A001_Spruce.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

N/A

PAGE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

A001 07/19/2016 N/A WA NPS OLYM 2015(4), Spruce Railroad Trail Segment C

6. ISSUED BY CODE N/A 7. ADMINISTERED BY (If other than Item 6) CODE N/A

Department of Transportation Federal Highway Administration 610 East Fifth Street Vancouver WA 98661-3801

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and Zip Code) 9A. AMENDMENT OF SOLICITATION NO.

X

DTFH70-16-B-00011

9B. DATED (SEE ITEM 11)

07/01/2016

10A. MODIFICATION OF CONTRACT/ORDER NO.

N/A

10B. DATED (SEE ITEM 13)

CODE: N/A FACILITY CODE: N/A

N/A

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

| X | The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

(__ ) is extended, ( x ) is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A THIS CHANGE ORDER IS ISSUED PURSUANT TO (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN

ITEM 10A.

N/A

B THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D OTHER (Specify type of modification and authority)

N/A

E. IMPORTANT: Contractor n/a is not, n/a is required to sign this document and return n/a copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

WA NPS OLYM 2015(4), Spruce Railroad Trail Segment C

See page 2 for revisions.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15a. NAME AND TITLE OF SIGNER (Type or print) 15a. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

N/A

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY_________________________________________ BY N/A___________________________ N/A (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION NOT USABLE

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment No. A001, dated 7/19/16 WA NPS OLYM 2015(4) Solicitation No. DTFH70-16-B-00011 Spruce Railroad Trail Segment C

REVISIONS ARE AS FOLLOWS:

SOLICITATION PROVISION

Revises FAR Provision 52.204-16, Commercial and Government Entity Code Reporting, Page B-4 through B-5

CONTRACT CLAUSES

SOLICITATION CLAUSE

Revises FAR Clause 52.204-18, Commercial and Government Entity Code Maintenance , Page C-12 through C-13

MINIMUM WAGE SCHEDULE

Updates page D-1 through D-48, Davis-Bacon General Wage Decision Number WA160001 to current effective date of 07/15/2016.

SPECIAL CONTRACT REQUIREMENTS

Page Section/Table Revision E-4 104.05 Load Restrictions Adds paragraph E-14 107.10(e) Other Requirements Revises #(10)

PLANS

Plan sheet #D.10 Adds sheet

Plan sheet #D.11 Adds sheet

ENCLOSURES

Pages:

B-4 and B-5 C-12 and C-13 D-1 through D-48 E-4 E-14

Plan Sheets:

D.10 through D.11

Notice to Bidders: Please submit revised page B-4 with your bid.

B-4

Solicitation Provisions Project: WA NPS OLYM 2015(4), Spruce Railroad Trail Segment C

(d) The offeror has completed the annual representations and certifications electronically via the SAM Web site accessed through https://www.acquisition.gov . After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201);

except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Far Clause # Title Date Change 52.219-1 Small Business Program Representations ___________ Under NAICS Code 237310 the offeror represents as part of its offer that it (__) is, (__) is not a small business.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

52.204-16 Commercial and Government Entity Code Reporting (Jul 2016)

(a) Definition. As used in this provision— “Commercial and Government Entity (CAGE) code means--

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense

Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

(b) The Offeror shall enter its CAGE code in its offer with its name and address or otherwise include it prominently in its proposal. The CAGE code entered must be for that name and address. Enter “CAGE” before the number. The CAGE code is required prior to award.

(c) CAGE codes may be obtained via –

(1) Registration in the system for Award management (SAM) at www.sam.gov. If the Offeror is located in the United States or its outlying areas and does not already have a CAGE code assigned, the DLA Commercial and Government Entity (CAGE) Branch will assign a CAGE code as a part of the SAM registration process. SAM registrants located outside the United States and its outlying areas shall obtain a NCAGE code prior to registration in SAM (see paragraph (c)(3) of this provision).

(2) The DLA Commercial and Government Entity (CAGE) Branch. If registration in SAM is not required for the subject procurement, and the offeror does not otherwise register in SAM, an offeror located in the United States or its outlying areas may request that a CAGE code be assigned by submitting a request at https://cage.dla.mil.

(3) The appropriate country codification bureau. Entities located outside the United States and its outlying areas may obtain an NCAGE code by contacting the Codification Bureau in the foreign entity’s country if that country is a member of NATO or a sponsored nation. NCAGE codes may be obtained from the NSPA at https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx if the foreign entity’s

B-5

Solicitation Provisions country is not a member of NATO or a sponsored nation. Points of contact for codification bureaus, as well as additional information on obtaining NCAGE codes, are available at http://www.nato.int/structur/AC/135/main/links/contacts.htm.

(d) Additional guidance for establishing and maintaining CAGE codes is available at https://www.cage.dla.mil.

(e) When a CAGE Code is required for the immediate owner and/or the highest-level owner by 52.204-17 or 52.212-3(p), the Offeror shall obtain the respective CAGE Code from that entity to supply the CAGE Code to the Government.

(f) Do not delay submission of the offer pending receipt of a CAGE code.

Revised by A001 52.209-7 Information Regarding Responsibility Matters (Jul 2013)

(a) Definitions. As used in this provision— “Administrative proceeding” means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability (e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceedings at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables.

“Federal contracts and grants with total value greater than $10,000,000” means—

(1) The total value of all current, active contracts and grants, including all priced options; and

(2) The total value of all current, active orders including all priced options under indefinite delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules).

