Final 08-06-2012 TO 0001 AFDICE PWS.pdf

Air Force Digital Integration for Combat Engagement (AFDICE) Performance Work Statement (PWS)

TASK ORDER 0001

PERFORMANCE WORK STATEMENT (PWS)

FOR

AIR FORCE DIGITAL INTEGRATION FOR COMBAT ENGAGEMENT (AFDICE)

SUPPORT

AF ISR Agency/A5C

August 6, 2012

1 Table of Contents

1 DESCRIPTION OF SERVICES

1.1 INTRODUCTION

1.2 SCOPE

2 SPECIFIC TASKS

2.1 PROGRAM MANAGEMENT SUPPORT

2.2 ENGINEERING SUPPORT CAPABILITIES

2.3 ANALYSIS SUPPORT

2.4 AUTOMATED DATA PROCESSING (ADP) SUPPORT

2.5 REPORTS MANAGEMENT AND DOCUMENTATION SUPPORT

2.6 MANAGEMENT

2.7 TEST CAPABILITY ACTIVITIES

2.8 SYSTEM SUPPORT

2.9 PROJECT EXECUTION

2.10 QUALITY CONTROL PROGRAM

3 SERVICES SUMMARY (SS)

4 GOVERNMENT INFORMATION/PROPERTY

4.1 GENERAL

4.2 TELEPHONE SERVICE

4.3 FACILITIES, SUPPLIES AND SERVICES

4.4 INFORMATION

5 GENERAL INFORMATION

5.1 CONTRACTOR IDENTIFICATION IN THE GOVERNMENT WORKPLACE

5.2 INDUSTRIAL SECURITY

5.3 LOCATION(S) OF WORK

5.4 HOURS OF OPERATION

5.5 RECORDS

5.6 SAFETY REQUIREMENTS

5.7 KICK-OFF MEETING AND PERIODIC PROGRESS MEETINGS

5.8 CONTRACTOR TRAVEL

5.9 REQUIRED QUALIFICATIONS

5.10 MONTHLY STATUS REPORT

5.11 DELIVERABLES

6 APPENDICES

APPENDIX A - ACRONYMS AND ABBREVIATIONS LIST

APPENDIX B – ESTIMATED WORKLOAD DATA

APPENDIX C - APPLICABLE PUBLICATIONS & INSTRUCTIONS

SECTION 1

1 DESCRIPTION OF SERVICES.

1.1 Introduction.

This is a non-personal services contract Task Order managed by the Air Force

Intelligence Surveillance Reconnaissance Agency (AFISRA) AFDICE Program

Management office. As per Federal Acquisition Regulation (FAR) 37.101 “Non-personal services contract means a contract under which the personnel rendering the services are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees. Therefore, the Government will neither supervise contractor employees nor control the method by which the contractor performs the required tasks. The contractor shall manage its employees and guard against any actions that are of the nature of personal services, or give the perception of personal services. The contractor shall notify the Contracting Officer (CO) immediately if they perceive any actions which constitute personal services. These services shall not be used to perform, any inherently

Governmental functions. As per FAR 2.101, inherently Government function means, as a matter of policy, a function that is so intimately related to the public interest as to mandate performance by Government employees.

1.2 Scope.

1.2.1 This PWS describes the tasks and capabilities required to provide technical and analytical support to the AFISRA, the Air Force (AF), Department of Defense (DoD) and other

Government agencies. The contractor shall perform analysis of architecture and operations to determine baseline capabilities; conduct gap analysis in regard to end-state vision provided by AFISRA’s operational requirements and develop recommended solutions based on gap analysis for desired modernization and integration of ISR data link capabilities. Work shall be accomplished at Nellis AFB, NV and any other locations specified by the government. This overall support is required for the following: the contractor shall provide on-site and virtual System Administration support to configure, update and manage all servers and systems with configuration control updates for all applications supported with Government authorization.

1.2.2 The contractor shall recommend TTPs, provide training, and perform installation preparation based on the locations stated above.

