8628194-REV- (FERRITE BAR).PDF

SOURCE CONTROL DRAWING

REVISION HISTORY

REV SHEET DESCRIPTION BY DATE APPROVED

APPROVED SOURCE(S) OF SUPPLY

CONTROL

NUMBER PART NUMBER CAGE

CODE

NOMENCLATURE OR

DESCRIPTION NAME AND ADDRESS NOTES

8628194-1 012821-MN60 33062 FERRITE BAR, MN60

NATIONAL MAGNETICS GROUP, INC.

1210 WIN DRIVE

BETHLEHEM, PA 18017-7061

610-867-7600

ALTERNATE MATERIAL MAY BE

USED WITH WRITTEN

GOVERNMENT APPROVAL

HULLNO.

215-897-8735

REFERENCES

TITLE

SUPERSEDING OR MODIFICATION

IDENT

INFORMATION:

PHONE:

CODE:

REVWT GRP

SCALE: 1:2

D

SIZE

53711

CAGE CODE

SHEET 1 OF 2

8628194

NAVSEA DRAWING NO.

DEPARTMENT OF THE NAVY

NAVAL SEA SYSTEMS COMMAND

WASHINGTON NAVY YARD, DC 20376-0001

DIMENSIONAL TOLERANCES AND SURFACE FINISHES - UNLESS OTHERWISE SPECIFIED

.1

± TOL

.005

.02

DECIMALS ( )

WHOLE NUMBERS ARE ± 0.1 TOLERANCE

.XX

.X

.XXX

PLACES

1/326" TO 24"

>OR= TO 24" 1/16

DIMENSION

FRACTIONS ( )

< 6" 1/64

± TOL

5" TO 8"

DIMENSION

2" TO 5"

>OR= TO 15"

12" TO 15"

8" TO 12"

.126>OR= TO 24"

ALL PLASTICS

MACHINED

MOLDED

CONDITION ± TOL

.035

.010

WELDMENTS

DIMENSION

< 24"

± TOL

.062

+3/32 -1/16

+1/8 -3/32

+3/16 -1/8

+1/4 -1/4

+1/4 -3/16

TOLERANCE

+1/16 -1/16

CASTINGS

< 2"

WEIGHT CONTROL DATA

F=FWD A=AFT P=PORT S=STBD 0=CENTERLINE

I=INSTALL R=REMOVE XI=LOAD ITEM INSTALLED XR=LOAD ITEM REMOVED

USE SEPARATE LINES FOR EACH WT GRP, S/A, REV, WT INSTL, OR WT RMV

VERTICAL LEVERS IN FEET TO THE NEAREST HUNDREDTH OF A FOOT

LONGITUDINAL AND TRANSVERSE LEVERS IN FEET TO THE NEAREST TENTH OF A FOOT

WT

GRPREV NUMBER

SHIPALT LCG

REF

I, R

NOT APPLICABLE

XR

XI

WT

(LBS)

VCG

REF BL

F

A

OR

TCG

REF CL

P VAL

BY

S

SHIP APPLICABILITY

SHIP/CLASS REV

PREPARED BY

REVIEWED BY

LEAD ENGINEER

LOGISTICS

SUBSAFE PGRM DIR.

ACCEPTED FOR NAVSEA

APPROVED BY NAVSEA

DATE

DATE

DATE

DATE

DATE

APPLICATION

NEXT ASSY USED ON

MATERIAL:

OR RECONSTRUCTION OF DOCUMENT.

DESTRUCTION NOTICE

DISTRIBUTION STATEMENT D:

DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND U.S.

SHALL BE REFERRED TO THE UNDERSEA INTEGRATION PROGRAM OFFICE

DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS

(PMW 770) OF THE PROGRAM EXECUTIVE OFFICER, COMMAND, CONTROL,

DoD CONTRACTORS ONLY; (CRITICAL TECHNOLOGY OR ADMINISTRATIVE/

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DoD DIRECTIVE 5230.25.

(TITLE 50, U.S.C., APP. 2401 ET SEQ.), AS AMENDED. VIOLATIONS OF

SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATIVE ACT OF 1979

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

COMMUNICATIONS, COMPUTERS AND INTELLIGENCE; 4301 PACIFIC HIGHWAY,

SAN DIEGO, CA 92110-3127.

OPERATIONAL USE) (7/18/2019). OTHER U.S. REQUESTS

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.,

B B

A

7 5 4 2 1

A

C

D

8 7 5 4

C

D

2 1

( )MACHINED SURFACE FINISHES = 125MUIN (AA). BREAK ALL SHARP EDGES .01 TO .02.

