Fort Knox Schedule of Supplies SPE3SE25Q0164.docx

Schedule of Supplies

Item 1

1 ea CUSTOM COUNTER 1/ea Custom Counter U‐shaped, Approx. 928‐1/2" x 42" x 34" High Top ‐ 14 ga. Stainless Steel Extended Top 42" Wide

(7) ‐ 3" Knock ‐Out Cut ‐Outs For Drop Ins Provisions made to allow counter to be bolted in field Mitered Corner ‐ Turned down Standard 90°Turn Down Standard 90°Turn Down Corner Turn S/S Counter With Wood with Standard Grade Laminate‐ Front faced with 3/4" plywood covered with standard grade laminate plastic. 18 ga. stainless steel rear, ends and partitions Body width over 26" Radius Body Cut‐Out in Middle of Counter for Plate Carts as Supplied by Others Cut‐Out in End of Counter Cut‐Out in Corner of Counter

(16) Hinged Doors ‐ Metal Double Pan Mitered Body Corner Removable Front Panel Galv. Underbracing 18 Gauge Removable Undershelf Intermediate Undershelf Remov Toe Kick ‐ Stainless Steel Radius Toe Kick Lon Plate Covered Toe Kick 6" S/S Leg With Adjustable Bullet Foot Self Contained Refrigeration Systems Refrigerated Doors

(2) ‐ 2075TA‐SP3‐6Pan‐Sloped‐Temp‐est Aire® Built‐ In

(2) ‐ QSCHFP‐4 Pan‐Quick Switch‐Built‐In ‐ Custom Angled Condensate Evaporator Pan Heater Adaptor Bars Heated Base

(3) ‐ Soup Wells

(4) ‐ Self Service Curved Food Protector with Top Shelf, Angled Turn

(2) ‐ Self Service Curved Food Protector with Top Shelf LED Lights LED Lights Provisions for Counter top Equipment

(2) ‐ Load Centers Electrical Outlet Below Top in Stainless Steel Bracket with Wiring

(2) ‐ Chase With Access Panels Countertop To Ceiling & Collar Led Lights Undercounter Circuits Wired to Load Centers

(1) ‐ Access Pane1 4 ea Adande VCS1 UNDER COUNTER VCS1 Equipment Stand Refrigerated/Freezer Base, 43.3" W, single drawer, capacity: 4 x 1/1 Hotel Pans 4” deep (88 lb of food), ‐7.6°F to +59°F temperature range, Non‐load‐bearing under counter unit, automatic defrost, self‐contained side mounted refrigeration, R290 refrigerant, 2.0 amps, 120v/60/1‐ph, NEMA 5‐15P 1 ea Two Years Parts & Labor Warranty (including Seals) and 5 Year Compressor Warranty, standard 4 ea VCS1/HCT (HC) High casters, finished height 21.6 inches 1 ea Includes: (1) insulated container (per drawer)

Item 2

Custom Counter 1/ea L‐shaped, Approx. 308‐1/4" x 199‐1/2" x 42" x 34" High Top ‐ 14 ga. Stainless Steel Extended Top 42" Wide Depressed Top For Electric Griddles as Supplied by Others Provisions Made To Allow Counter Body To Be Bolted In Field Standard 90°Turn Down Standard 90°Turn Down Corner Turn Four Sided Recessed For Sheet Pans (at QS4) S/S Counter With Wood with Standard Grade Laminate‐ Front faced with 3/4" plywood covered with standard grade laminate plastic. 18

ga. stainless steel rear, ends and partitions Body width over 26" 90 Degree Angle Body Turn Counter recess for undercounter equipment as supplied by others Cut‐Out in End of Counter

(15) Hinged Doors ‐ Metal Double Pan Removable Front Panel Depressed Area for Electric Griddles as Supplied by Others Galv. Underbracing 18 Gauge Removable Undershelf Intermediate Undershelf Remove Toe Kick ‐ Stainless Steel Lon Plate Covered Toe Kick 6" S/S Leg With Adjustable Bullet Foot

