CAGI Fixed Speed Datasheet 10-11 rev8.pdf
PDF 30 KB Posted
- Attached to
- Air Compressors and Dryers Federal contract opportunity
- Solicitation number
- FA9101-20-Q-0002
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 1730 Shop Air Compressor and Dryer Specification 21Jun2019-Attachment_Data-Sheet.pdf | ||
| Questions and Answers for FA9101-20-Q-0002-Service Air Procurement 4Dec2019.pdf | ||
| Questions and Answers for FA9101-20-Q-0002-Service Air Procurement 3Dec2019.pdf | ||
| Questions and Answers for FA9101-20-Q-0002.pdf | ||
| Updated SOW.pdf | ||
| Questions and Answers.pdf | ||
| 1730 Shop Air Compressor and Dryer Specification 17Oct19.pdf | ||
| FA9101-20-Q-0002 Air Compressors & Dryers - Combined Synopsis.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Date:
Air-cooled Water-cooled Type:
Oil-injected Oil-free # of Stages:
3* acfm a,e
4 Full Load Operating Pressure b psig b
5 Maximum Full Flow Operating Pressure c psig c
6 Drive Motor Nominal Rating hp
7 Drive Motor Nominal Efficiency percent
8 Fan Motor Nominal Rating (if applicable) hp
9 Fan Motor Nominal Efficiency percent
10* Total Package Input Power at Zero Flow e kW e
11 kW d
12* kW/100 cfm e
*For models that are tested in the CAGI Performance Verification Program, these items are verified by the third party administrator.
Consult CAGI websitefor a list of participants in the third party verification program: www.cagi.org
NOTES: a. Measured at the discharge terminal point of the compressor package in accordance with ISO 1217, Annex C; ACFM is actual cubic feet per minute at inlet conditions.
b. The operating pressure at which the Capacity (Item 3) and Electrical Consumption (Item 11) were measured Member for this data sheet.
c. Maximum pressure attainable at full flow, usually the unload pressure setting for load/no load control or the maximum pressure attainable before capacity control begins. May require additional power.
d. Total package input power at other than reported operating points will vary with control strategy.
e. Tolerance is specified in ISO 1217, Annex C, as shown in table below:
Specific Energy
Consumption m / min % %
Below 0.5 +/- 7 +/- 8
0.5 to 1.5 +/- 6 +/- 7
ROT 030 1.5 to 15 +/- 5 +/- 6
10/11 R8 Above 15 +/- 4 +/- 5
This form was developed by the Compressed Air and Gas Institute for the use of its members. CAGI has not independently verified the reported data.
Volume Flow Rate at specified conditions
COMPRESSOR DATA SHEET
Rotary Compressor: Fixed Speed
Manufacturer:
Model Number:
Total Package Input Power at Rated Capacity and Full Load Operating Pressure d
MODEL DATA - FOR COMPRESSED AIR
+/- 10%
Rated Capacity at Full Load Operating
Pressure a, e
15 to 50
50 to 500
Above 500
Below 15
Specific Package Input Power at Rated
Capacity and Full Load Operating Pressure e ft3 / min
Volume Flow Rate
No Load / Zero Flow
Power http://www.cagi.org/
File details come from the government source that posted it. Updated .