“Principal” means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions).

(b) The offeror [__] has [__] does not have current active Federal contracts and grants with total value greater than $10,000,000.

(c) If the offeror checked “has” in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information:

(1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions:

(i) In a criminal proceeding, a conviction.

(ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more.

(iii) In an administrative proceeding, a finding of fault and liability that results in—

(A) The payment of a monetary fine or penalty of $5,000 or more; or

(B) The payment of a reimbursement, restitution, or damages in excess of $100,000.

(iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision.

(2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence.

C-12

Contract Clauses

52.204–14 Service Contract Reporting Requirements (Jan 2014)

(a) Definition. First-tier subcontract means a subcontract awarded directly by the Contractor for the purpose of acquiring supplies or services (including construction) for performance of a prime contract. It does not include the Contractor’s supplier agreements with vendors, such as long-term arrangements for materials or supplies that benefit multiple contracts and/or the costs of which are normally applied to a Contractor’s general and administrative expenses or indirect costs.

(b) The Contractor shall report, in accordance with paragraphs (c) and (d) of this clause, annually by October 31, for services performed under this contract during the preceding Government fiscal year (October 1–September 30).

(c) The Contractor shall report the following information:

(1) Contract number and, as applicable, order number.

(2) The total dollar amount invoiced for services performed during the previous Government fiscal year under the contract.

(3) The number of Contractor direct labor hours expended on the services performed during the previous Government fiscal year.

(4) Data reported by subcontractors under paragraph (f) of this clause.

(d) The information required in paragraph (c) of this clause shall be submitted via the internet at www.sam.gov. (See SAM User Guide). If the Contractor fails to submit the report in a timely manner, the contracting officer will exercise appropriate contractual remedies. In addition, the Contracting Officer will make the Contractor’s failure to comply with the reporting requirements a part of the Contractor’s performance information under FAR subpart 42.15.

(e) Agencies will review Contractor reported information for reasonableness and consistency with available contract information. In the event the agency believes that revisions to the Contractor reported information are warranted, the agency will notify the Contractor no later than November 15. By November 30, the Contractor shall revise the report, or document its rationale for the agency.

(f)

(1) The Contractor shall require each first-tier subcontractor providing services under this contract, with subcontract(s) each valued at or above the thresholds set forth in 4.1703(a)(2), to provide the following detailed information to the Contractor in sufficient time to submit the report:

(i) Subcontract number (including subcontractor name and DUNS number); and

(ii) The number of first-tier subcontractor direct-labor hours expended on the services performed during the previous Government fiscal year.

(2) The Contractor shall advise the subcontractor that the information will be made available to the public as required by section 743 of Division C of the Consolidated Appropriations Act, 2010.

52.204–18 Commercial and Government Entity Code Maintenance (Jul 2016)

(a) Definition. As used in this clause— “Commercial and government Entity (CAGE) code” means—

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or Government entity, or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as the NATO CAGE (NCAGE) code.

(b) Contractors shall ensure that the CAGE code is maintained throughout the life of the contract. For contractors registered in the System for Award Management (SAM), the DLA Commercial and Government Entity (CAGE) Branch shall only modify data received from SAM in the CAGE master file if the contractor initiates those changes via update of its SAM registration. Contractors undergoing a novation or change-of-name agreement shall notify the contracting officer in accordance with subpart

C-13

Contract Clauses

42.12. The contractor shall communicate any change to the CAGE code to the contracting officer within 30 days after the change, so that a modification can be issued to update the CAGE code on the contract.

(c) Contractors located in the United States or its outlying areas that are not registered in SAM shall submit written change requests to the DLA Commercial and Government Entity (CAGE) Branch.

Requests for changes shall be provided at https://cage.dla.mil . Change requests to the CAGE master file are accepted from the entity identified by the code.

(d) Contractors located outside the United States and its outlying areas that are not registered in SAM shall contact the appropriate National Codification Bureau (points of contact available at https://www.nato.int/structur/AC/135/main/links/contacts.htm) or NSPA at https://eportal.nspa.nato.int/AC/135/Public/scage/CageLi.

(e) Additional guidance for maintaining CAGE codes is available at https://cage.dla.mil.

Revised by A001 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014)

The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015)

(a) Definition. Commercially available off the-shelf (COTS) item, as used in this clause—

(1) Means any item of supply (including construction material) that is—

(i) A commercial item (as defined in paragraph (1) of the definition in FAR 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

(b) The Government suspends or debars Contractors to protect the Government’s interests. Other than a subcontract for a commercially available off-the-shelf item, the Contractor shall not enter into any subcontract, in excess of $35,000 with a Contractor that is debarred, suspended, or proposed for debarment by any executive agency unless there is a compelling reason to do so.

(c) The Contractor shall require each proposed subcontractor whose subcontract will exceed $35,000, other than a subcontractor providing a commercially available off-the-shelf item, to disclose to the Contractor, in writing, whether as of the time of award of the subcontract, the subcontractor, or its principals, is or is not debarred, suspended, or proposed for debarment by the Federal Government.

(d) A corporate officer or a designee of the Contractor shall notify the Contracting Officer, in writing, before entering into a subcontract with a party (other than a subcontractor providing a commercially available off-the-shelf item) that is debarred, suspended, or proposed for debarment (see FAR 9.404 for information on the System for Award Management (SAM) Exclusions). The notice must include the following:

(1) The name of the subcontractor.

(2) The Contractor’s knowledge of the reasons for the subcontractor being listed with an exclusion in SAM.

