Advantor Upgrade for Program Office Work.docx

Advantor Upgrade for Program Office

Access Control Refresh

· Upgrade SF/Xi to SF/Xi6.2 with badging, including new report printer, badging printer, switch and

· firewall.

· Upgrade panels 5001, 5002 & 5003 to IG2 FIPS panels.

· Remove Main Entry 140 from 5002 and cap with plate.

· Remove ECC 1 Rm 131 from 5003 and cap with plate.

· Replace all existing card readers (now Prox/Pro) with HID RPK40 readers.

IDS Refresh

· Upgrade IDS panels in Program Office area with IG2 FIPS panels.

· Provide and install ITK keypads to replace TSK Keypads (2 total).

· Replace all motion sensors with AP669 sensors.

· Replace perimeter BMS with HSS

· Perform turnkey installation of all components, including all necessary conduit and wiring.

· Wire above ceilings will be installed on J-hooks or in cable trays.

· Wire below ceilings will be in EMT Conduit.

· Conduct Contractor Verification Testing and commission system into service.

· Provide software instruction on SF/Xi6 system, including enrollment, schedule set up and system administration.

· Provide as-built drawings of final configuration, including device placement and wire paths.

The Government will provide the following collateral support:

· Provide storage and staging space for project materials.

· Provide access to work areas in conformance with pre-arranged installation schedule.

· Provide AutoCAD floor plans as necessary for creation of as-built drawing.

· Provide access to 120VAC power for all components requiring AC Power (Advantor to perform power connections.)

· *All electrical work to be performed by a licensed electrician