HSCG40-10-R-30088.pdf

HSCG40-10-R-30088

OMBUDSMAN

NOTICE FOR FILING AGENCY PROTEST

It is the policy of the Coast Guard to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accounting Office (GAO).

Interested parties are encouraged to seek resolution of their concerns within the Coast Guard as an Alternative Dispute Resolution (ADR) forum, rather than filing protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file formal agency protest with the Contracting Officer or Ombudsman.

Informal forum with the Ombudsman. Interested parties who believe that Coast Guard procurement is unfair or otherwise defective should first direct their concerns to the cognizant Contracting Officer. If the Contracting Officer is unable to satisfy the concerns, the interested party is encouraged to contact the Coast Guard Ombudsman for Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable).

Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester’s concerns are unresolved, an independent review is available by the Ombudsman. The protester may file formal agency protest to either the Contracting Officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government.

The agency’s goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth at FAR 33.103(d)(2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. This will not preclude re-filing of the protest to meet the requirement. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be forwarded to the address below:

Commandant (CG-913) U.S. Coast Guard Headquarters

Acquisition Planning and Performance Measurement 1900 Half St. S.W. Room 11-0402

Washington, DC 20593 Telephone (202) 372-3692

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 7900)

RATING PAGE OF PAGES

2. CONTRACT NUMBER 3. SOLICITATION NUMBER 4. TYPE OF SOLICITATION 5. DATE ISSUED 6. REQUISITION/PURCHASE NUMBER

CODE7. ISSUED BY 8. ADDRESS OFFER TO (If other than item 7)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME B. TELEPHONE (NO COLLECT CALLS)

AREA CODE NUMBER EXT.

C. E-MAIL ADDRESS

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTION PAGE(S) (X) SEC. PAGE(S)DESCRIPTION

A B C D E F G H

I

J

K

L

M EVALUATION FACTORS FOR AWARD

INSTRS., CONDS., AND NOTICES TO OFFERORS

REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

LIST OF ATTACHMENTS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/COSTS

DESCRIPTION/SPECS./WORK STATEMENT

PACKAGING AND MARKING

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

CONTRACT ADMINISTRATION DATA

SPECIAL CONTRACT REQUIREMENTS

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

OFFER (Must be fully completed by offeror)

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS(%)

DATEAMENDMENT NO.AMENDMENT NO. DATE

15A. NAME AND

ADDRESS

OF OFFER-

OR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

AREA CODE NUMBER EXT.

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION:

10 U.S.C. 2304 (c) 41 U.S.C. 253 (c)

24. ADMINISTERED BY (If other than Item 7)

26. NAME OF CONTRACTING OFFICER (Type or print)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

25. PAYMENT WILL BE MADE BY

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

CODE

ITEM

STANDARD FORM 33 (REV,. 9-97)

Prescribed by GSA - Far (48 CFR) 53.214 (c)

SEALED BID (IFB)

NEGOTIATED (RFP)

(Hour) (Date)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

1A 77

Toni.J.Cheek@uscg.mil Surface Forces Logistics Center Procurement Branch 2/LREPL 2401 Hawkins Point Road Baltimore MD 21226

HSCG40-10-R-30088

Toni Cheek Toni.J.Cheek@uscg.mil

1 - 1A 2 - 41 44 - 45 46 - 50 51 - 53 54 - 55 73 - 77

68 - 72

56 - 60

410 7626830

US Coast Guard Yard PO Box 4122 Chesapeake, VA 23327-4122

JoAnn T. Yamane

90 calendar days

62 - 67

SECTION B – SUPPLIES OR SERVICES AND PRICES

BASE YEAR

CLIN DESCRIPTION QUAN U/I PRICE EACH TOTAL

For Approval, Inspection/Test Plan and Reporting Formats in accordance with specification R-245- 0155, Sections 3.3.1 and 3.3.2.

SET

NSP

For Approval, Qualification and Certification of Thermal Spray Procedures and Personnel for Type 6 Hubs in accordance with specification R-240-0419, section 3.4 as referenced in section 2.3.1.a of specification R-245-0155.

HUB - 378 WHEC, TYPE 1, STYLE A,

NSN 2010-12-307-6892

For Approval, Arrival Inspection and Pre-Repair Reports in accordance with specification R-245- 0155.

1 SET $ . $ .

For Approval, Final Acceptance Operational Test & Inspection Reports in accordance with specification R-245-0155.

Hub Assembly, NSN 2010-12-307-6892, Tested, Inspected, Preserved, Packaged, Packed, and Marked in accordance with specification R-245- 0155.

EA

Non-Repairable Hub Assembly, NSN 2010-12-307- 6892, Contractor to furnish necessary labor, material and equipment to prepare for shipment any Hub Assembly not repaired.

MANDATORY REPLACEMENT PARTS

NSN - 2010-12-307-6892

5330-01-377-2097, Seal, Nonmetallic, P/N R505-25

0008 Sealing Ring, P/N R100-10 4 EA $ . $ .

0009 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

0010 Gasket, P/N 31/26 x 2 6 EA $ . $ .

CONTINGENCY REPLACEMENT PARTS

2010-01-006-4716, Crank Ring, L.H., P/N 8344707-02-CCW

2010-01-024-2871, Blade Trunion, L.H, P/N 8344719-07

0013 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

0014 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

2010-12-184-1507, Bushing Sleeve, P/N 8344716-02

0016 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

0017 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

0018 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

0019 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

3120-12-194-0774, Bushing, Sleeve, Unfinished, P/N 8344716-03

3120-12-195-6437, Bushing, Sleeve, P/N 8344720-03

3120-12-325-4079, Bearing, Sleeve, P/N 8344719-05

0023 Ball 400 P/N 40D1N5401 1 EA $ . $ .

0024 Spring Plate P/N 8344717-08 1 EA $ . $ .

3130-12-313-3233, Housing, Bearing Unit, P/N 8344717-06

2010-12-328-0997, Hub Case, P/N 8344700-00-

PIECE-5

0027 4820-12-313-6128, Valve, Check, P/N 8344717-07 1 EA $ . $ .

