Screw Plug, P/N 8376759	1	EA	$ - 0	$ - 0	$ - 0	75%
0359	Pipe, P/N 8376760	1	EA	$ - 0	$ - 0	$ - 0	10%
0360	New Shipping Container for Hub Type 3, Style A	1	EA	$ - 0	$ - 0	$ - 0	50%

	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 270 WMEC, TYPE 3, STYLE B, NSN 2010-01-118-8538
0361	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0362	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0363	Hub Assembly, NSN 2010-01-118-8538, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0364	Non-Repairable Hub Assembly, NSN 2010-01-118-8538, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE B, NSN - 2010-01-118-8538			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0365	5330-01-118-8529, Packing, Preformed, P/N OR 434-15	4	EA	$ - 0	$ - 0	$ - 0	100%
0366	5330-01-120-5229, 0-Ring, P/N OR 445-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0367	0-Ring, P/N 3-12	4	EA	$ - 0	$ - 0	$ - 0	100%
0368	0-Ring, P/N 0R42-5	4	EA	$ - 0	$ - 0	$ - 0	100%
0369	0-Ring, P/N 0R39-6	1	EA	$ - 0	$ - 0	$ - 0	100%
0370	0-Ring, P/N 0R28.2-3.5	4	EA	$ - 0	$ - 0	$ - 0	100%
0371	0-Ring, P/N 0R215-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0372	O-Ring, P/N 0R650-7	1	EA	$ - 0	$ - 0	$ - 0	100%
0373	0-Ring, P/N 0R594-10	1	EA	$ - 0	$ - 0	$ - 0	100%
0374	0-Ring, P/N 0R55-5	1	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 270 WMEC, TYPE 3, STYLE B, NSN 2010-01-118-8538
0375	3040-01-377-2042, Connecting Link, Rigid, R.H., P/N 8350206	4	EA	$ - 0	$ - 0	$ - 0	10%
0376	2010-01-335-2299, Trunnion, R.H., P/N 8350210	4	EA	$ - 0	$ - 0	$ - 0	70%
0377	2010-01-376-0440, Crank Ring R.H., P/N 8350204	4	EA	$ - 0	$ - 0	$ - 0	50%
0378	2010-01-376-0134, Bushing, P/N 8377012	4	EA	$ - 0	$ - 0	$ - 0	50%
0379	3120-01-375-9844, Bearing, Segment, P/N 8377965	20	EA	$ - 0	$ - 0	$ - 0	50%
0380	5310-01-376-4150, Nut, Self Locking, P/N 8 350 256	4	EA	$ - 0	$ - 0	$ - 0	25%
0381	5315-01-375-9944, Pin, Straight, Headless, P/N 8377011	8	EA	$ - 0	$ - 0	$ - 0	25%
0382	2010-01-336-6135, Cap Assy., P/N 8-350-202	1	EA	$ - 0	$ - 0	$ - 0	1%
0383	Lock Rod, 3/16” Dia., Bronze, P/N CDA360	100	IN	$ - 0	$ - 0	$ - 0	50%
0384	Flat Head Screw, P/N 1/2x20UNFx.5 Long	45	EA	$ - 0	$ - 0	$ - 0	75%
0385	Hex Plug, Hollow , P/N 8HP5ON-55	4	EA	$ - 0	$ - 0	$ - 0	75%
0386	Nut, Actuating Rod, P/N 8-349994	1	EA	$ - 0	$ - 0	$ - 0	25%
0387	Locking Screw, P/N 8376803	1	EA	$ - 0	$ - 0	$ - 0	75%
0388	Servo Motor Piston, P/N 8350260	1	EA	$ - 0	$ - 0	$ - 0	1%
0389	Lock Rod, 3/16” Dia., Type 321 S/S	100	IN	$ - 0	$ - 0	$ - 0	50%
0390	Hex Socket Set Screw, P/N 3/4 x 10 x 25mm	1	EA	$ - 0	$ - 0	$ - 0	75%
0391	Socket Head Cap Screw, P/N M30 x 75	24	EA	$ - 0	$ - 0	$ - 0	75%
0392	Slide Ring, P/N HS11018	1	EA	$ - 0	$ - 0	$ - 0	50%
0393	Slide Ring, P/N HS110l1	1	EA	$ - 0	$ - 0	$ - 0	50%
0394	Actuating Rod, P/N 8 350 203	1	EA	$ - 0	$ - 0	$ - 0	5%