1.2.3 The contractor shall perform systems engineering to include modernization leading to the integration, test, installation, evaluation and training for sustainment and enhancement of existing data link technologies, including but not limited to commercial of the shelf

(COTS)/ Government off the shelf (GOTS).

SECTION 2

2 SPECIFIC TASKS.

General. The contractor shall perform tasks in the areas identified below in order to furnish the

Government with the required services and support. The contractor shall manage and support simultaneous tasks at various stages of development and completion at any given time throughout the life of this Task Order contract.

2.1 Program Management Support.

2.1.1 The contractor shall provide a technical lead to function as the Program Manager (PM).

2.1.2 The contractor shall stay current on all technical aspect of the Digital Integration for

Combat Engagement (DICE) mission and inform the Government COR of all significant changes and developments.

2.1.3 The contractor shall recommend innovative TTPs for improving data exchange system connectivity to improve situational awareness and Combat Identification CID for the tactical warfighter. (Contract Data Requirements List (CDRL A007)

2.2 Engineering Support Capabilities.

2.2.1 The contractor shall provide primary engineering support in the identification of unique information in advanced programs efforts to include all aspects of AFDICE related test design and test plan development integrating advanced technology evaluations for AF weapons systems. (CDRL A002)

2.2.2 The contractor shall provide primary engineering support to AFISRA for the identification of unique information to support USAF emerging capabilities and efforts to include but not limited to: identification and integration of new or unexploited information systems, unique friendly, enemy, or neutral information sources;

development of associated TTP for the timely, accurate, and complete forwarding of tactically actionable and relevant information via Tactical Data Links (TDL); migration of USAF CID information into the Joint Data Network (JDN).

2.2.3 The contractor shall provide primary engineering support to AFISRA for the identification of unique information to support USAF CID efforts to include but not limited to: identification and integration of unique friendly, enemy, or neutral information sources; prioritization of reporting criteria; support in the development of associated TTP for the timely, accurate, and complete forwarding of tactically actionable and relevant information via TDL to simultaneously support time sensitive targeting and situation awareness efforts; integration of identified advanced programs and emerging capability information in the support of USAF CID; migration of USAF CID information into the

JDN.

2.2.4 The contractor shall provide Joint Interface Control (JIC) support to identify the datalink architecture and network design parameters needed to connect the various operational units within the JDN. JIC support shall include Program JDN expertise and Joint Multi-

TDL operational infrastructure point of contact for inter-service coordination. The contractor shall support the utilization of and training on operational equipment configurations. When not included in Operational Tasking Data Links (OPTASKLINK);

the JIC support shall provide any additional information for operations directly to participants via alternate procedures, assume the role of network manager for AFDICE

TDL operations, and develop architectures for events and verify correct inclusion in other architectures that AFDICE will participate in.

2.2.5 The contractor shall perform systems engineering to include research and development, testing and evaluation to recommend the integration, test, installation, evaluation and training for sustainment and enhancement of existing data link architecture and network design to support emerging capabilities, advanced programs missions, ISR (traditional and non-traditional) integration, and interoperability in support of CID into JDN, this includes but is not limited to COTS/GOTS. (CDRLs A001 and A003)

2.3 Analysis Support.

2.3.1 The contractor shall provide the overall supervision, conduct, and support of data management efforts to include but not limited to the following:

2.3.1.1 Database expertise in the design implementation, integration of multi-tiered applications that access relational database management systems, research, development and implement of current and future database software updates and upgrades; ensure compliance with Air Force software quality goals.

2.3.1.2 Configuration management and qualification testing of delivered software products;

develop and implement barcode management software to perform inventory and control of the AFDICE Data Media Library; provide custom analysis tools for the assessment of test data; design and implement Distributed Applications with Microsoft SQL Server;

ensure database security by establishing data access rights for all users. (CDRLs A004 and A007)

2.3.2 The contractor shall develop and coordinate the evaluations, recommend new areas of evaluation for incorporation into evaluation planning efforts, and formulate special studies, to support the AFDICE program. (CDRL A001)

2.3.3 The contractor shall review and develop technical documentation such as test plans, technical and test reports, trade studies, and technical memorandums. The contractor shall baseline the master test system prior to conducting operational test of other systems.