(2) ‐ DI‐QS‐GHT‐28 Quick Switch Ceran ‐ Drop‐In ‐ (1) in Counter and (1) Built into Custom Food Protector 2037TA‐3Pan‐Temp‐est Aire® Built‐In QSCHFP‐4 Pan‐Quick Switch‐Built‐In Condensate Evaporator Pan Heater Adaptor Bars TW Hot Food (8 Wells With STD. CPVC Manifold Vertical Food Protector Self Service Curved Food Protector with Top Shelf over TA3 Self Service Curved Food Protector with Top Shelf over QS4 Self Service Curved Food Protector with Top Shelf over Thermawells LED Lights LED Lights Heat Lamps with Lights Self Service Food Protector with Hot/Cold Ceran Display Shelf LED Lights for Both Tiers Electrical Outlet Below Top in Stainless Steel Bracket with Wiring Chase with access panels counter top to ceiling and collar Led Lights Undercounter Load Center Circuits Wired to Load Center Silverware Cut Outs (8) Silverware Holders ‐ Stainless Steel 4 ea VCS1 UNDER COUNTER VCS1 Equipment Stand Refrigerated/Freezer Base, 43.3" W, single drawer, capacity: 4 x 1/1 Hotel Pans 4” deep (88 lb of food), ‐7.6°F to +59°F temperature range, Non‐load‐bearing under counter unit, automatic defrost, self‐contained side mounted refrigeration, R290 refrigerant, 2.0 amps, 120v/60/1‐ph, NEMA 5‐15P 1 ea Adande Two Years Parts & Labor Warranty (including Seals) and 5 Year Compressor Warranty, standard 4 ea VCS1/HCT (HC) High casters, finished height 21.6 inches 1 ea Includes: (1) insulated container (per drawer)

Item 3 Custom Counter 1/ea L‐shaped, Approx. 308" x 199‐1/2" x 42" x 34" High Top ‐ 14 ga. Stainless Steel Extended Top 42" Wide Depressed Top For Electric Griddles as Supplied by Others Provisions Made To Allow Counter Body To Be Bolted In Field Standard 90°Turn Down Standard 90°Turn Down Corner Turn Four Sided Recessed For Sheet Pans (at QS4) S/S Counter With Wood with Standard Grade Laminate‐ Front faced with 3/4" plywood covered with standard grade laminate plastic. 18

ga. stainless steel rear, ends and partitions Body width over 26" 90 Degree Angle Body Turn Counter Recess‐for undercounter equipment as supplied by others Cut‐Out in End of Counter

(15) Hinged Doors ‐ Metal Double Pan Removable Front Panel Depressed Area for Electric Griddles as Supplied by Others Galv. Underbracing 18 Gauge Removable Undershelf Intermediate Undershelf Remov Toe Kick ‐ Stainless Steel Lon Plate Covered Toe Kick 6" S/S Leg With Adjustable Bullet Foot

(2) ‐ DI‐QS‐GHT‐28 Quick Switch Ceran ‐ Drop‐In ‐ (1) in Counter and (1) Built into Custom Food Protector 2037TA‐3Pan‐Temp‐est Aire® Built‐In QSCHFP‐4 Pan‐Quick Switch‐Built‐In Adaptor Bars TW Hot Food (8 Wells) With STD. CPVC Manifold Vertical Food Protector Self Service Sloped Food Protector with Top Shelf over TA3 Self Service Sloped Food Protector with Top Shelf over QS4 Self Service Sloped Food Protector with Top Shelf over Thermawells LED Lights LED Lights Heat Lamps with Lights Self Service Food Protector with Hot/Cold Ceran Display Shelf LED Lights for Both Tiers Electrical Outlet Below Top in Stainless Steel Bracket with Wiring Chase With Access Panels Counter Top To Ceiling & Collar Led Lights Undercounter Load Center Circuits Wired to Load Center Silverware Cut Outs (8) Silverware Holders ‐ Stainless Steel

4 ea VCS1 UNDER COUNTER VCS1 Equipment Stand Refrigerated/Freezer Base, 43.3" W, single drawer, capacity: 4 x 1/1 Hotel Pans 4” deep (88 lb of food), ‐7.6°F to +59°F temperature range, Non‐load‐bearing under counter unit, automatic defrost, self‐contained side mounted refrigeration, R290 refrigerant, 2.0 amps, 120v/60/1‐ph, NEMA 5‐15P 1 ea Adande Two Years Parts & Labor Warranty (including Seals) and 5 Year Compressor Warranty, standard 4 ea VCS1/HCT (HC) High casters, finished height 21.6 inches 1 ea Includes: (1) insulated container (per drawer)

Item 4

Headcount Station 2/ea Approx. 66" x 36" x 44" High Corian Top to be 1/2" thick solid surface with 2" drop edge on all exposed edges ‐ 3/4" thick plywood subtop as required by manufacturer Extended Top 36" Wide S/S Counter With Wood with Standard Grade Laminate‐ Front faced with 3/4" plywood covered with standard grade laminate plastic.

