D.1 WAGE DETERMINATION - SAN DIEGO COUNTY 02-16-22 02.docx

D.1 WAGE DETERMINATION – San Diego County

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

If the contract is entered into on or after January 30 2022 or the contract is renewed or extended (e.g. an option is exercised) on or after January 30 2022 Executive Order 14026 generally applies to the contract. The contractor must pay all covered workers at least $15.00 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on that contract in 2022.

If the contract was awarded on or between January 1 2015 and January 29 2022 and the contract is not renewed or extended on or after January 30 2022 Executive Order 13658 generally applies to the contract. The contractor must pay all covered workers at least $11.25 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on that contract in 2022.

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: California

Area: California County of San Diego

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

32.62

30.88

15.87

17.32

22.14

18.35

2/16/22, 8:23 AM

SAM.gov https://sam.gov/wage-determination/2015-5635/18 10/12

05000 - Automotive Service Occupations

07000 - Food Preparation And Service Occupations

09000 - Furniture Maintenance And Repair Occupations

11000 - General Services And Support Occupations

111240

- Maid or Houseman 14.78 11260

- Pruner

13.93 11270

- Tractor Operator 17.90 11330

- Trail Maintenance Worker 15.29 11360

- Window Cleaner

18.13 2000 - Health Occupations 12010 - Ambulance Driver 18.34 12011

- Breath Alcohol Technician 26.93 12012

- Certified Occupational Therapist Assistant 35.43 12015

- Certified Physical Therapist Assistant 34.67 12020

- Dental Assistant 21.55 12025

- Dental Hygienist 51.32 12030

- EKG Technician 38.32 12035

- Electroneurodiagnostic Technologist 38.32 12040

- Emergency Medical Technician 18.34

12305 - Radiologic Technologist 43.34

- Scheduler (Drug and Alcohol Testing) 33.02 12320

- Substance Abuse Treatment Counselor 21.50 3000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.96 13012

- Exhibits Specialist

II

27.20 13013

- Exhibits Specialist

III

33.28 13041

- Illustrator I

23.23 13042

- Illustrator II

28.78 13043

- Illustrator III

35.20 13047

- Librarian

35.87 13050

- Library Aide/Clerk

16.56 13054

- Library Information Technology Systems 32.38 Administrator 13058 Library Technician 20.85 13061

- Media Specialist I 23.37 13062

- Media Specialist

II

26.14 13063

- Media Specialist

III

29.14 13071

- Photographer I

19.59 13072

- Photographer II

21.93 13073

- Photographer III

27.17 13074

- Photographer IV

33.22 13075

- Photographer V

40.20

14000 - Information Technology Occupations 14041 - Computer Operator I 20.59

114042

- Computer Operator II

23.03 14043

Operator III

25.67 14044

Operator IV

28.53 14045

Operator V

31.59 14071

- Computer Programmer I

(see 1)

14072

- Computer Programmer II

(see 1)

14073

- Computer Programmer III

(see 1)

14074

- Computer Programmer IV

(see 1)

14101

- Computer Systems Analyst I (see 1)

14102

- Computer Systems Analyst

II

(see 1)

14103

- Computer Systems Analyst

III

(see 1)

14150

- Peripheral Equipment Operator 20.59 14160

- Personal Computer Support Technician 28.53 14170

- System Support Specialist 34.56 5000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 31.62 15020

- Aircrew Training Devices Instructor (Rated) 38.26 15030

- Air Crew Training Devices Instructor (Pilot) 45.86 15050

- Computer Based Training Specialist Instructor 31.62 15060

- Educational Technologist

36.14 15070

- Flight Instructor (Pilot)

45.86 15080

- Graphic Artist

27.50

16000 - 16010

16160 - Presser Machine Wearing Apparel Laundry 15.31

18.96

21.90

26.00

26.00

14.87

15.33

17.24

21130 - Shipping/Receiving Clerk 17.24

14.58

19.05

28.18

30.00

23091 - Aircrew Life Support Equipment (ALSE) Mechanic I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 30.00

33.64

II

23110 - Appliance Mechanic

23.50

23410 - Heating Ventilation And Air-Conditioning Mechanic 23411 - Heating Ventilation And Air Contidioning 29.66

30.80

Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic

29.47

Coordinator

28.30

28.48

31.29

34.56

20.42

22.84

25.47

31.34

20.77

23.31

26.07

32.30

39.50

47.80

25.64

28.26

23.32

33.63

30375 - Petroleum Supply Specialist

34.55

30390 - Photo-Optics Technician

28.30

30395 - Radiation Control Technician

34.56

30461 - Technical Writer I

28.05

30462 - Technical Writer II

34.31

30463 - Technical Writer III

41.52

30491 - Unexploded Ordnance (UXO) Technician I

28.65

30492 - Unexploded Ordnance (UXO) Technician II

34.67

30493 - Unexploded Ordnance (UXO) Technician III

41.55

30494 - Unexploded (UXO) Safety Escort

28.65

30495 - Unexploded (UXO) Sweep Personnel

28.65

30501 - Weather Forecaster I

31.29

30502 - Weather Forecaster II

38.07

Surface Programs

34.67

16.57

22.21

18.18

13.49

17.95

15.95

19.53

21.91

23.55

23.55

16.90

13.56

14.68

24.43

28.65

16.45

17.66

30.03

24.43

18.99

21.35

26.40

31.57

24.57

14.73

20.28

32.22

21.05

29.30

14.19

16.90

14.09

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.60 per hour up to 40 hours per week or $184.00 per week or $797.33 per month

HEALTH & WELFARE EO 13706: $4.23 per hour up to 40 hours per week or $169.20 per week or $733.20 per month*

*This rate is to be used only when compensating employees for performance on an SCA- covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S. Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."