Binder_A-2_-_Manuals.pdf

SECT. IIA PAGE 37

Featuring the

"Advanced Closed System +3"

Cooking Modes:

�� Hot Air �� Retherm �� "Delta T" slow cooking �� Steam �� "Cook & Hold" �� "Crisp & Tasty" �� Combi

Cleveland Standard Features:

�� "Advanced closed system" with "Crisp & Tasty" de-moisturizing feature �� Efficient heating system saves energy and provides fast heat up times �� Fully insulated cooking compartment for maximum energy savings �� Polished cooking compartment with coved corners for easy cleaning �� Five (5) 26" x 20" wire shelves �� Hinged fan guard and hinged removable pan racks �� Two (2) speed auto reversing convection fan for even heat distribution �� Space saving, easy to close "Disappearing Door" �� Door latch with safety vent position and wear-free door switch �� Vented, double glass door with integrated door stop and self draining condensate drip pan �� Easy to change, press-fit door seal �� Oven light with shock resistant safety glass �� Multipoint core temperature probe �� Easy to use electronic controls for all operational functions �� Self diagnostic system with full text message display �� Easy to understand menu icons with bright graphics display �� User friendly selector dial �� Exclusive "Smart Key " for selecting option settings �� Digital controls for temperature, time and core probe settings �� Eight (8) "Press & Go" one step, recipe start buttons �� Cook book library for up to 250 stored recipe programs, each recipe capable of 20 steps �� RS 232 connection for controlling one unit with a PC (personal computer) �� Memory module automatically saves unit settings and recipes �� Manual program override feature for operational settings �� Smooth action hand shower for compartment cleaning �� Injection system for steam

Options and Accessories � ConvoClean automatic compartment washing system � PC-HACCP software for establishing "HACCP controls" and automatic documentation of the cooking process � Equipment stand(s) � Equipment stand(s) with Casters

� Stacking kit for mounting one (1) OES-6.20 model on top of one (1) OES-10.20

� Universal pan-rack system to hold full size sheet pans without the use of wire shelves

� Lockable cover over operating controls for prison installations � USB or RS 485 connection for networking and controlling up to 32 units with a personal computer � Plate rack for banquet operations � Plate rack cart � Thermal cover for plate or pan rack � ConvoClean compartment cleaning solution � ConvoCare concentrate for compartment rinse cycle � "Dissolve" generator descaling solution � Chicken Grill Rack � 12" x 20" Wire Baskets for frying products � Additional 26" x 20" Wire Shelves � Special Baking Rack System � 480 volt option � Kleensteam II Water Filters

Short Form Specifications

Shall be Cleveland Model: OES-10.20 Combination Convection Oven / Steamer with simple to operate electronic programmable controls for Hot Air, Convection Steam, and Combination cooking modes, "Cook & Hold" and "Delta T" slow-cooking capabilities, "Advanced Closed System" with "Crisp & Tasty" de-moisturizing feature. Multiple cooking stage programs, stored recipe library, multipoint core temperature probe, "Press & Go", one-step recipe start buttons, "Smart Key" for selecting option settings, two (2) speed auto reversing convection fan, boilerless. "Disappearing Door". Capacity for ten (10) 18" x 26" full size sheet pans, or twenty (20) 12" x 20" x 2 1/2" pans.

MODEL: � OES-10.20

CAPACITY: Eleven (11) - 18” by 26” by 1” full size sheet pans* or

Twenty-two (22) - 13” by 18” by 1” half size sheet pans* or Twenty (20)) - 12” x by 20” by 2 1/2” steam table pans *On wire racks. Additional wire racks required for maximum capacity.

ELECTRIC HEATED – Boilerless

Cleveland

Project ________________________________

Item __________________________________

Quantity _______________________________

FCSI Section ____________________________

Approval _______________________________

Date __________________________________

1333 East 179 St., Cleveland, Ohio, U.S.A. 44110

Tel: 1-216-481-4900

Fax: 1-216-481-3782

Web Site: www.ClevelandRange.com

Email: Steam@ClevelandRange.com

COMBI OVEN-STEAMER

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.

Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.

Cleveland Range equipment is built to comply with applicable standards for manufacturers.

SECT. IIA PAGE 38

W1

W2

D

RC

S

CS

AV

G

E1

E2

W1

W2

D

RC

S

CS

AV

G

E1

E2

W1

W2

D

RC

S

CS

AV

G

E1

E2

A = Water hook up soft water G" B = Water hook up cold water G" C = drainage hook up DN50 D = power hook up E = Potential equaliser F = Final rinse hook up G = Cleaner hook up H = Air vent pipe I = Low pressure safety

OEB 10.20

A = Water hook up soft water G" B = Water hook up cold water G" C = drainage hook up DN50 D = power hook up E = Potential equaliser F = Final rinse hook up G = Cleaner hook up H = Air vent pipe I = Low pressure safety

OES 10.20

OGB 10.20

OGS 10.20

A = Water hook up soft water G" B = Water hook up cold water G" C = Drainage hook up DN50 D = Power hook up E = Potential equaliser F = Final rinse hook up G = Cleaner hook up H = Air vent pipe I = Low pressure safety J = Gas hook up R" K = Exhaust pipe gas

47.92"

2.52" 1.58"

.9

8"

6.00"

1.82"

.9

8"

.4

4"

2.

12.68"

2.80"

8.55"

3.

3.

7.

.0

7"

3.23"

.2

6"

10.87"

41.42" 3.27"

6.93"

.4

0"

.1

9" 2.

.2

9" 1.

29.61"

3.90"

3.00"

4.97"

S

AV

E1

E2

RC

CS

W1

W2

D

G

FRONT VIEW

TOP VIEW

.4

4"

2.

12.68"

2.80"

8.55"

3.

7.

.0

7"

S

AV

E1

TOP VIEW

BOTTOM VIEW

3.23"

.2

6"

10.87"

41.42" 3.27"

6.93"

.4

0"

.1

9" 2.

.2

9" 1.

29.61"

3.90"

3.00"

4.97"

RC

CS

W1

W2

D

G

BOTTOM VIEW

47.92"

2.52" 1.58"

.9

8"

6.00"

1.82"

.9

8"

FRONT VIEW

47.92"

2.52" 1.58"

.9

8"

6.00"

1.82"

.9

8"

.4 4"

2.

12.68"

2.80"

31.50"

3.

.0

7"

3.23"

.2

6"

10.87"

41.42" 3.27"

6.93"

.1

9" 2.

.2

9" 1.

