Control Speadsheet Vertical Turning Centers Spec 05-20-3416 .xlsx
XLSX spreadsheet 20 KB Posted
- Attached to
- 4-Axis Vertical Turning Centers Federal contract opportunity
- Solicitation number
- W911PT-21-Q-0037
About this file
This document includes a federal contract opportunity solicitation for the procurement of two new 4-axis CNC vertical turning centers and the related equipment specification. The solicitation was issued by the Department of the Army Materiel Command Contracting Command Detroit Arsenal as number W911PT-21-Q-0037. The opportunity seeks turnkey delivery of two 4-axis vertical turning centers per the specification requirements outlined in an attached equipment specification document. Offerors must meet all requirements and features listed in the control system spreadsheet attachment. Delivery is required FOB destination within 360 days of contract award. Interested parties should periodically check the Beta SAM website for any amendments to the solicitation prior to the response deadline in order to submit a compliant offer.
The related equipment specification attachment provides a detailed control system requirements spreadsheet for vendors to indicate compliance with over 100 features and capabilities for the CNC controls on the required vertical turning centers.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| W911PT-21-Q-0037-0002 released.docx | DOCX document | |
| W911PT-21-Q-0037-P00001.pdf | ||
| WVA Equipment Engineering Specification REVISION A 5-20-3416 Vertical Turning Centers 16 Sep 2021.docx | DOCX document | |
| W911PT-21-Q-0037 WVA Vertical Turning Centers (released).docx | DOCX document | |
| Comply Sheets Vertical Turning Centers Spec 05-20-3416 .xlsx | XLSX spreadsheet | |
| WVA_Equipment_Enginering_Specification.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Control Comparison
| Directions: | ||||
| 1.) Each vendor must use the spreadsheet below for the input requested. | ||||
| 2.) This spreadsheet contains the final requirements for the control system being offered. It is mandatory that each vendor quotation/proposal include all of the features/capabilities listed. GE Fanuc part numbers were provided where known. Features/capabilities crossed out have been removed from the requirements. | ||||
| 3.) Use this spreadsheet and indicate with an "X" under "Vendor Input" to confirm your understanding that the feature/capability/option will be provided with the system being provided. | ||||
| 4.) Please note that failure to provide all the requirements listed will classify your proposal as unacceptable. | ||||
| 5. Please read carefully because some terminology may have been changed. | ||||
| Fanuc Option # | Vendor Input | Vendor Input | Comments |
| Control Being Offered | ||
| Use of Undefined Variables in Part Programs | ||
| Use of Assigned Variables in Part Programs | ||
| Math Operators in Part Programs | ||
| Boolean Operators in Part Programs | ||
| Math Functions in Part Programs | ||
| If, GoTo, Do, While | ||
| Change/Retrieve Table Data | ||
| Contour Cycles (G70 - G76) (Multiple Repetative Canned Cycles) | J877 | |
| Interrupt Program, Move Axes to Adjust Offsets | S825 | |
| Presets G92, G50 | ||
| Digital Servo Interface | J800 | |
| RS232 port and Ethernet ports | ||
| Retract During Threading | J825 | |
| Retrace Tool Path (Run Program Backwards) - (Manual Handle Retrace) | J998 | |
| Part Program Storage (2MB minimum) + 1000 stored part programs | J948 & J953 | |
| External Data Input | J913 | |
| 200 Tool Offsets | J927 | |
| Programmable Data Input (G10) | J872 | |
| Manual Handle Interruption Feed | J837 | |
| Manual Guide I | N/A | |
| Additional Custom Macros | J887 | |
| Color Graphics - (Graphics Display) | J972 | |
| 3rd axis - (For Tool Changer) | J801 | |
| Axes Synchronous Control | J843 | N/A |
| Special G Code Input | J871 | |
| Interruption for Custom Macro | J874 | |
| Multiple Repetitive Canned Cycles - (G70-G76) | J889 | |
| Coordinate System Rotation | J893 | |
| PMC w/ 112k Steps | ||
| Spindle Interface – Serial | J850 | |
| Actual Spindle Speed Output | J856 | |
| Tool Life Management | J935 | |
| Automatic Tool Compensation | J932 | |
| Separate Type MDI (61 Keys) | ||
| Restart of Automatic Operation | J838 | |
| Automatic Tool Offset G36/G37 | ||
| Work Coordinate System Shift | J894 | |
| Manual Intervention and Return | ||
| HSSB | ||
| Ladder Edit for HSSB Function | J820 | |
| Axis Control by PMC | J804 | |
| Operator’s Panel 520mm | S656 | |
| Tool Offset Memory C | J937 |
| Par. 3.3.1 | ||
| Abs./Inc. Programming | ||
| Leading Zero Omission | ||
| Decimal Point Programming Input | ||
| Program Resolution .0001” min. | ||
| Single Block Mode | ||
| Program/Option Stop | ||
| Programmed Operator Messages | ||
| Mult G and M Codes in Same Block | ||
| Optional Block Skip | ||
| Program Rewind | ||
| Linear Interpolation | ||
| Circular Interpolation | ||
| Rapid Traverse | ||
| Inch/Metric Switchable Conversion | J876 | |
