Attachment 0004 - DD254_29 July 2021.pdf

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

b. LEVEL OF SAFEGUARDING REQUIRED

2. THIS SPECIFICATION IS FOR: (X and complete as applicable)

a. PRIME CONTRACT NUMBER

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable)

a. ORIGINAL (Complete date in all cases)

REVISION NO.

c. FINAL (Complete Item 5 in all cases)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specs)

DATE (YYYYMMDD)

DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If Yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If Yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10. CONTRACTOR WILL REQUIRE ACCESS TO: 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL:YES NO YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION

b. RESTRICTED DATA

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION

d. FORMERLY RESTRICTED DATA

e. INTELLIGENCE INFORMATION

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

f. SPECIAL ACCESS INFORMATION

g. NATO INFORMATION

h. FOREIGN GOVERNMENT INFORMATION

i. LIMITED DISSEMINATION INFORMATION

j. FOR OFFICIAL USE ONLY INFORMATION

k. OTHER (Specify)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE TEMPEST REQUIREMENTS

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

l. OTHER (Specify)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE. Adobe Professional X

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release

a. TYPED NAME OF CERTIFYING OFFICIAL

Direct Through (Specify)

d. ADDRESS (Include Zip Code)

Yes No to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract.

(If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Yes No15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office.

(If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

b. TITLE c. TELEPHONE (Include Area Code)

e. SIGNATURE

17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

The location of contractor work is still TBD at this point, since this Intel Apps is still in a pre-solicitation phase and a contractor has not yet been officially identified. The first DD254 is intended to complete the Acquisition Requirements Package (ARP). A final DD254 is still pending.

The All Source II software capability requirements address the need to modernize and enhance the capabilities of Army’s intelligence at the tactical echelons. The contractor’s solution shall meet the capabilities called out in the Performance Requirement Documentation (PRD). The Contractor’s All Source II software capability is intended to be hosted in the Command Post Computing Environment (CPCE) Tactical Server Infrastructure (TSI).

The All Source II software capability shall align with multiple overarching directives, to include the Army’s Common Operating Environment (COE). The All Source II software capability shall support net-centric military operations by being interoperable with current Army, Unified Action Partners, Joint Service, Allied, Coalition, and Command and Control information and ISR systems. ALL SOURCE 2 shall operate across the Secure Internet Protocol Router Network (SIPRNet), Secret Coalition Networks, and Unclassified security domains, and within and across all COE computing environments.

6006 Combat Drive, 2nd Floor, Room B2 Aberdeen Proving Ground, MD 21005