0395	Locking Pin, P/N 8 376 966	6	EA	$ - 0	$ - 0	$ - 0	25%
0396	Set Screw, P/N M8 x 12	24	EA	$ - 0	$ - 0	$ - 0	75%
0397	2010-01-377-2280, Bushing, P/N 8 376 750	1	EA	$ - 0	$ - 0	$ - 0	50%
0398	Propeller Hub, P/N 8 350 201	1	EA	$ - 0	$ - 0	$ - 0	1%
0399	2010-01-376-0135, Bushing, P/N 8 350 049	1	EA	$ - 0	$ - 0	$ - 0	50%
0400	Socket Head Cap Screw, P/N M10 x 30	8	EA	$ - 0	$ - 0	$ - 0	75%
0401	Check Valve Assy., P/N 8 350 094	1	EA	$ - 0	$ - 0	$ - 0	50%
0402	Hex Screw, P/N M8 x 16	16	EA	$ - 0	$ - 0	$ - 0	75%
0403	Lock Rod, 5/16” Dia., Bronze CDA 360	52	IN	$ - 0	$ - 0	$ - 0	50%
0404	Acorn Nut, P/N 8 377 017	4	EA	$ - 0	$ - 0	$ - 0	75%
0405	Guide Rod, P/N 8 377 013	4	EA	$ - 0	$ - 0	$ - 0	10%
0406	Set Screw, P/N M6 x 12	28	EA	$ - 0	$ - 0	$ - 0	75%
0407	3120-01-376-4194, Collar Bushing, P/N 8 376 802	4	EA	$ - 0	$ - 0	$ - 0	50%
0408	Lock Rod, 1/8” Dia., Type 321 Stainless Steel	24	IN	$ - 0	$ - 0	$ - 0	50%
0409	Socket Head Cap Screw, P/N M27 x 60	4	EA	$ - 0	$ - 0	$ - 0	75%
0410	Guide Flange, P/N 8 349 993	1	EA	$ - 0	$ - 0	$ - 0	25%
0411	Hex Screw, P/N M12 x 20	8	EA	$ - 0	$ - 0	$ - 0	75%
0412	Locking Plate, P/N 8 376 745	4	EA	$ - 0	$ - 0	$ - 0	50%
0413	3120-01-375-9845, Collar Bushing, P/N 8 350 015	4	EA	$ - 0	$ - 0	$ - 0	50%
0414	Pin, P/N 8376965	4	EA	$ - 0	$ - 0	$ - 0	25%
0415	Hub Oil Tube, P/N 8350213	1	EA	$ - 0	$ - 0	$ - 0	5%
0416	Pin, P/N, 8376968	4	EA	$ - 0	$ - 0	$ - 0	25%
0417	Locking Plate, P/N 8376746	8	EA	$ - 0	$ - 0	$ - 0	50%
0418	Screw Plug, P/N 8376759	1	EA	$ - 0	$ - 0	$ - 0	75%
0419	Pipe, P/N 8376760	1	EA	$ - 0	$ - 0	$ - 0	10%
0420	New Shipping Container for Hub Type 3, Style B	1	EA	$ - 0	$ - 0	$ - 0	50%

Estimate for Type 3, Style A Hub	1	P/YR	$ - 0
Estimate for Type 3, Style B Hub	1	P/YR	$ - 0
Total Estimate for Type 3 Hubs (270EW)			$ - 0

378 OY2

CLIN	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
0001	For Approval, Arrival and Final Inspection/Test Plan Reporting Formats in accordance with specification R-245-0155, Sections 3.3.1 and 3.3.2.	1	EA	NSP	NSP
0002	For Approval, Qualification and Certification of Thermal Spray Procedures and Personnel for Type 6 Hubs in accordance with specification R-240-0419, section 3.4 as referenced in section 2.3.1.a of specification R-245-0155.	1	EA	NSP	NSP
	HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892
0003	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0004	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
005	Hub Assembly, NSN 2010-12-307-6892, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0006	Non-Repairable Hub Assembly, NSN 2010-12-307-6892, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0007	5330-01-377-2097, Seal, Nonmetallic, P/N R505-25	4	EA	$ - 0	$ - 0	$ - 0	100%
0008	Sealing Ring, P/N R100-10	4	EA	$ - 0	$ - 0	$ - 0	100%
0009	Sealing Ring, P/N 8 x 3230	1	EA	$ - 0	$ - 0	$ - 0	100%