| Dry Run (With & Without Axes Inhibit) | ||
| Canned Cycles | J878 | |
| Threading-Constant Lead & Taper (Continuous) | J826 | |
| Threading-Variable Lead | J827 | |
| Threading-Multiple Start | ||
| Threading-Threads per Inch | ||
| FPR, FPM Programming | ||
| Dwell-Time Based | ||
| Dwell-Revolution Based | ||
| Coordinate System-Machine (G52-G59) | J894 | |
| Coordinate System-Work offset 48 pairs | J895 | |
| Program Edit-Foreground/Background | ||
| Corner Rounding/Chamfer | J875 | |
| Direct RPM Spindle Speed Programming | ||
| Mirror Image Programming | ||
| Subroutines w/ Mult Level Nesting | ||
| Custom Macros | J873 | |
| Stroke Checks - 2/3 Stroke Checks | J840 | |
| Stored Limit Checks Before Move | J749 | |
| Tool Identifier | ||
| Tool Pocket Identifier | ||
| Tool Geometry & Wear Tool Offsets/ Compensation-Tool Radius (200 pairs) | J931 | |
| Tool Offsets/ Compensation - Fixture | ||
| Additional Work Coordinate system, 48 Pairs (Mills) | J895 | |
| Tool Life Management | J935 | |
| Horsepower Monitoring | ||
| iAdapts Adaptive Control with CD & Manual | S898 | N/A |
| Macro Executor & C-language Executor 700K reserved for system S/W | J734 for iadapt | N/A |
| Custom Software Size 2MB | J738#2M | |
| Programmable Safe Zones (Same as stored stroke check) | J840 | |
| Tool Retract and Retrace - (Tool Retract & Recover) | J823 | |
| Program Delete from System Memory | ||
| Inverse Time Feed | J715 | |
| Constant Surface Speed | J855 | |
| Presets G92, G50 | ||
| Program Restart | J838 | |
| Plus and Minus Programming on Linear & Rotary Axes | ||
| Max. Feedrates Capable of: Rapid – Min. current capabilities | ||
| Max. Feedrates Capable of: Point to Point - Min. current capabilities | ||
| Max.Feedrates capable of: Contour – Min. current capabilities | ||
| Feedback Resolution-Linear Axis: .0001" | ||
| Feedback Resolution-Rotary Axis: .001 degree | ||
| Compensation Tables-Backlash | ||
| Compensation Tables-Pitch Error Comp. (BiDirectional) | S656 | |
| Interpolation Type Straightness Compensation (128) | S639 | |
| Position Display-Relative | ||
| Position Display-Absolute | ||
| Position Display-Machine | ||
| Position Display-Distance to Go | ||
| Position Display-Following Error | ||
| Coordinate System Display Edit-Machine | ||
| Coordinate System Display Edit-Work | ||
| Tool Offset Display/Edit-Length | ||
| Tool Offset Display/Edit-Radius | ||
| Machine Status Display-Feedrate | ||
| Machine Status Display-Feedrate Override | ||
| Machine Status Display-Spindle Rate | ||
| Machine Status Display-Spindle Speed Override | ||
| Machine Status Display-Real Time PLC Error Reporting | ||
| Parameter Display/Edit | ||
| Message Display-Active M,G,S,T,D,H Codes | ||
| Program Display-Axis Position | ||
| Program Display-Program Line Number | ||
| Program Display-Program Name | ||
| Program Display-Subroutine Line Number | ||
| Program Display-Subroutine Name | ||
| Program Display-Programmed Spindle Speed and Feedrate | ||
| Program Loading/Storage (2MB storage minimum) | ||
| Fast Data server and Data server buffer mode | S737 | |
| Program Check (With or Without Axes Inhibited) | ||
| Data Protection | ||
| Clock Function | ||
| Self-Diagnostic Functions | ||
| PLC/System Software Display-Ladder Logic | ||
| Spindle Load Meter/Horsepower Display | ||
| Program Sequence Number Search | ||
| Help Functions | ||
| Operation Modes-Manual | ||
| Operation Modes-MDI | ||
| Operation Modes-Auto | ||
| Operation Modes-Edit | ||
| Axis Select | ||
| Axis Jog +/- : Continuous | ||
| Axis Jog +/- : Incremental | ||
| Feedrate Override | ||
| Rapid Override | ||
| Spindle Control-CW | ||
| Spindle Control-CCW | ||
| Spindle Control-Off | ||
| Spindle Control-Neutral | ||
| Spindle Jog | ||
| Spindle Orient/Program In Degrees | J853 | |
| Spindle Speed Override | ||
| Feedhold | ||
| Cycle Start | ||
| Cycle Stop | ||
| E-Stop | ||
| Home Axis | ||
| Single Block | ||
| Option Stop | ||
| Tool Chain +/- | ||
| Tool Engage/Release | ||
| Return Jog | ||
| Overtravel Override Capability | ||
| Manual Pulse Generator (MPG) | ||
| Number Axes | ||
| Maximum Feedrates | ||
| Lamp Test Pushbutton | ||
| Servo Tuning | ||
| Coordinate System Definition | ||
| Following Error Limits | ||
| Axis Inhibit | ||
| Tandem Axis Control | J733 | |
| Dual Position Feedback | J704 | |
| Bell Shaped Acc/Dec After Interpolation for cutting Feed | J829 |
| Panel-I Open Face PC | N/A |
| Core 2 DUO 2.26 GHZ | N/A |
| 64 GB Solid State Drive (SSD) | N/A |
| 4 GB RAM | N/A |
| CD-RW Drive | |
| 10 Base-T Ethernet Card | S707 |
| RS-232 | |
| Hulapoint Pointing Device | |
| QWERTY Horizontal Keyboard | |
| 15" Fanuc Panel i LCD with Softkey, Touch Panel and Protected Cover | |
| Operating System Windows XP Latest Edition & SPs | B413 |
| Uninterrupted Power Supply (UPS) | B413 |
Attachment 1 FY21 New 4-Axis Vertical Turning Center Spec. #5-20-3416
File details come from the government source that posted it. Updated .