AP4047_Attachment_A_Specifications_final.xlsb
XLSB spreadsheet 13 KB Posted
- Attached to
- Portable Lift Tables
- Solicitation number
- 70T05019Q9NAP4047
About this file
Specifications.
Text of this file
Specifications
| The contractor may use this sheet to demonstrate compliance with the specification as outlined in the combined synopsis/solicitation. The "Government Specification" column lists the general, high-level, area of the specification; however, the contractor will need to the RFQ to obtain the full requirement. | |
| Salient Requirements | Contractor's Specification |
| Structure-shall be fabricated from steel shapes, plates, and steel tubing. | |
| Platform-shall be approximately 29 inches by 48 inches. Shall be constructed of uncoated type 304 brushed or polished stainless steel | |
| Platform Backstop-12-18 inch high type 304 stainless back stop panel. | |
| Portability-by means of four 5" diameter casters; two swivel with wheel brakes at the push bar end and two rigid at the opposite end. | |
| Floor Lock-a brake mechanism which automatically engages when push bar assembly releases. | |
| Machine Weight-250-300 lbs. | |
| Skirting-shall enclose the scissors lifting mechanism, battery, charger, and hydraulic power unit. | |
| Power Unit-12-24 VDC battery(s) included with on-board 120 volt input battery charger. | |
| Battery-shall be spill proof, sealed "AGM" type, deep discharge recovery. | |
| Battery Charger-shall be of minimum length, plug mounted to the machine frame. | |
| Battery Charge Indicator-a battery "state of charge" meter or other suitable indicator | |
| Drip Pan-shall be built into the lift framework to containe possible oil seepage | |
| Performance Capacity- capable of raising and lowereing 300 lb load from maximum lowered height of 12" to a minimum raised height of 38". | |
| Speed/Time-with a fully charged battery, the lift shall raise the rated load in 7 seconds maximum | |
| Load Holding-shall be capable of holding load at any height throughout its travel, per the requirements of ANSI MH 29.1. | |
| Cycles-shall provide a minimum of 150 up and down cycles of the lift | |
| Marking-shall be marked with ratings per ANSI MH 29.1 | |
| Post consumer content-16% | |
| Total recovered materials 25% |
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it.