29.61"

3.90"

3.00"

4.97"

S

AV

RC

CS

W1

W2

D

FRONT VIEW

TOP VIEW

BOTTOM VIEW

31.50" 31.50"

The "Advanced Closed System" offers the following advantages:

�� Saves energy �� Automatic moisture level adjustment �� Low heat and steam emission to the kitchen �� Automatically regulated steam injection �� Enables immediate change into the steam mode �� "Crisp & Tasty" demoisturizing function

Model: OES-10.20

Pan Capacity [Unit has 11 slide rails at 2.64" (67mm) apart]:

11 (20" x 26") full size wire racks 11 (18" x 26") full size sheet pans - on wire racks 22 (13" x 18") half size sheet pans - on wire racks 20 (12" x 20" x 2 1/2") steam table pans 22 (12" x 20" x 1") steam table pans 20 (12" x 20") frying baskets - (no wire racks needed)

For Banquet Operations: Optional Plate Rack holds 63 plates

Unit Dimensions: Width - 52.26", Depth - 43.24", Height - 45.68"

Shipping Dimensions: Width - 58", Depth - 49", Height - 54" (including packaging)

Shipping Weight: 540 Lbs

Required Clearances: Rear - 2", Left Side - 4", Right Side - 2 1/2"

• Allow for sufficient distance if a "high heat source" (i.e. Broiler) is located next to the unit.

• Allow for sufficient clearance on left side for service access (contact the factory service department for recommendations).

• Installation must comply with all local fire and health codes.

Agency Approvals: UL, UL - Sanitation (NSF Standards)

Electrical Requirements: 208/3/60 240/3/60 440/3/60 480/3/60 Total Connected Load: 26.3 KW 34.9 KW 29.4 KW 34.9 KW Hot Air: 25.8 KW 34.3 KW 28.8 KW 34.3 KW Amps per Phase: 77.8 88.8 41.4 44.9 Do not connect to a G.F.I. outlet

Water Connections: Cold Water (drinking water quality) Flow Pressure: 30 - 60 PSI Water Inlets: 3/4" GHT-F (Female Garden Hose Connection)

Treated Water for Steam Production

Untreated Water for Condenser and Hand Shower

Drain Connection: 2" Tube

Venting: Exhaust Hood required

Air Vent

*Connection for Cleaning Solution

*Connection for Rinse Cycle

Low Pressure Safety Valve

*Available as an option

W1

W2

D

RC

S

CS

AV

G

E1

E2

W1

W2

D

RC

S

CS

AV

G

E1

E2

W1

W2

D

RC

S

CS

AV

G

E1

E2

W1

W2

D

RC

S

CS

AV

G

E1

E2

W1

W2

D

RC

S

CS

AV

G

E1

E2

SINGLE TF DBC

W/SMART FUNNEL®

S/N SNG0033000 & UP

INSTALLATION & OPERATING GUIDE

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

To ensure you have the latest revision of the manual or to obtain the illustrated parts catalog, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates. Contact Bunn-O-Matic Corporation at 1-800-286-6070 to obtain a paper copy of the required Illustrated Parts Catalog mailed via U.S. Postal Service.

35879.0001 04/09 ©2005 Bunn-O-Matic Corporation

INTRODUCTION

The brewer incorporates a wireless interface system that allows the DBC Grinder to load certain information into the "programming chip" located inside the handle of the funnel. This information includes what flavor of coffee is being ground and what batch size will be brewed (small, medium, or large). Once the correct flavor name and amount of coffee is ground, the funnel is loaded into the brewer. The information from the funnel handle is then transferred into the brewer. The brewer then takes this information and dispenses the amount of water preset in the brewer for that particular flavor of coffee and batch size. The brewer can also be programmed to adjust different functions of the brewing process, such as brew temperature, brew volumes, bypass percentages, pulse brew, etc. This allows the operator to program a certain "recipe" for each coffee flavor to be brewed.

35879.1 012609

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor.

2) Electronic circuit and/or control boards: parts and labor for 3 years.

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis:

parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S

SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

BrewWISE, BrewLOGIC, BrewMETER, BrewWIZARD, Bunn Gourmet, BUNN Gourmet Ice, BUNN Pour-O-Matic, BUNN, Bunn-OMatic, Bunn-O-Matic, BUNNlink, BUNNserve, BUNNSERVE, BUNN Espress, Cool Froth, DBC, Dr. Brew, Dual, Easy- Clear, EasyGard, Easy Pour, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, IMIX, Infusion Series, Intellisteam, Quality Beverage Equipment Worldwide, The Mark of Quality in Beverage Equipment Worldwide, My Café, PowerLogic, Safety-Fresh, Scale-Pro, Silver Series, Single, Smart Funnel, Smart Hopper, SmartWAVE, Soft Heat, SplashGard, System III, ThermoFresh, 392, AutoPOD, AXIOM, Beverage Profit Calculator, Beverage Bar Creator, BUNNsource, Coffee At Its Best, Digital Brewer Control, Nothing Brews Like a BUNN, Pouring Profits, Pulse Wave, Signature Series, Smart Heat, Tea At Its Best, The Horizontal Red Line, Titan, Ultra, are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

USER NOTICES

The notices on this brewer should be kept in good condition. Replace unreadable or damaged labels.

35879.1 011108

00656.0000

00831.0000

00658.0000

20201.5600

37881.0000

03408.0004

03409.0004

27508.0000

This equipment must be installed to comply with the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Adminis-tration (FDA). For models installed outside the U.S.A., comply with the applicable Plumbing /SanitationCode.

Artwork for P/N: 39803.0000 Artwork Rev: A Drawn: REF Date: 02/26/07

MAIN ON/OFF

SWITCH

39803.0000

00824.000000824.0000

00824.0001

Page 4 35879.1 110507

ELECTRICAL HOOK-UP

WARNING – If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personel with a special cord available from the manufacturer or its authorized service personel in order to avoid a hazard. Improper electrical installation will damage electronic components. Damage caused by incorrect electrical connections is not covered by warranty.

1. An electrician must provide electrical service.

2. Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

NOTE - The brewer is shipped without a plug on the power cord. Qualified service personnel must select and install the proper UL listed grounding type attachment plug specified on the rear of the brewer.

3. Install the specified plug on the attached power cord.

4. Remove the front panel beneath the sprayheads to gain access to the terminal block.

5. Connect the brewer to the power source and verify the voltage at the terminal block before proceeding.

6. If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumb-ing has been hooked up, the brewer is ready for Initial Set-Up.

WARNING – Electrical connections must be made as specified above. Failure to follow these instructions can result in personal injury, property or equipment damage.