18 ga. stainless steel rear, ends and partitions Body width over 26" Removable Front Panel Galv. Underbracing 18 Gauge Fixed Undershelf Intermediate Undershelf Remov Toe Kick ‐ Stainless Steel Lon Plate 163 Black Covered Toe Kick 6" S/S Leg With Adjustable Bullet Foot

Item 5 Dessert Counter Top ‐ 14 ga. Stainless Steel Extended Top 40" Wide Backsplash 4" High Backsplash Corner Turn Cut ‐Outs For Drop Ins Standard 90°Turn Down Standard 90°Turn Down Corner Turn S/S Counter With Wood with Standard Grade Laminate‐ Front faced with 3/4" plywood covered with standard grade laminate plastic.

18 ga. stainless steel rear, ends and partitions Body width over 26" Hinged Doors ‐ Wood with L/P Blum Hinges Self Close for Wood Doors Galv. Underbracing 18 Gauge Fixed Undershelf and Intermediate Undershelf ‐ Where Possible Remov Toe Kick ‐ Stainless Steel Lon Plate 136 Black Covered Toe Kick 6" S/S Leg With Adjustable Bullet Foot Electrical Outlet In Cabinet with Wiring

2 ea SCAS60R‐DI‐II Olympus II Drop‐In Air Screen Display Case, 60" W x 68‐1/2" H, self‐contained bottom mounted refrigeration, square top canopy with LED light, (2) adjustable stainless steel shelves with T5 LED lights, removable stainless steel deck, perforated back panel, brushed stainless steel interior ends, laminated exterior, pull‐down #23 Econo Frost night curtain, floor drain required, 1‐1/4 hp, cETLus, ETL‐Sanitation, NSF RPI Industries NOTE: Some options may change electrical requirements RPI Industries NOTE: Minimum door clearance for this unit is 26‐ 1/2" 2 ea 1 year limited warranty standard 2 ea Self‐contained refrigeration, standard 2 ea 5 year compressor warranty (for self‐contained units only) 2 ea 115/208‐230V/60/1‐ph, 12.0 amps, NEMA L14‐30P, 8 ft cord 2 ea Condensate evaporation pan 2 ea Interior end panels, mirrored stainless steel 2 ea Exterior Finish: Formica standard grade plastic laminate, must specify number & color 2 ea Stainless steel legs 2 ea #4 Stainless steel 2 ea Roll down locking security cover

Item 6 Hood 2/ea

HOOD OVERLAY

20 GA S/S OVERLAY

Item 7

Item 8

VISIONS GRAPHICS PACKAGE

Visions Design Elements Includes Delivery & Install

(8) ‐ Station Signs, 36" x 60" with hardware installed to ceiling

(10) ‐ 4 Bulb Track Lights Painting Graphic Decal ‐ 3 MM PVC w/ Digital Print Graphics ‐ 36" High @ perimeter facing the server

Installation

FIELD INSTALLATION

Installation includes technicians meeting the truck, unloading equipment, setting and leveling equipment, welding and finishing the tops, installing equipment and protectors shipped loose for field joints and field wiring. Installation does not include final plumbing and electrical connections, final clean‐up or punchlist completion.

