Attachment 2 Specifications AMENDMENT.docx

AMENDMENT 01

COMPUTED RADIOGRAPHY (CR) DIGITAL RADIOGRAPHIC IMAGING SYSTEM

SPECIFICATIONS

All-inclusive table-top, portable, CR digital radiographic imaging system - Computed Radiography Scanner, monitor and software suite:

Multi-imaging plate scan throughput;

Smart erase halogen system;

Positive Air pressured optics drive;

Direct Laser to IP image capture;

25 Micron sampling resolution;

8.0 LP/MM horizontal/vertical spatial resolution or manufacturer’s equivalent (as applicable);

5 megapixel resolution viewing monitor or manufacturer’s equivalent (as applicable);

Quantity 1 - Aerospace Phantom Imaging Plate, or manufacturer’s equivalent (as applicable);

Quantity 1 - Aluminum 2024 RIQI ASTM-E-746 W/Case;

Quantity 1 - Aluminum 2024 Absorber Plate;

Quantity 1 - ASTM-E-747 Aluminum Set B Wire IQI;

Quantity 8 - CSH INDX XL Blue Imaging Plates (8x10”) or manufacturer’s equivalent (as applicable);

Quantity 8 - CSH INDX XL Blue Imaging Plates (5x7”) or manufacturer’s equivalent (as applicable);

Quantity 24 - CSH INDX HR Imaging Plates (14x17”) or manufacturer’s equivalent (as applicable);

Quantity 2 - Rigid Cassette 14x17 No Copper Front or manufacturer’s equivalent (as applicable)

Quantity 1 - Cassette Tool or manufacturer’s equivalent (as applicable)

Quantity 1 - HPX-1plus Diagnostic Tool Checks system parameters or manufacturer’s equivalent (as applicable);

Quantity 1 - On Site Training support or manufacturer’s equivalent (as applicable)

Standard Commercial Warranty (per each system)

Note: the descriptions referenced above may be unique to a specific brand, however each of the approved manufacturers have their own versions of the Computed Radiography (CR) system with corresponding components. Accordingly, and to ensure the compatibility of manufacturers is not compromised, mixing and matching of manufacturer’s equipment/products is prohibited unless stated otherwise by the Technical Order.

This is a Brand Name requirement thus the brand must be clearly stated in the quote submission.