DR_0676A0001_59678_-_001_001.PDF
PDF 114 KB Posted
- Solicitation number
- W912CH-25-R-0205
- Issued by
-
Department of the Army
About this file
This technical drawing specification details U.S. Army tie-down equipment requirements for a transportation and lifting system. The document, created by the Army Armament Research, Development and Engineering Center, specifies equipment with precise technical requirements for chains, wire ropes, and webbed slings. Key specifications include: two tie-down equipment items must be provided, each at least eight feet long and rated for a minimum of 500 pounds, with a positive tensioning device. Material requirements specify steel chains that are corrosion-resistant or made of stainless steel, wire ropes with Flemish eye formations, and webbing that is resistant to ultraviolet rays, abrasion, oil, and water. The drawing is marked with a Distribution Statement A, indicating approved for public release with unlimited distribution.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| DR_0676A0004_59678_-_001_001.PDF | ||
| DR_0676A0000_59678_-_001_001.PDF | ||
| DR_0676A0002_59678_-_001_001.PDF | ||
| W912CH25R0205.pdf | ||
| DR_0740E0000_59678_A_001_001.PDF | ||
| DR_0676A0003_59678_A_001_001.PDF |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
C
A
D
D
C
B
A
CONTRACT NUMBER
CAGE CODESIZE
SCALE UNIT WT.
DESIGN ACTIVITY
CONTRACTOR
DRAWN BY DATE(YEAR-MO-DA)
CHECKER ENGINEER
ENGINEER QUALITY ENGINEER
DRAWING APPROVAL
DESIGN APPROVAL
B
MODELED BYMATL ENGR
SHEET
TOLERANCE ON ANGLES
2 PLACE DECIMALS
3 PLACE DECIMALS
FORMAT: C_TACOM_ENG_1_0
DRAWING SIZE C
DWG NO.
2016-06-15V. VONDERA
2016-06-15B. VERMULM
J. LANGELJ. MILLER
2015-09-10J. LANGEL
J. LANGEL
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
DO NOT SCALE DRAWING
APPLICATION
USED ONNEXT ASSY
TRNAS LIFT0676A0000
PMIC
MECHANICAL
PROPERTIES
YP
TS
EL2
RA
BH
RH
REVISIONS
APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION
VEV2016-06-15PRODUCT BASELINE - ERR K16O3016-
PART NO. 0676A0001
THIS DRAWING WAS GENERATED FROM A SOLID MODEL
AND IS CAD MAINTAINED. CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
NOTES
1. APPLICABLE STANDARDS/SPECIFICATIONS:
A. ASME Y14.100-2013
B. ASME Y14.5-2009
2. TIE DOWN EQUIPMENT: TWO CHAINS, WEBBED SLINGS OR WIRE ROPES, EACH NO LESS
THAN EIGHT (8) FEET LONG AND RATED FOR NO LESS THAN 500 POUNDS, SHALL BE
PROVIDED FOR SECURING THE LOAD DURING TRANSPORTING, LIFTING AND LOWERING.
EACH CHAIN, WEB OR WIRE ROPE SHALL BE FURNISHED WITH A POSITIVE TENSIONING
DEVICE RATED FOR NO LESS THAN 500 POUNDS THAT CAN BE ATTACHED AT ANY POSITION
ON THE CHAIN, WEB OR WIRE ROPE.
2.1. CHAIN: CHAINS SHALL BE MADE OF STEEL AND PLATED TO RESIST CORROSION, OR MADE OF
STAINLESS STEEL.
2.2. WIRE ROPES: WIRE ROPES SHALL HAVE A FLEMISH EYE FORMED IN EACH END. THE FLEMISH EYE SHALL BE LARGE ENOUGH TO SLIP EITHER EYE THROUGH THE OTHER EYE TO FORM A SLING.
2.3. WEBBING: WEBBING SHALL BE RESISTANT TO ULTRA-VIOLET RAYS, ABRASION, SNAG,
OIL AND WATER. WEBBING ENDS AND EDGES SHALL BE WOVEN OR OTHERWISE PROTECTED
TO RESIST FRAYING AND UNRAVELING.
CHAIN WIRE ROPE WEBBED SLING
1 OF 10.0001/1
0676A000159678C
TIE DOWN EQUIPMENT
US ARMY
ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER
ROCK ISLAND, ILLINOIS 61299-5000
2016-06-15V. VONDERA
2016-06-15B. VERMULM
J. LANGELJ. MILLER
2015-09-10J. LANGEL
J. LANGEL
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
DO NOT SCALE DRAWING
APPLICATION
USED ONNEXT ASSY
TRNAS LIFT0676A0000
PMIC
MECHANICAL
PROPERTIES
YP
TS
EL2
RA
BH
RH
PART NO. 0676A0001
THIS DRAWING WAS GENERATED FROM A SOLID MODEL
AND IS CAD MAINTAINED. CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
NSN
DISTRIBUTION STATEMENT A. APPROVED
FOR PUBLIC RELEASE; DISTRIBUTION IS
UNLIMITED.
Sheet 1
File details come from the government source that posted it. Updated .