5310-12-326-4442, Nut, Plain Round, P/N 8344719-

5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04

0030 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

0031 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

0032 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

0033 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

2010-01-008-5271, Sliding Guide, P/N 8 344 718-02

0035 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

0036 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

0037 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

0038 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

3040-12-328-0688, Servomotor Piston, P/N 8 344 720-01

0040 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

0041 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

0042 Pin, P/N 20x45DIN7 1 EA $ . $ .

0043 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

2010-12-195-2181, Actuating Cross Head, P/N 8 344 709-01

0045 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

0046 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

0047 Pin, P/N 12x25DIN7 1 EA $ . $ .

0048 Cap Nut, P/N 8344717-01 4 EA $ . $ .

0049 Threaded Pin, P/N D1N417 1 EA $ . $ .

0050 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

0051 Special Screw, P/N 8344717-03 1 EA $ . $ .

0052 Tip, P/N 8344707-01 1 EA $ . $ .

0053 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

0054 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

0055 Threaded Pin, P/N DIN417 1 EA $ . $ .

0056 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

0057 Hex Screw, P/N DIN933 8 EA $ . $ .

0058 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

0059 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

0060 Threaded Pin, P/N DIN 417 1 EA $ . $ .

0061 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

0062 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

0063 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

0064 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

Locking Screw, 3/4”- NPTF P/N 8344700-00, Piece 81

Locking Screw, 1/2” – 13 UNC – 2A, P/N 8344700-00 Piece 80

0067 New Shipping Container for Hub Type 1, Style A 1 EA $ . $ .

HUB - 378 WHEC, TYPE 1, STYLE B,

NSN - 2010-12-307-6891

0155.

Hub Assembly, NSN 2010-12-307-6891, Tested, 6891, Contractor to furnish necessary labor, material

HUB - 378 WHEC, TYPE 1, STYLE B,

0073 Sealing Ring, P/N R100-10 4 EA $ . $ .

0074 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

0075 Gasket, P/N 31/26 x 2 6 EA $ . $ .

CONTINGENCY REPLACEMENT PARTS

2010-01-503-1780, Crank Ring, R.H., P/N 8344707-02-CW

2010-12-191-2667, Blade Trunion, R.H, P/N 8344719-01

0078 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

0079 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

0081 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

0082 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

0083 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

0084 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

0088 Ball 400 P/N 40D1N5401 1 EA $ . $ .

0089 Spring Plate P/N 8344717-08 1 EA $ . $ .

2010-12-328-0997, Hub Case, P/N 8344700-00-PIECE-5

4820-12-313-6128, Valve, Check, P/N 8344717-07

5310-12-326-4442, Nut, Plain Round, P/N 8344719-02

5315-12-194-0617, Pin, Straight, Headless, P/N 8344719-04

0095 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

0096 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

0097 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

0098 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

0100 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

0101 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

0102 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

0103 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

0105 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

0106 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

0107 Pin, P/N 20x45DIN7 1 EA $ . $ .

0108 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

0110 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

0111 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

0112 Pin, P/N 12x25DIN7 1 EA $ . $ .

0113 Cap Nut, P/N 8344717-01 4 EA $ . $ .

0114 Threaded Pin, P/N D1N417 1 EA $ . $ .

0115 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

0116 Special Screw, P/N 8344717-03 1 EA $ . $ .

0117 Tip, P/N 8344707-01 1 EA $ . $ .

0118 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

0119 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

0120 Threaded Pin, P/N DIN417 1 EA $ . $ .

0121 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

0122 Hex Screw, P/N DIN933 8 EA $ . $ .

0123 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

0124 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

0125 Threaded Pin, P/N DIN 417 1 EA $ . $ .

0126 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

0127 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

0128 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

0129 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

Locking Screw, 1/2” - 13 UNC - 2A, 0132 New Shipping Container for Hub Type 1, Style B 1 EA $ . $ .

HUB - 270 WMEC, TYPE 3 STYLE A,

NSN - 2010-01-119-5469

Hub Assembly, NSN 2010-01-119-5469, Tested, Non-Repairable Hub Assembly, NSN 2010-01-119- 5469, Contractor to furnish necessary labor, material

HUB - 270 WMEC, TYPE 3, STYLE A,

5330-01-118-8529, Packing, Preformed, P/N OR 434-15

0306 5330-01-120-5229, 0-Ring, P/N OR 445-5 4 EA $ . $ .

0307 0-Ring, P/N 3-12 4 EA $ . $ .

0308 0-Ring, P/N 0R42-5 4 EA $ . $ .

0309 0-Ring, P/N 0R39-6 1 EA $ . $ .

0310 0-Ring, P/N 0R28.2-3.5 4 EA $ . $ .

0311 0-Ring, P/N 0R215-7 1 EA $ . $ .

0312 O-Ring, P/N 0R650-7 1 EA $ . $ .

0313 0-Ring, P/N 0R594-10 1 EA $ . $ .

0314 0-Ring, P/N 0R55-5 1 EA $ . $ .

3040-01-377-2071, Connecting Link, Rigid, L.H., P/N 8350207

0316 2010-01-335-2300, Trunnion, L.H., P/N 8350211 4 EA $ . $ .

0317 2010-01-376-4310, Crank, Disk L.H., P/N 8350205 4 EA $ . $ .

0318 2010-01-376-0134, Bushing, P/N 8377012 4 EA $ . $ .

3120-01-375-9844, Bearing, Segment, P/N 8377965

5310-01-376-4150, Nut, Self Locking, P/N 8 350 256

5315-01-375-9944, Pin, Straight, Headless, P/N 8377011

0322 2010-01-336-6135, Cap Assy., P/N 8-350-202 1 EA $ . $ .

0323 Lock Rod, 3/16” Dia., Bronze, P/N CDA360 100 IN $ . $ .

0324 Flat Head Screw, P/N 1/2x20UNFx.5 Long 45 EA $ . $ .

0325 Hex Plug, Hollow, P/N 8HP5ON-55 4 EA $ . $ .

0326 Nut, Actuating Rod, P/N 8-349994 1 EA $ . $ .

0327 Locking Screw, P/N 8376803 1 EA $ . $ .

0328 Servo Motor Piston, P/N 8350260 1 EA $ . $ .

0329 Lock Rod, 3/16” Dia., Type 321 S/S 100 IN $ . $ .

0330 Hex Socket Set Screw, P/N 3/4 x 10 x 25mm 1 EA $ . $ .

0331 Socket Head Cap Screw, P/N M30 x 75 24 EA $ . $ .

0332 Slide Ring, P/N HS11018 1 EA $ . $ .

0333 Slide Ring, P/N HS110l1 1 EA $ . $ .

0334 Actuating Rod, P/N 8 350 203 1 EA $ . $ .

0335 Locking Pin, P/N 8 376 966 6 EA $ . $ .

0336 Set Screw, P/N M8 x 12 24 EA $ . $ .

0337 2010-01-377-2280, Bushing, P/N 8 376 750 1 EA $ . $ .

