DL20191700_CUI.pdf

DATA LIST

REVISIONCAGE CODECONTRACT NO.DESIGN ACTIVITY

DL 201917000B275

AFLCMC/EZPAA

WPAFB, OHIO

SHEETLIST TITLE

SHIPPING & STORAGE CONTAINER,

MISCELLANEOUS EQUIPMENT, CNU-766/E

NOMENCLATURE OR DESCRIPTION

REV

LTR

SHT

NO

DOCUMENT NUMBER

DWG

SIZE

CAGE CODE

SHIPPING AND STORAGE CONTAINER,

MISCELLANEOUS EQUIPMENT, CNU-766/E

FOAM, BASE, UPPER

FOAM, BASE, LOWER

FOAM, COVER

FOAM, WALL

PLATE, IDENTIFICATION

REFERENCED DRAWING PACKAGE

SHIPPING AND STORAGE

CONTAINER, MULTI-PURPOSE

20191700

20191701

20191702

20191703

20191704

20191705

20171300

D

C

C

B

LTR

SHT

NO

DOCUMENT NUMBER

DWG

SIZE

CAGE CODE

REFERENCED DOCUMENTS

INK, MARKING, STENCIL, OPAQUE

(POROUS AND NON-POROUS

SURFACES)

CUSHIONING MATERIAL, PACKAGING,

CLOSED CELL FOAM PLANK

ENGINEERING DRAWING PRACTICES

DIMENSIONING AND TOLERANCING

AMERICAN NATIONAL STANDARD FOR

USE OF THE INTERNATIONAL SYSTEM OF

UNITS (SI): THE MODERN METRIC SYSTEM

INFORMATION TECHNOLOGY--EAN/UCC

APPLICATION IDENTIFIERS AND FACT DATA

IDENTIFIERS AND MAINTENANCE

INFORMATION TECHNOLOGY--TRANSFER

SYNTAX FOR HIGH CAPACITY ADC MEDIA

PLATES, IDENTIFICATION OR

INSTRUCTION, METAL FOIL.

ADHESIVE BACKED, GENERAL

SPECIFICATION FOR

IDENTIFICATION MARKING OF

U.S. MILITARY PROPERTY

COLORS USED IN GOVERNMENT

PROCUREMENT

PRIME ITEM PRODUCT FABRICATION

SPECIFICATION FOR THE MULTI-PURPOSE

SHIPPING AND STORAGE CONTAINER,

CNU-758/E

A-A-208C

A-A-59136

ASME Y14.100-2017

ASME Y14.5-2018

IEEE/ASTM SI 10-2016

ISO/IEC 15418:2016

ISO/IEC 15434:2019

MIL-DTL-19834C(1)

MIL-STD-130N(1)

SAE AMS-STD-595A

SP20171300

LTR

SHT

NO

DOCUMENT NUMBER

DWG

SIZE

CAGE CODE

REVISIONCAGE CODECONTRACT NO.DESIGN ACTIVITY

SHEETLIST TITLE

NOMENCLATURE OR DESCRIPTION

REV

LTR

SHT

NO

DOCUMENT NUMBER

DWG

SIZE

CAGE CODE

NOMENCLATURE OR DESCRIPTION

REV

LTR

SHT

NO

DOCUMENT NUMBER

DWG

SIZE

CAGE CODE NOMENCLATURE OR DESCRIPTION

REV

LTR

SHT

NO

DOCUMENT NUMBER

DWG

SIZE

CAGE CODE

DISTRIBUTION STATEMENT D :

DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE

AND U.S. DOD CONTRACTORS ONLY;

ADMINISTRATIVE/OPERATIONAL USE;

18-MAY-2011. OTHER REQUESTS

SHALL BE REFERRED TO THE AIR

FORCE PACKAGING TECHNOLOGY &

ENGINEERING FACILITY, DAYTON,

OH 45433.

DESTRUCTION NOTICE : DESTROY BY

ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT

CUI

A

C

D

A

B

C

D

12345678

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT DPREVIOUS EDITION WILL BE USED

FORM

FEB 74 1655AF

QUANTITY REQUIRED PER DASH NO.

