Attachment 1 - Product Description_rev1.pdf

Ver: Jan 2017

Statement of Work (SOW)

Naval Special Warfare Command

Human Performance Program Replacement Equipment

1.0 OBJECTIVE:

1.1 Procure Training and Testing Equipment for NSW HPP facilities to fulfill requirement to

Test, Train and Equip NSW enterprise.

2.0 Background:

2.1 NSWG Human Performance Program’s requires various equipment to test, train and educate NSWG operators. This supports the SOCOM requirement to enhance and maintain operational performance and longevity of the SOF force. This equipment specifications will double the number of strength training in stations while including specialized strength equipment attachments to support both the Bridge Program for

Sports Medicine and required Strength and Conditioning movements. This equipment will also increase the number of operators that can be tested at once and will add needed specialized equipment for adapted training all in the same footprint as currently used.

This is important due to the limited floor space available.

3.0 DESCRIPTION OF REQUIREMENT:

3.1 Product Name: Brand Name Sorinex Gym Equipment

3.2 Description and Capabilities: Double Racks and Double Half-Racks, plate, dumbbell storage and kettlebell storage coordinate in function and use. All racks or storage with uprights must have same exact structural dimensions to accommodate adjustable Jammer arms and J-squat attachment. Due to limited floor space, free standing belt-squat machines and single use machines are not feasible. The required belt-squat capability can only be attained by removable, rack mounted belt-squat attachment.

3.3 Specifications/Salient Characteristics:

Specs: All uprights and all horizontal tubing on racks and storage must be made with minimum 11 ga steel and 3”x3”. All tubing drilled through on 4 sides on

2”spacing with 1 1/16” hole to accommodate required accessories and provide uniform appearance; not to require bolting or other fixation to the floor. Main frame assembly bolts must be at least 1” diameter for safety.

8.5 foot tall Double Half-rack package (Base Camp Uber Package)-specifications on Attachment 1

8.5 foot tall Double rack package (Base Camp Uber Package)- specifications on attachment 1

Half-rack to Half-rack connector 7’ Steel (min 11 ga) with multiple options for pull-ups, band and pulley attachments, or gear storage - specifications on attachment 1

Base Camp Jammer arms –Adjustable arms that connect to rack uprights -specifications on attachment 1

J-squat belt squat attachment for Adjustable Jammer arms with Spud Belt Squat belt - specifications on attachment 1

Safety Strap for Base Camp Series

XL Series Trigger Roller. Must attach to Base Camp rack uprights -specifications on attachment 1

XL Series Band Pegs. Must attach to Base Camp Rack

Black Urethane Bumper Plates in weights of 45lbs, 25lbs, 10 lbs. Quantities on product list - specifications on attachment 1

Urethane change weights in weights of 5lbs and 2.5lbs. Quantities on product list

8’ Outdoor Rigging Racks (XL Series). Specifications same as for all rack and storage uprights - specifications on attachment 1

Chin up bars

Dip bars

J cups

Outdoor storage system. Uprights same specifications as racks and storage listed above. - specifications on attachment 1

Must accommodate plates, kettlebells, ropes and sleds

3.4 All products must be made in USA

3.5 Quantity: Attachment 2 – Pricing Worksheet

3.6 On site installation of equipment required to be professionally installed.

4.0 Delivery Information

4.1 Required Delivery Date: 30 Aug 2020

4.2 Delivery Address:

FOR CLIN 0001:

NSWG2

1300 Helicopter Rd. BLDG 3854

Virginia Beach, VA 23459

Attn: Dallas Wood, 757-763-3230

FOR CLIN 0002:

NSWG10

1600 Seabee Dr, Bldng 3889

Virginia Beach, VA 23459

Attn: Charles Phelps, 757-763-2117

5.0 SECURITY

5.1 N/A

6.0 QUALITY ASSURANCE

6.1 The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms to include proper delivery of quantity and type of goods. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.

ATTACHMENT 1 – Additional Specifications

5x Power Rack with Custom Laser Cut Logos

- 100% made in the USA

- Depth Range 74”-75”

- Width Range 46"-48"

- Height Range 101"-102"

- 3” X 3” tubing, 11 gauge uprights drilled through in 2 directions, spaced on 2” drilled 1 1/16” hole centers

- Safety bar areas width should be between 41-43” and constructed of 3” X 3” tubing. Safety bars drilled for 1” accessory pin anchors on 2” spacing

- Base of rack is should be drilled with 1 1/16 holes on 2” centers for the entire length with feet to raise the base of the rack. Base of the rack should be raised 6” off floor for user safety and comfort.

- Anchor feet should be externally rotated at the end of each rack.

- Minimum 4 sets of bar hooks (j-hooks) be cut from plate steel with at least 1” thick plastic

HDPE material.

- All bar hooks and pins should have safety, bull nosed machined ends supported and secured through both sides of all drilled uprights for maximum strength yield.