0338 Propeller Hub, P/N 8 350 201 1 EA $ . $ .

0339 2010-01-376-0135, Bushing, P/N 8 350 049 1 EA $ . $ .

0340 Socket Head Cap Screw, P/N M10 x 30 8 EA $ . $ .

0341 Check Valve Assy., P/N 8 350 094 1 EA $ . $ .

0342 Hex Screw, P/N M8 x 16 16 EA $ . $ .

0343 Lock Rod, 5/16” Dia., Bronze CDA 360 52 IN $ . $ .

0344 Acorn Nut, P/N 8 377 017 4 EA $ . $ .

0345 Guide Rod, P/N 8 377 013 4 EA $ . $ .

0346 Set Screw, P/N M6 x 12 28 EA $ . $ .

0347 3120-01-376-4194, Collar Bushing, P/N 8 376 802 4 EA $ . $ .

0348 Lock Rod, 1/8” Dia., Type 321 Stainless Steel 24 IN $ . $ .

0349 Socket Head Cap Screw, P/N M27 x 60 4 EA $ . $ .

0350 Guide Flange, P/N 8 349 993 1 EA $ . $ .

0351 Hex Screw, P/N M12 x 20 8 EA $ . $ .

0352 Locking Plate, P/N 8 376 745 4 EA $ . $ .

0353 3120-01-375-9845, Collar Bushing, P/N 8 350 015 4 EA $ . $ .

0354 Pin, P/N 8376965 4 EA $ . $ .

0355 Hub Oil Tube, P/N 8350213 1 EA $ . $ .

0356 Pin, P/N, 8376968 4 EA $ . $ .

0357 Locking Plate, P/N 8376746 8 EA $ . $ .

0358 Screw Plug, P/N 8376759 1 EA $ . $ .

0359 Pipe, P/N 8376760 1 EA $ . $ .

0360 New Shipping Container for Hub Type 3, Style A 1 EA $ . $ .

HUB - 270 WMEC, TYPE 3, STYLE B,

NSN - 2010-01-118-8538

Hub Assembly, NSN 2010-01-118-8538, Tested, Non-Repairable Hub Assembly, NSN 2010-01-118- 8538, Contractor to furnish necessary labor, material

HUB - 270 WMEC, TYPE 3, STYLE B,

0366 5330-01-120-5229, 0-Ring, P/N OR 445-5 4 EA $ . $ .

0367 0-Ring, P/N 3-12 4 EA $ . $ .

0368 0-Ring, P/N 0R42-5 4 EA $ . $ .

0369 0-Ring, P/N 0R39-6 1 EA $ . $ .

0370 0-Ring, P/N 0R28.2-3.5 4 EA $ . $ .

0371 0-Ring, P/N 0R215-7 1 EA $ . $ .

0372 O-Ring, P/N 0R650-7 1 EA $ . $ .

0373 0-Ring, P/N 0R594-10 1 EA $ . $ .

0374 0-Ring, P/N 0R55-5 1 EA $ . $ .

3040-01-377-2071, Connecting Link, Rigid, R.H., P/N 8350206

0376 2010-01-335-2300, Trunnion, R.H., P/N 8350210 4 EA $ . $ .

0377 2010-01-376-4310, Crank Ring R.H., P/N 8350204 4 EA $ . $ .

0378 2010-01-376-0134, Bushing, P/N 8377012 4 EA $ . $ .

0382 2010-01-336-6135, Cap Assy., P/N 8-350-202 1 EA $ . $ .

0383 Lock Rod, 3/16” Dia., Bronze, P/N CDA360 100 IN $ . $ .

0384 Flat Head Screw, P/N 1/2x20UNFx.5 Long 45 EA $ . $ .

0385 Hex Plug, Hollow, P/N 8HP5ON-55 4 EA $ . $ .

0386 Nut, Actuating Rod, P/N 8-349994 1 EA $ . $ .

0387 Locking Screw, P/N 8376803 1 EA $ . $ .

0388 Servo Motor Piston, P/N 8350260 1 EA $ . $ .

0389 Lock Rod, 3/16” Dia., Type 321 S/S 100 IN $ . $ .

0390 Hex Socket Set Screw, P/N 3/4 x 10 x 25mm 1 EA $ . $ .

0391 Socket Head Cap Screw, P/N M30 x 75 24 EA $ . $ .

0392 Slide Ring, P/N HS11018 1 EA $ . $ .

0393 Slide Ring, P/N HS110l1 1 EA $ . $ .

0394 Actuating Rod, P/N 8 350 203 1 EA $ . $ .

0395 Locking Pin, P/N 8 376 966 6 EA $ . $ .

0396 Set Screw, P/N M8 x 12 24 EA $ . $ .

0397 2010-01-377-2280, Bushing, P/N 8 376 750 1 EA $ . $ .

0398 Propeller Hub, P/N 8 350 201 1 EA $ . $ .

0399 2010-01-376-0135, Bushing, P/N 8 350 049 1 EA $ . $ .

0400 Socket Head Cap Screw, P/N M10 x 30 8 EA $ . $ .

0401 Check Valve Assy., P/N 8 350 094 1 EA $ . $ .

0402 Hex Screw, P/N M8 x 16 16 EA $ . $ .

0403 Lock Rod, 5/16” Dia., Bronze CDA 360 52 IN $ . $ .

0404 Acorn Nut, P/N 8 377 017 4 EA $ . $ .

0405 Guide Rod, P/N 8 377 013 4 EA $ . $ .

0406 Set Screw, P/N M6 x 12 28 EA $ . $ .

0407 3120-01-376-4194, Collar Bushing, P/N 8 376 802 4 EA $ . $ .