(CDRLs A001 and A002)

2.4 Automated Data Processing (ADP) Support.

2.4.1 The contractor shall develop and integrate ADP equipment and software for the implementation of operational requirements and coordinate with the Government

Contracting Officer’s Representative (COR).

2.4.2 The contractor shall provide technical support for all applicable AFDICE Government

ADP systems.

2.4.3 The contractor shall ensure the operational capability of all hardware and software platforms meets or exceeds established DoD and military operational standards as provided by the Government COR.

2.4.4 The contractor shall coordinate all equipment and software maintenance requests by the

Government, to include coordinating with other agencies, as necessary. This shall include but not limited to preparing, shipping, and receiving equipment deployed for test events and researching components needed for recording test data.

2.4.5 The contractor shall establish configuration control procedures, to ensure no programs or data are modified without Government COR coordination and documentation. The contractor shall record data in accordance with (IAW) applicable government standards and AF Instruction 33-101. (CDRLs A001, A003 and A005)

2.5 Reports Management and Documentation Support.

2.5.1 The contractor shall document, disseminate, and ensure finished AFDICE products, this shall include but not limited to briefings, test results, TTP, architecture designs, and Data

Change Requests (DCRs) (classified/unclassified). The contractor shall use COTS/GOTS products to maintain, track, and update applicable AFDICE publications. (CDRLs A001, A002, A006 and A007)

2.5.2 The contractor shall ensure the Configuration Management Plan (CMP) is kept current.

Evaluate and edit material for content and coordinate the trafficking and inspection of proofs and negotiate revision of materials to be published. Review and edit a wide range of electronic media for structure, comprehensibility, organization, completeness, correctness, graphical design and convert into a standardized format; prepare documents for publishing: CD labeling and packaging, binding and report coverings, paper quality;

coordinate publishing budget estimates and oversee production process; ensure that all material meets internal quality standards and applicable Department of Defense (DoD)

DICE capability policies and standards, while maintaining the current classified and unclassified AFDICE websites. (CDRL A005)

2.6 Management.

2.6.1 The contractor shall ensure overall responsiveness, cost control and reporting, adherence to schedule, ability to adapt to schedule changes, responsible and cooperative behavior, data management, technical quality of work, management of contractor team’s efforts including level of understanding of the AFDICE mission and commitment to customer satisfaction.

2.6.2 The contractor shall ensure risk identification and mitigation associated with this requirement.

2.7 Test Capability Activities.

2.7.1 The contractor shall work with AFISRA and other Government agencies to perform analysis of test capabilities to include but not limited to: identifying test capability requirements, documenting existing test capabilities, identifying shortfalls, performing trade off analyses and recommending approaches to solve issues. (CDRL A001)

2.7.2 The contractor shall perform mission area research, monitor and report on program related meetings, and provide recommendations for continuing AFDICE involvement in assorted projects. (CDRL A001)

2.7.3 The contractor shall work with AFISRA to perform standards and conformance testing to include writing, scheduling, conducting the testing and provide post-test analysis to

AFISRA IAW military standards. (CDRL A001)

2.7.4 The contractor shall perform service level testing only when there is a hardware or software upgrade; no more than two (2) approved tests per year on Multi-Source

Correlation System (MSCS).

2.8 System Support.

2.8.1 The contractor shall provide system administration support that shall include but not limited to configure, update and manage all servers and systems with configuration control updates for all applications supported. The contractor shall document all changes in the Configuration Management Plan. (CDRL A005)

2.8.2 The contractor shall identify all required software licenses within 90 working days before expiration. (CDRL A003)

2.8.3 The contractor shall provide system, server and application level functional and security patch integration ensuring all information security notices are completed and reported.