120/208 and 120/240 volt ac single phase, 60 Hz models

Note: This electrical service consists of 3 current carrying conductors (Neutral, L1 and L2) and a separate conductor for earth ground.

L2

N

L1

G

L2 RED

WHITE

GREEN GREEN

NEUTRAL

L1 BLACK

L2 RED

WHITE

NEUTRAL

L1 BLACK

ELECTRICAL REQUIREMENTS (Models with power cord) WARNING - The brewer must be disconnected from the power source until specified in Initial Set-Up.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

N

L1

G

WHITE

GREEN GREEN

NEUTRAL

L1 BLACK

WHITE

NEUTRAL

L1 BLACK

120 volt ac single phase, 60 Hz models

Note: This electrical service consists of 2 current carrying conductors (Neutral and L1) and a separate conductor for earth ground.

To reduce the risk of electric shock, do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

USER NOTICES (cont.)

37881.0002

L1, L2, L3, are the 3 phases V1 = Phase to phase voltage, between any 2 phases.

V2 = Phase to neutral voltage, L1 to neutral must be 120V.

SYSTEM

VOLTAGE V1 V2

208 208 120 240 240 120

CAUTION: Do not connect L1 to a circuit operating at more than 150 volts to ground.

200 and 230 volt ac single phase, 60 Hz models

Note: This electrical service consists of 2 current carrying conductors (L1 and L2) and a separate conductor for earth ground.

120/208 and 120/240 volt ac three phase, 50 Hz models

Note: This electrical service consists of 4 current carrying conductors (Neutral, L1, L2 and L3) and a separate con-ductor for earth ground.

ELECTRICAL HOOK-UP

CAUTION – Improper electrical installation will damage electronic components. Damage caused by incorrect electrical connections is not covered by warranty.

1. An electrician must provide electrical service as specified.

2. Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

3. Remove the front panel beneath the sprayheads to gain access to the terminal block.

4. Feed the cord through the strain relief and connect it to the terminal block.

5. Connect the brewer to the power source and verify the voltage at the terminal block before proceeding. Re-place the front panel.

6. If plumbing is to be hooked up later be sure the brewer is disconnected from the power source. If plumbing has been hooked up, the brewer is ready for Initial Set-Up.

WARNING – Electrical connections must be made as specified above. Failure to follow these instructions can result in personal injury, property or equipment damage.

ELECTRICAL REQUIREMENTS (Models without power cord) WARNING - The brewer must be disconnected from the power source until specified in Initial Set-Up.

Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements.

L2 RED

WHITE

GREEN

NEUTRAL

L1 BLACK

L3 BLUE

GREEN

L2 RED

200 or 230V

GREEN

L1 BLACK

GREEN

35879.1 071405

PLUMBING REQUIREMENTS

This brewer must be connected to a cold water system with operating pressure between 20 and 90 psi (138 and 620 kPa) from a 1⁄2" or larger supply line. A shut-off valve should be installed in the line before the brewer. Install a regulator in the line when pressure is greater than 90 psi (620 kPa) to reduce it to 50 psi (345 kPa). The water inlet fitting is 3⁄8" flare or female quick connect.

NOTE – Bunn-O-Matic recommends 3⁄8" copper tubing for all installations from the 1⁄2" water supply line. A tight coil of copper tubing in the water line will facilitate moving the brewer to clean the counter top. Bunn-O-Matic does not recom-mend the use of a saddle valve to install the brewer. The size and shape of the hole made in the supply line by this type of device may restrict water flow.

This equipment must be installed to comply with the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA). For models in-stalled outside the U.S.A., you must comply with the applicable Plumbing/Sanitation Code for your area.

PLUMBING HOOK-UP

NOTE - If a backflow preventer is required by code, a shock arrestor should be installed between backflow pre-venter and dispenser. Installing the shock arrestor as close to dispenser as possible will provide best results.

1. Flush the water line and securely attach it to the flare fitting located on bottom of brewer.

2. Turn on the water supply.

35879.1 043009

CE REQUIREMENTS

• This appliance must be installed in locations where it can be overseen by trained personnel.

• For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.

• Appliance shall not be tilted more than 10° for safe operation.

• An electrician must provide electrical service as specified in conformance with all local and national codes.

• This appliance must not be cleaned by water jet.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given instructions concerning use of this appliance by a person responsible for its safety.

• Children should be supervised to ensure they do not play with the appliance.

• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel with a special cord available from the manufacturer or its authorized service personnel in order to avoid a hazard.

(a) MAIN ON/OFF SWITCH This switch, located under the brewer behind the front leg, turns power on and off to all components in the brewer.

(b) BATCH SELECTOR SWITCHES Pressing the switch corresponding to the Small, Medium, or Large batch selects the amount of coffee to be brewed. Pressing a different switch after a brew cycle has been initiated does not change the brew batch in progress. Light indicates the selected batch to brew.

(c) ON/OFF SWITCH (ENABLE BREW) Pressing the ON/OFF switch alternately turns the brewer on and off. Pressing this switch during the brew cycle will interrupt the brew cycle, stopping the flow of water. Pressing this switch during the programming of the brewer will exit the setup and return to the main screen.

(d) BREW SWITCH Momentarily pressing and releasing this switch begins a brew cycle.

(e) ® SWITCH Pressing and holding the ® switch allows entry to the programming menus. Pressing and releasing the switch steps through each function screen during programming.

(f) FUNCTION SCREEN This is the display which shows the various functions of the brewer and allows the programming to be ac-complished.

(g) FUNCTION SCREEN SWITCHES These are the hidden switches which are used to program the brewer.

(h) FUNNEL SENSING COILS This is used to "receive" information from the Smart Funnel handle (coffee name and batch size), and also from RECIPE CARDS.

(j) SCROLL BACKWARDS The upper left corner of the B in BUNN can be used to scroll backwards through the function list.

b cd ef g

OPERATING CONTROLSf h j

P2725

35879.1 062107 a

INITIAL SETUP

CAUTION – The brewer must be disconnected from the power source throughout the initial setup, except when specified in the instructions.

1. Insert an empty funnel into the funnel rails of the brew station.

2. Place an empty server under the funnel.

3. Connect the brewer to the power source. Water will begin flowing into the tank and stop when the tank is filled to its capacity. Display will show PLEASE WAIT...TANK FILLING until tank is filled with water.

4. Wait approximately 20 mins for the water in the tank to heat to the proper temperature on 120V/208V ma-chines. (Wait approximately 45 mins on 120V machines). Display will show READY TO BREW...WATER TEMP: XXX˚ when tank is at operating temperature.

