Synopsis_20-30026.docx

(1) Action Code:

N/A.

(2) Date:

21 August

(3) Year:

(4) Contracting Office Zip Code:

73145

(5) Product or Service Code:

J015 – Maintenance-Repair Aircraft

(6) Contracting Office Address:

DEPARTMENT OF THE AIR FORCE (DAF)

BLDG 3001 SUITE 2AJ81A

TINKER AFB, OK. 73145

(7) Subject:

T-1A Systems Engineering Program Management (SEPM)

(8) Proposed Solicitation Number:

FA8106-19-R-0004

(9) Closing Response Date:

Anticipated solicitation issue date: 5 September 2019 Anticipated solicitation closing date: 4 December 2019

(10) Contact Point or Contracting Officer:

Gayle Little Contracting Officer

(405) 736-7124 Gayle.Little@us.af.mil

Stephanie Tinnin Contracting Officer (405)736-4219 Stephanie.Tinnin.1@us.af.mil

(11) Contract Award and Solicitation Number:

N/A.

(12) Contract Award Dollar Amount:

N/A.

(13) Contract Line Item Numbers:

Proposed Line Items

X001 Management (Program, Product, Engineering) – CPFF LOE X002 Management Fee – CPFF Fee X003 Engineering and Technical Support – CPFF LOE X004 Engineering and Technical Support Fee – CPFF Fee X005 Commercial Engineering – CR X006 Non-recurring Engineering – FFP X007 Systems Engineering – FFP X008 Over & Above Maintenance and Repair Support & Inspections – FFP X009 Data – NSP X010 Travel – CR X011 Non-recurring Engineering/Maintenance and Repair Support & Inspections – FFP LOE X012 Non-recurring Engineering/Maintenance and Repair Support & Inspections – FPIF X013 Non-recurring Engineering/Maintenance and Repair Support & Inspections – CPIF X014 Non-recurring Engineering/Maintenance and Repair Support & Inspections – CPFF X015 Non-recurring Engineering/Maintenance and Repair Support & Inspections – CPFF LOE

(14) Contract Award Date:

N/A.

(15) Contractor:

There is one approved source for this engineering service effort; Textron Aviation Defense

(16) Description:

(a) National Stock Number (NSN) if assigned:

N/A

(b) Specification and whether an offeror, its product, or service must meet a qualification requirement in order to be eligible for award, and identification of the office from which additional information about the qualification requirement may be obtained (see Subpart 9.2).

N/A.

(c) Manufacturer, including part number, drawing number, etc:

The original equipment manufacturer is Textron Aviation Defense

(d) Size, dimensions, or other form, fit or functional description:

N/A

(e) Predominant material of manufacture:

N/A

(f) Quantity, including any options for additional quantities:

To be determined.

(g) Unit of issue:

To be provided in solicitation.

(h) Destination information:

FOB: Origin

(i) Delivery schedule:

To be provided in solicitation.

(j) Duration of the contract period.

The period of performance (PoP) will begin on the day of contract award for a four year basic period and three, two year options for a total of 10 years if all options are exercised.

(k) Sustainable acquisition requirements (or a description of high-performance sustainable building practices required, if for design, construction, renovation, repair, or deconstruction) (see parts 23 or 36).

N/A.

(l) For a proposed contract action in an amount estimated to be greater than $25,000 but not greater than the simplified acquisition threshold, enter—

i. A description of the procedures to be used in awarding the contract (e.g., request for oral or written quotation or solicitation), and

N/A

ii. The anticipated award date.

N/A

(m) For Architect-Engineer projects and other projects for which the product or service codes are insufficient, provide brief details with respect to: location, scope of services required, cost range and limitations, type of contract, estimated starting and completion dates, and any significant evaluation factors.

N/A.

(n) In the case of noncompetitive contract actions (including those that do not exceed the simplified acquisition threshold), identify the intended source and insert a statement of the reason justifying the lack of competition.

i. Textron Aviation Defense 201 S Greenwich Wichita, KS 67207-1402

CAGE: 6CFY2

(o)

i. Except when using the sole source authority at 6.302-1, insert a statement that all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency.

The authority at FAR 6.302-1(a)(2)(iii), only one responsible source and no other supplies or services will satisfy agency requirements, will be utilized.

ii. When using the sole source authority at 6.302-1, insert a statement that all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

There is one approved sources for this repair effort; Textron Aviation Defense. Due to the complexity and criticality of this item, only the pre-approved source meets the USAF requirements. This source has demonstrated the ability to successfully provide the engineering services and has access to the required data. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

(p) If solicitations synopsized through the GPE will not be made available through the GPE, provide information on how to obtain the solicitation.

N/A.

(q) If the solicitation will be made available to interested parties through electronic data interchange, provide any information necessary to obtain and respond to the solicitation electronically.

N/A.

(r) If the technical data required to respond to the solicitation will not be furnished as part of such solicitation, identify the source in the Government, such as https://www.fedbizopps.gov/, from which the technical data may be obtained.

A technical data package will not be furnished as the Government does not own the technical data for this engineering service.

(17) Place of Contract Performance:

Contractor’s facility.

(18) Set-aside Status:

Two or more small businesses capable of performing this requirement are not available. This requirement is therefore not set aside for small business or any other socioeconomic concerns.