(3) The compelling reason(s) for doing business with the subcontractor notwithstanding its being listed with an exclusion in SAM.

(4) The systems and procedures the Contractor has established to ensure that it is fully protecting the Government’s interests when dealing with such subcontractor in view of the specific basis for the party’s debarment, suspension, or proposed debarment

D - 1

General Wage Decision WA NPS OLYM 2015(4), Spruce Railroad Trail Segment C Revised by Amendment A001

General Decision Number: WA160001 07/15/2016 WA1

Superseded General Decision Number: WA20150001

State: Washington

Construction Type: Highway

Counties: Washington Statewide.

HIGHWAY (Excludes D.O.E. Hanford Site in Benton and Franklin Counties)

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Davis‐Bacon Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/08/2016 1 02/19/2016 2 02/26/2016 3 03/04/2016 4 04/22/2016 5 05/20/2016 6 06/03/2016 7 06/24/2016 8 07/08/2016 9 07/15/2016

CARP0001‐008 06/01/2015

Rates Fringes

CARPENTER

GROUP 1.....................$ 27.61 14.00

GROUP 2.....................$ 41.86 14.49

GROUP 3.....................$ 32.97 14.00

GROUP 4.....................$ 31.94 14.00

D - 2

GROUP 5.....................$ 73.44 14.00

GROUP 6.....................$ 35.02 14.00

GROUP 7.....................$ 36.72 14.00

GROUP 8.....................$ 33.27 14.00

GROUP 9.....................$ 35.02 14.00

CARPENTER & DIVER CLASSIFICATIONS:

GROUP 1: Carpenter

GROUP 2: Millwright, machine erector

GROUP 3: Piledriver ‐ includes driving, pulling, cutting, placing collars, setting, welding, or creosote treated material, on all piling

GROUP 4: Bridge carpenters

GROUP 5: Diver Wet

GROUP 6: Diver Tender, Manifold Operator, ROV Operator

GROUP 7: Diver Standby, Bell/Vehicle or Submersible operator Not Under Pressure

GROUP 8: Assistant Tender, ROV Tender/Technician

GROUP 9: Manifold Operator‐Mixed Gas

ZONE PAY:

ZONE 1 0‐40 MILES FREE

ZONE 2 41‐65 MILES $2.25/PER HOUR

ZONE 3 66‐100 MILES $3.25/PER HOUR

ZONE 4 OVER 100 MILES $4.75/PER HOUR

DISPATCH POINTS:

CARPENTERS/MILLWRIGHTS: PASCO (515 N Neel Street) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS/PILEDRIVER: SPOKANE (127 E. AUGUSTA AVE.) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: WENATCHEE (27 N. CHELAN) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

D - 3

CARPENTERS: COEUR D' ALENE (1839 N. GOVERNMENT WAY) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: MOSCOW (302 N. JACKSON) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

DEPTH PAY FOR DIVERS BELOW WATER SURFACE:

50‐100 feet $2.00 per foot 101‐150 feet $3.00 per foot 151‐220 feet $4.00 per foot 221 feet and deeper $5.00 per foot

PREMIUM PAY FOR DIVING IN ENCLOSURES WITH NO VERTICAL ASCENT:

0‐25 feet Free 26‐300 feet $1.00 per Foot

SATURATION DIVING:

The standby rate applies until saturation starts. The saturation diving rate applies when divers are under pressure continuously until work task and decompression are complete. the diver rate shall be paid for all saturation hours.

WORK IN COMBINATION OF CLASSIFICATIONS:

Employees working in any combination of classifications within the diving crew (except dive supervisor) in a shift are paid in the classification with the highest rate for that shift.

HAZMAT PROJECTS:

Anyone working on a HAZMAT job (task), where HAZMAT certification is required, shall be compensated at a premium, in addition to the classification working in as follows:

LEVEL D + $.25 per hour ‐ This is the lowest level of protection. No respirator is used and skin protection is minimal.

LEVEL C + $.50 per hour ‐ This level uses an air purifying respirator or additional protective clothing.

LEVEL B + $.75 per hour ‐ Uses same respirator protection as Level A. Supplied air line is provided in conjunction with

D - 4 a chemical "splash suit".

LEVEL A +$1.00 per hour ‐ This level utilizes a fully encapsulated suit with a self‐contained breathing apparatus or a supplied air line.

CARP0003‐006 10/01/2011

SOUTHWEST WASHINGTON: CLARK, COWLITZ, KLICKITAT,

LEWIS(Piledriver only), PACIFIC (South of a straight line made by extending the north boundary line of Wahkiakum County west to Willapa Bay to the Pacific Ocean), SKAMANIA AND WAHKIAKUM COUNTIES and INCLUDES THE ENTIRE PENINSULA WEST OF WILLAPA BAY

SEE ZONE DESCRIPTION FOR CITIES BASE POINTS

ZONE 1:

Rates Fringes

Carpenters:

CARPENTERS..................$ 32.04 14.18

DIVERS TENDERS..............$ 36.34 14.18

DIVERS......................$ 77.08 14.18

DRYWALL.....................$ 27.56 14.18

MILLWRIGHTS.................$ 32.19 14.18

PILEDRIVERS.................$ 33.04 14.18

DEPTH PAY:

50 TO 100 FEET $1.00 PER FOOT OVER 50 FEET

101 TO 150 FEET $1.50 PER FOOT OVER 101 FEET

151 TO 200 FEET $2.00 PER FOOT OVER 151 FEET

Zone Differential (Add up Zone 1 rates):

Zone 2 ‐ $0.85 Zone 3 ‐ 1.25 Zone 4 ‐ 1.70 Zone 5 ‐ 2.00 Zone 6 ‐ 3.00

BASEPOINTS: ASTORIA, LONGVIEW, PORTLAND, THE DALLES, AND

VANCOUVER, (NOTE: All dispatches for Washington State Counties: Cowlitz, Wahkiakum and Pacific shall be from Longview Local #1707 and mileage shall be computed from that point.)

