Data_Sheet___KOLD-FLO__Crack_Filler___203.110_.pdf

PDF 483 KB Posted

Attached to
Competitive Selection OH|DOT101L26-13
Contract number
DOT101L26-13
Issued by
Ohio

About this file

This document is a technical data sheet for KOLD-FLO® Pourable Crack Filler, produced by UNIQUE Paving Materials Corporation located in Cleveland, Ohio. The document provides detailed product specifications, recommended uses, application instructions, and packaging information for a specialized asphalt and concrete pavement maintenance product.

The KOLD-FLO® Crack Filler is a Gilsonite-modified asphalt emulsion designed to seal cracks and joints on paved surfaces from hairline to 1-inch wide. The product is available in multiple packaging sizes, including 1-gallon bottles, 5-gallon pails, 55-gallon drums, and 275-gallon totes, with specific truckload quantities outlined. Key features include application on damp pavement, minimal preparation requirements, and compatibility with various surface types. The product has a 6-month shelf life, requires 12-24 hours curing time before traffic use, and comes with coverage estimates based on crack width and depth. The data sheet also includes storage instructions, safety precautions, and a limited warranty from the manufacturer.

View the file

Other files

File Type Posted
Data_Sheet__UNIQUE_Concrete_Crack_Filler.pdf PDF
Data_Sheet___KWIK-LOK__Pavement_Primer__203.156_.pdf PDF
SDS_INTEGRA-SEAL_Asphalt_Sealer.pdf PDF
SDS_KWIK-LOK_Pavement_Primer.pdf PDF
SDS_UNIQUE_Clear_Conrete_Sealer.pdf PDF
UNIQUE_Asphalt_Resurfacer_-_Sell_Sheet__303.307___002_.pdf PDF
101L__26__recommend.pdf PDF
Data_Sheet___INTEGRA_SEAL__Asphalt_Sealer__203.139_.pdf PDF
SDS_UNIQUE_Concrete_Crack_Filler.pdf PDF
UPM_Mix_-_Sell_Sheet__303.303___002_.pdf PDF
1-101LPricing_26__03_21_25_FINAL.xls XLS spreadsheet
1-Affirmation_and_Disclosure_Form.pdf PDF
Data_Sheet__KWIK-LOK_Pavement_Primer__203.156___002_.pdf PDF
Data_Sheet__UNIQUE_Asphalt_Resurfacer__203.158___002_.pdf PDF
SDS_UPM_Liquid_Blend__Above_Ambient_.pdf PDF
Signature__4___1___002_.pdf PDF
Specification__SS-1h_Asphalt_Emulsion.pdf PDF
Specification__SS-1h_Asphalt_Emulsion__203.128___002_.pdf PDF
UNIQUE_Concrete_Pourable_Crack_Filler_-_Sell_Sheet__303.308___002_.pdf PDF
UNIQUE_Concrete_Sealer_-_Sell_Sheet__303.325___003_.pdf PDF
Data_Sheet__UNIQUE_Concrete_Sealer.pdf PDF
SDS_KOLD-FLO_Pourable_Crack_Filler.pdf PDF
101L-26.pdf PDF
SDS_UNIQUE_Asphalt_Resurfacer.pdf PDF
Specification__UPM_Liquid_Asphalt_Blend__203.107___002_.pdf PDF
Show all 25

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Form 203.110 (06-2021) Page 1

Another Quality Product Available From UNIQUE 3993 East 93rd Street Cleveland, OH 44105 800-441-4880 www.uniquepavingmaterials.com

Data Sheet – KOLD-FLO® Crack Filler Pourable Emulsion Crack Filler

Product Description KOLD-FLO® Pourable Crack Filler is a Gilsonite modified asphalt emulsion crack filler designed for maintenance of asphalt and concrete pavements. KOLD-FLO crack filler is formulated with special polymers and additives to seal out water, protect, and preserve asphalt and concrete pavements.

Recommended Uses Use KOLD-FLO crack filler to fill cracks and joints on any paved asphalt or concrete surface including driveways and parking lots. KOLD-FLO crack filler should be applied to cracks from hairline to 1” wide. Use other UNIQUE pavement preservation and repair products for larger crack and joint repairs.

Benefits / Features

Signature grade Gilsonite modified asphalt emulsion based formula

Asphalt based and free of coal tar

Can be applied to damp pavement

Cost effective

Minimum preparation required

Easy & Safe to apply

Passes FAA P-625 Fuel Resistance Test

Excellent adhesion to pavement surfaces

Reduced traffic delays

Limitations KOLD-FLO crack filler should not be applied when the ambient temperature is expected to drop below 50°F or rain is expected within 24 hours following application. Surface must be clean and free of all loose material and dirt.

Surface Determination Why has the pavement failed? Is there presence of freezing damage or undermining? The area to be repaired should be in sound condition. Add clean sand or backer rod to areas with observable excessive undermining.