5. Place a small vessel beneath the faucet and open the faucet handle. Release it when you hear the tank refill-ing.

6. Water volumes have been preset at the factory. Refer to adjustments for the Set Brew Volumes section of this manual should the volume need to be increased or decreased.

7. The brewer is now ready for use in accordance with the coffee brewing instructions.

COFFEE BREWING

1. Insert a BUNN filter into the Smart Funnel.

2. If a grinder is not used to obtain the coffee grounds, pour the proper amount of fresh coffee grounds into the funnel and level by gently shaking. Slide the funnel into the funnel rails and select batch size. Proceed to step 5.

3. If a G9-2T DBC or MHG grinder is used with a compatible Smart Funnel, select the desired batch size on the grinder. Grind the selected amount of fresh coffee into funnel and level grounds by gently shaking. It is not necessary to select a size on the brewer.

4. Slide the funnel into the funnel rails. The brewer will read the size ground through the chip in the funnel handle and will automatically select the correct size to brew.

5. Place an empty server under the funnel.

6 The ENABLE BREW switch must be ON (indicator lit). Momentarily press and release the BREW switch. If the brewer has the funnel lock option and if it is activated, once a brew cycle has been started the funnel is locked in place. There may be certain situations in which the brew cycle will not begin when BREW switch is pressed:

a) ENABLE BREW must be ON.

b) BREW TEMPERATURE TOO LOW - wait until heated or cancel BREW LOCKOUT option.

c) FUNNEL NOT IN PLACE (or using a standard brew funnel) - cancel FUNNEL DETECT.

d) CHECK FUNNEL - remove funnel, empty previously brewed grounds and grind a new batch into the fun-nel.

7. If none of the above messages are displayed, the display will read NOW BREWING and the time remaining in the brew cycle.

8. Following the BREW will be a countdown DRIPPING time which shows the time remaining until the funnel lock will release. Discard the grounds and filter only after visible dripping stops.

35879.1 062107

CLEANING

1. The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic equipment. Do NOT clean this equipment with a water jet device.

2. Check and clean each sprayhead. The sprayhead holes must always remain open.

NOTE: Any buildup on the sprayhead and fitting may restrict water flow, and impact your coffee brewing. For consistently great coffee, clean sprayhead and fittings weekly with sprayhead cleaning tool (#38227.0000).

Upon visual inspection it may appear that light passes through all holes in the sprayhead plate, but a thin film of residue can pass light and still impede water flow.

3. Insert the long end of sprayhead cleaning tool into the sprayhead fitting, and rotate several times to remove any mineral deposits from the fitting.

4. Insert the short end of sprayhead cleaning tool into the bypass fitting, and rotate several times to remove any mineral deposits from the fitting.

5. Remove sprayhead from brewer. Disassemble by removing the seal.

6. Use the pointed end of sprayhead cleaning tool to remove any mineral deposits from the sprayhead holes.

7. Reassemble sprayhead and reattach. Sprayhead only needs to be hand tightened.

Refer to Programming Manual on the Buun-O-Matic website. at www.bunn.com for calibration routine to verify sprayhead flow rate matches programmed flow rate. Machine may need to be re-calibrated due to lime build up. If machine is cleaned and build up removed, machine must be re-calibrated to achieve desired volumes.

35879.1 080108

REACH-IN

REFRIGERATORS

REFRIGERATORS

Utilizing Environmentally Safe, CFC-free R-134a Refrigerant

DL1R-SS

DL2R-SS

DL3R-SS

Standard Features •Modern, State-of-the-Art Styling

•Performance Rated “Plug” Refrigeration

System Utilizing Environmentally Safe R-134a

Refrigerant

•3" Non-CFC Polyurethane Foam Insulation

•Chrome-Plated Flow Line Handles

•Cam-Action Lift-Off Hinges

•Self-Closing Doors

•Magnetic Snap-In Door Gasket

•Cylinder Lock in Each Door

•Automatic Hot Gas Condensate Evaporator

•Adjustable 6" Stainless Steel Legs

•Heavy-Duty, Epoxy-Coated SteeL Shelves

•External Digital Thermometer

Models Available

• Half Door • Pass-Thru

• Remote • Consult Factory

Standard (S/S Front, Aluminum Ends & Interior)

Suffix SA (S/S Exterior, Aluminum Interior)

Suffix SS (S/S Exterior & Interior)

RREEFFRRIIGGEERRAATTIIOONN SSYYSSTTEEMM

A “performance rated”, air-cooled, hermetically sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized fin coil and air circula-tion fans are contained within a concealed “plug”-type insulated housing, readily accessible on top of the cab-inet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with environmentally safe R-134a refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed if freezer conversion is desired.

Refrigerators are designed to maintain 38-40 degrees

Fahrenheit (3 to 5 degrees Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100 degrees Fahrenheit. All conden-sate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and com-ponents to certify that each model conforms to the most exacting standards. All models are factory perform-ance-tested for a minimum of 16 hours prior to crating.

CCAABBIINNEETT CCOONNSSTTRRUUCCTTIIOONN

All materials are of top quality, assembled to con-form with strict quality-assurance requirements.

The cabinet front and doors are constructed of heavy-gauge polished stainless steel for durability.

All cabinet joints and seams are sealed vapor-tight.

Case is of all metal, welded construction and inter-nally supported and braced for a rigid unit con-struction. Cabinet design eliminated overlapping panels with raw edges. Cabinet body and doors are insulated with non-CFC, foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit.

Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, non-conduc-tive, high-impact thermal breaker strip eliminate condensate build-up on the cabinet front.

Automatic interior lighting is controlled by door openings. Cabinets are equipped with 6 inch adjustable stainless steel legs.

SSHHEELLVVIINNGG

Shelves are designed for heavy-duty use with

.306" diameter frame and brace members and

.140" diameter fill wires spaced 3/4" apart.

Shelves are welded steel and epoxy-coated for a durable, long, rust-free service life.

Adjustments are in 1/2 inch increments and a wide door opening allows the use of a a vari-ety of optional pan and tray slide types.

DDOOOORR CCOONNSSTTRRUUCCTTIIOONN

Door shells are constructed of heavy-gauge stainless steel and are internally braced and urethane-foam-insulated for rigidity. Door cor-ners are of welded construction and polished.

Replaceable snap-in door gaskets are self-adjusting, heavy-duty, magnetic type. Door handles and hinges are chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed alike.

Hinges are cam-action, lift-off type featuring positive safety stop at 120 degrees.