0408 Lock Rod, 1/8” Dia., Type 321 Stainless Steel 24 IN $ . $ .

0409 Socket Head Cap Screw, P/N M27 x 60 4 EA $ . $ .

0410 Guide Flange, P/N 8 349 993 1 EA $ . $ .

0411 Hex Screw, P/N M12 x 20 8 EA $ . $ .

0412 Locking Plate, P/N 8 376 745 4 EA $ . $ .

0413 3120-01-375-9845, Collar Bushing, P/N 8 350 015 4 EA $ . $ .

0414 Pin, P/N 8376965 4 EA $ . $ .

0415 Hub Oil Tube, P/N 8350213 1 EA $ . $ .

0416 Pin, P/N, 8376968 4 EA $ . $ .

0417 Locking Plate, P/N 8376746 8 EA $ . $ .

0418 Screw Plug, P/N 8376759 1 EA $ . $ .

0419 Pipe, P/N 8376760 1 EA $ . $ .

0420 New Shipping Container for Hub Type 3, Style B 1 EA $ . $ .

0421 Labor hours for repairs not separately priced

1000 Hours = $__________

0422 Material for items not separately priced *Amount for un-priced material will be negotiated for each delivery order based on supporting documentation provided by the Contractor such as invoices, catalog prices, etc.

1 Each = Not Separately Priced

0423 Contractor Report of Government Property, DHS Form 700-05, in accordance with Section H (Attachment J.4)

0424 SF 294, Subcontracting Report for Individual Contracts, in accordance with Attachment J.5.

0425 SF 295, Summary Subcontracting Report, in accordance with Attachment J.6.

FIRST OPTION YEAR

CLIN DESCRIPTION QUAN U/I PRICE EACH TOTAL

HUB - 378 WHEC, TYPE 1, STYLE A,

0155.

1008 Sealing Ring, P/N R100-10 4 EA $ . $ .

1009 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

1010 Gasket, P/N 31/26 x 2 6 EA $ . $ .

CONTINGENCY REPLACEMENT PARTS

P/N 8344701-00-PIECE-76

1013 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

1014 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

1016 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

1017 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

1018 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

1019 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

1023 Ball 400 P/N 40D1N5401 1 EA $ . $ .

1024 Spring Plate P/N 8344717-08 1 EA $ . $ .

1027 4820-12-313-6128, Valve, Check, P/N 8344717-07 1 EA $ . $ .

1030 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

1031 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

1032 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

1033 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

1035 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

1036 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

1037 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

1038 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

1040 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

1041 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

1042 Pin, P/N 20x45DIN7 1 EA $ . $ .

1043 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

1045 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

1046 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

1047 Pin, P/N 12x25DIN7 1 EA $ . $ .

1048 Cap Nut, P/N 8344717-01 4 EA $ . $ .

1049 Threaded Pin, P/N D1N417 1 EA $ . $ .

1050 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

1051 Special Screw, P/N 8344717-03 1 EA $ . $ .

1052 Tip, P/N 8344707-01 1 EA $ . $ .

1053 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

1054 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

1055 Threaded Pin, P/N DIN417 1 EA $ . $ .

1056 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

1057 Hex Screw, P/N DIN933 8 EA $ . $ .

1058 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

1059 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

1060 Threaded Pin, P/N DIN 417 1 EA $ . $ .

1061 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

1062 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

1063 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

1064 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

1067 New Shipping Container for Hub Type 1, Style A 1 EA $ . $ .

HUB - 378 WHEC, TYPE 1, STYLE B,

0155.

1073 Sealing Ring, P/N R100-10 4 EA $ . $ .

1074 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

1075 Gasket, P/N 31/26 x 2 6 EA $ . $ .

1078 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

1079 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

1081 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

1082 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

1083 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

1084 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

1088 Ball 400 P/N 40D1N5401 1 EA $ . $ .

1089 Spring Plate P/N 8344717-08 1 EA $ . $ .

1095 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

1096 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

1097 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

1098 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

1100 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

1101 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

1102 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

1103 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

1105 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

1106 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

1107 Pin, P/N 20x45DIN7 1 EA $ . $ .

1108 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

1110 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

1111 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

1112 Pin, P/N 12x25DIN7 1 EA $ . $ .

1113 Cap Nut, P/N 8344717-01 4 EA $ . $ .

1114 Threaded Pin, P/N D1N417 1 EA $ . $ .

1115 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

1116 Special Screw, P/N 8344717-03 1 EA $ . $ .

1117 Tip, P/N 8344707-01 1 EA $ . $ .

1118 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

1119 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

1120 Threaded Pin, P/N DIN417 1 EA $ . $ .

1121 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

1122 Hex Screw, P/N DIN933 8 EA $ . $ .

1123 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

1124 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

1125 Threaded Pin, P/N DIN 417 1 EA $ . $ .

1126 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

1127 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

1128 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

1129 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

1132 New Shipping Container for Hub Type 1, Style B 1 EA $ . $ .

HUB - 270 WMEC, TYPE 3 STYLE A,

1306 5330-01-120-5229, 0-Ring, P/N OR 445-5 4 EA $ . $ .

1307 0-Ring, P/N 3-12 4 EA $ . $ .

1308 0-Ring, P/N 0R42-5 4 EA $ . $ .

1309 0-Ring, P/N 0R39-6 1 EA $ . $ .

1310 0-Ring, P/N 0R28.2-3.5 4 EA $ . $ .

1311 0-Ring, P/N 0R215-7 1 EA $ . $ .

1312 O-Ring, P/N 0R650-7 1 EA $ . $ .

1313 0-Ring, P/N 0R594-10 1 EA $ . $ .

1314 0-Ring, P/N 0R55-5 1 EA $ . $ .

1316 2010-01-335-2300, Trunnion, L.H., P/N 8350211 4 EA $ . $ .

1317 2010-01-376-4310, Crank, Disk L.H., P/N 8350205 4 EA $ . $ .

1318 2010-01-376-0134, Bushing, P/N 8377012 4 EA $ . $ .

1322 2010-01-336-6135, Cap Assy., P/N 8-350-202 1 EA $ . $ .