Mixing Some separation/settling may occur over time. Stir KOLD- FLO pourable crack filler to achieve a consistent mixture.

Surface Preparation Clean out debris from the cracks so that KOLD-FLO crack filler can completely fill the damaged area.

Sub-surface Preparation Be sure no undermining of the pavement base has occurred. Undermining can be severe and require backfilling before any application of KOLD-FLO crack filler.

If there is presence of undermining, fill the crack partly with clean sand or backer rod. KOLD-FLO crack filler fills from bottom to top. If undermining has occurred and not filled or isolated with backer rod, additional KOLD-FLO crack filler may be required to fill the undermining and the crack.

KOLD-FLO crack filler will continue to flow into undermine until filled. Continue to apply KOLD-FLO crack filler until crack is level full.

Placement Surface should be dry or Saturated Surface Dry (SSD) and free of any standing water. KOLD-FLO crack filler can be applied directly from the container or with automated applicator equipment like UNIQUE’s CRACK-N-TACK® portable pump. Pour or pump KOLD-FLO crack filler into the crack ¾ of the length. Allow a few minutes for KOLD- FLO crack filler to seep completely down into the crack.

Push KOLD FLO crack filler into the remaining crack length using a “U’ or “V” shaped squeegee.

Multiple coats may be applied for deeper and undermined areas. If KOLD-FLO crack filler continues to sink in undermined areas of the crack, add additional clean sand and KOLD-FLO (Allow 1-2 hours curing time between coats).

Coverage One gallon of KOLD-FLO pourable crack filler will cover approximately:

WIDTH x DEPTH

LINEAR

FEET

LINEAR

METERS

1/4" (6MM) x 1/4" (6MM) 300 92

1/2" (13MM) x 1/2" (13MM) 75 23

1" (25MM) x 1" (25MM) 25 8 http://www.uniquepavingmaterials.com/

Form 203.110 (06-2021) Page 2

Another Quality Product Available From UNIQUE 3993 East 93rd Street Cleveland, OH 44105 800-441-4880 www.uniquepavingmaterials.com

Curing Final cure time prior to opening to traffic should be 12-24 hours. Cure time will vary due to ambient conditions.

Storage Keep from freezing.

Shelf Life 6 months in unopened containers.

Packaging

Item # Description

80-00007 KOLD-FLO® Crack Filler Bottle 1-gal (8.05#) 144 (8.05#) bottles (pkg 4 /box) per stretch wrapped pallet 4,032 (8.05#) bottles per truckload

80-00008 KOLD-FLO® Crack Filler Pail 5-gal (38#) 36 (38#) pails per stretch wrapped pallet 1,008 (38#) pails per truckload

80-00009 KOLD-FLO® Crack Filler Drum 55-gal (440#) 4 (440#) drums per stretch wrapped pallet 88 (440#) drums per truckload (with pallets) 96 (440#) drums per truckload (no pallets)

80-00010 KOLD-FLO® Crack Filler Tote 275-gal (1,760#) 1 (1,760#) tote per pallet 20 (1,760#) totes per truckload

Truckload quantities are typical but may vary depending on destination, truck tare weight and/or trailer type (box van, flat bed, rail shipments or ocean freight container).

Caution:

This product contains petroleum derived and various chemicals to enhance performance. Refer to SDS for details. Avoid skin contact and use appropriate safety equipment, suggested but not limited to approved safety glasses and gloves. In case of contact with eyes, immediately flush with water for at least 15 minutes and seek medical attention. DO NOT TAKE INTERNALLY. Keep out of reach of children. Avoid prolonged contact with clothing. Avoid hazards by following all precautions found in the Safety Data Sheet. Please read this information prior to using product.

Limited Warranty:

UNIQUE Paving Materials Corporation (UNIQUE) warrants that at the time and place we make shipment our materials will be of good quality and will conform with our published specifications in force on the date of acceptance of the order. THE FOREGOING WARRANTY SHALL BE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED. WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES OTHERWISE ARISING BY OPERATION OF LAW, COURSE OF DEALING, CUSTOM OR TRADE OR OTHERWISE ARE SPECIFICALLY DISCLAIMED. As the exclusive remedy for breach of this warranty, we will replace defective materials, provided, however, that the buyer examines the material when received and promptly notifies us in writing of any defect before the materials are used or incorporated into structure. Three (3) months after UNIQUE has shipped the materials, all our warranty and other duties with respect to the quality of the materials delivered shall conclusively be presumed to have been satisfied, all liability therefor terminates, and no action for breach of any duties may thereafter be commenced. UNIQUE shall in no event be liable for consequential damages. No warranty is made with respect to materials not manufactured by UNIQUE.

KOLD-FLO® is a registered trademark of UNIQUE Paving Materials Corp.

http://www.uniquepavingmaterials.com/

File details come from the government source that posted it. Updated .