DLREF305

REFRIGERATORS

CHARACTERISTICS Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru

DIMENSIONAL DATA

Net Capacity (cu. ft.) 21 21 50 50 72 72

Width, Overall (in.) 26 26 52 52 78 78

Depth, Overall (Incl. Hdls.) (in.) 351/2 39 351/2 39 351/2 39

Depth (Less Door(s)) (in.) 32 32 32 32 32 32

Depth (Doors(s) Open 90°) (in.) 551/2 79 551/2 79 551/2 79

Clear Door Width (in.) 193/8 193/8 193/8 193/8 193/8 193/8

Clear Full-Door Height (in.) 585/8 585/8 585/8 585/8 585/8 585/8

Clear Half-Door Height (in.) 271/2 271/2 271/2 271/2 271/2 271/2

Height, Overall (Inc. 6" Legs)(in.) 831/4 831/4 831/4 831/4 831/4 831/4

No. of Full Door(s) 1 2 2 4 3 6

No. of Half Door(s) 2 4 4 8 6 12

No. of Shelves 3 3 6 6 9 9

Shelf Area (sq. ft.) 20.4 20.4 40.8 40.8 61.2 61.2

Tray Slide Capacity (Half) 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea.

Tray Slide Capacity (Full) 25 ea. 25 ea. 25 ea. 25 ea 25 ea 25 ea

REFRIGERATION DATA

Condensing Unit Size (H.P.) 1/4

1/4 1/3

1/3 1/2

1/2

Capacity (BTU/hr)** 1940 1940 2560 2560 4010 4010

ELECTRICAL DATA

Cabinet Specifications 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1

Feed Wires (Incl. Ground) 3 3 3 3 3 3

Condensing Unit Specs. 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1

Total Amperes 6.9 7.2 9.1 9.8 12.4 13.4

Cabinet Amperes 1.6 1.9 1.9 2.3 2.9 3.9

Defrost Amperes - - - - - -

Power Supply Cord yes yes yes yes yes yes

SHIPPING DATA

Height – crated (in.) 851/2 851/2 851/2 851/2 851/2 851/2

Width – crated (in.) 315/8 315/8 64 64 90 90

Depth – crated (in.) 42 42 42 42 42 42

Volume – crated (cu.ft.) 65 65 133 133 187 187

Weight Std – crated (lbs.) 320 350 535 595 740 825

Weight SS – crated (lbs.) 380 410 615 675 855 945

Weight Std – uncrated (lbs.) 220 250 365 425 530 620

Weight SS – uncrated (lbs.) 280 310 445 505 645 735

DL1R-SS DL2R-SS DL3R-SS

One Section Two Section Three Section

**Rating @ +25°F Evaporator, 90° Ambient

Note: All Specifications subject to change without notice.

Note: If the cabinet is located directly against a wall and/or under low ceiling, a minimum clearance of 2" is required.

Cabinet upper side panels and refrigeration plug system can be easily removed and reinstalled at installation site where space limitations are confining.

A Division of National Refrigeration & A/C Products, Inc.

539 Dunksferry Road Bensalem, PA 19020

(800) 523-7138 Fax: (215) 244-9579 www.continentalrefrigerator.com

32"

34"

351/2"

52"

831/4"

831/4"

6" Adjustable Legs

6" Adjustable Legs

78"

Digital Thermometer

Digital Thermometer

Digital Thermometer

831/4"

26"

6" Adjustable Legs

MODELS

VC4GS ML-126610

VC4GD ML-126611

VC4GC ML-136494

VC6GS ML-126612

VC6GD ML-126613

VC6GC ML-136495

CATALOG OF

REPLACEMENT PARTS

GAS CONVECTION

OVENS

For additional information on Vulcan-Hart or to locate an authorized parts and service provider in your area, visit our website at www.vulcanhart.com

P.O. BOX 696, LOUISVILLE, KY 40201-0696

TEL. (800) 814-2028

VULCAN-HART

DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC

WWW.VULCANHART.COM FORM 43031 Rev. C (Aug. 2007)

- 2 -

GAS CONVECTION OVENS REPLACEMENT PARTS

OVEN PANELS

23-24-25

27-28

11-12

21-2217 THRU 20

9-10

PL-55991

29 THRU 32

34-35

7-8

- 3 -

OVEN PANELS

ILLUS. PART NO. NAME OF PART AMT.

PL-55991

1 00-424840-00002 Panel – Back (SST) (Optional) 2 00-424153-000G1 Back – Panel Assy 3 00-405016-00001 Cord – Electric Supply (120 V. Only) 4 00-423289-000G1 Motor Mount 5 00-411289-00004 Spacer – Fan Housing 6 SC-120-15 Mach. Screw 1/4-20 x 4 Rd. Hd 7 00-411136-00004 Fan – Cover (60 Hz.)

8 00-411136-00003 Fan – Cover (50 Hz.)

9 00-415780-00003 Wheel – Blower (60 Hz.)

10 00-415780-00005 Wheel – Blower (50 Hz.)

11 WS-029-46 Washer 12 NS-046-86 Nut Assy. 5/16-18 KEPS Hex 13 00-358723-00001 Spacer – Steel 14 SC-113-65 Cap Screw 5/16-18 x 11/4 Hex Hd 15 WS-029-46 Washer 16 FE-002-52 Connector – Conduit 3/8 TS (90 Deg.)

17 FE-006-05 Lock Nut 1/2 18 00-414540-00B35 Conduit 3/8 x 35 Lg 19 00-342285-00001 Bushing – Plastic 20 FE-002-03 Connector – Conduit 3/8 TS Straight 21 00-358516-00001 Motor 1/2 Hp. (2 Speed) (115/50/60/1) 22 00-358516-00002 Motor 1/2 Hp. (2 Speed) (208-240/50/60/1) 23 00-411496-000F1 Switch – Micro 24 NS-038-08 Lock Nut 1/4-20 Hex 25 WS-029-49 Washer 26 00-425324-00001 Bracket – Door Switch 27 00-411265-00011 Rack Assy. (VC4G) ................................................................................................................ AR 28 00-411265-00010 Rack Assy. (VC6G) ................................................................................................................ AR 29 00-357036-00001 Oven Lamp (40 W.) (120-130 V.) (Includes Items 31 & 32) 30 00-357036-00002 Oven Lamp (40 W.) (250 V.) (Includes Items 31 & 32) 31 00-423832-00001 Cover – Light (Metal) 32 00-357036-00003 Lens – Lamp Glass 33 00-417856-00001 Lug – Grounding (With Set Screw) 34 00-424140-00002 Panel – Outer (RH) (SST) (VC4) 35 00-424228-00002 Panel – Outer (RH) (SST) (VC6)