2.8.4 The contractor shall provide information security oversight and management for monitoring the operational and functional security of systems to include but not limited to site and user operations.

2.8.5 The contractor shall provide technical support for all of AFDICE’s operational, testing, and sustainment equipment needs. This shall include but not limited to coordinating integration on all DoD networks.

2.9 Project Execution.

2.9.1 The contractor shall perform the following tasks:

2.9.1.1 Provide field operations support such as deployment/redeployment, tracking, requesting/scheduling of all resources and overseeing general field test operations needed to achieve stated test objectives.

2.9.1.2 Work with AFISRA/AFDICE Program Manager to conduct site surveys which perform site preparation such as defining site-specific installation, integration, preparation of environmental permit plans and integration of AFDICE equipment with equipment available from other agencies or host areas. (CDRL A001)

2.9.1.3 Provide field equipment support such as identifying and preparing test equipment and calibrating test instrumentation and site support equipment with on-site equipment and power.

2.9.1.4 Provide field communications and frequency management support such as the installation, testing and operation of communication equipment and data links.

2.9.1.5 Provide computer operation support such as system design, analysis of alternative equipment designs, integration of equipment and equipment upgrades for field deployments. (CDRLs A001 and A005)

2.9.1.6 Coordinate airspace and range management support.

2.9.1.7 Conduct system software validation and verification. (CDRL A002)

2.9.1.8 Run computer models, simulations, analyze and characterize the resulting output and provide technical and test reports. (CDRLs A001 and A002)

2.9.1.9 Develop and deliver mission briefings and debriefings and review and update AFDICE documentation. (CDRLs A006 and A007)

2.10 Quality Control Program.

2.10.1 The contractor shall establish and maintain a quality control system that ensures research and development services on communications system is performed IAW this contract, applicable laws and regulations IAW best commercial practices. The contractor shall develop and implement a Quality Control Plan (QCP), which describes in detail an inspection system to cover all services listed in the Service Summary, specific areas to be inspected on both a scheduled and unscheduled basis. The contractor shall provide the

Contracting Officer (CO) the QCP for review and approval within 30 working days of contract award. (CDRL A008)

2.11 Retention.

In the event of personnel turnover, the contractor shall ensure new personnel have the relevant experience, job knowledge and training to accomplish assigned tasks.

SECTION 3

3 SERVICES SUMMARY (SS).

1. The contract service requirements are summarized in performance objectives that relate directly to mission essential items and are in accordance with the basic contract. The performance threshold briefly describes the minimally acceptable levels of service required for each requirement. The SS provides information on contract requirements, the expected level of contractor performance and the expected method of Government validation and confirmation of services provided. These thresholds are critical to mission success. Procedures as set forth in the applicable Inspection clause in the contract will be used to remedy all deficiencies.

Performance Objective PWS PARA Performance Threshold

SS # 1.

The contractor shall conduct quality analysis and provide supportive documents.

2.3 The contractor shall provide draft analysis

documents. No more than two (2) major revisions per each report are acceptable. Final technical and test reports shall incorporate all

Government provided recommendations and comments. Submission of final report requiring any revision is unacceptable

SS#2. The contractor shall test, verify and document the test results to include features and capabilities.

2.2.1,2.3, 2.7 The contractor shall provide technical and test reports for all tests. Tests shall be conducted

IAW test plans and failure to provide test reports which accurately describe the utilized testing process and results is unacceptable.

(CDRL A001)

SS#3. The contractor shall manage and update all servers and systems supported.

2.4, 2.8 There shall be no lapse in service or adverse mission impact as a result of contractor’s failure to manage, update and maintain systems. Failure to install within 60 working days or otherwise directed DoD Information

Security requirement of new update release is unacceptable.

SS#4.

The contractor shall develop and provide site-specific installation and integration plan of AFDICE equipment in conjunction with site survey.