1323 Lock Rod, 3/16” Dia., Bronze, P/N CDA360 100 IN $ . $ .

1324 Flat Head Screw, P/N 1/2x20UNFx.5 Long 45 EA $ . $ .

1325 Hex Plug, Hollow, P/N 8HP5ON-55 4 EA $ . $ .

1326 Nut, Actuating Rod, P/N 8-349994 1 EA $ . $ .

1327 Locking Screw, P/N 8376803 1 EA $ . $ .

1328 Servo Motor Piston, P/N 8350260 1 EA $ . $ .

1329 Lock Rod, 3/16” Dia., Type 321 S/S 100 IN $ . $ .

1330 Hex Socket Set Screw, P/N 3/4 x 10 x 25mm 1 EA $ . $ .

1331 Socket Head Cap Screw, P/N M30 x 75 24 EA $ . $ .

1332 Slide Ring, P/N HS11018 1 EA $ . $ .

1333 Slide Ring, P/N HS11011 1 EA $ . $ .

1334 Actuating Rod, P/N 8 350 203 1 EA $ . $ .

1335 Locking Pin, P/N 8 376 966 6 EA $ . $ .

1336 Set Screw, P/N M8 x 12 24 EA $ . $ .

1337 2010-01-377-2280, Bushing, P/N 8 376 750 1 EA $ . $ .

1338 Propeller Hub, P/N 8 350 201 1 EA $ . $ .

1339 2010-01-376-0135, Bushing, P/N 8 350 049 1 EA $ . $ .

1340 Socket Head Cap Screw, P/N M10 x 30 8 EA $ . $ .

1341 Check Valve Assy., P/N 8 350 094 1 EA $ . $ .

1342 Hex Screw, P/N M8 x 16 16 EA $ . $ .

1343 Lock Rod, 5/16” Dia., Bronze CDA 360 52 IN $ . $ .

1344 Acorn Nut, P/N 8 377 017 4 EA $ . $ .

1345 Guide Rod, P/N 8 377 013 4 EA $ . $ .

1346 Set Screw, P/N M6 x 12 28 EA $ . $ .

1347 3120-01-376-4194, Collar Bushing, P/N 8 376 802 4 EA $ . $ .

1348 Lock Rod, 1/8” Dia., Type 321 Stainless Steel 24 IN $ . $ .

1349 Socket Head Cap Screw, P/N M27 x 60 4 EA $ . $ .

1350 Guide Flange, P/N 8 349 993 1 EA $ . $ .

1351 Hex Screw, P/N M12 x 20 8 EA $ . $ .

1352 Locking Plate, P/N 8 376 745 4 EA $ . $ .

1353 3120-01-375-9845, Collar Bushing, P/N 8 350 015 4 EA $ . $ .

1354 Pin, P/N 8376965 4 EA $ . $ .

1355 Hub Oil Tube, P/N 8350213 1 EA $ . $ .

1356 Pin, P/N, 8376968 4 EA $ . $ .

1357 Locking Plate, P/N 8376746 8 EA $ . $ .

1358 Screw Plug, P/N 8376759 1 EA $ . $ .

1359 Pipe, P/N 8376760 1 EA $ . $ .

1360 New Shipping Container for Hub Type 3, Style A 1 EA $ . $ .

HUB - 270 WMEC, TYPE 3, STYLE B,

1366 5330-01-120-5229, 0-Ring, P/N OR 445-5 4 EA $ . $ .

1367 0-Ring, P/N 3-12 4 EA $ . $ .

1368 0-Ring, P/N 0R42-5 4 EA $ . $ .

1369 0-Ring, P/N 0R39-6 1 EA $ . $ .

1370 0-Ring, P/N 0R28.2-3.5 4 EA $ . $ .

1371 0-Ring, P/N 0R215-7 1 EA $ . $ .

1372 O-Ring, P/N 0R650-7 1 EA $ . $ .

1373 0-Ring, P/N 0R594-10 1 EA $ . $ .

1374 0-Ring, P/N 0R55-5 1 EA $ . $ .

1376 2010-01-335-2300, Trunnion, R.H., P/N 8350210 4 EA $ . $ .

1377 2010-01-376-4310, Crank Ring R.H., P/N 8350204 4 EA $ . $ .

1378 2010-01-376-0134, Bushing, P/N 8377012 4 EA $ . $ .

1382 2010-01-336-6135, Cap Assy., P/N 8-350-202 1 EA $ . $ .

1383 Lock Rod, 3/16” Dia., Bronze, P/N CDA360 100 IN $ . $ .

1384 Flat Head Screw, P/N 1/2x20UNFx.5 Long 45 EA $ . $ .

1385 Hex Plug, Hollow, P/N 8HP5ON-55 4 EA $ . $ .

1386 Nut, Actuating Rod, P/N 8-349994 1 EA $ . $ .

1387 Locking Screw, P/N 8376803 1 EA $ . $ .

1388 Servo Motor Piston, P/N 8350260 1 EA $ . $ .

1389 Lock Rod, 3/16” Dia., Type 321 S/S 100 IN $ . $ .

1390 Hex Socket Set Screw, P/N 3/4 x 10 x 25mm 1 EA $ . $ .

1391 Socket Head Cap Screw, P/N M30 x 75 24 EA $ . $ .

1392 Slide Ring, P/N HS11018 1 EA $ . $ .

1393 Slide Ring, P/N HS110l1 1 EA $ . $ .

1394 Actuating Rod, P/N 8 350 203 1 EA $ . $ .

1395 Locking Pin, P/N 8 376 966 6 EA $ . $ .

1396 Set Screw, P/N M8 x 12 24 EA $ . $ .

1397 2010-01-377-2280, Bushing, P/N 8 376 750 1 EA $ . $ .

1398 Propeller Hub, P/N 8 350 201 1 EA $ . $ .

1399 2010-01-376-0135, Bushing, P/N 8 350 049 1 EA $ . $ .

1400 Socket Head Cap Screw, P/N M10 x 30 8 EA $ . $ .

1401 Check Valve Assy., P/N 8 350 094 1 EA $ . $ .

1402 Hex Screw, P/N M8 x 16 16 EA $ . $ .

1403 Lock Rod, 5/16” Dia., Bronze CDA 360 52 IN $ . $ .

1404 Acorn Nut, P/N 8 377 017 4 EA $ . $ .

1405 Guide Rod, P/N 8 377 013 4 EA $ . $ .

1406 Set Screw, P/N M6 x 12 28 EA $ . $ .

1407 3120-01-376-4194, Collar Bushing, P/N 8 376 802 4 EA $ . $ .