* 36 00-427617-00001 Flue – Deflector Assy

* 37 00-413627-000G1 Tube – Snorkel Assy

* 38 00-402558-00004 Clip – Bulb

* 39 00-346358-00002 Thermostat (High Limit) (With Mounting Plate)

* 40 00-346357-00001 Thermostat (High Limit)

* 41 00-499302-00001 Body Side, Left (VC4) (New Style)

00-424142-00002 Body Side, Left (VC4) (Old Style)

* 42 00-499303-00001 Body Side, Left (VC6) (New Style)

00-424230-00002 Body Side, Left (VC6) (Old Style)

NOTE: * Items Not Shown

- 4 -

DOOR ASSEMBLY

(SIMULTANEOUSLY OPENING DOORS)

1 THRU 4

5-6

8-9

10-11

19 21-22

25-26

28-29

14 THRU 17

PL-55992-1

12-13

- 5 -

DOOR ASSEMBLY

(SIMULTANEOUSLY OPENING DOORS)

ILLUS. PART NO. NAME OF PART AMT.

PL-55992-1

1 00-356562-00001 Handle – Door 2 00-356563-00003 Grip – Front 3 00-356563-00004 Grip – Rear 4 SC-113-98 Mach. Screw 10-24 x 1/2 Hex Washer Hd 5 SC-041-01 Cap Screw 1/4-20 x 3/4 Hex Hd. (SST) 6 WL-019-37 Lockwasher 1/4 Light 7 00-356550-00001 Latch – Friction 8 00-421913-00002 Shell – Outer Door (RH) (W/O Window)

00-421913-00004 Shell – Outer Door (LH) (W/O Window) 9 00-421913-00001 Shell – Outer Door (RH) (W/Window)

00-421913-00003 Shell – Outer Door (LH) (W/Window) 10 00-421904-000G1 Frame Assy. – Door (LH) 11 00-421905-000G1 Frame Assy. – Door (RH) 12 00-424163-00001 Lever – Door Switch 13 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 14 00-499289-000G1 Door Assy. (LH) (W/Window) (Chain Door) (New Style)

00-424730-00001 Door Assy. (LH) (W/Window) (Chain Door) (Old Style) 15 00-499289-000G2 Door Assy. (LH) (W/O Window) (Chain Door) (New Style)

00-424730-00002 Door Assy. (LH) (W/O Window) (Chain Door) (Old Style) 16 00-499290-000G1 Door Assy. (RH) (W/Window) (Chain Door) (New Style)

00-424731-00001 Door Assy. (RH) (W/Window) (Chain Door) (Old Style) 17 00-499290-000G2 Door Assy. (RH) (W/O Window) (Chain Door) (New Style)

00-424731-00002 Door Assy. (RH) (W/O Window) (Chain Door) (Old Style) 18 SD-034-62 Self-Tapping Screw 10-32 x 1/2 Hex Washer Hd., Type T 19 00-358534-00001 Window Assy 20 SD-034-22 Mach. Screw 21 00-358532-00001 Shell – Inner Door (LH & RH) (W/Window) 22 00-358533-00003 Shell – Inner Door (LH & RH) (W/O Window) 23 00-343143-00002 Washer 24 00-347080-00002 Bearing – Door Shaft 25 00-343608-00002 Door Chain & Turnbuckle Assy 26 00-352667-00001 Cable – Door Stop 27 PS-004-11 Spiral Pin 3/16 x 11/4 Heavy 28 00-342166-00001 Sprocket – Door Shaft 29 SC-047-28 Set Screw 1/4-28 x 3/8 Hex Hdls., Cup Pt 30 00-347080-00002 Bearing – Door Shaft 31 SC-022-40 Mach. Screw 1/4-20 x 3/4 Phil. Flat Hd 32 SC-113-90 Mach. Screw 1/4-20 x 3/4 Hex Hd 33 00-499300-000G1 Channel – Door Sill Weldment (Chain) (New Style)

00-357846-00001 Channel – Door Sill Weldment (Old Style) 34 SC-117-73 Screw, Roller Latch, Plate

- 6 -

DOOR ASSEMBLY (LEFT HAND DOOR SHOWN)

(INDEPENDENTLY OPENING DOORS)

PL-55997-1

10-11

12-13

14-15

7-8-9

16 THRU 19

23-24

2-3

Old Style New

Mounted to Upper “C” Channel See Page 16

New

Old Style Shown

Mounted to Door

- 7 -

DOOR ASSEMBLY

(INDEPENDENTLY OPENING DOORS)

ILLUS. PART NO. NAME OF PART AMT.

PL-55997-1

1 00-358728-00001 Handle – End Piece (Prior to November 2005) 2 SC-041-01 Cap Screw 1/4-20 x 3/4 Hex Hd. (SST) (Prior to November 2005) 3 WL-019-37 Lockwasher 1/4 Light (Prior to November 2005) 4 00-357929-00002 Handle – Door (Includes Items 1, 5 & 6) (November 2005 to Present) 5 SC-113-98 Self-Tapping Screw etc 6 00-358728-00001 Handle – End Piece (Prior to November 2005) 7 00-423847-00001 Strike – Door (Old Style) (Mounted to Door)

00-497585-00001 Strike Plate (New Style) (Attaches to Upper “C” Channel Assy.) (See Pg. 16) 8 SC-117-73 Screw, Roller Latch, Plate 9 WL-019-35 Lockwasher

10 00-358600-00001 Shell – Outer Door (LH & RH) (W/Window) 11 00-358600-00002 Shell – Outer Door (LH & RH) (W/O Window) (Not Shown) 12 00-421905-000G1 Frame Assy. – Door (RH) 13 00-421904-000G2 Frame Assy. – Door (LH) 14 00-424163-00001 Lever – Door Switch 15 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 16 00-499285-000G1 Door Assy. (LH) (W/Window) (Independent Doors) (New Style)

00-358529-00005 Door Assy. (LH) (W/Window) (Independent Doors) (Old Style) 17 00-499285-000G2 Door Assy. (LH) (W/O Window) (Independent Doors) (New Style)

00-358529-00006 Door Assy. (LH) (W/O Window) (Independent Doors) (Old Style) 18 00-499286-000G1 Door Assy. (RH) (W/Window) (Independent Doors) (New Style)

00-358530-00003 Door Assy. (RH) (W/Window)(Independent Doors) (Old Style) 19 00-499286-000G2 Door Assy. (RH) (W/O Window) (Independent Doors) (New Style)