3OF1SHEET0.25SCALE

DRAWING NO.AF. CODE IDENT NO.

0B275

SIZE

D

EQUIPMENT, CNU-766/E

CONTAINER, MISCELLANEOUS

SHIPPING & STORAGE

TITLE

U.S. AIR FORCE

J. A. SULLIVAN

A.F. RELEASE 20-11-18

M. R. HARFF

A.F. AUTHENTICATION

ENG

E. J. RIFE

CHK

DR

CURRENT

CODE IDENT NO.

PARTS LIST

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES - TOLERANCES ON:

ANGLESDECIMALSFRACTIONS

0.50.06 0.030

.XX

.XXX

FINALFINAL

USED ONNEXT ASSEMBLY

APPLICATION

FIND NO.ZONEUNIT WTMATERIALS/SPECIFICATIONIDENTIFYING NO.CODE IDENTNOMENCLATURESYM-10 -10-

13M_HI_STRENGTH_9004963ADHESIVE1

220191702-01FOAM, BASE, LOWER1

320191701-01FOAM, BASE, UPPER1

420191703-01FOAM, COVER1

520191704-05FOAM, WALL, AFT2

620191704-03FOAM, WALL, FWD1

720191704-01FOAM, WALL, SIDE2

8NSN# 7510-00-148-9817A-A-208OPAQUE STENCIL MARKING INK1

920191705-01PLATE, IDENTIFICATION1

1020171300-10SHIPPING AND STORAGE CONTAINER, MULTI-PURPOSE1

TOLERANCE FOR POLYETHYLENE FOAM CUSHIONS

CAVITY DIM. UP TO 6" +.09 -.06

CAVITY DIM. OVER 6" TO 18" +.12 -.09

CAVITY DIM. OVER 18" TO 36" +.25 -.09

LOCATION OF CUTOUTS +.12 -.12

OUTSIDE DIM. UP TO 18" +.09 -.19

OUTSIDE DIM. 18" TO 36" +.12 -.25

OUTSIDE DIM. OVER 36" +.19 -.31

ALL ANGLES +5 -5

ALL OTHER DIMS. +.12 -.12

NOTE:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5.

2. ALL CONVERSIONS FROM METRIC TO ENGLISH AND/OR

ENGLISH TO METRIC UNITS SHALL BE IAW IEEE/ASTM SI 10.

3 . IN ALL AREAS TO BE MARKED OR LABELS APPLIED, THE CONTAINER SURFACE SHALL BE

CLEANED TO REMOVE MILL GREASE, DIRT, AND OTHER CONTAMINANTS PRIOR TO MARKING

THE CONTAINER OR APPLYING THE IDENTIFICATION PLATE (FIND NO. 9). CLEANING

SHALL BE DONE IAW MANUFACTURER'S INSTRUCTIONS FOR IDENTIFICATION PLATE AND

MARKING INK (FIND NO. 8). AFTER CLEANING THE AREAS TO BE MARKED, PAINT OR

RUBBER STAMP USING MARKING INK. IF THE SURFACE AREA WAS CLEANED MORE THAN 8

HOURS PRIOR TO MARKING OR LABELING, THEN ANOTHER CLEANING SHALL BE DONE PRIOR

TO MARKING OR LABELING.

IDENTIFICATION PLATE (FIND NO. 9) SHALL BE LOCATED AS SHOWN.

FOAM PIECES (FIND NOS. 2-7) ARE TO BE BONDED TO ALUMINUM WITH ADHESIVE (FIND

NO. 1) IN ACCORDANCE WITH THE ADHESIVE MANUFACTURERS INSTRUCTIONS. BONDING

SHALL OCCUR OVER NOT LESS THAN 95 PERCENT OF THE INDICATED AREA IN CONTACT

WITH THE CONTAINER OR CUSHION. SURFACES SHALL BE PREPARED IAW THE ADHESIVE

MANUFACTURERS RECOMMENDED PROCEDURE.

FWD WALL FOAM (FIND NO. 6) AND SIDE WALL FOAM (FIND NO. 7) SHALL BE CENTERED

BETWEEN CONTAINER WALLS AS SHOWN.