0010	Gasket, P/N 31/26 x 2	6	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE A, NSN 2010-12-307-6892
0011	2010-01-006-4716, Crank Ring, L.H., P/N 8344707-02-CCW	4	EA	$ - 0	$ - 0	$ - 0	50%
0012	2010-01-024-2871, Blade Trunion, L.H, P/N 8344701-00-PIECE-76	4	EA	$ - 0	$ - 0	$ - 0	70%
0013	5340-12-328-0234, Sliding Block, P/N 8344717-09	4	EA	$ - 0	$ - 0	$ - 0	50%
0014	5330-12-328-0235, Ring, Piston, P/N SU 800	4	EA	$ - 0	$ - 0	$ - 0	25%
0015	2010-12-184-1507, Bushing Sleeve, P/N 8344716-02	4	EA	$ - 0	$ - 0	$ - 0	50%
0016	Fitting Key, P/N 10X8X30 DIN 3105	8	EA	$ - 0	$ - 0	$ - 0	25%
0017	Strap, 705X30X120 P/N 8344718-04	4	EA	$ - 0	$ - 0	$ - 0	5%
0018	Strap, 705X30X120 P/N 8344718-03	4	EA	$ - 0	$ - 0	$ - 0	5%
0019	Securing Ring, P/N A70X2.5 DIN 471	16	EA	$ - 0	$ - 0	$ - 0	50%
0020	3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03	4	EA	$ - 0	$ - 0	$ - 0	50%
0021	3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03	1	EA	$ - 0	$ - 0	$ - 0	50%
0022	3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05	8	EA	$ - 0	$ - 0	$ - 0	50%
0023	Ball 400 P/N 40D1N5401	1	EA	$ - 0	$ - 0	$ - 0	50%
0024	Spring Plate P/N 8344717-08	1	EA	$ - 0	$ - 0	$ - 0	50%
0025	3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06	1	EA	$ - 0	$ - 0	$ - 0	25%
0026	2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5	1	EA	$ - 0	$ - 0	$ - 0	1%
0027	4820-12-313-6128, Valve, Check, P/N 8344717-07	1	EA	$ - 0	$ - 0	$ - 0	50%
0028	5310-12-326-4442, Nut, Plain Round, P/N 8344719-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0029	5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04	8	EA	$ - 0	$ - 0	$ - 0	25%
0030	5330-01-228-0929, Ring, P/N 8344717-02	4	EA	$ - 0	$ - 0	$ - 0	25%
					$ - 0	$ - 0	25%
0031	Pressure Spring, P/N 8 345 048-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0032	Securing Ring, P/N J4O X 1.75DIN472	1	EA	$ - 0	$ - 0	$ - 0	25%
0033	Actuating Rod, P/N 8 344 721-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0034	2010-01-008-5271, Sliding Guide, P/N 8 344 718-02	4	EA	$ - 0	$ - 0	$ - 0	10%
0035	Socket Head Cap Screw, P/N M24x6ODIN912	8	EA	$ - 0	$ - 0	$ - 0	75%
0036	2010-12-328-0434, Cap 1080, P/N 8 344 706-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0037	Socket Head Cap Screw, P/N M24x75DIN912	16	EA	$ - 0	$ - 0	$ - 0	75%
0038	Spring, Lock Washer, P/N 24D1N7980	24	EA	$ - 0	$ - 0	$ - 0	25%
0039	3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01	1	EA	$ - 0	$ - 0	$ - 0	1%
0040	5365-12-328-0039, Ring, P/N 8344 718-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0041	5310-12-313-1093, Nut, P/N 8 344 717-05	1	EA	$ - 0	$ - 0	$ - 0	25%
0042	Pin, P/N 20x45DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0043	Locking Screw, P/N 8 371 541-01	2	EA	$ - 0	$ - 0	$ - 0	75%
