EXHIBIT A.1 - TECHNICAL SPECIFICATIONS.pdf
PDF 392 KB Posted
- Attached to
- ADAS Calibration and Wheel Alignment System
- Solicitation number
- OP143228
- Issued by
- California
About this file
This is a Technical Specifications document (Exhibit A.1) for Invitation for Bid (IFB) No. OP143228 issued by the Los Angeles County Metropolitan Transportation Authority (LACMTA) for an ADAS Calibration and Wheel Alignment System, specification number MA-26-09, dated May 19, 2026. The procurement requests a complete integrated system consisting of a Hunter Ultimate ADAS System (or approved equal) with a minimum 32-inch monitor, universal and OEM calibration targets compatible with Ford, Lincoln, Toyota, Lexus, General Motors, and Subaru platforms, and a Hunter RX16K Alignment Rack (or approved equal) with minimum 16,000 lb lifting capacity, extended wheelbase capability of 195 inches, and integrated components including swing jacks, stainless steel turnplates, inflation station, and PowerSlide movable turnplate system. The contractor must provide complete delivery, installation, setup, calibration, startup, and commissioning within 150 days of the contract effective date, with requested installation completion following the contractor's proposed schedule. The system must be suitable for servicing light-duty and medium-duty fleet vehicles and must comply with all applicable OSHA and California safety regulations.
The specification requires the contractor to provide comprehensive training consisting of a minimum of two five-day courses (or equivalent) accommodating at least six Metro personnel per session, covering alignment measurements, ADAS calibration procedures, software operation, maintenance, and troubleshooting, along with training materials and certificates. All software licenses and updates required for system operation must be included, with the contractor required to identify all software subscription, update, and recurring support costs separately. The integrated system and accessories must include a minimum one-year warranty from acceptance or manufacturer's standard warranty, whichever is greater, with replacement parts and technical support available for a minimum of five years post-delivery. Contractors must submit complete operator manuals, three sets each of maintenance and electrical schematics, software documentation, and installation layout drawings with utility requirements prior to delivery. All training costs must be listed separately in the bid price, and Metro will be responsible for facility utility connections, compressed air, concrete work, and site preparation unless otherwise identified by the contractor.
View the file
Other files
Show all 34
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EXHIBIT A.1 – TECHNICAL REQUIREMENTS
IFB NO. OP143228
ADAS Calibration and Wheel Alignment System Specification Number MA-26-09
May 19, 2026
Bidder Name: ____________________________ Specification No: MA-26-09
TECHNICAL REQUIREMENTS
ADAS CALIBRATION AND WHEEL ALIGNMENT SYSTEM
Instructions for completing this form.
A. State your company name in the “Bidder” field above.
B. Submit your Bid with column “C” COMPLETELY FILLED OUT. In order to be considered responsive to the technical requirements, Bidder must respond to ALL specified line items highlighted in yellow below by stating “In compliance”. For minimum or maximum value requirements, indicate value offered. “In compliance” shall be part of your response, for example:
C. PLEASE REFER TO LOI-10 FOR DETAILS RELATED TO THE APPROVED EQUALS
(GOODS) PROCESS. BIDDERS SEEKING LACMTA’S AUTHORIZATION FOR
SUBSTITUTION OF GOODS OR PROCESSES, INCLUDING THE SPECIFICATIONS BELOW,
MUST SUBMIT A WRITTEN REQUEST FOR AN “OR EQUAL” SUBSTITUTION TOGETHER
WITH DATA SUBSTANTIATING THE BIDDER’S REPRESENTATION THAT THE NON-
SPECIFIED ITEM IS OF EQUAL QUALITY TO THE ITEM SPECIFIED.
D. By submitting your Bid, you agree to supply an item(s) in full compliance with this specification.
DO NOT modify columns A and B as it may render your Bid to be non-responsive. PLEASE
REFER TO THE IFB DOCUMENT LOI-10 APPROVED EQUALS (GOODS) AND LOI-14
CRITICAL DATES FOR ADDITIONAL DETAILS AND DEADLINE TO SUBMIT REQUESTS
FOR APPROVED EQUALS.
Manufacturer / Model
HUNTER ULTIMATE ADAS
SYSTEM, OR APPROVED
EQUAL.
In Compliance, Hunter Ultimate ADAS System
Capacity Minimum 16,000 lb lifting capacity.
In Compliance, 16,000 lb lifting capacity
1.0 ADAS Calibration System Requirements
A
B C
Please Complete This Column
1.1 Manufacturer/Model HUNTER ULTIMATE ADAS SYSTEM, OR
APPROVED EQUAL.
PLEASE STATE MAKE, MODEL AND MODEL
YEAR OFFERED.
1.2 Description Advanced Driver Assistance System (ADAS)
calibration system.
1.3 Monitor System shall include minimum 32-inch monitor.
1.4 Sensors System shall include all sensors required for
calibration operations.
1.5 Cabinet System shall include storage cabinet for calibration components and accessories.
1.6 Universal Targets System shall include universal calibration targets.
ADAS Calibration and Wheel Alignment System Specification Number MA-26-09
1.7 OEM Target
Compatibility
System shall support OEM calibration procedures for Ford, Lincoln, Toyota, Lexus, General Motors vehicle platforms, Subaru, and equivalent OEM vehicle platforms.
1.8 Calibration
Accessories
System shall include all required target stands, magnetic targets, mounting hardware, placement aids, and accessories required for calibration operations.
