DOTD 154_002.pdf
PDF 7 KB Posted
- Attached to
- DOTD Extruded Panels and Hardware State and local contract opportunity
- Solicitation number
- 3000025420
- Issued by
- Louisiana
About this file
This document is a Louisiana Department of Transportation and Development (DOTD) specification for extruded panel hardware, specifically detailing two types of hardware assemblies with precise material and component requirements. The specification covers two SAP Material Master Numbers: 11947 for panel mounting assembly hardware and 11948 for post clip assembly hardware. Each assembly consists of specific aluminum alloy bolts, washers, and locknuts, with strict instructions that all parts must be assembled by hand before delivery and locknuts should not be engaged.
The specification provides detailed technical requirements for the hardware components, including exact measurements, alloy types (2024-T4, 2017-T4, and 356-T6), and dimensional specifications for bolts, washers, and clips. The packaging and delivery instructions mandate that assemblies must be supplied in containers not exceeding 250 units per container. The document is dated Revision 1/8/2013 and includes specific SAP Material Master Numbers and material classification codes for each hardware assembly type.
View the file
Other files for this state and local contract opportunity
| File | Type | Posted |
|---|---|---|
| MS_154_001.pdf | ||
| DOTD_154_003.pdf | ||
| PREFERENCE LOUISIANA.pdf | ||
| 3000025420.pdf | ||
| BID SUBMISSION INSTRUCTIONS.pdf | ||
| PREFERENCE U.S..pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SAP Material Master Number DOTD Spec. 154-002 See Below Rev. 1/8/2013
LOUISIANA
DEPARTMENT OF TRANSPORTATION AND DEVELOPMENT
SPECIFICATIONS
EXTRUDED PANEL HARDWARE
SAP Material Master Number 11947 (32-03-2700) Panel mounting assembly hardware shall consist of a 3/8 inch-16 UNC by 3/4 inch aluminum alloy 2024-T4, hex head bolt, compatible with extruded panels. Must include two 3/8 inch aluminum flatwashers 1 inch x 7/16 inch x .078 inch and one 3/8 inch aluminum alloy 2017-T4 hex head locknut. All parts to be assembled by hand before delivery. Locknuts should not be engaged.
SAP Material Master Number 11948 (32-03-2705) Post clip assembly hardware shall consist of an aluminum alloy 356-T6 post clip with one 3/8 inch-16 UNC by 1 3/4 inch aluminum alloy 2024-T4, rectangular head bolt. Must include one 3/8 inch aluminum flatwasher, 2024-T3, 3/4 inch x 25/64 inch by .090 inch thick and one 3/8 inch aluminum alloy 2017-T4 hex head locknut. All parts to be assembled by hand before delivery. Locknuts should not be engaged.
PACKAGING AND DELIVERY:
Assemblies to be supplied in containers that do not exceed 250 units per container.
File details come from the government source that posted it. Updated .