FA810622R0003_______0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE Page 1

2. AMENDMENT/MODIFICATION NO.

FA8106-22-R-0003-0001

3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO (If applicable)

FA810622R0003

6. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFLCMC WLK

3001 STAFF DR STE 1AG1 104A

TINKER AFB OK 73145-3303

BUYER: Qian Gao/AFLCMC/WLK qian.gao.1@us.af.mil Phone: (405) 734- 8373

7. ADMINISTERED BY (If other than item 6) CODEFA8106

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA810622R0003

9B. DATED (SEE ITEM 11)

22-MAR-2022

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified. 3-MAY-2022 4:00 PM

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

FA8106-22-R-0003-0001

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this amendment is to extend the due date for proposals and make administrative changes to documents as stated below.

FIRST: The due date for the proposal submission is extended as follows:

FROM: 22Apr2022 4:00PM CST TO: 3 May 2022 4:00PM CST

SECOND: FAR Clause 252.227-015, FAR Clause 252.227-017 and FAR Clause 252.227-037 has been added in full text. The Contractor shall provide a listed of data which government reserves unlimited rights to.

THIRD: The apparent awardee must utilize Tyonek as a subcontractor.

FOURTH: All other terms and conditions remain unchanged and in full force and effect.

CONTRACT CLAUSES

252.227-7015 TECHNICAL DATA--COMMERCIAL ITEMS (FEB 2014)

(IAW DFARS 227.7102-4(a)(1))

(a) Definitions. As used in this clause--

(1) "Commercial item" does not include computer software.

(2) “Covered Government support contractor” means a contractor (other than a litigation support contractor covered by 252.204-7014) under a contract, the primary purpose of which is to furnish independent and impartial advice or technical assistance directly to the Government in support of the Government’s management and oversight of a program or effort (rather than to directly furnish an end item or service to accomplish a program or effort), provided that the contractor—

(i) Is not affiliated with the prime contractor or a first-tier subcontractor on the program or effort, or with any direct competitor of such prime contractor or any such first-tier subcontractor in furnishing end items or services of the type developed or produced on the program or effort; and

(ii) Receives access to technical data or computer software for performance of a Government contract that contains the clause at 252.227-7025, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends.

(3) "Form, fit, and function data" means technical data that describes the required overall physical, functional, and performance characteristics (along with the qualification requirements, if applicable) of an item, component, or process to the extent necessary to permit identification of physically and functionally interchangeable items.

(4) The term "item" includes components or processes.

(5) "Technical data" means recorded information, regardless of the form or method of recording, of a scientific or technical nature (including computer software documentation). The term does not include computer software or data incidental to contract administration, such as financial and/or management information.

(b) License.

(1) The Government shall have the unrestricted right to use, modify, reproduce, release, perform, display, or disclose technical data, and to permit others to do so, that—

(i) Have been provided to the Government or others without restrictions on use, modification, reproduction, release, or further disclosure other than a release or disclosure resulting from the sale, transfer, or other assignment of interest in the technical data to another party or the sale or transfer of some or all of a business entity or its assets to another party;

(ii) Are form, fit, and function data;

(iii) Are a correction or change to technical data furnished to the Contractor by the Government;

(iv) Are necessary for operation, maintenance, installation, or training (other than detailed manufacturing or process data); or

(v) Have been provided to the Government under a prior contract or licensing agreement through which the Government has acquired the rights to use, modify, reproduce, release, perform, display, or disclose the data without restrictions.

(2) Except as provided in paragraph (b)(1) of this clause, the Government may use, modify, reproduce, release, perform, display, or disclose technical data within the government only. The Government shall not—

(i) Use the technical data to manufacture additional quantities of the commercial items; or

(ii) Release, perform, display, disclose, or authorize use of the technical data outside the Government without the Contractor's written permission unless a release, disclosure or permitted use is necessary for emergency repair or overhaul of the commercial items furnished under this contract, or for performance of work by covered Government support contractors.

(3) The Contractor acknowledges that—

(i) Technical data covered by paragraph (b)(2) of this clause is authorized to be released or disclosed to covered Government support contractors:

(ii) The Contractor will be notified of such release or disclosure;

(iii) The Contractor (or the party asserting restrictions as identified in a restrictive legend) may require each such covered Government support contractor to enter into a non-disclosure agreement directly with the Contractor (or the party asserting restrictions) regarding the covered Government support contractor’s use of such data, or alternatively, that the Contractor (or party asserting restrictions) may waive in writing the requirement for a non-disclosure agreement; and

(iv) Any such non-disclosure agreement shall address the restrictions on the covered Government support contractor’s use of the data as set forth in the clause at 252.227-7025, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends. The non-disclosure agreement shall not include any additional terms and conditions unless mutually agreed to by the parties to the non-disclosure agreement.

