Amendment-02_DTFASA-17-R-00227.pdf

OMB Control No. 2120-0595 (SF-30) FAA Template No. 11 (8/97)

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

01 02

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

DTFASA-17-R-00227/02 04/18/2017 WS-17-01058

6. ISSUED BY 7. ADMINISTRATED BY (If other than Item 6)

DOT/FAA

1601 LIND AVE SW, RENTON, WA 98057

SAME

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

PROSPECTIVE QUOTERS

9A. AMENDMENT OF SOLICITATION NO.

DTFASA-17-R-00227/02

9B. DATED (SEE ITEM 11)

04/20/2017

10A. MODIFICATION OF CONTRACT/ORDER NO.

*TO BE COMPLETED BY VENDOR IF NOT COMPLETE 10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation on as amended, by one of the following methods:

(a) By completing Item 8 and 15, and returning copies of the amendment; (b) acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDG- MENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hours and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS, IT MODIFIES THE CONTRACT/ORDER NO.

AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT/ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

REVISED SPECIFICATIONS

E. IMPORTANT: Contractor is not, is required to sign this document and return 01 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PLEASE SEE THE THREE (3) ATTACHMENTS

01 11 00 -2 SUMMARY OF WORK LINE ITEMS 5 AND 8

09 96 46 -1 PART 1.3C QUALITY ASSURANCE

FAA SPECIFICATIONS_JUNEAU_REV1

PROPOSALS ARE DUE THURSDAY, APRIL 20, 2017 AT 5:00PM LOCAL TIME.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

(Signature of person authorized to sign)

BY

(Signature of Contracting Officer)

Attached you will find three documents.

1) 01 11 00 -2 Summary of Work Line items 5 and 8 100% FAA Spec JNU Rev1 aw 4-14-2017.pdf – The highlighted yellow texts show the added information. Line 5 refers to interior surfaces being repainted to match existing. Line 8 refers to Contractor responsibility of moving the furniture and equipment. A new verbiage had been added as shown in the highlighted yellow texts.

The original specification for line 5, third sentence was… “The interior surfaces will be repainted with off-white, flat finish”. The words, “ with off-white, flat finish” had been replaced with, “ to match existing”. The fourth sentence, “FAA personnel will determine if interior painting is required in the Communications Room #113 and Telephone Room #112 plywood backboards, if required two coats of intumescent paint (fire retardant paint) is required on the plywood backboards only, see Section 09 96 46” had been deleted.

2) 09 96 46 – 1 Part 1.3C Quality Assurance, line 1, 100% FAA Spec JNU Rev1 aw 4-14-2017.pdf – the highlighted yellow texts refer to just painting around the plywood backboard ¾ inch plywood.

The original specification for 09 096 46 – 1 Part 1.3C Quality Assurance, line 1, was… “ Products:

Plywood backboard ¾ inch plywood (at least one wall). Painted with two coats fire-retardant paint. No longer required to be painted white.” Starting from, “(at least one wall)” and the last two sentences had been deleted and replaced with adding a period after the word, “plywood” and a new sentence, “Paint around it.”

3) 100% FAA Specifications Juneau Rev1 aw 4-14-2017.pdf – this is the latest version of the 100% FAA Spec Juneau that incorporated the highlighted texts mentioned above.

So the responses on #3 Paint Colors and #4 Existing Office Furniture/Storage Lockers below have been refined and addressed in the documents above.