Welded Field Joints Install Display Uprights Field Wired Circuits

Item 9

L‐shaped, Approx. 184" x 124" 2" Diameter ‐ Double horizontal Rail 2" Diameter ‐ Number of Vertical Supports Radius Corners Surface mounted flanges‐welded

Item 10

Prep Work Table Approx. 144" x 33" x 36" High Top ‐ 14 ga. Stainless Steel Std 90-Degree turndown Std 90 degree turn down miter corner turn Galv underbracing Backsplash 5" High 18 Ga fixed undershelf 1 5/8" s/s leg and gusset on Galv channel 6" s/s legs with adj feet adj s/s bullet feet 2 ea Deep Undercounter Refrigerator, 33 ‐ 38°F, side mounted self‐ contained refrigeration, SPEC Package 3 includes: stainless steel top, (3) heavy‐duty stainless steel doors, steel handles, door lock standard, (6) PVC coated adjustable wire shelves, electronic temperature control with digital temperature display, stainless steel sides & back, stainless steel interior, R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1‐ph, 4.5 amps, NEMA 5‐15P, cULus, UL EPH Classified, Made in USA 2 ea Self‐contained refrigeration standard 2 ea 7 year compressor warranty, 6 years parts warranty, 5 year labor warranty standard.

2ea stainless steel top 2 ea Castors, 5" (36" work surface height) standard Item 11

condenser, production capacity up to 475 lb/24 hours at 70°/50° (340 lb AHRI certified at 90°/70°), medium cube size, AutoAlert indicating lights, WaterSense adjustable purge control, one‐touch cleaning, harvest assist, front facing removable air filter, unit specific QR code, stainless steel finish, AgION antimicrobial protection, 115v/60/1‐ph, 13.5 amps, cULus, NSF, CE, engineered and assembled in USA 2 ea 3 year parts & labor warranties 2 ea 5 year parts & labor warranties on Evaporator 2 ea 5 year parts on compressor & condenser 2 ea Bin Top, for use with 22" cubers, flakers & nugget makers

Item 12

Griddle, Gas, Countertop 2/ea Heavy Duty Griddle, countertop, gas, 48"W x 24"D cooking surface, 1" thick polished steel griddle plate, embedded mechanical snap action thermostat every 12", millivolt pilot safety, electric spark or manual ignition, front manifold gas shut‐off valve, countertop, low profile, stainless steel front, sides, front top ledge with "Cool Bullnose", front grease trough, grease can, heavy gauge 4" back & tapered side splashes, 4" adjustable legs, 108,000 BTU, CSA, NSF 2 kt Safe‐T‐Link Gas Connector Kit, 3/4" connection, 48" hose, stainless steel braiding with extruded coating, (1) 90° elbow, ball valve, necessary hardware, with Surelink restraining cable adjustable for 3' to 5', 215,000 BTU/ hr minium flow capacity 2 ea 1 year limited parts & labor warranty, standard 2 ea Gas type to be specified 2ea 120v/50/60/1‐ph, 1.0 amp, NEMA 5‐15P, standard

Item 13

4 ea Welded Side Splash, 12"H (installed height), one side (specify side), for hand sinks with 14" wide x 10" front‐to‐back bowl, splash mounted faucets

Item 14

insulated, solid Dutch doors, top mount controls & analog thermometer, ducted heating system, thermostat 70° to 200°F temp, universal wire (17) 18" x 26" or (32) 12" x 20" x 2‐1/2" pan capacity, 1‐1/2" adjustable wire slides, 5" casters (2 with brakes), 304 stainless steel, 120v/60/1‐ph, 2000 watts, 16 amps, NEMA 5‐ 20P, cULus, NSF, ENERGY STAR® 2 ea 1 year warranty against manufacturing defects Item 15

capacity, clear Tritan™ BPA free Advance® container, 24‐1/2"H with lid open, stackable, removable compact twist lock cover, (6) touch control buttons with (34) program options, includes: Advance® blade assembly & lid, 3‐peak HP, 120v/50/60/1‐ph, 15.0 amps, NEMA 5‐15P, RoHs compliant, CE, cULus, NSF 2 ea 3 years warranty on motor base parts & 1 year warranty on labor, standard

Installation

Installation coordination to include site visit with layout drawings, coordinating installation with Food service and DPW. Remove existing equipment and set in place new griddles and make final connections. Anchor and install the traffic barrier

Coordinate onsite Provide rough in locations in CAD form. DPW required to supply power to panels and counters and water to ice makers Vendor to make final connections. All necessary floor drains are to be by DPW. Vendor to make final connection. DPW to supply the power above ceiling for the track lighting. DPW to provide new outlets for displays and headcount stations. DPW to demo elevated slabs and repair Vendor to uncrate, set in place and make final connection