THIS ITEM SHALL BE CONSIDERED A BULK ITEM WITH A QUANTITY OF "AS REQUIRED"

OR "AS NEEDED".

IF DRUM PLUG (FIND NO. 10, DWG NO. 20171300) HAS BEEN REPLACED WITH HUMIDITY

INDICATOR (PART NO. TA356-345P, CAGE CODE 08992), FOLLOW INSTRUCTIONS BELOW:

PACKAGING REQUIREMENTS: WHEN ITEM(S) IS PRESENT INSIDE CONTAINER FOR SHIPMENT

OR STORAGE, INSERT 8 UNITS OF DESICCANT (1) 8-UNIT BAG (PART NOS. 71030020)

INSIDE THE DESICCANT PORT AREA. A NEW TRIPLE SPOT 30/40/50% HUMIDITY DISK

(TA 356-HC 345P) MAY ALSO BE REQUIRED IF ORIGINAL ONE IS PINK. THE CAGE CODE

FOR THESE ITEMS IS 08992.

PER A-A-208, BLACK NO, 37038 PER SAE AMS-STD-595.

MARK IAW SP20171300.

11. FOAM CUTTING TOLERANCES CALLED OUT IN THIS DRAWING PACKAGE APPLY AT AMBIENT

TEMPERATURE. TOLERANCE INCREASE IS ALLOWED WHEN TEMPERATURE VARIES PER TOLERANCE

TABLE BELOW:

DISTRIBUTION STATEMENT D : DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS

ONLY; ADMINISTRATIVE/OPERATIONAL USE; 18-MAY-2011. OTHER

REQUESTS SHALL BE REFERRED TO THE AIR FORCE PACKAGING

TECHNOLOGY & ENGINEERING FACILITY, DAYTON, OH 45433.

DESTRUCTION NOTICE : DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT

C

D

A

B

C

D

12345678

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT D (CONTINUATION SHEET)PREVIOUS EDITION WILL BE USED

FORM

FEB 74 1655AF

(34.71)

(28.71)

(24.65)

(25.21)

3OF2SHEET0.25SCALE

SIZE

D

EQUIPMENT, CNU-766/E

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

( ) 9

11 8

4 10

C

D

A

B

C

D

12345678

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT D (CONTINUATION SHEET)PREVIOUS EDITION WILL BE USED

FORM

FEB 74 1655AF

3X 14.13

3.00

8.13

14.132X 14.13

(5.37)

(5.72)

(4.41)

(4.76)

(4.41)

(5.37)

3OF3SHEET0.25SCALE

SIZE

D

EQUIPMENT, CNU-766/E

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

SECTION A-A

SECTION C-C

2X

SECTION B-B

SECTION D-D

51 2X

51(1)

5 1

5 1

5 2X

5 1 2X

(1)

C

D

A

B

C

D

12345678

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT DPREVIOUS EDITION WILL BE USED

FORM

FEB 74 1655AF

QUANTITY REQUIRED PER DASH NO.

24.00

6.00

30.00

2X 4.37

2X 4.72

2X 17.57

2X 15.02

2X 1.00

8.06

2X 1.00

3X 1.00

4.26

3X 1.00

16X R1.00

2X 1.69

3X 6.84

3X 9.96

2X 15.00

3X 20.04

3X 23.16

2X 28.32

4X 1.86

3X 6.85

4X 12.00

3X 17.15

4X 22.14

8.00

16.00

2X R1.00

18X 0.75 THRU

2X 2.02

4X 0.90

2X 5.14

2X 1.23

2X 1.80

1.50

1OF1SHEET0.25SCALE

20191701

SIZE

FOAM, BASE, UPPER

CODE IDENT NO.

PARTS LIST

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES - TOLERANCES ON:

ANGLESDECIMALSFRACTIONS

0.50.06

.XX

.XXX

MATERIALS:

POLYETHYLENE FOAM

A-A-59136

TYPE III, CLASS 4

GRADE A, COLOR BLACK

4.0 LBS/CU FT

20191700-1020191700-10

USED ONNEXT ASSEMBLY

APPLICATION

FIND NO.ZONEUNIT WTMATERIALS/SPECIFICATIONIDENTIFYING NO.CODE IDENTNOMENCLATURESYM

-01

NOTE:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5.