1408 Lock Rod, 1/8” Dia., Type 321 Stainless Steel 24 IN $ . $ .

1409 Socket Head Cap Screw, P/N M27 x 60 4 EA $ . $ .

1410 Guide Flange, P/N 8 349 993 1 EA $ . $ .

1411 Hex Screw, P/N M12 x 20 8 EA $ . $ .

1412 Locking Plate, P/N 8 376 745 4 EA $ . $ .

1413 3120-01-375-9845, Collar Bushing, P/N 8 350 015 4 EA $ . $ .

1414 Pin, P/N 8376965 4 EA $ . $ .

1415 Hub Oil Tube, P/N 8350213 1 EA $ . $ .

1416 Pin, P/N, 8376968 4 EA $ . $ .

1417 Locking Plate, P/N 8376746 8 EA $ . $ .

1418 Screw Plug, P/N 8376759 1 EA $ . $ .

1419 Pipe, P/N 8376760 1 EA $ . $ .

1420 New Shipping Container for Hub Type 3, Style B 1 EA $ . $ .

1421 Labor hours for repairs not separately priced

1422 Material for items not separately priced

1423 Contractor Report of Government Property, DHS Form 700-05, in accordance with Section H

1424 SF 294, Subcontracting Report for Individual Contracts, in accordance with Attachment J.5.

1425 SF 295, Summary Subcontracting Report, in accordance with Attachment J.6.

SECOND OPTION YEAR

CLIN DESCRIPTION QUAN U/I PRICE EACH TOTAL

HUB - 378 WHEC, TYPE 1, STYLE A,

0155.

2008 Sealing Ring, P/N R100-10 4 EA $ . $ .

2009 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

2010 Gasket, P/N 31/26 x 2 6 EA $ . $ .

CONTINGENCY REPLACEMENT PARTS

2013 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

2014 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

2016 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

2017 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

2018 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

2019 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

2023 Ball 400 P/N 40D1N5401 1 EA $ . $ .

2024 Spring Plate P/N 8344717-08 1 EA $ . $ .

2027 4820-12-313-6128, Valve, Check, P/N 8344717-07 1 EA $ . $ .

2030 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

2031 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

2032 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

2033 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

2035 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

2036 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

2037 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

2038 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

2040 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

2041 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

2042 Pin, P/N 20x45DIN7 1 EA $ . $ .

2043 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

2045 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

2046 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

2047 Pin, P/N 12x25DIN7 1 EA $ . $ .

2048 Cap Nut, P/N 8344717-01 4 EA $ . $ .

2049 Threaded Pin, P/N D1N417 1 EA $ . $ .

2050 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

2051 Special Screw, P/N 8344717-03 1 EA $ . $ .

2052 Tip, P/N 8344707-01 1 EA $ . $ .

2053 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

2054 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

2055 Threaded Pin, P/N DIN417 1 EA $ . $ .

2056 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

2057 Hex Screw, P/N DIN933 8 EA $ . $ .

2058 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

2059 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

2060 Threaded Pin, P/N DIN 417 1 EA $ . $ .

2061 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

2062 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

2063 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

2064 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

2067 New Shipping Container for Hub Type 1, Style A 1 EA $ . $ .

HUB - 378 WHEC, TYPE 1, STYLE B,

0155.

2073 Sealing Ring, P/N R100-10 4 EA $ . $ .

2074 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

2075 Gasket, P/N 31/26 x 2 6 EA $ . $ .

2078 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

2079 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

2081 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

2082 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

2083 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

2084 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

2088 Ball 400 P/N 40D1N5401 1 EA $ . $ .

2089 Spring Plate P/N 8344717-08 1 EA $ . $ .

2095 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

2096 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

2097 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

2098 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

2100 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

2101 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

2102 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

2103 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

2105 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

2106 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

2107 Pin, P/N 20x45DIN7 1 EA $ . $ .

2108 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

2110 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

2111 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

2112 Pin, P/N 12x25DIN7 1 EA $ . $ .

2113 Cap Nut, P/N 8344717-01 4 EA $ . $ .

2114 Threaded Pin, P/N D1N417 1 EA $ . $ .

2115 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

2116 Special Screw, P/N 8344717-03 1 EA $ . $ .

2117 Tip, P/N 8344707-01 1 EA $ . $ .

2118 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

2119 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

2120 Threaded Pin, P/N DIN417 1 EA $ . $ .

2121 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

2122 Hex Screw, P/N DIN933 8 EA $ . $ .

2123 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

2124 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

2125 Threaded Pin, P/N DIN 417 1 EA $ . $ .

2126 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

2127 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

2128 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

2129 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

2132 New Shipping Container for Hub Type 1, Style B 1 EA $ . $ .

HUB - 270 WMEC, TYPE 3 STYLE A,

2306 5330-01-120-5229, 0-Ring, P/N OR 445-5 4 EA $ . $ .

2307 0-Ring, P/N 3-12 4 EA $ . $ .

2308 0-Ring, P/N 0R42-5 4 EA $ . $ .

2309 0-Ring, P/N 0R39-6 1 EA $ . $ .

2310 0-Ring, P/N 0R28.2-3.5 4 EA $ . $ .

2311 0-Ring, P/N 0R215-7 1 EA $ . $ .

2312 O-Ring, P/N 0R650-7 1 EA $ . $ .

2313 0-Ring, P/N 0R594-10 1 EA $ . $ .

2314 0-Ring, P/N 0R55-5 1 EA $ . $ .

2316 2010-01-335-2300, Trunnion, L.H., P/N 8350211 4 EA $ . $ .

2317 2010-01-376-4310, Crank, Disk L.H., P/N 8350205 4 EA $ . $ .

2318 2010-01-376-0134, Bushing, P/N 8377012 4 EA $ . $ .

2322 2010-01-336-6135, Cap Assy., P/N 8-350-202 1 EA $ . $ .

