Atch 2 Specifications.docx

FA301620Q0094

RFQ ATTACHMENT 2

COMPUTED RADIOGRAPHY (CR) DIGITAL RADIOGRAPHIC IMAGING SYSTEM

SPECIFICATIONS

All-inclusive table-top, portable, CR digital radiographic imaging system - Computed Radiography

Scanner, monitor and software suite:

Multi-imaging plate scan throughput;

Smart erase halogen system;

Positive Air pressured optics drive;

Direct Laser to IP image capture;

25 Micron sampling resolution;

8.0 LP/MM horizontal/vertical spatial resolution or manufacturer’s equivalent (as applicable);

5 megapixel resolution viewing monitor or manufacturer’s equivalent (as applicable);

01 - Aerospace Phantom Imaging Plate, or manufacturer’s equivalent (as applicable) ;

01 - Aluminum 2024 RIQI ASTM-E-746 W/Case;

01 - Aluminum 2024 Absorber Plate;

01 - ASTM-E-747 Aluminum Set B Wire IQI;

08 - CSH INDX XL Blue Imaging Plates (8x10”) or manufacturer’s equivalent (as applicable);

08 - CSH INDX XL Blue Imaging Plates (5x7”) or manufacturer’s equivalent (as applicable);

24 - CSH INDX HR Imaging Plates (14x17”) or manufacturer’s equivalent (as applicable);

01 - HPX-1plus Diagnostic Tool Checks system parameters or manufacturer’s equivalent (as applicable);

01 - On Site Training support or manufacturer’s equivalent (as applicable)

01 - Standard Commercial Warranty

Note: the descriptions referenced above may be unique to a specific brand, however each of the approved manufacturers have their own versions of the Computed Radiography (CR) system with corresponding components. Accordingly, and to ensure the compatibility of manufacturers is not compromised, mixing and matching of manufacturer’s equipment/products is prohibited unless stated otherwise by the Technical Order.

This is a Brand Name requirement thus the brand must be clearly stated in the quote submission.