D - 5

ZONE 1: Projects located within 30 miles of the respective city hall of the above mentioned cities ZONE 2: Projects located more than 30 miles and less than 40 miles of the respective city of the above mentioned cities ZONE 3: Projects located more than 40 miles and less than 50 miles of the respective city of the above mentioned cities ZONE 4: Projects located more than 50 miles and less than 60 miles of the respective city of the above mentioned cities.

ZONE 5: Projects located more than 60 miles and less than 70 miles of the respective city of the above mentioned cities ZONE 6: Projects located more than 70 miles of the respected city of the above mentioned cities

CARP0770‐003 06/01/2015

Rates Fringes

CARPENTER

CENTRAL WASHINGTON:

CHELAN, DOUGLAS (WEST OF

THE 120TH MERIDIAN),

KITTITAS, OKANOGAN (WEST

OF THE 120TH MERIDIAN) AND

YAKIMA COUNTIES

CARPENTERS ON CREOSOTE

MATERIAL...................$ 40.46 13.66

CARPENTERS.................$ 40.36 13.66

DIVERS TENDER..............$ 35.02 14.00

DIVERS.....................$ 73.44 14.00

MILLWRIGHT AND MACHINE

ERECTORS...................$ 41.86 13.66

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING.......$ 40.61 13.66

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON ‐ ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima

D - 6

Aberdeen‐Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 ‐25 radius miles Free 26‐35 radius miles $1.00/hour 36‐45 radius miles $1.15/hour 46‐55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON ‐ MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 ‐25 radius miles Free 26‐45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

CARP0770‐006 06/01/2015

Rates Fringes

CARPENTER

WESTERN WASHINGTON:

CLALLAM, GRAYS HARBOR,

ISLAND, JEFFERSON, KING,

KITSAP, LEWIS (excludes piledrivers only), MASON, PACIFIC (North of a straight line made by extending the north boundary line of Wahkiakum County west to the Pacific Ocean), PIERCE, SAN JUAN, SKAGIT, SNOHOMISH, THURSTON AND WHATCOM

COUNTIES

BRIDGE CARPENTERS..........$ 40.36 13.66

CARPENTERS ON CREOSOTE

MATERIAL...................$ 40.46 13.66

CARPENTERS.................$ 40.36 13.66

DIVERS TENDER..............$ 44.67 13.66

D - 7

DIVERS.....................$ 93.56 13.66

MILLWRIGHT AND MACHINE

ERECTORS...................$ 41.86 13.66

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING.......$ 40.61 13.66

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON ‐ ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham Auburn Bremerton Anacortes Renton Shelton Yakima Aberdeen‐Hoquiam Tacoma Wenatchee Ellensburg Everett Port Angeles Centralia Mount Vernon Sunnyside Chelan Pt. Townsend

Zone Pay:

0 ‐25 radius miles Free 26‐35 radius miles $1.00/hour 36‐45 radius miles $1.15/hour 46‐55 radius miles $1.35/hour Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON ‐ MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

Zone Pay:

0 ‐25 radius miles Free 26‐45 radius miles $ .70/hour Over 45 radius miles $1.50/hour

ELEC0046‐001 02/01/2016

CALLAM, JEFFERSON, KING AND KITSAP COUNTIES

D - 8

CABLE SPLICER....................$ 46.87 3%+15.96

ELECTRICIAN......................$ 45.77 3%+17.91

* ELEC0048‐003 01/01/2016

CLARK, KLICKITAT AND SKAMANIA COUNTIES

Rates Fringes

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 40.20 21.11

HOURLY ZONE PAY:

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria

Zone Pay:

Zone 1: 31‐50 miles $1.50/hour Zone 2: 51‐70 miles $3.50/hour Zone 3: 71‐90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour

*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.