(c) Additional license rights. The Contractor, its subcontractors, and suppliers are not required to provide the Government additional rights to use, modify, reproduce, release, perform, display, or disclose technical data. However, if the Government desires to obtain additional rights in technical data, the Contractor agrees to promptly enter into negotiations with the Contracting Officer to determine whether there are acceptable terms for transferring such rights. All technical data in which the Contractor has granted the Government additional rights shall be listed or described in a special license agreement made part of this contract. The license shall enumerate the additional rights granted the Government in such data.

(d) Release from liability. The Contractor agrees that the Government, and other persons to whom the Government may have released or disclosed technical data delivered or otherwise furnished under this contract, shall have no liability for any release or disclosure of technical data that are not marked to indicate that such data are licensed data subject to use, modification, reproduction, release, performance, display, or disclosure restrictions.

(e) Applicability to subcontractors or suppliers.

(1) The Contractor shall recognize and protect the rights afforded its subcontractors and suppliers under 10 U.S.C.

2320 and 10 U.S.C. 2321.

(2) Whenever any technical data related to commercial items developed in any part at private expense will be obtained from a subcontractor or supplier for delivery to the Government under this contract, the Contractor shall use this same clause in the subcontract or other contractual instrument, including subcontracts and other contractual instruments for commercial items, and require its subcontractors or suppliers to do so, without alteration, except to identify the parties. This clause will govern the technical data pertaining to any portion of a commercial item that was developed exclusively at private expense, and the clause at 252.227-7013 will govern the technical data pertaining to any portion of a commercial item that was developed in any part at Government expense.

252.227-7037 VALIDATION OF RESTRICTIVE MARKINGS ON TECHNICAL DATA (SEP 2016)

(IAW DFARS 227.7102-4(c), DFARS 227.7103-6(e)(3), DFARS 227.7104(e)(5), DFARS

227.7203-6(f))

(a) Definitions. The terms used in this clause are defined in the Rights in Technical Data--Noncommercial Items clause of this contract.

(b) Presumption regarding development exclusively at private expense.

(1) Commercial items.

(i) Except as provided in paragraph (b)(2) of this clause, the Contracting Officer will presume that the Contractor's or a subcontractor's asserted use or release restrictions with respect to a commercial item is justified on the basis that the item was developed exclusively at private expense.

(ii) The Contracting Officer will not challenge such assertions unless the Contracting Officer has information that demonstrates that the commercial item was not developed exclusively at private expense.

(2) Major weapon systems. In the case of a challenge to a use or release restriction that is asserted with respect to data of the Contractor or a subcontractor for a major weapon system or a subsystem or component thereof on the basis that the major weapon system, subsystem, or component was developed exclusively at private expense--

(i) The presumption in paragraph (b)(1) of this clause applies to--

(A) A commercial subsystem or component of a major weapon system, if the major weapon system was acquired as a commercial item in accordance with DFARS subpart 234.70 (10 U.S.C.

2379(a));

(B) A component of a subsystem, if the subsystem was acquired as a commercial item in accordance with DFARS subpart 234.70 (10 U.S.C. 2379(b)); and

(C) Any other component, if the component is a commercially available off-the-shelf item or a commercially available off-the-shelf item with modifications of a type customarily available in the commercial marketplace or minor modifications made to meet Federal Government requirements; and

(ii) In all other cases, the challenge to the use or release restriction will be sustained unless information provided by the Contractor or a subcontractor demonstrates that the item or process was developed exclusively at private expense.

(c) Justification. The Contractor or subcontractor at any tier is responsible for maintaining records sufficient to justify the validity of its markings that impose restrictions on the Government and others to use, duplicate, or disclose technical data delivered or required to be delivered under the contract or subcontract. Except as provided in paragraph (b)(1) of this clause, the Contractor or subcontractor shall be prepared to furnish to the Contracting Officer a written justification for such restrictive markings in response to a challenge under paragraph (e) of this clause.

(d) Prechallenge request for information.