ALL ANGLES ± 0 DEGREES 30 MINUTES. MATERIAL SPECIFICATIONS TOLERANCES APPLY TO

STOCK SIZES. THREAD DIMENSIONS AND DESIGNATIONS TO BE IN ACCORDANCE WITH NATIONAL

BUREAU OF STANDARDS HANDBOOK H-28. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS

ARE IN INCHES AND FEATURES ARE SYMMETRICAL ABOUT CENTERLINE. AMERICAN SOCIETY OF

MECHANICAL ENGINEERS ASME Y14.5 AND ASME Y14.100 ARE INVOKED WHERE APPLICABLE.

NAVAL SURFACE WARFARE CENTER

PHILADELPHIA DIVISION

PHILADELPHIA, PA 19112-1403

CAGE CODE 25685

A. CRIMMINS

B. HANNIGAN

L. FOSTER

D. PORTOFEE

2019-07-18

2019-07-18

2019-07-18

2019-07-18

MN60, SOLID

FERRITE BAR,

SEE

NOTE 3

BAR, FERRITE

C. SMITH

NOTES:

CHANGES SHALL ONLY BE INCORPORATED AS DIRECTED BY THE DESIGN ACTIVITY.1.

APPLICABLE STANDARDS AND SPECIFICATIONS:2.

ASME Y14.5-2009 DIMENSIONING AND TOLERANCING

MIL-DTL-31000A TECHNICAL DATA PACKAGES

IN ORDER TO MAINTAIN MAGNETIC PROPERTIES, THE FERRITE BAR SHALL NOT BE HEATED ABOVE THE CURIE 3.

TEMPERATURE OF 170 C.

ELECTRICAL MATERIAL REQUIREMENTS: 4.

RELATIVE MAGNETIC PERMEABILTY AT 10kHz SHALL BE GREATER THAN 5000 FOR TEMPERATURE IN THE RANGE OF 0 C TO 30 C AND FOR MAGNETIC FIELD STRENGTH LESS THAN 45 A/m RMS MAGNETIC LOSS TANGENT AT 20kHz SHALL BE LESS THAN 0.010

MECHANICAL PROPERTIES:5.

COMPRESSIVE STRENGTH: 200 - 600 N/mm^2 TENSILE STRENGTH: 20 - 65 N/mm^2 YOUNG'S MODULUS: 90 X 10^3 - 150 X 10^3 N/mm^2

THERMAL EXPANSION COEFFICIENT: [(10.5 - 12.5)E(-6)]/K

CERTIFICATE OF CONFORMANCE SHALL BE PROVIDED BY MANUFACTURER TO MEET OR EXCEED ALL DESIGN 6.

SPECIFICATIONS DETAILED ABOVE.

IDENTIFICATION MARKING: MANUFACTURER SHALL MARK EACH BAR WITH UNIQUE 3 DIGIT CONSECUTIVE SERIAL 7.

NUMBER USING PERMENANT INK. LOCATE APPROXIMATELY WHERE SHOWN ON SHEET 2.

IDENTIFICATION MARKING: BAG AND TAG WITH CAGE CODE PART NUMBER AND REVISION IAW MIL-STD-130N.8.

APPROVED SOURCE: ONLY THE ITEM DESCRIBED ON THIS DRAWING WHEN PROCURED FROM THE VENDOR LIST 9.

HEREON IS APPROVED BY THE GOVERNMENT FOR USE IN THE APPLICATION SPECIFIED HEREON. A SUBSTITUTE

ITEM SHALL NOT BE USED WITHOUT PRIOR APPROVAL BY THE GOVERNMENT.

IDENTIFICATION OF THE APPROVED SOURCE(S) OF SUPPLY HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE 10.

OF PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY FOR THE ITEM(S) DESCRIBED ON THE

DRAWING.

QUALITY ASSURANCE PROVISIONS: 11.

ALL CHARACTERISTICS ARE SUBJECT TO INSPECTION UNDER THE CONTRACTOR'S INSPECTION OR QUALITY SYSTEM.

D. GLINKA

UNCLASSIFIED//FOR OFFICIAL USE ONLY

UNCLASSIFIED//FOR OFFICIAL USE ONLY

2019-10-22

2019-10-22

29.000±.020

.005 A2X

.005 .005

A 2.000±.010

1.000±.005

X X X

REVWT GRP

SCALE: 2:3

D

SIZE

53711

CAGE CODE

SHEET 2

NAVSEA DRAWING NO.

B B

111416

A

15 13 12 9

A

C

D

16 15 13 12

C

D

10 9

8628194

UNCLASSIFIED//FOR OFFICIAL USE ONLY

UNCLASSIFIED//FOR OFFICIAL USE ONLY