ELEC0048‐029 01/01/2016

COWLITZ AND WAHKIAKUM COUNTY

Rates Fringes

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 40.20 21.11

* ELEC0073‐001 07/01/2016

ADAMS, FERRY, LINCOLN, PEND OREILLE, SPOKANE, STEVENS, WHITMAN

COUNTIES

D - 9

CABLE SPLICER....................$ 34.10 16.68

ELECTRICIAN......................$ 31.50 17.60

ELEC0076‐002 09/01/2014

GRAYS HARBOR, LEWIS, MASON, PACIFIC, PIERCE, AND THURSTON

CABLE SPLICER....................$ 37.94 23.36

ELECTRICIAN......................$ 34.49 23.36

ELEC0112‐005 06/01/2015

ASOTIN, BENTON, COLUMBIA, FRANKLIN, GARFIELD, KITTITAS, WALLA

WALLA, YAKIMA COUNTIES

CABLE SPLICER....................$ 40.74 18.65

ELECTRICIAN......................$ 38.80 18.59

* ELEC0191‐003 06/01/2015

ISLAND, SAN JUAN, SNOHOMISH, SKAGIT AND WHATCOM COUNTIES

Rates Fringes

CABLE SPLICER....................$ 44.23 17.73

ELECTRICIAN......................$ 41.15 18.25

* ELEC0191‐004 06/01/2015

CHELAN, DOUGLAS, GRANT AND OKANOGAN COUNTIES

Rates Fringes

CABLE SPLICER....................$ 40.82 17.63

ELECTRICIAN......................$ 38.15 18.16

ENGI0302‐003 06/01/2014

CHELAN (WEST OF THE 120TH MERIDIAN), CLALLAM, DOUGLAS (WEST OF

THE 120TH MERIDIAN), GRAYS HARBOR, ISLAND, JEFFERSON, KING,

D - 10

KITSAP, KITTITAS, MASON, OKANOGAN (WEST OF THE 120TH MERIDIAN),

SAN JUNA, SKAGIT, SNOHOMISH, WHATCOM AND YAKIMA (WEST OF THE

120TH MERIDIAN) COUNTIES

PROJECTS: CATEGORY A PROJECTS (EXCLUDES CATEGORY B PROJECTS, AS

SHOWN BELOW)

Zone 1 (0‐25 radius miles):

Power equipment operators:

Group 1A...................$ 38.39 17.39 Group 1AA..................$ 38.96 17.39 Group 1AAA.................$ 39.52 17.39 Group 1.....................$ 37.84 17.39 Group 2.....................$ 37.35 17.39 Group 3.....................$ 36.93 17.39 Group 4.....................$ 34.57 17.39

Zone Differential (Add to Zone 1 rates):

Zone 2 (26‐45 radius miles) ‐ $1.00 Zone 3 (Over 45 radius miles) ‐ $1.30

BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles, Port Townsend, Seattle, Shelton, Wenatchee, Yakima

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1AAA ‐ Cranes‐over 300 tons, or 300 ft of boom (including jib with attachments)

GROUP 1AA ‐ Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane over 175 ft in height, base to boom

GROUP 1A ‐ Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane‐overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders‐overhead, 8 yards and over; Shovels, excavator, backhoes‐6 yards and over with attachments

GROUP 1 ‐ Cableway; Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments); Crane‐overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes over 3 yards and under 6

D - 11 yards; Hard tail end dump articulating off‐road equipment 45 yards and over; Loader‐ overhead 6 yards to, but not including 8 yards; Mucking machine, mole, tunnel, drill and/or shield; Quad 9, HD 41, D‐10; Remote control operator on rubber tired earth moving equipment; Rollagon;

Scrapers‐self propelled 45 yards and over; Slipform pavers;

Transporters, all truck or track type

GROUP 2 ‐ Barrier machine (zipper); Batch Plant Operaor‐ Concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane‐overhead, bridge type‐20 tons through 44 tons; Chipper; Concrete Pump‐truck mount with boom attachment; Crusher; Deck Engineer/Deck Winches (power);

Drilling machine; Excavator, shovel, backhoe‐3yards and under; Finishing Machine, Bidwell, Gamaco and similar equipment; Guardrail punch; Horizontal/directional drill operator; Loaders‐overhead under 6 yards; Loaders‐plant feed; Locomotives‐all; Mechanics‐all; Mixers‐asphalt plant;

Motor patrol graders‐finishing; Piledriver (other than crane mount); Roto‐mill,roto‐grinder; Screedman, spreader, topside operator‐Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green; Scraper‐self propelled, hard tail end dump, articulating off‐road equipment‐under 45 yards; Subgrade trimmer; Tractors, backhoes‐over 75 hp;

Transfer material service machine‐shuttle buggy, blaw knox‐roadtec; Truck crane oiler/driver‐100 tons and over;

Truck Mount portable conveyor; Yo Yo Pay dozer

GROUP 3 ‐ Conveyors; Cranes‐thru 19 tons with attachments;

A‐frame crane over 10 tons; Drill oilers‐auger type, truck or crane mount; Dozers‐D‐9 and under; Forklift‐3000 lbs.

and over with attachments; Horizontal/directional drill locator; Outside hoists‐(elevators and manlifts), air tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons; Loader‐elevating type, belt; Motor patrol grader‐nonfinishing; Plant oiler‐ asphalt, crusher;

Pumps‐concrete; Roller, plant mix or multi‐lift materials;

Saws‐concrete; Scrpers‐concrete and carry‐all; Service engineer‐equipment; Trenching machines; Truck Crane Oiler/Driver under 100 tons; Tractors, backhoe 75 hp and under

GROUP 4 ‐ Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete finish mahine‐laser screed; Cranes‐A frame‐10 tons and under; Elevator and Manlift‐permanent or shaft type;

Gradechecker, Stakehop; Forklifts under 3000 lbs. with attachments; Hydralifts/boom trucks, 10 tons and under; Oil distributors, blower distribution and mulch seeding

D - 12 operator; Pavement breaker; Posthole digger, mechanical;

Power plant; Pumps, water; Rigger and Bellman; Roller‐other than plant mix; Wheel Tractors, farmall type;

Shotcrete/gunite equipment operator

Category B Projects: 95% of the basic hourly reate for each group plus full fringe benefits applicable to category A projects shall apply to the following projects. A Reduced rates may be paid on the following:

1. Projects involving work on structures such as buildings and bridges whose total value is less than $1.5 million excluding mechanical, electrical, and utility portions of the contract.

2. Projects of less than $1 million where no building is involved. Surfacing and paving included, but utilities excluded.