00-358530-00004 Door Assy. (RH) (W/O Window) (Independent Doors) (Old Style) 20 SD-034-62 Self-Tapping Screw 10-32 x 1/2 Hex Washer Hd., Type T 21 00-358534-00001 Window Assy 22 SD-034-22 Mach. Screw 23 00-358532-00001 Shell – Inner Door (LH & RH) (W/Window) 24 00-358533-00003 Shell – Inner Door (LH & RH) (W/O Window) (Not Shown) 25 PS-004-11 Spiral Pin 3/16 x 11/4 Heavy 26 00-347080-00002 Bearing – Door Shaft 27 00-343143-00002 Washer 28 00-499263-00001 Door Stop (New Style)

00-424158-00001 Door Stop (Old Style) 29 SC-113-90 Mach. Screw 1/4-20 x 3/4 Hex Hd 30 SC-022-40 Mach. Screw 1/4-20 x 3/4 Phil. Flat Hd 31 00-499262-00001 Channel – Door Sill Weldment (New Style)

00-357846-00001 Channel – Door Sill Weldment (Old Style) 32 00-499264-00001 Cover, Cutout 33 00-497586-00001 Roller Latch (New Style) (Mounted to Top of Doors)

00-347545-00001 Roller Ball Door Latch (Old Style) (Mounted to “C” Channel) 34 00-357837-00001 Door End Seal (LH) 35 SC-113-78 Mach. Screw

00-423848-00001 Shim – Door Strike (Old Style) ................................................................................................ AR

NOTE: When ordering items 10 or 11 for an old style oven, 2 of part 499264-1, 4 of part SC-117-73 and 4 of part WL-019-35 are also needed.

- 8 -

GAS PIPING AND FLAME CHAMBER

- 9 -

GAS PIPING AND FLAME CHAMBER

ILLUS. PART NO. NAME OF PART AMT.

PL-55993-1

1 00-423819-00003 Pipe – Weldment Gas Inlet 2 00-423828-00006 Tube – Flex (30") 3 00-425433-00001 Fan – Clip 4 00-424940-00001 Fan – Cooling (120 V.)

5 00-424940-00002 Fan – Cooling (230 V.)

6 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 7 00-423820-00001 Deflector – Air 8 FP-078-75 Elbow – Street 1/2 x 90 Deg 9 SC-113-80 Cap Screw 1/4-20 x 1/2 Hex Hd

10 00-424728-00002 Bracket – Gas Valve 11 00-497269-00001 Valve – Gas Control (NAT) (White Rogers) (February 2005 to Present)

00-410841-00018 Valve – Gas Control (NAT) (Robert Shaw) (Prior to February 2005) 12 00-497269-00002 Valve – Gas Control (PRO/BUT) (White Rogers) (February 2005 to Present)

00-410841-00019 Valve – Gas Control (PRO/BUT) (Robert Shaw) (Prior to February 2005) 13 SC-117-60 Mach. Screw 10-32 x 11/4 Oval Hd 14 00-423828-00007 Tube – Flex 15 00-424138-00001 Manifold 16 SC-113-80 Cap Screw 1/4-20 x 1/2 Hex Hd 17 00-010901-00030 Orifice – Spud (30 Drill) (NAT) (Sea Level to 2000 Ft.)

18 00-010901-00032 Orifice – Spud (32 Drill) (NAT) (2000 to 2499 Ft.)

19 00-010901-00034 Orifice – Spud (34 Drill) (NAT) (3500 to 4499 Ft.)

20 00-010901-00035 Orifice – Spud (35 Drill) (NAT) (2000 to 4000 Ft.)

21 00-010901-00036 Orifice – Spud (36 Drill) (NAT) (4000 to 8000 Ft.)

22 00-010901-00037 Orifice – Spud (37 Drill) (NAT) (8500 to 10500 Ft.)

23 00-010901-00048 Orifice – Spud (48 Drill) (PRO/BUT) (Sea Level to 2499 Ft.)

24 00-010901-00049 Orifice – Spud (49 Drill) (PRO/BUT) (2500 to 4499 Ft.)

25 00-010901-00050 Orifice – Spud (50 Drill) (PRO/BUT) (4500 to 7499 Ft.)

26 00-010901-00051 Orifice – Spud (51 Drill) (Sea Level to 2000 Ft.)

27 00-417879-00001 Nozzle – Pilot Burner 28 SC-114-27 Mach. Screw 8-32 x 1/2 29 00-424194-00001 Ignitor – Flame Detector 30 00-424135-000G1 Burner Assy. (VC4G) 31 00-424195-000G1 Burner Assy. (VC6G) 32 NS-044-07 Nut Assy. 8-32

00-424191-000G1 Burner Access Cover (Not Shown)

- 10 -

ELECTRICAL COMPONENT PANELS

1-2

9-10

31-32

16-1738-39

21-22

19-20

3-4

PL-55994-1

VC4GD & VC6GD

(W/O ROAST & HOLD)

VC4GC & VC6GC

- 11 -

ELECTRICAL COMPONENT PANEL

ILLUS. PART NO. NAME OF PART AMT.

PL-55994-1

1 00-417934-000G1 Porcelain - Block Assy 2 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 3 00-411500-00012 Transformer (120 V.) (24 V. Output) 4 00-411500-00013 Transformer (208-240 V.) (24 V. Output) 5 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 6 00-423760-00001 Bracket - Ignition Module 7 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 8 00-424137-00002 Control - Spark Ignition (Spark Module) 9 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T

10 NS-044-07 Nut Assy. 8-32 Hex Keps 11 FE-024-23 Bushing - Electrical (Snap) 12 00-417856-00001 Lug - Grounding (With Set Screw) 13 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 14 00-417934-000G1 Porcelain - Block Assy 15 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 16 00-416535-00006 Relay - Heating (120 V.)

17 00-416535-00007 Relay - Heating (200-240 V.)

18 SD-034-49 Self-Tapping Screw 8-32 x 1/2 Hex Washer Hd., Type T 19 00-417934-000G1 Porcelain - Block Assy 20 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 21 00-421758-000G1 Transformer (120 V.) (24 V. Output) 22 00-421758-000G2 Transformer (208-240 V.) (24 V. Output) 23 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 24 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 25 00-821875-00002 Relay - Solid State (50Amp) 26 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 27 00-821875-00002 Relay - Solid State (50Amp) 28 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 29 00-423760-00001 Bracket - Ignition Module 30 00-424137-00002 Control - Spark Ignition (Spark Module) 31 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 32 NS-044-07 Nut Assy. 8-32 Hex Keps 33 FE-024-23 Bushing - Electrical (Snap) 34 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 35 00-417934-000G1 Porcelain - Block Assy 36 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 37 00-417856-00001 Lug - Grounding (With Set Screw) 38 00-416535-00006 Relay - Heating (120 V.)