- There should be no metal to metal contact during placement of weightlifting bar in bar hooks due to the solid, UHMU hook central core on each hook.

- All uprights need to accept storage, weight storage, stretch band, pull-up bar, and roller pads in any of 4 directions.

- For safety and durability, all assembly bolts of the main frame should be secured by at least 1” diameter bolts that can be adjustable with common hand tools.

- Plate, chain, and band storage pattern need to be able to be adjusted or changed by customer to suit various needs to any position on the rack.

- Rack must have a customizable laser cut wide rib arch support measuring 41-43” wide by 10” deep and 4” at arch throat top.

- Front and rear brace of rack should be drilled on 2” centers for accessory attachments.

- Each hole on the rack and accessories should be marked with a high machined, milled in highly visible number as to hole assignment index.

- Approximate 1 1/16” holes should be drilled on 2” centers along the entire length of overhead supports on the top, bottom, and all sides to facilitate stretch band anchor and storage pins.

- Rack needs to be band compatible in all 4 directions, overhead and 2 directions on rack base section.

- Base of rack should have top area protected from wear by a thick UHMU plastic wear guard.

- Rack needs to have ability to bolt both a Cable Colum and Lat Pull Down / Low Row Unit to rear or side uprights of Rack using existing pre-drilled holes.

- Rack should include over 17” long 1” diameter solid steel pins that are covered for storage and stretch band anchor points.

- Safety bars inside rack should have over 18 holes drilled for accessory anchor points. Safety bars should allow for multi-directional use in all upright positions in the rack. Safety bars should rotate and lock in positive position but have a built in safety deflection device to prevent contact injuries to user in the event of a missed attempt.

- All storage, dip, and locking internal pins should be welded on

- Removable, adjustable for position on rack revolving self-locking pull-up bars should have 1” solid steel rubber grip covered handles.

- 2x Roller Pads should be 4-6” X 16-18” upholstered.

- Rack should have a self-locking multi position thick pull-up bars. At least 2” diameter x 42” long.

- Rack must include 1 multi-positioning Chin Up Bar.

- Rack must have 1 landmine- multi directional torso trainer locks into any of racks

- Racks must be equipped with 1 Safety Strap Systems. Safety systems should be integrated into rack for easy one-hand adjustments and differing heights to account for specific movements and exercises. 52-56” x 3-4” straps with safety shackles and hardware bolt sets. Straps span the posts inside the rack and rated at least 10,000 lbs per strap.

- Custom Cut Logo w/Artwork and Multi-Colored Backer Plates should be made of steel and cut to order according to customer branding. Each individually laser cut layer will be ground down, free of defects, and electrostatically powder coated according to its branding designation.

- Rack must include 1 Utility Seats. Seats should be 49"L x 12"W x4"H and made of 11 gauge steel.

- Rack must include (1) 15"L x 8"W x 10"H Utility Seat / 2 Bar Storage made of 11 gauge steel.

- Rack must include minimum (10) 12" Fixed Urethane Coated American Steel Storage Pins

- Rack must include minimum (6) 12" Temporary Urethane Coated American Steel Storage

Pins

4x High Bridge - 5'

- The high bridge shall be at least 5' length, 3" width, 3" height.

- The high bridge must fit the power racks.

- High Bridge shall be able to utilize 4-Way Hole Design allowing all bars, brackets, and add-ons to be secured in any direction front to back or side to side.

- High Bridge shall be provided in a custom unit color configuration.

5x Power Rack Adjustable Jammer Arms Attachment

- The Jammer Arm should be made of 11 Gauge American Steel

- Should be at least 48” long, 3” width, 3” height and is made completely in the USA.

- Adjustable Bracket should be 11.5"L x 10.5"W x14.5" with a 14.5" Handle Width

3x Power Rack Belt Squat Attachment with Belt

- Belt squat apparatus should seamlessly attach to the existing and future racking structures.

- Needs to have automatic safety “kickstand,” with a belt included.

- This piece needs to be a hip loaded training system used in conjunction with the existing racking structure.

2x Glute Ham-Hyper

- Length Range 71-73"

- Width Range 35-37"

- Height Range 47-49"

- Minimum pad with of 18" and thickness of 3"

- Must have extra heavy duty Glute Ham pad with removable “man canyon”

- Must have pendulum style weight arm for swinging hip extension and decompression

- Must have extra wide, aluminum checker footplate.

- Must have foot pedal adjustment for easy use and adjustment

- Must have removable ball and plate holder for athlete med ball throws, twists, sit ups

- Must have plate storage built in

- Must have welded tab for upper body exercises using pendulum arm (face pulls, 1 and 2 arm rows, curls, triceps, pull thrus, presses, TKE’s, YTM’s)

- Must have built in adjustable handles on foot plate

- Must have glute ham section controlled by double parallel lever adjustment.

- Must be made from 11-gauge steel, double stitched naugahyde upholstery, TGIC powder coat -

Must have removable band pegs

- Must have wheels.