2323 Lock Rod, 3/16” Dia., Bronze, P/N CDA360 100 IN $ . $ .

2324 Flat Head Screw, P/N 1/2x20UNFx.5 Long 45 EA $ . $ .

2325 Hex Plug, Hollow, P/N 8HP5ON-55 4 EA $ . $ .

2326 Nut, Actuating Rod, P/N 8-349994 1 EA $ . $ .

2327 Locking Screw, P/N 8376803 1 EA $ . $ .

2328 Servo Motor Piston, P/N 8350260 1 EA $ . $ .

2329 Lock Rod, 3/16” Dia., Type 321 S/S 100 IN $ . $ .

2330 Hex Socket Set Screw, P/N 3/4 x 10 x 25mm 1 EA $ . $ .

2331 Socket Head Cap Screw, P/N M30 x 75 24 EA $ . $ .

2332 Slide Ring, P/N HS11018 1 EA $ . $ .

2333 Slide Ring, P/N HS110l1 1 EA $ . $ .

2334 Actuating Rod, P/N 8 350 203 1 EA $ . $ .

2335 Locking Pin, P/N 8 376 966 6 EA $ . $ .

2336 Set Screw, P/N M8 x 12 24 EA $ . $ .

2337 2010-01-377-2280, Bushing, P/N 8 376 750 1 EA $ . $ .

2338 Propeller Hub, P/N 8 350 201 1 EA $ . $ .

2339 2010-01-376-0135, Bushing, P/N 8 350 049 1 EA $ . $ .

2340 Socket Head Cap Screw, P/N M10 x 30 8 EA $ . $ .

2341 Check Valve Assy., P/N 8 350 094 1 EA $ . $ .

2342 Hex Screw, P/N M8 x 16 16 EA $ . $ .

2343 Lock Rod, 5/16” Dia., Bronze CDA 360 52 IN $ . $ .

2344 Acorn Nut, P/N 8 377 017 4 EA $ . $ .

2345 Guide Rod, P/N 8 377 013 4 EA $ . $ .

2346 Set Screw, P/N M6 x 12 28 EA $ . $ .

2347 3120-01-376-4194, Collar Bushing, P/N 8 376 802 4 EA $ . $ .

2348 Lock Rod, 1/8” Dia., Type 321 Stainless Steel 24 IN $ . $ .

2349 Socket Head Cap Screw, P/N M27 x 60 4 EA $ . $ .

2350 Guide Flange, P/N 8 349 993 1 EA $ . $ .

2351 Hex Screw, P/N M12 x 20 8 EA $ . $ .

2352 Locking Plate, P/N 8 376 745 4 EA $ . $ .

2353 3120-01-375-9845, Collar Bushing, P/N 8 350 015 4 EA $ . $ .

2354 Pin, P/N 8376965 4 EA $ . $ .

2355 Hub Oil Tube, P/N 8350213 1 EA $ . $ .

2356 Pin, P/N, 8376968 4 EA $ . $ .

2357 Locking Plate, P/N 8376746 8 EA $ . $ .

2358 Screw Plug, P/N 8376759 1 EA $ . $ .

2359 Pipe, P/N 8376760 1 EA $ . $ .

2360 New Shipping Container for Hub Type 3, Style A 1 EA $ . $ .

HUB - 270 WMEC, TYPE 3, STYLE B,

2366 5330-01-120-5229, 0-Ring, P/N OR 445-5 4 EA $ . $ .

2367 0-Ring, P/N 3-12 4 EA $ . $ .

2368 0-Ring, P/N 0R42-5 4 EA $ . $ .

2369 0-Ring, P/N 0R39-6 1 EA $ . $ .

2370 0-Ring, P/N 0R28.2-3.5 4 EA $ . $ .

2371 0-Ring, P/N 0R215-7 1 EA $ . $ .

2372 O-Ring, P/N 0R650-7 1 EA $ . $ .

2373 0-Ring, P/N 0R594-10 1 EA $ . $ .

2374 0-Ring, P/N 0R55-5 1 EA $ . $ .

2376 2010-01-335-2300, Trunnion, R.H., P/N 8350210 4 EA $ . $ .

2377 2010-01-376-4310, Crank Ring R.H., P/N 8350204 4 EA $ . $ .

2378 2010-01-376-0134, Bushing, P/N 8377012 4 EA $ . $ .

2382 2010-01-336-6135, Cap Assy., P/N 8-350-202 1 EA $ . $ .

2383 Lock Rod, 3/16” Dia., Bronze, P/N CDA360 100 IN $ . $ .

2384 Flat Head Screw, P/N 1/2x20UNFx.5 Long 45 EA $ . $ .

2385 Hex Plug, Hollow, P/N 8HP5ON-55 4 EA $ . $ .

2386 Nut, Actuating Rod, P/N 8-349994 1 EA $ . $ .

2387 Locking Screw, P/N 8376803 1 EA $ . $ .

2388 Servo Motor Piston, P/N 8350260 1 EA $ . $ .

2389 Lock Rod, 3/16” Dia., Type 321 S/S 100 IN $ . $ .

2390 Hex Socket Set Screw, P/N 3/4 x 10 x 25mm 1 EA $ . $ .

2391 Socket Head Cap Screw, P/N M30 x 75 24 EA $ . $ .

2392 Slide Ring, P/N HS11018 1 EA $ . $ .

2393 Slide Ring, P/N HS110l1 1 EA $ . $ .

2394 Actuating Rod, P/N 8 350 203 1 EA $ . $ .

2395 Locking Pin, P/N 8 376 966 6 EA $ . $ .

2396 Set Screw, P/N M8 x 12 24 EA $ . $ .

2397 2010-01-377-2280, Bushing, P/N 8 376 750 1 EA $ . $ .

2398 Propeller Hub, P/N 8 350 201 1 EA $ . $ .

2399 2010-01-376-0135, Bushing, P/N 8 350 049 1 EA $ . $ .

2400 Socket Head Cap Screw, P/N M10 x 30 8 EA $ . $ .

2401 Check Valve Assy., P/N 8 350 094 1 EA $ . $ .

2402 Hex Screw, P/N M8 x 16 16 EA $ . $ .

2403 Lock Rod, 5/16” Dia., Bronze CDA 360 52 IN $ . $ .

2404 Acorn Nut, P/N 8 377 017 4 EA $ . $ .

2405 Guide Rod, P/N 8 377 013 4 EA $ . $ .

2406 Set Screw, P/N M6 x 12 28 EA $ . $ .

2407 3120-01-376-4194, Collar Bushing, P/N 8 376 802 4 EA $ . $ .

