Exhibit B Plans~9.pdf

PDF 367 KB Posted

Attached to
Identifier Quarry Chip Rock Production
Solicitation number
S-73000-00017541
Issued by
Oregon

About this file

This is an engineering plan document prepared by the Oregon Department of Transportation (ODOT) for the Wasco County Sherman Highway District in connection with a chip seal rock production project. The document outlines a prospective material source for aggregate production, with ODOT seeking 6,800 cubic yards of graded medium chip aggregate meeting specified grading requirements. The material may be sourced from a commercial supplier or crushed from ODOT-provided material at the designated site, then stockpiled at the location defined in the project specifications. The plan is effective through January 1, 2027, and includes detailed site mapping with drill hole locations, excavation boundaries, work area limits, access roads, and existing stockpile areas identified on Sherman Highway (Route 042) near Madras, Oregon. The prospective material source is designated as OR-33-053-4 with DOGAMI number 33-0024, located on specific tax lot parcels in Section 6, Township 7 South, Range 16 East.

The engineering plan, certified by Oregon Registered Geologist Scott D. Billings, provides technical specifications including contour intervals of two feet, elevation data referenced to the North American Vertical Datum 1988 (NAVD88), and cross-sectional details documented on supplemental sheets GE02. The plan incorporates existing infrastructure such as fence lines, safety berms, and access roads, with provisions for reconstruction or relocation as needed. Drill hole data referenced in the material source narrative provides subsurface information for engineering evaluation. The document is drawn to a scale of 1 inch equals 100 feet and includes a comprehensive legend identifying proposed features, excavation boundaries, ODOT property limits, work area boundaries, and underground fiber-optic line locations. This plan serves as the technical basis for the aggregate procurement project and establishes the site parameters for contractor operations.

View the file

Other files

File Type Posted
00017541 Sample Contract gts.docx DOCX document
00017541 Bid Cover Sheet.docx DOCX document
00017541 Invitation To Bid gts.docx DOCX document
Exhibit E Material Source Narrative~6.pdf PDF
Exhibit A Specifications~4.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

N

IDENTIFIER QUARRY

2026_RockProd_GE01.dgn :: Default 12/2/2025 10:25:30 AM hwye43o 1"=100' Scale:

SCALE WARNING

drawing is not to scale measure one inch then

If scale bar doesn't

Scale:1"=100'

PLAN

LEGEND

A

A

B

B

= Proposed Access Road

= Safety Berm

= Edge of Water

= Existing Stockpile

= Excavation Boundary

= ODOT Property Boundary

= ODOT Work Area Boundary

Scale (ft.)

25 0 50 100

To Madras US97 Sherman Highway (#042) To Shaniko

A c c e s s R o a d

W o rk A re a B o u n d a ry

W ater

Interm ittent

Scalpings

Fines

Reject

Work Area Boundary

Bench Access Road

W o rk A re a B o u n d a ry

ODOT Property Boundary

For "Section A-A" and "Section B-B", see sheet "GE02".1.

NOTES:

and are for reference only.

Elevations shown are based on North American Vertical Datum 1988 (NAVD88),2.

RWIS

Area

Processing

= Underground Fiber-Optic Line

GE01

Stockpile

Existing

Tax Lot #1300 Sec. 6, T. 7 S., R. 16 E., W.M.4

NE2

Sec. 5 & S4

NW4

SW2

SW

SHERMAN HWY. (#042), M.P. 61.74

SOURCE # OR-33-053-4 DOGAMI # 33-0024

= Drill Hole

= Existing Fence

PROSPECTIVE MATERIAL SOURCE

DH17-01

DH17-03

DH17-04

DH17-02

Area

Excavation

Contour interval is 2 feet.3.

remove if needed

Existing Fence, reconstruct/relocate if needed

Existing Saftey Berm, = Existing Access Road

Stockpile

Proposed Aggregate

Stockpile

Existing

= Proposed Stockpile

For Drill Hole Logs, see Material Source Narrative.4.

Access Road

Construct Bench

EXPIRES: 01-01-2027

C RETIIFED

OREGON

SCOTT D. BILLINGS

E N

GINEERING GEOLO

G

STI

E1538 size

Over-

OF TRANSPORTATION

OREGON DEPARTMENT

Checker:Drafter:

Designer:

SHEET NO.

Reviewer:

AVAILABLE UPON REQUEST

FINAL ELECTRONIC DOCUMENT

WASCO COUNTY

SHERMAN HIGHWAY

DISTRICT 9 CHIP SEAL

F O

T N

E

MTRAPED

N

O G

E R

O

N

OI

T

ATROPS

N A

R T

Russell G. Frost

N/A

Scott D. Billings

Scott D. Billings

2025-12-02T10:29:28-0800
BILLINGS Scott D

File details come from the government source that posted it. Updated .