FIRE_ALARM_128_129.pdf

U P

U P

XXXXX

X

F E

C

X X

X

14 15

J

K

L

13.1 14.1

J1

J2

J3

J4

J5

J7

K1

J6

J8

EXIST

EXIST

EXIST

K

EXIST

EXIST

13.1 14.1

EXIST

XXX

XXXX

F E

C

F E

C

F E

C

COMM RM

PRODUCTION

OFFICE

OFFICE

TOOL OFFICE

ENG. OFFICE

OFFICE

CONF. ROOM

HALL

OFFICE

OFFICE

OFFICE

OFFICE

OFFICE

U t i l i t y

C a b i n e t

U P

D N

U P

D N

FEC

F E

C

14 15

J

K

L

13.1 14.1

J1

J2

J3

J4

J5

J7

K1

J6

J8

EXIST

EXIST

EXIST

K

EXIST

EXIST

13.1 14.1

EXIST

OFFICE

OFFICE

OFFICE

COMM.

B R

Y C

E

B

I S

H O

P

SCALE: 1/8"=1'-0"

FIRE ALARM - FIRST FLOOR - AREA 128 AND 129

N

Y H

K

D A

M

K B

S

R E

P A

I R

S

T O

Y

O

F F

I C

E

C

O M

P L E

X

A I R

C R

A F

T

M

A I N

T

F

A C

B

L D

G

F I R

E

A

L A

M

S

T

N

D

F

L O

O R

FA101

PLAN NOTES

KEYED NOTES

LEGEND

SCALE: 1/8"=1'-0"

FIRE ALARM - SECOND FLOOR - AREA 128 AND 129

N

8'0 4' 16' 8'0 4' 16'

KEY PLAN

126 125 124

132 131

AISLE

AISLE

AISLE

AISLE

A I S

L E

BUILDING 238

COMPOSITE SHOP

1. INSTALL NEW DEVICES FOR THE RENOVATION AREA 128 AND 129 AS AN

EXTENSION OF THE EXISTING FIRE ALARM SYSTEM. THE NEW DEVICES

SHALL BE INSTALLED IN ACCORDANCE WITH NFPA 72, UFC 3-600-01,

AND THE HILL AFB FACILITY DESIGN STANDARD. THE EXISTING FACP IS

FCI SERIES 7200 LOCATED ON THE WEST END OF THE BUILDING. THE

LOCATION OF THE EXISTING FACP IS SHOWN IN THE KEY PLAN.

2. PROVIDE NEW HORN/STROBE DEVICES THROUGHOUT FIRST AND

SECOND FLOOR AT AREA 128 AND 129 IN ACCORDANCE WITH NFPA 72

UFC 3-600-01, AND THE HILL AFB FACILITY DESIGN STANDARD.

3. NEW DEVICES SHALL BE CONNECTED TO THE EXISTING FIRE ALARM

SYSTEM AS CLASS B CIRCUIT IN ACCORDANCE WITH NFPA 72.

4. THE EXISTING FIRE ALARM SYSTEM SHALL NOT BE IMPACTED AND

REMAIN FULLY OPERATIONAL DURING THE RENOVATION.

5. CONTRACTOR SHALL PROVIDE FINAL SYSTEM LAYOUT DRAWINGS

INCLUDING BATTERY CALCULATIONS AND VOLTAGE DROP

CALCULATIONS AND OBTAIN APPROVAL OF ALL AUTHORITIES HAVING

JURISDICTION.

6. IT IS THE INTENT OF THESE DOCUMENTS TO PROVIDE DESIGN,

MATERIALS, AND EQUIPMENT FOR A TOTALLY FUNCTIONING AND

OPERATING FIRE ALARM SYSTEMS, INCLUDING THE PROPER

INTERFACING AND COORDINATION WITH ALL OTHER BUILDING

SYSTEMS.

