SPI.pdf
PDF 364 KB Posted
- Attached to
- F-16 Radar Advanced Programmable Signal Processor (APSP) Repair Federal contract opportunity
- Solicitation number
- FA8251-19-R-0006
About this file
Special Packaging Instruction
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| DD_254_(FA8251-19-R-0006)__APSP_repair.pdf | ||
| FA825119R0006.pdf | ||
| CDRLs.pdf | ||
| SQS.pdf | ||
| SECTION_L_Proposal_Instructions.pdf | ||
| SECTION_M_Evaluation_Factors_for_Award.pdf | ||
| SOW.pdf | ||
| PWS.pdf | ||
| RDL.pdf | ||
| QASP.pdf | ||
| Wage_Equivalent.pdf | ||
| Packaging.pdf | ||
| Trasportation.pdf | ||
| PWS_Update.pdf | ||
| 19R0006_PreSolicitation.pdf |
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 19 DECEMBER 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. USE ADHESIVE A-A-59692, TYPE II, TO BOND REF.-6 TO REF.-7 AND CUT OUT AS ILLUSTRATED IN DETAIL A.
2. BLUNT CORNERS OF INNER CONTAINER, REF.-5, TO PREVENT PUNCTURING OF BARRIER BAG, REF.-4.
3. PLACE BOTTOM FEET INTO CUTOUTS PROVIDED FOR IN REF.-6 & -7; ENSURE ITEM SITS FLUSH AGAINST BOTTOM.
4. USE LABEL AS SHOWN IN DETAIL C.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it.