0044	2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01	1	EA	$ - 0	$ - 0	$ - 0	5%
0045	5310-01-004-2961, Special Nut, P/N 8 344 717-04	1	EA	$ - 0	$ - 0	$ - 0	25%
0046	Stay Bolt, P/N 8344716-04	4	EA	$ - 0	$ - 0	$ - 0	10%
0047	Pin, P/N 12x25DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0048	Cap Nut, P/N 8344717-01	4	EA	$ - 0	$ - 0	$ - 0	25%
0049	Threaded Pin, P/N D1N417	1	EA	$ - 0	$ - 0	$ - 0	25%
0050	Locking Device, P/N 8344700-00 Piece 20	1	EA	$ - 0	$ - 0	$ - 0	25%
0051	Special Screw, P/N 8344717-03	1	EA	$ - 0	$ - 0	$ - 0	75%
0052	Tip, P/N 8344707-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0053	Securing Washer, P/N 12.2N2660	1	EA	$ - 0	$ - 0	$ - 0	25%
0054	Locking Screw, P/N R5/8x2ON2233	2	EA	$ - 0	$ - 0	$ - 0	75%
0055	Threaded Pin, P/N DIN417	1	EA	$ - 0	$ - 0	$ - 0	25%
0056	Locking Plate, P/N 8 344 719-06	4	EA	$ - 0	$ - 0	$ - 0	50%
0057	Hex Screw, P/N DIN933	8	EA	$ - 0	$ - 0	$ - 0	75%
0058	Hex Screw, P/N 1/2-13UNC-3Ax20	1	EA	$ - 0	$ - 0	$ - 0	75%
0059	Locking Screw, P/N 3/4 NPTF	2	EA	$ - 0	$ - 0	$ - 0	75%
0060	Threaded Pin, P/N DIN 417	1	EA	$ - 0	$ - 0	$ - 0	25%
0061	5310-12-326-4441, Special Nut, P/N 8 344 720-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0062	Bush 23"DIA., P/N 8 344 714-01	1	EA	$ - 0	$ - 0	$ - 0	50%
0063	Wire 1/8” Monel, P/N 8344700-00 Piece 23	3	FT	$ - 0	$ - 0	$ - 0	50%
0064	Wire 1/16” Monel, P/N 8344700-00 Piece 59	2	FT	$ - 0	$ - 0	$ - 0	50%
0065	Locking Screw, 3/4”- NPTF P/N 8344700-00, Piece 81	1	EA	$ - 0	$ - 0	$ - 0	75%
0066	Locking Screw, 1/2” – 13 UNC – 2A, P/N 8344700-00 Piece 80	2	EA	$ - 0	$ - 0	$ - 0	75%
0067	New Shipping Container for Hub Type 1, Style A	1	EA	$ - 0	$ - 0	$ - 0	50%

	DESCRIPTION	QUAN		LOADED RATE	COST TOTAL
	HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891
0068	For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0069	For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.	1	SE	$ - 0	$ - 0
0070	Hub Assembly, NSN 2010-12-307-6891, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245-0155.	1	EA	$ - 0	$ - 0
0071	Non-Repairable Hub Assembly, NSN 2010-12-307-6891, Contractor to furnish necessary labor, material, and equipment to prepare for shipment any Hub Assembly not repaired.	1	EA	$ - 0	$ - 0
	MANDATORY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891			COST EACH	X USE FACTOR	COST TOTAL	% USE FACTOR
0072	5330-01-377-2097, Seal, Nonmetallic, P/N R505-25	4	EA	$ - 0	$ - 0	$ - 0	100%
0073	Sealing Ring, P/N R100-10	4	EA	$ - 0	$ - 0	$ - 0	100%
0074	Sealing Ring, P/N 8 x 3230	1	EA	$ - 0	$ - 0	$ - 0	100%
0075	Gasket, P/N 31/26 x 2	6	EA	$ - 0	$ - 0	$ - 0	100%
	CONTINGENCY REPLACEMENT PARTS HUB - 378 WHEC, TYPE 1, STYLE B, NSN 2010-12-307-6891
0076	2010-01-503-1780, Crank Ring, R.H., P/N 8344707-02-CW	4	EA	$ - 0	$ - 0	$ - 0	50%
0077	2010-12-191-2667, Blade Trunion, R.H, P/N 8344719-07	4	EA	$ - 0	$ - 0	$ - 0	70%