2.9 Plan shall include all equipment, software and

power requirements. Documents shall be provided within five (5) working days after site survey.

SS#5.

The contractor shall track expiration dates of all licenses.

2.8.2 Zero required licenses shall expire during the

year due to contractor error. Notification of expiration is due within 90 work days of expiration date.

SECTION 4

4 GOVERNMENT INFORMATION/PROPERTY.

4.1 General.

The Government will provide the contractor with workspace, and the use of a desk, computer and telephone equipment. This property is being provided without charge for the non-exclusive use of the contractor as a convenience to the Government. The Government retains sole ownership and custody of the property. The Government will provide initial guidance, technical information, subject matter orientation, progressive feedback and appropriate reference material. Should Government property be used by the contractor, it shall be accounted for IAW the Government property clause and the general provisions of the contract on individual task order.

4.2 Telephone Service.

The Government will provide continental United States (CONUS) Defense Switched

Network (DSN) telephone service for official business use only in support of contract requirements.

4.3 Facilities, Supplies and Services.

The Government will provide office space, supplies, computer equipment, access to military local area network (LAN) services (classified and unclassified), telephone and fax

(local, DSN, and long distance), electronic mail, LAN support, reproduction facilities, and facilities to store classified working papers and data (media disks, hard drives, etc.). The contractor shall provide a National Agency Check for on-site employees to be granted LAN access.

4.4 Information.

The Government will provide the following information: access to relevant Government organizations, information and documentation, manuals, texts, briefs, and associated materials as required and available.

SECTION 5

5 GENERAL INFORMATION.

5.1 Contractor Identification in the Government Workplace.

When conversing with Government personnel during business meetings, over the telephone or via electronic mail, the contractor shall identify themselves as such to avoid situations arising where sensitive topics might be better discussed solely between Government employees. The contractor shall identify themselves on any attendance sheet or any coordination documents they may review. Electronic mail signature blocks shall identify their company affiliation.

5.2 Industrial Security.

DD Form 254. Overarching security requirements and contractor access to classified information shall be as specified in the DD Form 254, Department of Defense Security

Classification attached to the contract/task order, if applicable. The contractor shall have a final U.S. Government issued TOP SECRET security clearance and be DCID 6/4 eligible with a current Single Scope Background Investigation (SSBI).

5.3 Location(s) of Work.

The work to be performed under this contract will be performed at the designated

Government facility located in Nellis AFB, NV; Buckley ANGB, CO; Ft George G.

Meade, MD; AF-DCGS Core Sites world-wide, and/or other locations that will be identified.

5.4 Hours of Operation.

5.4.1 Normal Hours of Operation. The contractor shall perform the services required under this contract during the following hours: 0800-1700, Monday through Friday (excluding federal holidays).

5.4.2 Recognized Holidays. The contractor is not required to provide services on the following days: New Year’s Day, Martin Luther King Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Days, Thanksgiving Day and

Christmas Day. If the holiday falls on Saturday, it is observed on Friday. If the holiday falls on a Sunday, it is observed on Monday.

5.5 Records.

The contractor shall create, maintain and dispose of only those Government required records that are specifically cited in this PWS or required by the provisions of mandatory

Applicable Publications and Instructions (Reference Appendix C). If requested by the

Government, the contractor shall provide the original record or a reproducible copy of any such record within five (5) work days of receipt of the request. (CDRL A001)

5.6 Safety Requirements.

In performing work under this contract, the contractor shall:

5.6.1 Conform to the safety requirements contained in the contract for all activities related to the accomplishment of the work.

5.6.2 Take immediate precautions as the CO may reasonably require for safety and mishap prevention purposes.

5.6.3 Record and report promptly (within one hour) to the CO or COR, all available facts relating to each instance of damage to Government property or injury to either contractor or Government personnel.

5.6.4 In the event of an accident/mishap, take reasonable and prudent action to establish control of the accident/mishap scene, prevent further damage to persons or property, and preserve evidence until released by the accident/mishap investigative authority through the CO.