3. Marine projects (docks, wharfs, etc.) less than $150,000.

HANDLING OF HAZARDOUS WASTE MATERIALS:

Personnel in all craft classifications subject to working inside a federally designated hazardous perimeter shall be elgible for compensation in accordance with the following group schedule relative to the level of hazardous waste as outlined in the specific hazardous waste project site safety plan.

H‐1 Base wage rate when on a hazardous waste site when not outfitted with protective clothing

H‐2 Class "C" Suit ‐ Base wage rate plus $ .25 per hour.

H‐3 Class "B" Suit ‐ Base wage rate plus $ .50 per hour.

H‐4 Class "A" Suit ‐ Base wage rate plus $ .75 per hour.

Zone Differential (Add to Zone 1 rates):

Zone 2 (26‐45 radius miles) ‐ $ .70 Zone 3 (Over 45 radius miles) ‐ $1.00

BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles, Port Townsend, Seattle, Shelton, Wenatchee, Yakima

D - 13

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1AAA ‐ Cranes‐over 300 tons, or 300 ft of boom (including jib with attachments)

GROUP 1AA ‐ Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane over 175 ft in height, base to boom

GROUP 1A ‐ Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane‐overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders‐overhead, 8 yards and over; Shovels, excavator, backhoes‐6 yards and over with attachments

GROUP 1 ‐ Cableway; Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments); Crane‐overhead, bridge type, 45 tons thru 99 tons; Derricks on building work;

Excavator, shovel, backhoes over 3 yards and under 6 yards;

Hard tail end dump articulating off‐road equipment 45 yards and over; Loader‐ overhead 6 yards to, but not including 8 yards; Mucking machine, mole, tunnel, drill and/or shield;

Quad 9, HD 41, D‐10; Remote control operator on rubber tired earth moving equipment; Rollagon; Scrapers‐self propelled 45 yards and over; Slipform pavers; Transporters, all truck or track type

GROUP 2 ‐ Barrier machine (zipper); Batch Plant Operaor‐ Concrete; Bump Cutter; Cranes, 20 tons thru 44 tons with attachments; Crane‐overhead, bridge type‐20 tons through 44 tons; Chipper; Concrete Pump‐truck mount with boom attachment; Crusher; Deck Engineer/Deck Winches (power);

Drilling machine; Excavator, shovel, backhoe‐3 yards and under; Finishing Machine, Bidwell, Gamaco and similar equipment; Guardrail punch; Horizontal/directional drill operator; Loaders‐overhead under 6 yards; Loaders‐plant feed;

Locomotives‐all; Mechanics‐all; Mixers‐asphalt plant; Motor patrol graders‐finishing; Piledriver (other than crane mount); Roto‐mill,roto‐grinder; Screedman, spreader, topside operator‐Blaw Knox, Cedar Rapids, Jaeger, Caterpillar, Barbar Green; Scraper‐self propelled, hard tail end dump, articulating off‐road equipment‐under 45 yards; Subgrade trimmer; Tractors, backhoes‐over 75 hp; Transfer material service machine‐shuttle buggy, blaw knox‐roadtec; Truck crane oiler/driver‐100 tons and over; Truck Mount portable conveyor; Yo Yo Pay dozer

D - 14

GROUP 3 ‐ Conveyors; Cranes‐thru 19 tons with attachments;

A‐frame crane over 10 tons; Drill oilers‐auger type, truck or crane mount; Dozers‐D‐9 and under; Forklift‐3000 lbs. and over with attachments; Horizontal/directional drill locator;

Outside hoists‐(elevators and manlifts), air tuggers, strato tower bucket elevators; Hydralifts/boom trucks over 10 tons;

Loader‐elevating type, belt; Motor patrol grader‐nonfinishing; Plant oiler‐ asphalt, crusher;

Pumps‐concrete; Roller, plant mix or multi‐lift materials;

Saws‐concrete; Scrpers‐concrete and carry‐all; Service engineer‐equipment; Trenching machines; Truck Crane Oiler/Driver under 100 tons; Tractors, backhoe 75 hp and under

GROUP 4 ‐ Assistant Engineer; Bobcat; Brooms; Compressor;

Concrete finish mahine‐laser screed; Cranes‐A frame‐10 tons and under; Elevator and Manlift‐permanent or shaft type;

Gradechecker, Stakehop; Forklifts under 3000 lbs. with attachments; Hydralifts/boom trucks, 10 tons and under; Oil distributors, blower distribution and mulch seeding operator;

Pavement breaker; Posthole digger, mechanical; Power plant;

Pumps, water; Rigger and Bellman; Roller‐other than plant mix; Wheel Tractors, farmall type; Shotcrete/gunite equipment operator

CATEGORY B PROJECTS: 95% OF THE BASIC HOURLY RATE FOR EACH

GROUP PLUS FULL FRINGE BENEFITS APPLICABLE TO CATEGORY A

PROJECTS SHALL APPLY TO THE FOLLOWING PROJECTS. REDUCED

RATES MAY BE PAID ON THE FOLLOWING:

1. Projects involving work on structures such as buildings and bridges whose total value is less than $1.5 million excluding mechanical, electrical, and utility portions of the contract.

2. Projects of less than $1 million where no building is involved. Surfacing and paving including, but utilities excluded.

3. Marine projects (docks, wharfs, ect.) less than $150,000.

HANDLING OF HAZARDOUS WASTE MATERIALS: Personnel in all craft classifications subject to working inside a federally designed hazardous perimeter shall be elgible for compensation in accordance with the following group schedule relative to the level of hazardous waste as outlined in the specific hazardous waste project site safety plan.