2. ALL CONVERSIONS FROM METRIC TO ENGLISH AND/OR ENGLISH TO METRIC UNITS SHALL BE IAW IEEE/ASTM SI 10.

FOAM MATERIAL MUST CONTAIN LESS THAN 10% OF LEL FLAMMABLE BLOWING AGENT BY VOLUME OF MATERIAL.

4. THE CUSHION DESIGN MUST BE MADE WITH ONE OR A COMBINATION OF THE FOLLOWING METHODS: HEAT-BONDED CUSHION PIECES, ADHESIVE BONDED CUSHION PIECES, OR ONE CONTINUOUS PIECE OF MATERIAL. THE CUSHION SHALL BE FABRICATED USING AS FEW PIECES AS POSSIBLE. NO GLUED OR BONDED SEAM SHALL ALIGN WITH ANY ASSET SHEAR PLANE.

5. TOLERANCES APPLY AT AMBIENT TEMPERATURE. TOLERANCE INCREASE IS ALLOWED WHEN TEMPERATURE VARIES PER

TOLERANCE TABLE (SEE SHEET 1, DWG. 20191700).

SEE DETAIL A

DETAIL A

SCALE 0.50

4X

DISTRIBUTION STATEMENT D : DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS

ONLY; ADMINISTRATIVE/OPERATIONAL USE; 18-MAY-2011. OTHER

REQUESTS SHALL BE REFERRED TO THE AIR FORCE PACKAGING

TECHNOLOGY & ENGINEERING FACILITY, DAYTON, OH 45433.

DESTRUCTION NOTICE : DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT

C

D

A

B

C

D

12345678

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT DPREVIOUS EDITION WILL BE USED

FORM

FEB 74 1655AF

QUANTITY REQUIRED PER DASH NO.

30.00

8.00

16.00

2X R1.00

8.13

24.00

2X 3.37

2X 3.72

2X 16.57

2X 14.02

2X 2.13 3.13

4.13

10.06

1.70

2.07

2X 2.60

5.40

8.36

1.63

2X 1.88

2X 2.50

4.63

6.26

4X R1.00

1.50

(10.06)

20191702

SIZE

FOAM, BASE, LOWER

CODE IDENT NO.

PARTS LIST

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES - TOLERANCES ON:

ANGLESDECIMALSFRACTIONS

MATERIALS:

POLYETHYLENE FOAM

A-A-59136

TYPE I, CLASS 4

GRADE A, COLOR BLACK

2.0 LBS/CU FT

20191700-1020191700-10

USED ONNEXT ASSEMBLY

APPLICATION

FIND NO.ZONEUNIT WTMATERIALS/SPECIFICATIONIDENTIFYING NO.CODE IDENTNOMENCLATURESYM

-01

NOTE:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5.

2. ALL CONVERSIONS FROM METRIC TO ENGLISH AND/OR ENGLISH TO METRIC UNITS SHALL BE IAW IEEE/ASTM SI 10.

FOAM MATERIAL MUST CONTAIN LESS THAN 10% OF LEL FLAMMABLE BLOWING AGENT BY VOLUME OF MATERIAL.

4. THE CUSHION DESIGN MUST BE MADE WITH ONE OR A COMBINATION OF THE FOLLOWING METHODS: HEAT-BONDED CUSHION PIECES, ADHESIVE BONDED CUSHION PIECES, OR ONE CONTINUOUS PIECE OF MATERIAL. THE CUSHION SHALL BE FABRICATED USING AS FEW PIECES AS POSSIBLE. NO GLUED OR BONDED SEAM SHALL ALIGN WITH ANY ASSET SHEAR PLANE.

5. TOLERANCES APPLY AT AMBIENT TEMPERATURE. TOLERANCE INCREASE IS ALLOWED WHEN TEMPERATURE VARIES PER

TOLERANCE TABLE (SEE SHEET 1, DWG. 20191700).