5.6.5 If the Government elects to conduct an investigation of the accident/mishap, the contractor shall cooperate fully and support Government personnel conducting the investigation.

5.7 Kick-off Meeting and Periodic Progress Meetings.

The contractor shall develop and execute an initial kick-off meeting at Nellis AFB, NV, within 10 business days of the initial award of the TO. The CO, COR, and other

Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the CO will apprise the contractor of how the Government views the contractor's performance and the contractor shall apprise the

Government of problems being experienced. Appropriate action shall be taken to resolve outstanding issues. The contractor shall provide minutes of these meetings to the

Government within five (5) work days after meeting. (CDRL A009)

5.8 Contractor Travel.

5.8.1 The contractor shall travel to attend meetings, gather information and participate in events in support of tasks listed in the PWS as required in each individual TO. Actual expenses shall be IAW Joint Travel Regulations and shall be approved by the Government prior to travel. The contractor shall not exceed the travel allocation. Where feasible, the contractor shall use teleconferencing; electronic media transfers of data and use the Letter of

Identification (LOI) to the maximum extent possible to support the Air Force in reducing costs. The contractor shall provide a trip report five (5) working days after conclusion of travel. (CDRL A009)

5.8.2 The contractor shall perform travel to various locations within the continental United

States (CONUS). The contractor shall perform overseas travel (OCONUS) if required.

All travel shall be performed IAW the Joint Travel Regulation (JTR). The contractor shall not commit to travel without prior approval of the Government. Costs for travel shall be billed on a strictly cost reimbursable basis IAW, the regulatory implementation of Public Law 99-234, FAR subpart 31.205-46 entitled Travel Costs and the limitation of funds specified in this contract.

5.9 Required Qualifications.

This section is a layout of the minimum requirements for each position. The contractor shall meet the following qualifications:

5.9.1 The contractors shall complete and maintain at least a TS/SCI security clearance.

5.9.2 Joint Data Network Integration:

The contractor shall have a three (3) to five (5) year background in multi-Service network design; Joint Service data link capable systems and associated architectures. The contractor shall maintain knowledge of current systems and associated software updates and upgrades. The contractor shall review and develop technical documentation such as test plans, trade studies, architecture diagrams, and technical memorandums. (CDRLs

A001 and A002)

5.9.3 Analysis Support:

The contractor shall be familiar with: Air Defense System Integrator (ADSI) Version

10.X+; Multi- TDL Display System (MTDS), Joint Range Extension (JRE), MSCS, Multi-Source Correlator Tracker (MSCT) and Force XXI Battle Command, Brigade and

Below (FBCB2), Trusted Manager II, Radiant Mercury, and other applicable and associated data networks, hardware and software.

5.9.4 Reports Management and Documentation Support:

The contractor shall have experience in the AFTTP 3-1 process and cycles, Joint publications and the DCR process, activities and test and evaluation reporting formats.

5.10 Monthly Status Report.

The contractor shall develop and provide an electronic monthly status report to the

Government no later than the 15 th work day of every month. The monthly status report shall contain all activities conducted in the previous month for this TO. (CDRL A010)

5.11 Deliverables.

Reports and other data required in this PWS shall be submitted IAW the CDRL in Exhibit

01 of the contract.

CDRL # Data Item Number Data Item Description PWS Para. Delivery Schedule

A001 DI-MISC-80508 Technical and Test

Reports – Study Service

2.2.5, 2.3.2, 2.3.3, 2.4.5, 2.5.1, 2.7.1, 2.7.2, 2.7.3, 2.9.1.2, 2.9.1.5, 2.1.9.8, 5.5, 5.9.2