(1) The Contracting Officer may request the Contractor or subcontractor to furnish a written explanation for any restriction asserted by the Contractor or subcontractor on the right of the United States or others to use technical data. If, upon review of the explanation submitted, the Contracting Officer remains unable to ascertain the basis of the restrictive marking, the Contracting Officer may further request the Contractor or subcontractor to furnish additional information in the records of, or otherwise in the possession of or reasonably available to, the Contractor or subcontractor to justify the validity of any restrictive marking on technical data delivered or to be delivered under the contract or subcontract (e.g., a statement of facts accompanied with supporting documentation). The Contractor or subcontractor shall submit such written data as requested by the Contracting Officer within the time required or such longer period as may be mutually agreed.

(2) If the Contracting Officer, after reviewing the written data furnished pursuant to paragraph (d)(1) of this clause, or any other available information pertaining to the validity of a restrictive marking, determines that reasonable grounds exist to question the current validity of the marking and that continued adherence to the marking would make impracticable the subsequent competitive acquisition of the item, component, or process to which the technical data relates, the Contracting Officer shall follow the procedures in paragraph (e) of this clause.

(3) If the Contractor or subcontractor fails to respond to the Contracting Officer's request for information under paragraph (d)(1) of this clause, and the Contracting Officer determines that continued adherence to the marking would make impracticable the subsequent competitive acquisition of the item, component, or process to which the technical data relates, the Contracting Officer may challenge the validity of the marking as described in paragraph (e) of this clause.

(e) Challenge.

(1) Notwithstanding any provision of this contract concerning inspection and acceptance, if the Contracting Officer determines that a challenge to the restrictive marking is warranted, the Contracting Officer shall send a written challenge notice to the Contractor or subcontractor asserting the restrictive markings. Such challenge shall—

(i) State the specific grounds for challenging the asserted restriction;

(ii)Require a response within sixty (60) days justifying and providing sufficient evidence as to the current validity of the asserted restriction;

(iii) State that a DoD Contracting Officer's final decision, issued pursuant to paragraph (g) of this clause, sustaining the validity of a restrictive marking identical to the asserted restriction, within the three-year period preceding the challenge, shall serve as justification for the asserted restriction if the validated restriction was asserted by the same Contractor or subcontractor (or any licensee of such Contractor or subcontractor) to which such notice is being provided; and

(iv) State that failure to respond to the challenge notice may result in issuance of a final decision pursuant to paragraph (f) of this clause.

(2) The Contracting Officer shall extend the time for response as appropriate if the Contractor or subcontractor submits a written request showing the need for additional time to prepare a response.

(3) The Contractor's or subcontractor's written response shall be considered a claim within the meaning of 41 U.S.C.

7101, Contract Disputes and shall be certified in the form prescribed by FAR 33.207 of the Federal Acquisition Regulation, regardless of dollar amount.

(4) A Contractor or subcontractor receiving challenges to the same restrictive markings from more than one Contracting Officer shall notify each Contracting Officer of the existence of more than one challenge. The notice shall also state which Contracting Officer initiated the first in time unanswered challenge. The Contracting Officer initiating the first in time unanswered challenge after consultation with the Contractor or subcontractor and the other Contracting Officers, shall formulate and distribute a schedule for responding to each of the challenge notices to all interested parties. The schedule shall afford the Contractor or subcontractor an opportunity to respond to each challenge notice. All parties will be bound by this schedule.

(f) Final decision when Contractor or subcontractor fails to respond. Upon a failure of a Contractor or subcontractor to submit any response to the challenge notice the Contracting Officer will issue a final decision to the Contractor or subcontractor in accordance with paragraph (b) of this clause and the Disputes clause of this contract pertaining to the validity of the asserted restriction. This final decision shall be issued as soon as possible after the expiration of the time period of paragraph (e)(1)(ii) or (e)(2) of this clause. Following issuance of the final decision, the Contracting Officer will comply with the procedures in (g)(2)(ii) through (iv) of this clause.

(g) Final decision when Contractor or subcontractor responds.

(1) If the Contracting Officer determines that the Contractor or subcontractor has justified the validity of the restrictive marking, the Contracting Officer shall issue a final decision to the Contractor or subcontractor sustaining the validity of the restrictive marking, and stating that the Government will continue to be bound by the restrictive marking. This final decision shall be issued within sixty (60) days after receipt of the Contractor's or subcontractor's response to the challenge notice, or within such longer period that the Contracting Officer has notified the Contractor or subcontractor that the Government will require. The notification of a longer period for issuance of a final decision will be made within sixty (60) days after receipt of the response to the challenge notice.