H‐1 Base wage rate when on a hazardous waste site when not outfitted with protective clothing.

H‐2 Class "C" Suit ‐ Base wage rate plus $.25 per hour.

D - 15

H‐3 Class "B" Suit ‐ Base wage rate plus $.50 per hour.

H‐4 Class "A" Suit ‐ Base wage rate plus $.75 per hour.

ENGI0370‐002 06/01/2015

ADAMS, ASOTIN, BENTON, CHELAN (EAST OF THE 120TH MERIDIAN),

COLUMBIA, DOUGLAS (EAST OF THE 120TH MERIDIAN), FERRY,

FRANKLIN, GARFIELD, GRANT, LINCOLN, OKANOGAN (EAST OF THE 120TH

MERIDIAN), PEND OREILLE, SPOKANE, STEVENS, WALLA WALLA, WHITMAN

AND YAKIMA (EAST OF THE 120TH MERIDIAN) COUNTIES

ZONE 1:

POWER EQUIPMENT OPERATOR

GROUP 1.....................$ 26.16 13.55

GROUP 2.....................$ 26.48 13.55

GROUP 3.....................$ 27.09 13.55

GROUP 4.....................$ 27.25 13.55

GROUP 5.....................$ 27.41 13.55

GROUP 6.....................$ 27.69 13.55

GROUP 7.....................$ 27.96 13.55

GROUP 8.....................$ 29.06 13.55

ZONE DIFFERENTIAL (Add to Zone 1 rate): Zone 2 ‐ $2.00

Zone 1: Within 45 mile radius of Spokane, Pasco, Washington;

Lewiston, Idaho

Zone 2: Outside 45 mile radius of Spokane, Pasco, Washington; Lewiston, Idaho

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bit Grinders; Bolt Threading Machine; Compressors (under 2000 CFM, gas, diesel, or electric power); Deck Hand; Fireman & Heater Tender; Hydro‐seeder, Mulcher, Nozzleman; Oiler Driver, & Cable Tender, Mucking Machine;

Pumpman; Rollers, all types on subgrade, including seal and chip coatings (farm type, Case, John Deere & similar, or Compacting Vibrator), except when pulled by Dozer with operable blade; Welding Machine; Crane Oiler‐Driver (CLD required) & Cable Tender, Mucking Machine

D - 16

GROUP 2: A‐frame Truck (single drum); Assistant Refrigeration Plant (under 1000 ton); Assistant Plant Operator, Fireman or Pugmixer (asphalt); Bagley or Stationary Scraper; Belt Finishing Machine; Blower Operator (cement); Cement Hog;

Compressor (2000 CFM or over, 2 or more, gas diesel or electric power); Concrete Saw (multiple cut); Distributor Leverman; Ditch Witch or similar; Elevator Hoisting Materials; Dope Pots (power agitated); Fork Lift or Lumber Stacker, hydra‐lift & similar; Gin Trucks (pipeline);

Hoist, single drum; Loaders (bucket elevators and conveyors); Longitudinal Float; Mixer (portable‐concrete);

Pavement Breaker, Hydra‐Hammer & similar; Power Broom;

Railroad Ballast Regulation Operator (self‐propelled);

Railroad Power Tamper Operator (self‐propelled); Railroad Tamper Jack Operator (self‐propelled; Spray Curing Machine (concrete); Spreader Box (self‐propelled); Straddle Buggy (Ross & similar on construction job only); Tractor (Farm type R/T with attachment, except Backhoe); Tugger Operator

GROUP 3: A‐frame Truck (2 or more drums); Assistant Refrigeration Plant & Chiller Operator (over 1000 ton);

Backfillers (Cleveland & similar); Batch Plant & Wet Mix Operator, single unit (concrete); Belt‐Crete Conveyors with power pack or similar; Belt Loader (Kocal or similar);

Bending Machine; Bob Cat (Skid Steer); Boring Machine (earth); Boring Machine (rock under 8 inch bit) (Quarry Master, Joy or similar); Bump Cutter (Wayne, Saginau or similar); Canal Lining Machine (concrete); Chipper (without crane); Cleaning & Doping Machine (pipeline); Deck Engineer; Elevating Belt‐type Loader (Euclid, Barber Green & similar); Elevating Grader‐type Loader (Dumor, Adams or similar); Generator Plant Engineers (diesel or electric);

Gunnite Combination Mixer & Compressor; Locomotive Engineer; Mixermobile; Mucking Machine; Posthole Auger or Punch; Pump (grout or jet); Soil Stabilizer (P & H or similar); Spreader Machine; Dozer/Tractor (up to D‐6 or equivalent) and Traxcavator; Traverse Finish Machine;

Turnhead Operator

GROUP 4: Concrete Pumps (squeeze‐crete, flow‐crete, pump‐ crete, Whitman & similar); Curb Extruder (asphalt or concrete); Drills (churn, core, calyx or diamond);

Equipment Serviceman; Greaser & Oiler; Hoist (2 or more drums or Tower Hoist); Loaders (overhead & front‐end, under 4 yds. R/T); Refrigeration Plant Engineer (under 1000 ton);

Rubber‐tired Skidders (R/T with or without attachments);

Surface Heater & Plant Machine; Trenching Machines (under 7

ft. depth capacity); Turnhead (with re‐screening); Vacuum

D - 17

Drill (reverse circulation drill under 8 inch bit)