Shall be provided NLT thirty

(30) work days after test conclusion

A002 DI-NDTI-80566 Test Plans 2.2.1, 2.3.3, 2.5.1, 2.9.1.7, 2.9.1.8, 5.9.2, 5.5

Shall be provided NLT sixty

(60) work days prior to start of test

A003 DI-MCCR-80700 Computer Software

Product End Item

2.2.5, 2.4.5, 2.8.2 Shall be provided NLT ninety

(90) work days after

Government request to the

Government COR

A004 DI-IPSC-81437 Database Design

Description

2.3.1.2, 5.5 Shall be provided NLT sixty

(60) work days after

Government request to the

Government COR

A005 DI-CMAN-80858 Contractor’s Configuration

Management Plan

2.4.5, 2.5.2, 2.8.1, 2.9.1.5, 5.5

Shall be provided NLT thirty

(30) work days after kickoff meeting

A006 DI-ADMN-81373 Presentation Material 2.5.1, 2.9.1.9, 5.5 Shall be provided NLT three

(3) work days after conference or presentation

A007 DI-ADMN-80925 Revision to Existing

Government Documents

2.1.3, 2.3.1.2, 2.5.1, 2.9.1.9, 5.5

Shall be provided NLT five

(5) work days after

Government request to the

Government COR.

A008 DI-CMAN-80789 Quality Control Plan 2.10.1, 5.5 Shall be provided NLT thirty

(30) working days after contract award to the

Government COR. After receipt, the Government will provide comments within 15 working days draft receipt.

Contractor shall provide final copy to Government within five (5) working days after the draft provided to contractor.

A009 DI-ADMN-81505 Report, Record of

Meeting/Minutes

5.7, 5.8.1, 5.5 Shall be provided NLT five

(5) working days after meeting to the Government

COR.

A010 DI-MGMT-80368A Monthly Status Report 5.10, 5.5 Shall be provided NLT the th working day of every month.

SECTION 6

6. APPENDICES

A. Acronyms and Abbreviations List

B. Estimated Workload Data

C. Applicable Publications and Instructions

APPENDIX A - ACRONYMS AND ABBREVIATIONS LIST

Acronym/Abbreviation Definition

ADP Automated Data Processing

AF Air Force

AFB Air Force Base

AFDICE Air Force Digital Integration for Combat Engagement

AFI Air Force Instruction

AFISRA Air Force Intelligence, Surveillance, & Reconnaissance Agency

AFMAN Air Force Manual

ATC Authority to Connect

ATO Authority to Operate

C&A Certification and Accreditation

CCW Command and Control Wing

CDRL Contract Data Requirements List

CFR Code Federal Regulation

CID Combat Identification

CIK Crypto Ignition Key

CMP Configuration Management Plan

CO Contracting Officer

COMSEC Communication Security

CONUS Continental United States

COR Contracting Officer’s Representative

COTS Commercial Off the Shelf

CRO COMSEC Responsible Officer

DAA Designated Approving Authority

DCR Data Change Requests

DICE Digital Integration for Combat Engagement

DoD Department of Defense

DSN Defense Switched Network

FAR Federal Acquisition Regulation

GCIC Global Cyberspace Integration Center; now known as the AF

Command and Control Integration Center (AF2IC)

GOTS Government Off the Shelf

IA Information Assurance

IATO Interim Authority to Operate

IATT Interim Authority to Test

IAW In Accordance With

ISR Intelligence Surveillance Reconnaissance

JDICE Joint Digital Integration for Combat Engagement

(now known as AFDICE)

JDN Joint Data Network

JIC Joint Interface Control

LAN Local Area Network

MTC Multi-TDL Capability

MSCS Multi-Source Correlation System

MSCT Multi-Source Correlator Tracker

NAC National Agency Check

NDA Non-Disclosure Agreement

OSHA Occupational Safety and Health Act

OPTASKLINK Operational Tasking Data Links

PBSA Performance Based Service Acquisition

PWS Performance Work Statement

QA Quality Assurance

QASP Quality Assurance Surveillance Plan

QCP Quality Control Plan

SS Services Summary

SSAA System Security Authorization Agreement

SSBI Single Scope Background Investigation

SVRO Secure Voice Responsible Officer

TO(s) Task Orders

TDL Tactical Data Links

TTPs Tactics, Techniques, and Procedures

USAF United States Air Force

APPENDIX B - ESTIMATED WORKLOAD DATA

The historical workload data provided is for informational purposes only and is based upon historical data. Contractors shall propose based on their own technical approach.

