Amendment_03-MALLET-QA_Final.pdf
PDF 399 KB Posted
- Attached to
- USCG MALLET DOCKSIDE REPAIRS FY19
- Solicitation number
- 70Z085-19-Q-P4503500
About this file
Amendment No. 3 - Question and Answer.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ No. 70Z085-19-Q-P4503500
USCG MALLET DS FY19
AMENDMENT NO: 03
The following answers are provided for RFQ question:
1) Question:
1.1 Work Item 13 :Crossdeck winches, renew- barge
Intent. This work item describes the requirements for the contractor to renew the port and starboard crossdeck winches.
1.2 Government - furnished property.
list for 1 Air Winch and 1 wire rope assembly.
Are you supplying both winched and wire ropes ? Are does contractor supply one of each also?
Answer:
Work Item 13 (Crossdeck Winches, Renew – Barge) is a definite work item describing the requirement for Contractor to renew one (01) crossdeck winch. The cutter is equipped with two (02) crossdeck winches and paragraph 1.1 incorrectly referenced ‘port and starboard’ winches. The correct locations are centerline-forward and aft-starboard, and this work item addresses the requirement to renew the crossdeck winch located on the centerline-forward side. Thus, the government is supplying both one (01) winch and one (01) wire rope assembly to complete work scope. The contractor is not directed to supply a secondary winch or wire rope.
For additional clarification, Work Item 14 (Crossdeck Winch, Inspect & Service- Barge) is a definite work item describing the requirement for Contractor to inspect and service one (01) crossdeck winch located on the aft-starboard side.
File details come from the government source that posted it.