E7005-2_SIK - Fencing Plan (7-6-21).pdf

74 KB Posted

Attached to
Sikeston Fencing Project
Solicitation number
89503621BSW000022
Issued by

About this file

Written by GovTribe AI ·

This document contains a technical drawing and related federal contract opportunity. The technical drawing provides construction details for replacing security fencing at the Sikeston Substation located in Sikeston, Missouri. Specifically, it calls for completely removing the existing chain-link fence and installing a new electrically grounded chain-link fence that is eight feet high and includes six barbed wires, concertina wire, one-inch wire mesh fabric, and non-motorized cantilever slide gates with ISP security latches.

The related federal contract opportunity is solicitation number 89503621BSW000022 from the U.S. Department of Energy Southwestern Power Administration. It intends to issue an Invitation for Bid to perform the fencing replacement project described in the technical drawing. The work will replace the Sikeston Substation fencing located at the specified address in Sikeston, Missouri.

View the file

Other files

File Type Posted
Bid Opening Abstract of Offers 072921.pdf PDF
Announcement to Bidders Conference Call.pdf PDF
1 Additional Pre-bid RFI and Answer.pdf PDF
Davis-Bacon Act_WD MO20210001_Rev 8_07092021.pdf PDF
Amendment 3_Sol_89503621BSW000022_071521.pdf PDF
New Front Entrance Gate Ground Connection.jpg JPG image
E7005_SIK - Fencing Plan (7-14-21).pdf PDF
Site Visit Pre Bid Sign in signed.pdf PDF
Geotechnical Report - Sikeston Substation.pdf PDF
Amendment 2_Sol_89503621BSW000022_070921.pdf PDF
Staging Areas Available.jpg JPG image
Pre-bid RFIs and Answers.pdf PDF
Section C_89503621BSW000022 w_Revision 1 071421.pdf PDF
E3202_SIK - Fence Grounding Details (7-14-21).pdf PDF
Amendment 1_Sol_89503621BSW000022_070921.pdf PDF
Sol_89503621BSW000022_060421_Final.pdf PDF
Drawings - Sikeston Substation Fencing Replacement.pdf PDF
Davis-Bacon Act WD MO20210022 04232021.pdf PDF
Show all 18

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AutoCAD SHX Text

CHKD

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

REV

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

SUBMITTED

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DRAWING NUMBER

AutoCAD SHX Text

FILE NAME

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF ENERGY

AutoCAD SHX Text

SOUTHWESTERN POWER ADMINISTRATION

AutoCAD SHX Text

TULSA, OKLAHOMA

AutoCAD SHX Text

A1ASL201

AutoCAD SHX Text 36 x 24

AutoCAD SHX Text Reference Old drawing number:

AutoCAD SHX Text Border name:

AutoCAD SHX Text Size:

AutoCAD SHX Text 1031-E7005-2

AutoCAD SHX Text E7005-2

AutoCAD SHX Text

AutoCAD SHX Text

SIKESTON SUBSTATION

AutoCAD SHX Text

SECURITY FENCE DETAILS

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

JGC

AutoCAD SHX Text

JGC

AutoCAD SHX Text

JGC

AutoCAD SHX Text

JGC

AutoCAD SHX Text

AutoCAD SHX Text

FENCING REPLACEMENT

AutoCAD SHX Text

JGC

AutoCAD SHX Text 07-21

AutoCAD SHX Text

JGC

AutoCAD SHX Text 07-21

AutoCAD SHX Text

4" X 24' FENCE POST

AutoCAD SHX Text

TOP OF CRUSHED

AutoCAD SHX Text

ROCK SURFACING

AutoCAD SHX Text %%uSECURITY FENCE FOOTINGS

AutoCAD SHX Text

17.3 Cu. Ft. CONCRETE PER FTG.

AutoCAD SHX Text

%%UFOOTING FOR

AutoCAD SHX Text

%%U4" X 24' FENCE POST

AutoCAD SHX Text

DIA.

AutoCAD SHX Text

FILL WITH CONCRETE

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text NOTE: NOTE: 1. A TOTAL OF EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL A TOTAL OF EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL TOTAL OF EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL TOTAL OF EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL OF EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL OF EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL EIGHT (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL (8) POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL POSTS SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL SHALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL BE 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL 4" O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL O.D. AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL AND 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL 24' LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL LONG, SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL SEE DRAWING E7005 FOR EXACT LOCATION. INSTALL DRAWING E7005 FOR EXACT LOCATION. INSTALL DRAWING E7005 FOR EXACT LOCATION. INSTALL E7005 FOR EXACT LOCATION. INSTALL E7005 FOR EXACT LOCATION. INSTALL FOR EXACT LOCATION. INSTALL FOR EXACT LOCATION. INSTALL EXACT LOCATION. INSTALL EXACT LOCATION. INSTALL LOCATION. INSTALL LOCATION. INSTALL INSTALL INSTALL THE POSTS 5' BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED POSTS 5' BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED POSTS 5' BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED 5' BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED 5' BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED BELOW CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED CRUSHED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED STONE SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED SURFACE. FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED FOOTING DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED DIAMETER SHALL BE 2'. THESE POSTS SHALL BE FILLED SHALL BE 2'. THESE POSTS SHALL BE FILLED SHALL BE 2'. THESE POSTS SHALL BE FILLED BE 2'. THESE POSTS SHALL BE FILLED BE 2'. THESE POSTS SHALL BE FILLED 2'. THESE POSTS SHALL BE FILLED 2'. THESE POSTS SHALL BE FILLED THESE POSTS SHALL BE FILLED THESE POSTS SHALL BE FILLED POSTS SHALL BE FILLED POSTS SHALL BE FILLED SHALL BE FILLED SHALL BE FILLED BE FILLED BE FILLED FILLED FILLED WITH CONCRETE, BUT ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD CONCRETE, BUT ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD CONCRETE, BUT ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD BUT ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD BUT ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD ONLY TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD TO 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD 7 FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD FEET ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD ABOVE GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD GROUND SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD SURFACE. PLACE CAP ON THE TOP OF THE POSTS. DISREGARD PLACE CAP ON THE TOP OF THE POSTS. DISREGARD PLACE CAP ON THE TOP OF THE POSTS. DISREGARD CAP ON THE TOP OF THE POSTS. DISREGARD CAP ON THE TOP OF THE POSTS. DISREGARD ON THE TOP OF THE POSTS. DISREGARD ON THE TOP OF THE POSTS. DISREGARD THE TOP OF THE POSTS. DISREGARD THE TOP OF THE POSTS. DISREGARD TOP OF THE POSTS. DISREGARD TOP OF THE POSTS. DISREGARD OF THE POSTS. DISREGARD OF THE POSTS. DISREGARD THE POSTS. DISREGARD THE POSTS. DISREGARD POSTS. DISREGARD POSTS. DISREGARD DISREGARD DISREGARD NOTES OR DETAILS IN THIS DRAWING THAT SPECIFY DIFFERENTLY TO THE REQUIREMENTS IN THIS SPECIFIC ITEM.

AutoCAD SHX Text

POST CAP

File details come from the government source that posted it. Updated .