2408 Lock Rod, 1/8” Dia., Type 321 Stainless Steel 24 IN $ . $ .

2409 Socket Head Cap Screw, P/N M27 x 60 4 EA $ . $ .

2410 Guide Flange, P/N 8 349 993 1 EA $ . $ .

2411 Hex Screw, P/N M12 x 20 8 EA $ . $ .

2412 Locking Plate, P/N 8 376 745 4 EA $ . $ .

2413 3120-01-375-9845, Collar Bushing, P/N 8 350 015 4 EA $ . $ .

2414 Pin, P/N 8376965 4 EA $ . $ .

2415 Hub Oil Tube, P/N 8350213 1 EA $ . $ .

2416 Pin, P/N, 8376968 4 EA $ . $ .

2417 Locking Plate, P/N 8376746 8 EA $ . $ .

2418 Screw Plug, P/N 8376759 1 EA $ . $ .

2419 Pipe, P/N 8376760 1 EA $ . $ .

2420 New Shipping Container for Hub Type 3, Style B 1 EA $ . $ .

2421 Labor hours for repairs not separately priced

2422 Material for items not separately priced

2423 Contractor Report of Government Property, DHS Form 700-05, in accordance with Section H

2424 SF 294, Subcontracting Report for Individual Contracts, in accordance with Attachment J.5.

2425 SF 295, Summary Subcontracting Report, in accordance with Attachment J.6.

THIRD OPTION YEAR

CLIN DESCRIPTION QUAN U/I PRICE EACH TOTAL

HUB - 378 WHEC, TYPE 1, STYLE A,

0155.

3008 Sealing Ring, P/N R100-10 4 EA $ . $ .

3009 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

3010 Gasket, P/N 31/26 x 2 6 EA $ . $ .

CONTINGENCY REPLACEMENT PARTS

3013 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

3014 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

3016 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

3017 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

3018 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

3019 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

3023 Ball 400 P/N 40D1N5401 1 EA $ . $ .

3024 Spring Plate P/N 8344717-08 1 EA $ . $ .

3027 4820-12-313-6128, Valve, Check, P/N 8344717-07 1 EA $ . $ .

3030 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

3031 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

3032 Securing Ring, P/N J4O X 1.75DIN472 1 EA $ . $ .

3033 Actuating Rod, P/N 8 344 721-01 1 EA $ . $ .

3035 Socket Head Cap Screw, P/N M24x6ODIN912 8 EA $ . $ .

3036 2010-12-328-0434, Cap 1080, P/N 8 344 706-01 1 EA $ . $ .

3037 Socket Head Cap Screw, P/N M24x75DIN912 16 EA $ . $ .

3038 Spring, Lock Washer, P/N 24D1N7980 24 EA $ . $ .

3040 5365-12-328-0039, Ring, P/N 8344 718-01 1 EA $ . $ .

3041 5310-12-313-1093, Nut, P/N 8 344 717-05 1 EA $ . $ .

3042 Pin, P/N 20x45DIN7 1 EA $ . $ .

3043 Locking Screw, P/N 8 371 541-01 2 EA $ . $ .

3045 5310-01-004-2961, Special Nut, P/N 8 344 717-04 1 EA $ . $ .

3046 Stay Bolt, P/N 8344716-04 4 EA $ . $ .

3047 Pin, P/N 12x25DIN7 1 EA $ . $ .

3048 Cap Nut, P/N 8344717-01 4 EA $ . $ .

3049 Threaded Pin, P/N D1N417 1 EA $ . $ .

3050 Locking Device, P/N 8344700-00 Piece 20 1 EA $ . $ .

3051 Special Screw, P/N 8344717-03 1 EA $ . $ .

3052 Tip, P/N 8344707-01 1 EA $ . $ .

3053 Securing Washer, P/N 12.2N2660 1 EA $ . $ .

3054 Locking Screw, P/N R5/8x2ON2233 2 EA $ . $ .

3055 Threaded Pin, P/N DIN417 1 EA $ . $ .

3056 Locking Plate, P/N 8 344 719-06 4 EA $ . $ .

3057 Hex Screw, P/N DIN933 8 EA $ . $ .

3058 Hex Screw, P/N 1/2-13UNC-3Ax20 1 EA $ . $ .

3059 Locking Screw, P/N 3/4 NPTF 2 EA $ . $ .

3060 Threaded Pin, P/N DIN 417 1 EA $ . $ .

3061 5310-12-326-4441, Special Nut, P/N 8 344 720-02 1 EA $ . $ .

3062 Bush 23"DIA., P/N 8 344 714-01 1 EA $ . $ .

3063 Wire 1/8” Monel, P/N 8344700-00 Piece 23 3 FT $ . $ .

3064 Wire 1/16” Monel, P/N 8344700-00 Piece 59 2 FT $ . $ .

3067 New Shipping Container for Hub Type 1, Style A 1 EA $ . $ .

HUB - 378 WHEC, TYPE 1, STYLE B,

0155.

3073 Sealing Ring, P/N R100-10 4 EA $ . $ .

3074 Sealing Ring, P/N 8 x 3230 1 EA $ . $ .

3075 Gasket, P/N 31/26 x 2 6 EA $ . $ .

3078 5340-12-328-0234, Sliding Block, P/N 8344717-09 4 EA $ . $ .

3079 5330-12-328-0235, Ring, Piston, P/N SU 800 4 EA $ . $ .

3081 Fitting Key, P/N 10X8X30 DIN 3105 8 EA $ . $ .

3082 Strap, 705X30X120 P/N 8344718-04 4 EA $ . $ .

3083 Strap, 705X30X120 P/N 8344718-03 4 EA $ . $ .

3084 Securing Ring, P/N A70X2.5 DIN 471 16 EA $ . $ .

3088 Ball 400 P/N 40D1N5401 1 EA $ . $ .

3089 Spring Plate P/N 8344717-08 1 EA $ . $ .

3095 5330-01-228-0929, Ring, P/N 8344717-02 4 EA $ . $ .

3096 Pressure Spring, P/N 8 345 048-02 1 EA $ . $ .

3097 Securing Ring, P/N J4O X 1.75DIN472 1 EA $