39 00-416535-00007 Relay - Heating (200-240 V.)

40 SD-034-49 Self-Tapping Screw 8-32 x 1/2 Hex Washer Hd., Type T

00-353589-00001 Probe Temperature (“D” Model) 00-920883-00003 Probe Temperature (ML-126616) (“C” Model) 00-423813-00003 Wire - Ignition (High Voltage) 00-428428-000G1 Sensor Wire

- 12 -

ELECTRICAL COMPONENT PANEL

(W/ROAST & HOLD)

PL-55995

1-2

15-16

18-19

23-24

26-27

3-4

7-8

10-11

- 13 -

ELECTRICAL COMPONENT PANEL

(W/ROAST & HOLD)

ILLUS. PART NO. NAME OF PART AMT.

PL-55995

1 00-417934-000G1 Porcelain – Block Assy 2 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 3 00-421758-000G1 Transformer (120 V.) (24 V. Output) 4 00-421758-000G2 Transformer (208-240 V.) (24 V. Output) 5 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 6 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 7 00-411497-000A1 Relay (1 Pole) (120 V.)

8 00-411497-000A2 Relay (1 Pole) (200 V.)

9 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T

10 00-411497-000A1 Relay (1 Pole) (120 V.)

11 00-411497-000A2 Relay (1 Pole) (200 V.)

12 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 13 00-423760-00001 Bracket – Ignition Module 14 00-424137-00002 Control – Spark Ignition (Spark Module) 15 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 16 NS-044-07 Nut Assy. 8-32 Hex KEPS 17 FE-024-23 Bushing – Electrical (Snap) 18 00-416535-00006 Relay – Heating (120 V.)

19 00-416535-00007 Relay – Heating (200-240 V.)

20 SD-034-49 Self-Tapping Screw 8-32 x 1/2 Hex Washer Hd., Type T 21 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 22 00-417856-00001 Lug – Grounding (With Set Screw) 23 00-417934-000G1 Porcelain – Block Assy 24 SD-034-52 Self-Tapping Screw 8-32 x 1 Hex Washer Hd., Type T 25 SD-034-49 Self-Tapping Screw 8-32 x 1/2 Hex Washer Hd., Type T 26 00-416535-00006 Relay – Heating (120 V.)

27 00-416535-00007 Relay – Heating (200-240 V.)

28 00-424832-00001 Bracket – Mounting 29 00-413764-00001 Thermostat (Roast & Hold) 30 SD-032-07 Self-Tapping Screw 10-24 x 1/2 Hex Washer Hd., Type TT 31 SC-114-83 Mach. Screw 6-32 x 1/4 Pan Hd

00-353589-00001 Probe – Temperature (“D” Model)

- 14 -

CONTROL PANELS

- 15 -

CONTROL PANELS

ILLUS. PART NO. NAME OF PART AMT.

PL-55996-2

1 00-340324-00008 Switch 2 00-354575-00002 Light - Indicator (110-120V.)

3 00-354575-00001 Light Indicator (200-240V.)

4 00-354575-00004 Light - Indicator 5 00-411242-00001 Knob 6 00-353613-00002 Temperature Control Board (ML-126611) (ML-126613) 7 00-411242-00001 Knob 8 00-411690-00003 Timer (120 V.) (60 Hz.) (5 Hr.) (Without Roast & Hold) 9 00-411690-00004 Timer (240 V.) (60 Hz.) (5 Hr.) (Without Roast & Hold)

10 00-411690-00006 Timer (240 V.) (50 Hz.) (5 Hr.) (Without Roast & Hold) 11 00-411242-00001 Knob 12 00-411690-00001 Timer (120 V.) (1 Hr.)

13 00-411690-00002 Timer (240 V.) (1 Hr.) (60 Hz.)

14 00-411690-00003 Timer (120 V.) (60 Hz.) (5 Hr.)

15 00-411690-00004 Timer (240 V.) (60 Hz.) (5 Hr.)

16 00-411690-00005 Timer (240 V.) (1 Hr) (50Hz) 17 00-411690-00006 Timer (240 V.) (50 Hz.) (5 Hr.)

18 00-340324-00009 Switch (D.P.D.T.)

19 00-497280-00001 Overlay - Panel (“D” Model) (1 Hr.) (Without Roast & Hold) 20 00-497284-00001 Overlay - Panel (“D” Model) (5 Hr.)(Without Roast & Hold) 21 00-497285-00001 Overlay - Panel (“D” Model) (1 Hr.) (with Roast & Hold) 22 00-497292-00001 Overlay - Panel (“D” Model) (5 Hr.) (with Roast & Hold) 23 SC-114-82 Mach. Screw 4-40 x 5/16 Rd. Hd 24 WS-028-20 Washer 25 00-411499-00003 Buzzer (230 V.)

26 00-411499-00004 Buzzer (115 V.)

27 00-499296-000G1 Panel - Control Weldment (New Style)

00-424206-000G1 Panel - Control Weldment (Old Style) 28 00-423918-00001 Beeper - Electronic 29 NS-044-05 Nut Assy. 6-32 Hex Keps 30 00-424846-00001 Controller (Watlow #734) (“C” Model) 31 00-354575-00004 Light - Indicator 32 00-358628-00002 Switch - Rocker (2 Position) 33 00-358628-00001 Switch - Rocker (3 Position) 34 00-497506-00001 Overlay - Control Panel (“C” Model) 35 00-499301-000G1 Panel - Control Assy. (“C” Model) (New Style)

00-424842-000G1 Panel - Control Assy. (“C” Model) (Old Style) 36 00-424201-00001 Overlay – Panel (“S” Model) (1 Hr.) (Without Roast & Hold) 37 00-424237-00001 Overlay – Panel (“S” Model) (5 Hr.) (Without Roast & Hold) 38 00-424211-00001 Overlay – Panel (“S” Model) (1 Hr.) (With Roast & Hold) 39 00-424244-00001 Overlay – Panel (“S” Model) (5 Hr.) (With Roast & Hold)

- 16 -

1-2

17-18-19

4 THRU 6

PL-55998-2

13 THRU 16

10-11

New Old

OVEN PANELS

RH CAVITY SIDE

26 - 27 New

OVEN PANELS

ILLUS. PART NO. NAME OF PART AMT.

PL-55998-2

1 00-424141-00002 Top (SST) (VC4) 2 00-424229-00002 Top (SST) (VC6) 3 00-421799-00001 Top – Front 4 00-353484-00001 Plate – Retainer 5 SC-053-46 Mach.