7. THE GENERAL CHARACTER AND SCOPE OF THE WORK IS ILLUSTRATED

IN THE SPECIFICATIONS AND THE DRAWINGS. THE SPECIFICATIONS

AND DRAWINGS ARE DIVIDED INTO SEVERAL SECTIONS FOR

CONVENIENCE ONLY AND ALL OF THE CONTRACT DOCUMENTS MUST

BE CONSIDERED AS A WHOLE. THE CONTRACTOR SHALL BE

RESPONSIBLE FOR THE COORDINATION OF ALL TRADES,

SUBCONTRACTORS, AND VENDORS ENGAGED IN WORK.

8. THESE DRAWINGS DEPICT GENERAL LOCATIONS OF FIRE ALARM

SYSTEM EQUIPMENT AND FIELD DEVICES. FINAL LOCATIONS,

QUANTITIES, APPLIANCE RATINGS, ETC. SHALL BE PROVIDED BY THE

INSTALLING CONTRACTOR IN ACCORDANCE WITH THE APPLICABLE

CODES, STANDARDS, AND CONTRACT DOCUMENTS.

9. THE CONTRACTOR SHALL OBTAIN ALL REQUIRED PERMITS AND

APPROVALS AS REQUIRED BY THE AUTHORITY HAVING JURISDICTION.

THE CONTRACTOR SHALL PAY FOR AND SECURE ALL PERMITS AND

FEES FOR FIRE ALARM SYSTEM WORK.

10. COORDINATE FINAL SYSTEM TESTING WITH OTHER CONTRACTORS TO

PROVIDE FULL SYSTEM OPERATION AT TIME OF TESTING.

11. FIRE ALARM CONTRACTOR SHALL BE RESPONSIBLE FOR SCHEDULING

AND PERFORMING ALL INSPECTIONS AND TESTS AS REQUIRED BY THE

CONTRACTING OFFICER OR THE AUTHORITY HAVING JURISDICTION.

12. ALL FLOOR AND WALL CONDUIT PENETRATION SHALL BE SLEEVED AND

SEALED.

13. ALL WIRING SHALL BE INSTALLED IN CONDUIT. CONDUIT SIZE AND

PERCENTAGE OF FILL SHALL BE DETERMINED BY THE INSTALLING

CONTRACTOR AND SHALL COMPLY WITH THE APPLICABLE STANDARDS

AND SYSTEM MANUFACTURER'S REQUIREMENTS.

14. FIRE ALARM WIRING SHALL NOT BE INSTALLED IN THE SAME CONDUITS

OR JUNCTION BOXES AS LIGHTNING, POWER, OR OTHER WIRING. ALL

JUNCTION BOXES SHALL BE PAINTED RED AND LABELED "FIRE ALARM".

15. PULL ALL CONDUCTORS SPLICE FREE. THE USE OF WIRE NUTS,

CRIMPED CONNECTORS, OR TWISTING OF CONDUCTORS IS

PROHIBITED.

16. ALL ADDRESSABLE CONTROL MODULES AND MONITOR MODULES

SHALL BE LOCATED WITHIN 3 FEET OF THE DEVICES BEING

MONITORED.

17. COORDINATE DUCT SMOKE DETECTION WITH MECHANICAL DESIGN

CONTRACTORS. ALL DUCT SMOKE DETECTOR REMOTE LAMPS AND

TEST STATION SHALL BE ACCESSIBLE, VISIBLE, AND PERMANENTLY

LABELED.

HORN/STROBE CEILING MOUNTED

HORN DEVICE CEILING MOUNTED

1. PROVIDE CONTROL MODULE AND DUCT SMOKE DETECTOR FOR

SHUTDOWN OF RTU-1. PROVIDE REMOTE LAMPS AND TEST STATION

AT AN ACCESSIBLE LOCATION. COORDINATE WITH MECHANICAL

CONTRACTOR.

2. PROVIDE CONTROL MODULE AND DUCT SMOKE DETECTOR FOR

SHUTDOWN OF RTU-2. PROVIDE REMOTE LAMPS AND TEST STATION

AT AN ACCESSIBLE LOCATION. COORDINATE WITH MECHANICAL

CONTRACTOR.

EXISTING FACP

DUCT SMOKE DETECTOR

CONTROL MODULE