(2) (i) If the Contracting Officer determines that the validity of the restrictive marking is not justified, the Contracting

Officer shall issue a final decision to the Contractor or subcontractor in accordance with the Disputes clause of this contract. Notwithstanding paragraph (e) of the Disputes clause, the final decision shall be issued within sixty (60) days after receipt of the Contractor's or subcontractor's response to the challenge notice, or within such longer period that the Contracting Officer has notified the Contractor or subcontractor of the longer period that the Government will require. The notification of a longer period for issuance of a final decision will be made within sixty (60) days after receipt of the response to the challenge notice.

(ii) The Government agrees that it will continue to be bound by the restrictive marking for a period of ninety

(90) days from the issuance of the Contracting Officer's final decision under paragraph (g)(2)(i) of this clause. The Contractor or subcontractor agrees that, if it intends to file suit in the United States Claims Court it will provide a notice of intent to file suit to the Contracting Officer within ninety (90) days from the issuance of the Contracting Officer's final decision under paragraph (g)(2)(i) of this clause. If the Contractor or subcontractor fails to appeal, file suit, or provide a notice of intent to file suit to the Contracting Officer within the ninety (90)-day period, the Government may cancel or ignore the restrictive markings, and the failure of the Contractor or subcontractor to take the required action constitutes agreement with such Government action.

(iii) The Government agrees that it will continue to be bound by the restrictive marking where a notice of intent to file suit in the United States Claims Court is provided to the Contracting Officer within ninety (90) days from the issuance of the final decision under paragraph (g)(2)(i) of this clause. The Government will no longer be bound, and the Contractor or subcontractor agrees that the Government may strike or ignore the restrictive markings, if the Contractor or subcontractor fails to file its suit within one (1) year after issuance of the final decision. Notwithstanding the foregoing, where the head of an agency determines, on a nondelegable basis, that urgent or compelling circumstances will not permit waiting for the filing of a suit in the United States Claims Court, the Contractor or subcontractor agrees that the agency may, following notice to the Contractor or subcontractor, authorize release or disclosure of the technical data. Such agency determination may be made at any time after issuance of the final decision and will not affect the Contractor's or subcontractor's right to damages against the United States where its restrictive markings are ultimately upheld or to pursue other relief, if any, as may be provided by law.

(iv) The Government agrees that it will be bound by the restrictive marking where an appeal or suit is filed pursuant to the Contract Disputes statute until final disposition by an agency Board of Contract Appeals or the United States Claims Court. Notwithstanding the foregoing, where the head of an agency determines, on a nondelegable basis, following notice to the Contractor that urgent or compelling circumstances will not permit awaiting the decision by such Board of Contract Appeals or the United States Claims Court, the Contractor or subcontractor agrees that the agency may authorize release or disclosure of the technical data. Such agency determination may be made at any time after issuance of the final decision and will not affect the Contractor's or subcontractor's right to damages against the United States where its restrictive markings are ultimately upheld or to pursue other relief, if any, as may be provided by law.

(h) Final disposition of appeal or suit.

(1) If the Contractor or subcontractor appeals or files suit and if, upon final disposition of the appeal or suit, the Contracting Officer's decision is sustained—

(i) The restrictive marking on the technical data shall be cancelled, corrected or ignored; and

(ii) If the restrictive marking is found not to be substantially justified, the Contractor or subcontractor, as appropriate, shall be liable to the Government for payment of the cost to the Government of reviewing the restrictive marking and the fees and other expenses (as defined in 28 U.S.C. 2412(d)(2)(A)) incurred by the Government in challenging the marking, unless special circumstances would make such payment unjust.

(2) If the Contractor or subcontractor appeals or files suit and if, upon final disposition of the appeal or suit, the Contracting Officer's decision is not sustained—

(i) The Government shall continue to be bound by the restrictive marking; and

(ii)The Government shall be liable to the Contractor or subcontractor for payment of fees and other expenses (as defined in 28 U.S.C. 2412(d)(2)(A)) incurred by the Contractor or subcontractor in defending the marking, if the challenge by the Government is found not to have been made in good faith.