SEE DETAIL A

DETAIL A

SCALE 0.50

4X

SECTION B-B

SCALE 0.50

4X

DISTRIBUTION STATEMENT D : DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS

ONLY; ADMINISTRATIVE/OPERATIONAL USE; 18-MAY-2011. OTHER

REQUESTS SHALL BE REFERRED TO THE AIR FORCE PACKAGING

TECHNOLOGY & ENGINEERING FACILITY, DAYTON, OH 45433.

DESTRUCTION NOTICE : DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT CFORM

JUN 75 1654AF

B

A

C

D

B

A

C

D

PARTS LISTQUANTITY REQUIRED PER DASH NO.

3.00

26.33

32.33

2X 4.53

2X 17.73

2X 4.88

2X 15.18

4X 10.06

4X 6.26

8X 1.88

8X 2.50

4X 2.07

4X 5.40

8X 2.60

16X R0.50

4X 1.00

20191703

SIZE

FOAM, COVER

AIR FORCE AUTHENTICATION

CODE IDENT NO.

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

FIND NO.ZONEUNIT WTMATERIAL/SPECIFICATIONIDENTIFYING NO.CODE IDENTNOMENCLATURESYM

-01

APPLICATION

USED ONNEXT ASSEMBLY

20191700-1020191700-10

POLYETHYLENE FOAM

A-A-59136

TYPE I, CLASS 4

GRADE A, COLOR BLACK

2.0 LBS/CU FT

MATERIALS:

ANGLESDECIMALSFRACTIONS

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES - TOLERANCES ON:

NOTE:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5.

2. ALL CONVERSIONS FROM METRIC TO ENGLISH AND/OR

ENGLISH TO METRIC UNITS SHALL BE IAW IEEE/ASTM SI 10.

FOAM MATERIAL MUST CONTAIN LESS THAN 10% OF LEL

FLAMMABLE BLOWING AGENT BY VOLUME OF MATERIAL.

4. THE CUSHION DESIGN MUST BE MADE WITH ONE CONTINUOUS

PIECE OF MATERIAL.

5. TOLERANCES APPLY AT AMBIENT TEMPERATURE. TOLERANCE

INCREASE IS ALLOWED WHEN TEMPERATURE VARIES PER

TOLERANCE TABLE (SEE SHEET 1, DWG. 20191700).

4X 45 X 0.50

CHAMFER

4X 45 X 1.00

CHAMFER

SECTION A-A

DISTRIBUTION STATEMENT D : DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS

ONLY; ADMINISTRATIVE/OPERATIONAL USE; 18-MAY-2011. OTHER

REQUESTS SHALL BE REFERRED TO THE AIR FORCE PACKAGING

TECHNOLOGY & ENGINEERING FACILITY, DAYTON, OH 45433.

DESTRUCTION NOTICE : DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT

COMPUTER GENERATED, (PRO/ENGINEER, AFPTEF)ENGINEERING DRAWING LAYOUT CFORM

JUN 75 1654AF

B

A

C

D

B

A

C

D

PARTS LISTQUANTITY REQUIRED PER DASH NO.

A1.00

14.13

20191704

SIZE

FOAM, WALL

AIR FORCE AUTHENTICATION

CODE IDENT NO.

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

FIND NO.ZONEUNIT WTMATERIAL/SPECIFICATIONIDENTIFYING NO.CODE IDENTNOMENCLATURESYM

-01SIDE

-03FWD

-05AFT

APPLICATION

USED ONNEXT ASSEMBLY

20191700-1020191700-10

POLYETHYLENE FOAM

A-A-59136

TYPE I, CLASS 4

GRADE A, COLOR BLACK

2.0 LBS/CU FT

MATERIALS:

ANGLESDECIMALSFRACTIONS

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES - TOLERANCES ON:

TABLE

DASH NO. A

20191704-01 30.67

20191704-03 24.00

20191704-05 8.00

NOTE:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5.

2. ALL CONVERSIONS FROM METRIC TO ENGLISH AND/OR

ENGLISH TO METRIC UNITS SHALL BE IAW IEEE/ASTM SI 10.

