J.2_Attachment_Test_Data_Summary.xlsx

Sheet1 Attachment 2 - Summary of Test Data for Dynamic Tests

Test Lab Sled Test Date Sled Test No. Lab Report Number DOT Report Number (NHTSA to provide) HS Number (NHTSA to provide) CRS Mfr CRS Brand CRS Model CRS Model No. CRS Category CRS Date of Mfr Dummy Type Dummy Serial Number Dummy Mfr Dummy, Last Cal Date CRS Installed Direction Base Used (Y,N, N/A) Method of CRS Attachment to Bench Tether Usage (Y,N) CRS Back Position CRS Position on Bench (Center, Outboard) Harness Slot (# from top) Crotch Strap Slot (# from front edge) Technician Dummy Cal Technician CRS Test Set Up

Foam- Bottom, 2" 25% IFD Foam- Bottom, 2" 65%/25% IFD Foam- Bottom, 4" 25% IFD Foam- Bottom, 4" 65%/25% IFD Foam- Back, 2" 25% IFD Foam- Back, 2" 65%/25% IFD Foam- Back, 4" 25% IFD Foam- Back, 4" 65%/25% IFD Dummy Chin-Chest or Other Contact? Belt Tension (lb)- lap belt Belt Tension (lb)- shoulder (Type II only) Lower Anchor (LATCH) Tension (lb) Tether Belt Tension (lb) Ambient Temp on Test Date (deg C) Ambient Relative Humidity on Test Date (%) Sled Velocity (mph) Sled Peak Acc (g) Time of Peak Acc (ms) Structural Integ. (P/F) Change in Adjustment Pos? Y/N Exposed Openings? Y/N Back Surface/Seating Surface Angle HIC 36 3 ms clip (g) Duration exceed 60g (ms) Test Artifacts

Torso Retention Head Exc (mm) Knee Exc (mm) Head Torso Angle Back Support angle (Deg) - CRS rear facing only

Sheet2

Sheet3