(i) Duration of right to challenge. The Government may review the validity of any restriction on technical data, delivered or to be delivered under a contract, asserted by the Contractor or subcontractor. During the period within three (3) years of final payment on a contract or within three (3) years of delivery of the technical data to the Government, whichever is later, the Contracting Officer may review and make a written determination to challenge the restriction. The Government may, however, challenge a restriction on the release, disclosure or use of technical data at any time if such technical data—

(1) Is publicly available;

(2) Has been furnished to the United States without restriction; or

(3) Has been otherwise made available without restriction. Only the Contracting Officer's final decision resolving a formal challenge by sustaining the validity of a restrictive marking constitutes "validation" as addressed in 10 U.S.C.

2321.

(j) Decision not to challenge. A decision by the Government, or a determination by the Contracting Officer, to not challenge the restrictive marking or asserted restriction shall not constitute "validation".

(k) Privity of contract. The Contractor or subcontractor agrees that the Contracting Officer may transact matters under this clause directly with subcontractors at any tier that assert restrictive markings. However, this clause neither creates nor implies privity of contract between the Government and subcontractors.

(l) Flowdown. The Contractor or subcontractor agrees to insert this clause in contractual instruments, including subcontracts and other contractual instruments for commercial items, with its subcontractors or suppliers at any tier requiring the delivery of technical data.

ADDENDUM TO PROVISION 52.212-1

252.227-7017 IDENTIFICATION AND ASSERTION OF USE, RELEASE, OR DISCLOSURE

RESTRICTIONS (JAN 2011)

(IAW DFARS 227.7103-3(b), DFARS 227.7104(e)(2), DFARS 227.7203-3(a))

(a) The terms used in this provision are defined in following clause or clauses contained in this solicitation—

(1) If a successful offeror will be required to deliver technical data, the Rights in Technical Data--Noncommercial Items clause, or, if this solicitation contemplates a contract under the Small Business Innovation Research Program, the Rights in Noncommercial Technical Data and Computer Software--Small Business Innovation Research (SBIR) Program clause.

(2) If a successful offeror will not be required to deliver technical data, the Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation clause, or, if this solicitation contemplates a contract under the Small Business Innovation Research Program, the Rights in Noncommercial Technical Data and Computer Software--Small Business Innovation Research (SBIR) Program clause.

(b) The identification and assertion requirements in this provision apply only to technical data, including computer software documentation, or computer software to be delivered with other than unlimited rights. For contracts to be awarded under the Small Business Innovation Research Program, the notification and identification requirements do not apply to technical data or computer software that will be generated under the resulting contract. Notification and identification is not required for restrictions based solely on copyright.

(c) Offers submitted in response to this solicitation shall identify, to the extent known at the time an offer is submitted to the Government, the technical data or computer software that the Offeror, its subcontractors or suppliers, or potential subcontractors or suppliers, assert should be furnished to the Government with restrictions on use, release, or disclosure.

(d) The Offeror's assertions, including the assertions of its subcontractors or suppliers or potential subcontractors or suppliers shall be submitted as an attachment to its offer in the following format, dated and signed by an official authorized to contractually obligate the Offeror:

Identification and Assertion of Restrictions on the Government's Use, Release, or Disclosure of Technical Data or Computer Software.

The Offeror asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data or computer software should be restricted:

Technical Data or Computer Software to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of Person Asserting Restrictions****

(LIST)***** (LIST) (LIST) (LIST)

*For technical data (other than computer software documentation) pertaining to items, components, or processes developed at private expense, identify both the deliverable technical data and each such items, component, or process. For computer software or computer software documentation identify the software or documentation.

**Generally, development at private expense, either exclusively or partially, is the only basis for asserting restrictions. For technical data, other than computer software documentation, development refers to development of the item, component, or process to which the data pertain. The Government's rights in computer software documentation generally may not be restricted. For computer software, development refers to the software. Indicate whether development was accomplished exclusively or partially at private expense. If development was not accomplished at private expense, or for computer software documentation, enter the specific basis for asserting restrictions.

***Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR data generated under another contract, limited, restricted, or government purpose rights under this or a prior contract, or specially negotiated licenses).

****Corporation, individual, or other person, as appropriate.

*****Enter "none" when all data or software will be submitted without restrictions.

Date ____________________________ Printed Name and Title ____________________________

Signature ____________________________

(End of identification and assertion)

(e) An offeror's failure to submit, complete, or sign the notification and identification required by paragraph (d) of this provision with its offer may render the offer ineligible for award.

(f) If the Offeror is awarded a contract, the assertions identified in paragraph (d) of this provision shall be listed in an attachment to that contract. Upon request by the Contracting Officer, the Offeror shall provide sufficient information to enable the Contracting Officer to evaluate any listed assertion.