9x Adjustable Bench

- 100% Made in USA

- Adjustable to 6 positions. 0, 15, 30, 45, 60, 75 Degrees.

- Entire frame construction of 11-gauge and 7-gauge 2” square steel bent tubing and at least

70,000 PSI full-pass mig welds and rubber caps.

- Integral wheels of solid rubber, 2” diameter (minimum). Must not contact floor when in use.

- Handle at seat-end of bench for ease of transport.

- Gravity-activated angle support

- There should be no inserts or additional pads between back and seat pad.

- Bench height 17-19”.

- Pads should be made with at least 3/4” birch plywood backboard with all corners and edges rounded

- 1” thick (minimum) high-density, non-moisture absorbing, closed-cell rebound foam covered with fully-sewn uniroyal “Spirit 2” naugahyde, mounted to frame.

- Back pad 11-12” wide x 43-45” long.

- Seat pad tapered from 10” (rear) to 6” (front) for comfort.

- Bench must have ability to be stored in upright position when not in use.

- Must have Diamond Spotter Steps

2x Storage Side (4-tier height)

- Depth Range 32"-34"

- Minimum Width 3"

- 3” X 3” tubing, 11 gauge uprights drilled through in 2 directions, spaced on 2” drilled 1 1/16” hole centers

- Must be compatible with Jammer Arms for Belt Squat Attachment, Cable Columns and Lat

Pull/Low Rows

3x Kettlebell Tray

- Depth Range 11-13"

- Length Range 89-91"

- Height Range 4"-6"

- Must be compatible with Storage Unit Side (3-tier)

4x Bridge Ear

- 100% Made in USA

- Must be compatible with Cable Columns and Lat Pull/Low Rows

- Shall be able to utilize 4-Way Hole Design allowing all bars, brackets, and add-ons to be secured in any direction front to back or side to side.

2x XL Series 8' Upright

- Attach to 4 Tier Storage Upright

- Must have 250 lb weight stack

- 3” X 3” tubing, 11 gauge uprights drilled through in 2 directions, spaced on 2” drilled 1 1/16” hole centers

2x Functional Cable Column (Single Handle)

-Must be compatible to attach to 4-Tier Height Storage

-Minimum depth 33”

-Minimum width 4”

-Minimum height 101”-102”

-3/16” Nylon Coated Aircraft Cable

-adjustable attachment point

- Must have 300lb weight stack w/ band attachment points

-4 way hole design

2x Selectorized Lat Pull / Low Row Machine (Stand Alone)

-Minimum depth 51”

-Minmum width 30”

-Weight stack 400lbs w/ band attachment points

-4 way hole design

-3/16” Nylon Coated Aircraft Cable

-12 Position Modular Knurled Foot Pegs

10x Performance Bar

- Must have a weight of 20kg

- Must have a diameter of 28.5mm

- Must have Olympic & Power Lifting Ring Knurl Marks

- No center knurl

- Must have a Black Zinc Shaft Coating

- Minimum Tensile Strength of 190 PSI

- Must have Hardened Chrome Sleeve Coating

- Must have Bronze Bushings

10x Galvanized Chain Set (45 lbs)

- Weight must be minimum 45 lbs

- Must have a thickness of 5/8"

- Chain must have 4” Cordura Tube Webbing

- Must be made of steel material

2x Mighty Mitts Cannon Ball Lat Bar

- Minimum 11 Gauge American Steel

- Length Range 29-31"

- Must have 2" Diameter Bar

- Must have 3" balls at the ends of the bar which activate forearm muscles as well as grip strength.

- Must be compatible with cable machine.

2x Bent Lat Bar with Swivel (2")

- Length Range 47-49"

- Must be 2" Diameter Bar

- Must have a revolving, swivel mounted attachment point

- Steel material

5x Glute Ham Roller

-v shaped anchor points for heels/toes

-black urethane wheels with ABEC bearings

-Minimum length of 15”-16”

-Minimum width of 25”-26”

5x Bulldog Pad

-Must attach to base camp rack at any angle to be able to utilize as chest supported row bench

-Minimum Pad Length 12”

-Minimum Width 8.5”

-Minimum Thickness 2”

-Minimum Depth 27”

40x Bosco Bumper Plate (45lbs)

- Must have a weight tolerance of -.05 / +0.1%

- Must have a 17.72 in (450 mm) IWF Standard plate Diameter

- Diameter must have a +/- 1.0 mm tolerance

- Must have a 1.94 in (50mm) Width

- Must have a 4140 Polished Steel Hub

- Must be made from Ultra Urethane

- Must have minimum lifetime warranty

20x Bosco Bumper Plate (25lbs)

- Must have a weight tolerance of -.05 / +0.1%

- Must have a 17.72 in (450 mm) IWF Standard plate Diameter

- Diameter must have a +/- 1.0 mm tolerance

- Must have a 1.34 in (34mm) Width

- Must have a 4140 Polished Steel Hub

- Must be made from Ultra Urethane

- Must have minimum lifetime warranty