1.9 Calibration Software System shall include OEM-compatible calibration software and interface capability comparable to Hunter ADASLink or approved equal.
1.10 Camera Calibration System shall support camera-based ADAS calibration functions.
1.11 Surround View
Calibration
System shall support surround-view camera calibration capability.
1.12
Forward Facing Calibration
System shall support forward-facing target calibration capability.
1.13
OEM Procedures System shall support OEM-compatible calibration procedures.
2.0 Alignment Rack and Lift Requirements
2.1
Manufacturer / Model HUNTER RX16K ALIGNMENT RACK, OR
APPROVED EQUAL.
PLEASE STATE MAKE, MODEL AND MODEL
YEAR OFFERED.
2.2
Alignment Rack Type Heavy-duty flush-mount wheel alignment rack.
2.3 Capacity Minimum 16,000 lb lifting capacity.
2.4
Configuration Rack shall be extended-length configuration suitable for long wheelbase fleet vehicles.
2.5 Wheelbase Rack shall support minimum 195-inch wheelbase
capability.
2.6 Swing Jacks Provide two (2) minimum 9,000 lb capacity swing jacks.
2.7 Turnplates Rack shall include stainless steel turnplates and slip plate tops.
2.8 Inflation Station Rack shall include integrated inflation station.
2.9 PowerSlide Rack shall include PowerSlide or approved equal movable turnplate/slip plate system.
2.10 Approach Ramps Provide extended approach ramps minimum 50 inches long.
2.11 Surface Mount
Compatibility
Rack shall support surface-mount applications.
2.12 Sensor Extensions Provide sensor extension kit compatible with alignment system.
2.13 Rack Lighting Provide integrated rack lighting kit.
2.14 Lift Safety Systems Alignment rack and lifting equipment shall include
ADAS Calibration and Wheel Alignment System Specification Number MA-26-09 all manufacturer-standard safety locking devices, overload protection systems, and emergency stop features.
3.0 General Requirements
3.1
Compatibility System shall be suitable for servicing light-duty and medium-duty fleet vehicles including utility trucks, pickup trucks, SUVs, utility vans, and similar fleet vehicles.
3.2
Installation Contractor shall provide complete delivery, installation, setup, calibration, startup, and commissioning of all equipment.
3.3 Operational
Readiness
System shall be fully operational upon completion of installation and acceptance by Metro.
3.4 Safety Compliance Equipment shall comply with all applicable OSHA and California safety regulations.
3.5 Software Licensing All software licenses required for operation of the system shall be included.
3.6 Software Updates Contractor shall state all software subscription requirements, update requirements, and recurring support costs associated with the proposed system.
3.7
Wireless Connectivity System shall include wireless connectivity capability for alignment and calibration equipment.
3.8 Facility Preparation Metro will be responsible for facility utility connections, compressed air connections, concrete work, and site preparation unless otherwise identified by Contractor in the bid submission.
Contractor shall provide electrical power requirements, utility requirements, and compressed air requirements prior to delivery.
4.0 Training Requirements
4.1
Training Contractor shall provide complete operator and maintenance training.
Two (2) Minimum five-day training courses or equivalent.
Training shall accommodate a minimum of six (6) Metro personnel in each session.
Please provide training durations offered.
4.2
Content Training shall include alignment measurements, alignment adjustments, ADAS calibration procedures, software operation, maintenance, and troubleshooting.
ADAS Calibration and Wheel Alignment System Specification Number MA-26-09
4.3 Materials Training materials and documentation shall be
included.
4.4
Certificates Training certificates shall be provided for all attending Metro personnel.
4.5 Training Cost All training costs shall be listed separately in the bid price.
5.0 Warranty Requirements
5.1 Integrated system and all accessories shall be free from defects in design, materials, and workmanship for a minimum period of one (1) year from acceptance by Metro, or manufacturer’s standard warranty, whichever is greater.
Please state the warranty terms offered.
5.2 Replacement parts and technical support shall remain available for minimum five (5) years after delivery.
6.0 Instruction & Parts Manuals
The following manuals and schematics shall be furnished at the pre-delivery inspection. If unable to provide any or all of the following manuals and schematics at the pre-delivery inspection, please submit, in writing, to the designated METRO Contract Administrator the reason for non-compliance with this specification requirement and provide a specific date that the manuals and schematics will be delivered to the METRO.
6.1 One (1) complete copy of the operator’s manual for each unit and any optional items or accessories specified.
6.2 Three (3) complete sets of the maintenance, repair, and parts manuals and for any optional items or accessories specified. Digital versions of OEM manual are acceptable.
6.3 Three (3) complete sets of electrical schematics and for any optional items or accessories specified, unless said schematics are already included in the maintenance, repair and parts manuals. Digital versions of OEM manual are acceptable.
6.4 Contractor shall provide software documentation and licensing information.
6.5 Contractor shall provide installation layout drawings and utility requirement documentation prior to delivery.
7.0 Delivery, Installation and Acceptance
7.1 Requested delivery is within 150 days of Contract effective date. Contractor shall state delivery timeline.
7.2 Installation shall be performed in accordance with manufacturer recommendations and industry-standard workmanship practices.
Contractor shall complete installation, setup, and commissioning within contractor’s proposed schedule after delivery.
Please state installation timeline.
ADAS Calibration and Wheel Alignment System Specification Number MA-26-09
7.3 Contractor shall demonstrate proper operation of the alignment rack, lift functions, calibration system, software, and accessories during Metro acceptance inspection.
File details come from the government source that posted it. Updated .