A. BACKGROUND:

1. Distributed Common Ground Systems (DCGS) Data Link Optimization and Tactics, Techniques, and Procedures (TTP) development. (October 2008 - September 2009) Engineering and Engineering Support Services at five (5) core Distributed Ground Site(s) (DGS). Test preparations, test executions, technical and test reports, site specific TTP development, publishing, and training. (2 personnel x 12 months= 1920 hours x2 = 3840 hours)

Joint Digital Integration for Combat Engagement (JDICE) through indefinite delivery indefinite quantity (IDIQ) contract modification was tasked to address optimization of data link operations within the AF DCGS enterprise. JDICE was selected based on its roles and authorities under

SAF/XC as the integration, development and evaluation agent for Joint Data Network (JDN)

TTP for combat identification, advanced programs and emerging capabilities. The primary objective; optimize the data link operations of the AF DCGS enterprise and the DGS Data Link

Operator (DLO) in accordance with theater requirements and AF DGS CONOPS. Areas addressed included data link systems, architecture, datalink and security guard equipment configuration, DLO crew procedures, COCOM/MAJCOM ROE, training, and TTP development.

2. Multiple Source Correlation System's (MSCS) Risk Reduction Study. Specified test event at

JDICE lab and DCGS core sites (5 Sites) (February - July 2010). Engineering and Engineering

Support Services. Test preps, test executions, test reports. (2 personnel x 6 months (160 hours/mo) = 1920 hours)

The overall purpose of the risk-reduction events was to confirm the MSCS’ ability to transmit specific track types via the MSCS Multi-TDL Capability (MTC) link architecture to a distant-end Joint Range Extension (JRE). Sixty-eight (68) specific links with 16 compatible tracks were selected to verify transmission integrity for inclusion in the DGS

DLO TTP. In addition, four (4) track specific type changes were sent to verify the MTC link. The primary objective for the risk reduction event was: (1) successfully transmit specific link 16 track types from the MSCS to a distant-end JRE via an IP connection using the MTC protocol. (2) Intent: Ensure integrity of the data across the IP connection using the MTC protocol.

3. Tactical Data Link, Subject Matter Expert, Liaison, for Tactical Data Dissemination for new

Quick Reaction Capabilities. (October 2009 - September 2010) [One (1) man-year at HQ

AFISRA (1920 hours)]

APPENDIX C - APPLICABLE PUBLICATIONS and INSTRUCTIONS

The contractor shall comply with all publications, regulations and operating instructions provided by the Government when they pertain to the procedures for materials expediting herein and where the contractor is authorized by the PWS to accomplish the work specified in the publication, regulation or operating instructions. The publications prescribe USAF policies, use of materials, procedures and processes applicable to the work requirements. The contractor shall acquire and work with the latest version of the publication(s). Below is the primary list but not all inclusive list of applicable publications. Any applicable publications not listed below will be identified at the task order level.

Publication/Instruction – Title Applicable

Paragraph/Chapter

PWS

Paragraph Military Standard (MIL-STD-6016 Series Entire Document 2.7.3

Air Force Instruction 33-101 Entire Document 2.4.5

MIL-STD-3011 Series Entire Document 2.7.3

MIL-STD-6011 Series Entire Document 2.7.3

MIL-STD-6020 Series Entire Document 2.7.3

Chairman Joint Chiefs of Staff Manual (CJCSM) 6120.01

Series

Entire Document 2.7.3

CJCSM 3115.01 Series Entire Document 2.7.3

MIL-STD-6018 Series Entire Document 2.7.3

*NOTE: PUBLICATIONS NOT AVAILABLE PUBLICLY WILL BE PROVIDED UPON REQUEST.