FOAM MATERIAL MUST CONTAIN LESS THAN 10% OF LEL

FLAMMABLE BLOWING AGENT BY VOLUME OF MATERIAL.

4. THE CUSHION DESIGN MUST BE MADE WITH ONE CONTINUOUS

PIECE OF MATERIAL.

5. TOLERANCES APPLY AT AMBIENT TEMPERATURE. TOLERANCE

INCREASE IS ALLOWED WHEN TEMPERATURE VARIES PER

TOLERANCE TABLE (SEE SHEET 1, DWG. 20191700).

45 X 0.50

CHAMFER

DISTRIBUTION STATEMENT D : DISTRIBUTION AUTHORIZED TO

THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS

ONLY; ADMINISTRATIVE/OPERATIONAL USE; 18-MAY-2011. OTHER

REQUESTS SHALL BE REFERRED TO THE AIR FORCE PACKAGING

TECHNOLOGY & ENGINEERING FACILITY, DAYTON, OH 45433.

DESTRUCTION NOTICE : DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT

ENGINEERING DRAWING LAYOUT B(PRO/ENGINEER, AFPTEF) COMPUTER GENERATEDPREVIOUS EDITIONS WILL BE USED.

FORM

AUG 72 1653AF

A

B

C

D

A

B

C

D

QUANTITY REQUIRED PER DASH NO. PARTS LIST

5.50

3.50

4X R0.38

1OF1SHEET1.00

SCALE

20191705

DRAWING NO.A.F. CODE IDENT NO.

SIZE

PLATE, IDENTIFICATION

CODE IDENT NO.

REVISIONS

APPROVEDDATEDESCRIPTIONLTR

FIND NO.ZONEUNIT WTMATERIAL/SPECIFICATIONIDENTIFYING NOCODE IDENTNOMENCLATURESYM

-01

APPLICATION

USED ONNEXT ASSEMBLY

20191700-1020191700-10

MATERIALS:

.XX

.XXX

0.03 0.015

0.5

FRACTIONS DECIMALS ANGLES

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON

NOTES:

1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5.

2. ALL CONVERSIONS FROM METRIC TO ENGLISH AND/OR

ENGLISH TO METRIC UNITS SHALL BE IAW IEEE/ASTM SI 10.

ALL CHARACTERS SHALL BE CENTERED AND VISUALLY

BALANCED AS SHOWN.

OUTLINED BOXES SHALL BE SUBSTITUTED WITH THE

APPROPRIATE DATA PRIOR TO MANUFACTURE.

PLATE SHALL BE A 0.004 IN THICK ADHESIVE BACKED

ALUMINUM FOIL PER MIL-DTL-19834, TYPE 1, WHITE OR

SILVER BACKGROUND WITH BLACK GOTHIC STYLE LETTERING.

6. UNLESS OTHERWISE NOTED, PLATE SHALL BE IAW

MIL-STD-130.

INSERT 2-D BAR CODED CAGE CODE, PART NUMBER, AND SERIAL

NUMBER. BAR CODING SHALL COMPLY WITH MH10.8.3M FORMAT

OF ISO/IEC 15434 AND ISO/IEC 15418. BAR CODING MODULE SIZE SHALL

BE NO SMALLER THAN 0.020 IN AND NO LARGER THAN 0.025 IN. OVERALL

BARCODE SIZE SHALL BE BETWEEN THE RANGE OF 0.40 IN TO 0.75 IN.

THE BARCODE SHALL BE BLACK BARS ON WHITE OR SILVER BACKGROUND.

0.20 CHARACTERS

ALL OTHERS 0.12

DISTRIBUTION STATEMENT D : DISTRIBUTION

AUTHORIZED TO THE DEPARTMENT OF DEFENSE

AND U.S. DOD CONTRACTORS ONLY;

ADMINISTRATIVE/OPERATIONAL USE;

18-MAY-2011. OTHER REQUESTS SHALL BE

REFERRED TO THE AIR FORCE PACKAGING

TECHNOLOGY & ENGINEERING FACILITY,

DAYTON, OH 45433.

DESTRUCTION NOTICE : DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT

3 7