0078	5340-12-328-0234, Sliding Block, P/N 8344717-09	4	EA	$ - 0	$ - 0	$ - 0	50%
0079	5330-12-328-0235, Ring, Piston, P/N SU 800	4	EA	$ - 0	$ - 0	$ - 0	25%
0080	2010-12-184-1507, Bushing Sleeve, P/N 8344716-02	4	EA	$ - 0	$ - 0	$ - 0	50%
0081	Fitting Key, P/N 10X8X30 DIN 3105	8	EA	$ - 0	$ - 0	$ - 0	25%
0082	Strap, 705X30X120 P/N 8344718-04	4	EA	$ - 0	$ - 0	$ - 0	5%
0083	Strap, 705X30X120 P/N 8344718-03	4	EA	$ - 0	$ - 0	$ - 0	5%
0084	Securing Ring, P/N A70X2.5 DIN 471	16	EA	$ - 0	$ - 0	$ - 0	50%
0085	3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03	4	EA	$ - 0	$ - 0	$ - 0	50%
0086	3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03	1	EA	$ - 0	$ - 0	$ - 0	50%
0087	3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05	8	EA	$ - 0	$ - 0	$ - 0	50%
0088	Ball 400 P/N 40D1N5401	1	EA	$ - 0	$ - 0	$ - 0	50%
0089	Spring Plate P/N 8344717-08	1	EA	$ - 0	$ - 0	$ - 0	50%
0090	3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06	1	EA	$ - 0	$ - 0	$ - 0	25%
0091	2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5	1	EA	$ - 0	$ - 0	$ - 0	1%
0092	4820-12-313-6128, Valve, Check, P/N 8344717-07	1	EA	$ - 0	$ - 0	$ - 0	50%
0093	5310-12-326-4442, Nut, Plain Round, P/N 8344719-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0094	5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04	8	EA	$ - 0	$ - 0	$ - 0	25%
0095	5330-01-228-0929, Ring, P/N 8344717-02	4	EA	$ - 0	$ - 0	$ - 0	25%
0273					$ - 0	$ - 0	25%
0096	Pressure Spring, P/N 8 345 048-02	1	EA	$ - 0	$ - 0	$ - 0	25%
0097	Securing Ring, P/N J4O X 1.75DIN472	1	EA	$ - 0	$ - 0	$ - 0	25%
0098	Actuating Rod, P/N 8 344 721-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0099	2010-01-008-5271, Sliding Guide, P/N 8 344 718-02	4	EA	$ - 0	$ - 0	$ - 0	10%
0100	Socket Head Cap Screw, P/N M24x6ODIN912	8	EA	$ - 0	$ - 0	$ - 0	75%
0101	2010-12-328-0434, Cap 1080, P/N 8 344 706-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0102	Socket Head Cap Screw, P/N M24x75DIN912	16	EA	$ - 0	$ - 0	$ - 0	75%
0103	Spring, Lock Washer, P/N 24D1N7980	24	EA	$ - 0	$ - 0	$ - 0	25%
0104	3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01	1	EA	$ - 0	$ - 0	$ - 0	1%
0105	5365-12-328-0039, Ring, P/N 8344 718-01	1	EA	$ - 0	$ - 0	$ - 0	25%
0106	5310-12-313-1093, Nut, P/N 8 344 717-05	1	EA	$ - 0	$ - 0	$ - 0	25%
0107	Pin, P/N 20x45DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0108	Locking Screw, P/N 8 371 541-01	2	EA	$ - 0	$ - 0	$ - 0	75%
0109	2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01	1	EA	$ - 0	$ - 0	$ - 0	5%
0110	5310-01-004-2961, Special Nut, P/N 8 344 717-04	1	EA	$ - 0	$ - 0	$ - 0	25%
0111	Stay Bolt, P/N 8344716-04	4	EA	$ - 0	$ - 0	$ - 0	10%
0112	Pin, P/N 12x25DIN7	1	EA	$ - 0	$ - 0	$ - 0	25%
0113	Cap Nut, P/N 8344717-01	4	EA	$ - 0	$ - 0	$ - 0	25%

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.