GROUP 5: Backhoe (under 45,000 gw); Backhoe & Hoe Ram (under 3/4 yd.); Carrydeck & Boom Truck (under 25 tons); Cranes (25 tons & under), all attachments including clamshell, dragline; Derricks & Stifflegs (under 65 tons); Drilling Equipment(8 inch bit & over) (Robbins, reverse circulation & similar); Hoe Ram; Piledriving Engineers; Paving (dual drum); Railroad Track Liner Operaotr (self‐propelled);

Refrigeration Plant Engineer (1000 tons & over); Signalman (Whirleys, Highline Hammerheads or similar); Grade Checker

GROUP 6: Asphalt Plant Operator; Automatic Subgrader (Ditches & Trimmers)(Autograde, ABC, R.A. Hansen & similar on grade wire); Backhoe (45,000 gw and over to 110,000 gw); Backhoes & Hoe Ram (3/4 yd. to 3 yd.); Batch Plant (over 4 units);

Batch & Wet Mix Operator (multiple units, 2 & incl. 4);

Blade Operator (motor patrol & attachments); Cable Controller (dispatcher); Compactor (self‐propelled with blade); Concrete Pump Boom Truck; Concrete Slip Form Paver;

Cranes (over 25 tons, to and including 45 tons), all attachments including clamshell, dragline; Crusher, Grizzle & Screening Plant Operator; Dozer, 834 R/T & similar; Drill Doctor; Loader Operator (front‐end & overhead, 4 yds. incl.

8 yds.); Multiple Dozer Units with single blade; Paving Machine (asphalt and concrete); Quad‐Track or similar equipment; Rollerman (finishing asphalt pavement); Roto Mill (pavement grinder); Scrapers, all, rubber‐tired;

Screed Operator; Shovel(under 3 yds.); Trenching Machines (7 ft. depth & over); Tug Boat Operator Vactor guzzler, super sucker; Lime Batch Tank Operator (REcycle Train);

Lime Brain Operator (Recycle Train); Mobile Crusher Operator (Recycle Train)

GROUP 7: Backhoe (over 110,000 gw); Backhoes & Hoe Ram (3 yds & over); Blade (finish & bluetop) Automatic, CMI, ABC, Finish Athey & Huber & similar when used as automatic;

Cableway Operators; Concrete Cleaning/Decontamination machine operator; Cranes (over 45 tons to but not including 85 tons), all attachments including clamshell and dragine;

Derricks & Stiffleys (65 tons & over); Elevating Belt (Holland type); Heavy equipment robotics operator; Loader (360 degrees revolving Koehring Scooper or similar);

Loaders (overhead & front‐end, over 8 yds. to 10 yds.);

Rubber‐tired Scrapers (multiple engine with three or more scrapers); Shovels (3 yds. & over); Whirleys & Hammerheads, ALL; H.D. Mechanic; H.D. Welder; Hydraulic Platform Trailers (Goldhofer, Shaurerly andSimilar); Ultra High

D - 18

Pressure Wateriet Cutting Tool System Operator (30,000 psi); Vacuum Blasting Machine Operator

GROUP 8: Cranes (85 tons and over, and all climbing, overhead,rail and tower), all attachments including clamshell, dragline; Loaders (overhead and front‐end, 10 yards and over); Helicopter Pilot

BOOM PAY: (All Cranes, Including Tower) 180 ft to 250 ft $ .50 over scale Over 250 ft $ .80 over scale

NOTE:

In computing the length of the boom on Tower Cranes, they shall be measured from the base of the Tower to the point of the boom.

HAZMAT:

Anyone working on HAZMAT jobs, working with supplied air shall receive $1.00 an hour above classification.

ENGI0612‐012 06/01/2014

LEWIS,PIERCE, PACIFIC (portion lying north of a parallel line extending west from the northern boundary of Wahkaikum County to the sea) AND THURSTON COUNTIES

ON PROJECTS DESCRIBED IN FOOTNOTE A BELOW, THE RATE FOR EACH

GROUP SHALL BE 90% OF THE BASE RATE PLUS FULL FRINGE BENEFITS.

ON ALL OTHER WORK, THE FOLLOWING RATES APPLY.

Zone 1 (0‐25 radius miles):

GROUP 1A...................$ 38.39 17.40

GROUP 1AA..................$ 38.96 17.40

GROUP 1AAA.................$ 39.52 17.40

GROUP 1.....................$ 37.84 17.40

GROUP 2.....................$ 37.35 17.40

GROUP 3.....................$ 36.93 17.40

GROUP 4.....................$ 34.57 17.40

Zone Differential (Add to Zone 1 rates):

Zone 2 (26‐45 radius miles) = $1.00

D - 19

Zone 3 (Over 45 radius miles) ‐ $1.30

BASEPOINTS: CENTRALIA, OLYMPIA, TACOMA

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1 AAA ‐ Cranes‐over 300 tons or 300 ft of boom (including jib with attachments)

GROUP 1AA ‐ Cranes‐ 200 tonsto 300 tons, or 250 ft of boom (including jib with attachments; Tower crane over 175 ft in height, bas to boom

GROUP 1A ‐ Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments); Crane‐overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders‐overhead, 8 yards and over; Shovels, excavator, backhoes‐6 yards and over with attachments

GROUP 1 ‐ Cableway; Cranes 45 tons thru 99 tons under 150 ft of boom (including jib with attachments); Crane‐overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes over 3 yards and under 6 yards; Hard tail end dump articulating off‐road equipment 45 yards and over; Loader‐ overhead, 6 yards to, but not including,…