6973GH-26-R-00074.pdf

SEE ADDENDUMIS CHECKED.

CODE 17a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE 16a. CONTRACTOR/

TELEPHONE NO.

16b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

AAQ710-AFN

BLDG 014-AHQ, ROOM 233A

PO BOX 25082

FAA AERONAUTICAL CENTER

AAQ-710 LOGISTICS CENTER ACQ

A6976C5F

OKLAHOMA CITY OK 731696901

6500 S. MACARTHUR LSF AREA A

PRODUCT SVCS GRP

6976C5 DOT FAA AJW-L511 WC 311

A6976C5F

CODE 15. ADMINISTERED BYCODE 14. DELIVER TO

X

X X

SEE SCHEDULE

BLOCK IS MARKED

237130

SIZE STANDARD:

100.00% FORSET ASIDE

UNRESTRICTED

AAQ710-AFN

OKLAHOMA CITY OK 73125

BLDG 014-AHQ, ROOM 233A

PO BOX 25082

FAA AERONAUTICAL CENTER

AAQ-710 LOGISTICS CENTER ACQ

RFPIFB

11. DELIVERY FOR FOB10. THIS ACQUISITION ISCODE 9. ISSUED BY

RFQ

13. METHOD OF SOLICITATION

DESTINATION UNLESS

SIC:

SMALL BUSINESS

12. DISCOUNT TERMS

02/18/2026 1700 CS

02/10/2026

405-954-7861Edward Wright (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 2. CONTRACT NO.

7.

6. SOLICITATION

6973GH-26-R-00074

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 2AC-26-01193

OFFEROR TO COMPLETE BLOCKS 12, 16, 22, 23, & 28

OKLAHOMA CITY OK 73125

EFFECTIVE DATE

$45

17b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 17a. UNLESS BLOCK BELOW

ISSUE DATE

23.

AMOUNT

22.

UNIT PRICE

21.

UNIT

20.

QUANTITY

19.

SCHEDULE OF SUPPLIES/SERVICES

18.

ITEM NO.

Attachments

* SOW - Bean Ridge Tower Remediation - USFS R1

* Bean Ridge Photo Dec

Continued ...

27. AWARD OF CONTRACT: REFERENCE

HEREIN, IS ACCEPTED AS TO ITEMS:

X

DATED

Raymond A. Lena

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

40d. TOTAL CONTAINERS40c. DATE REC'D (YY/MM/DD)

40b. RECEIVED AT (Location)

40a. RECEIVED BY (Print)

26. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

38. PAID BY37. S/R VOUCHER NUMBER36. S/R ACCOUNT NUMBER

35. CHECK NUMBER

FINALCOMPLETE PARTIAL

34. PAYMENT

39c. DATE39b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

39a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32c. DATE32b. SIGNATURE OF AUTHORIZED CONTRACT AUTHORITY

REPRESENTATIVE

FINALPARTIAL

CORRECT FOR

33. AMOUNT VERIFIED 32. VOUCHER NUMBER

CONTRACT, EXCEPT AS NOTED

ACCEPTED, AND CONFORMS TO THEINSPECTEDRECEIVED

30a. QUANTITY IN COLUMN 20 HAS BEEN

29c. DATE SIGNED

28a. SIGNATURE OF OFFEROR/CONTRACTOR 29a. CONTRACT AUTHORITY (SIGNATURE OF CONTRACTING OFFICER)

28c. DATE SIGNED28b. NAME AND TITLE OF SIGNER (Type or Print) 29b. NAME OF CONTRACTING OFFICER (Type or Print)

31. SHIP NUMBER

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND

CONDITIONS SPECIFIED HEREIN.

25. TOTAL AWARD AMOUNT (For Contract Authority Use Only)24. ACCOUNTING AND APPROPRIATION DATA

OFFER

ITEM NO.

SUPPLIES/SERVICES

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

6973GH-26-R-00074

(A) (B) (C) (D) (E) (F)

Delivery: 30 Days After Award

00001 USFS Bean Ridge: Material, Labor, Equiptment and

Lodging, Misc. Expenses

Section B - Supplies or Services/Prices Section B - Schedule

Clause List

0.0 FAA AMS CLAUSES UPDATE 122 APRIL 1, 2025

PART 3.3.1 CONTRACT FUNDING, FINANCING AND PAYMENT

PART 3.3.2 CONTRACT COST PRINCIPLES

PART 3.6.2 LABOR LAWS

PART 3.6.3 ENVIRONMENTAL LAWS

PART 3.6.4 FOREIGN ACQUISITION

PART 3.9.1 RESOLUTION OF PROTESTS AND DISPUTES

PART 3.10.1 CONTRACT ADMINISTRATION

PART 3.10.6 TERMINATION OF CONTRACTS

The remainder of this page has been intentionally left blank.

Section C - Description/Specifications Scope of Work

Clause List

Section D - Packaging and Marking

Section E - Inspection and Acceptance Clause List

3.10.4-4 INSPECTION OF SERVICES - BOTH FIXED-PRICE & COST REIMBURSEMENT (APR

1996)

3.10.4-16 RESPONSIBILITY FOR SUPPLIES (APR 1996)

Section F - Deliveries or Performance Clause List

3.10.1-9 STOP-WORK ORDER (APR 2025)

Section G - Contract Administration Data Clause List

3.10.1-22 CONTRACTING OFFICER'S REPRESENTATIVE (APR 2012)

Section H - Special Contract Requirements Clause List

3.1.9-1 ELECTRONIC COMMERCE AND SIGNATURE (JUL 2020)

(a) The Electronic Signatures in Global and National Commerce Act (E-SIGN) establishes a legal equivalence between:

(1) Contracts written on paper and contracts in electronic form;

(2) Pen-and-ink signatures and electronic signatures; and

(3) Other legally-required written records and the same information in electronic form.

(b) With the submission of an offer, the offeror acknowledges and accepts the utilization of electronic commerce as part of the requirements of this solicitation and the resultant contract.

(c) Certain documents may need to be provided or maintained in original form, such as large-scale drawings impractical to convert to electronic format or a document with a raised seal signifying authenticity. This clause does not change or affect any other requirements that a document must be in paper format to satisfy legal requirements such as for certain real estate transactions.

(d) The use of electronic signature technology is authorized under this solicitation and the resulting contract.

(e) Contractors must not digitally sign any documents with software that uses the Secure Hash Algorithm 1 (SHA- 1). All digitally signed documents and contracts sent to the FAA must use a SHA-256 or higher hash algorithm. This is based on the National Institute of Standards and Technology (NIST) Policy Statement on Hash Functions dated August 5, 2015. Further guidance on the use of SHA-256 is in NIST Special Publication (SP) 800-57 Part 1, section

5.6.2 as amended and SP 800-131A, Revision 1 dated November 6, 2015. Additional guidance on the use of SHA-3 is in NIST SP 800-185 as amended.

(f) Contractors do not have to update documents previously digitally signed using SHA-1 hash algorithms unless the document requires updating. The FAA and contractors may continue to use SHA-1 for the following applications:

Verifying old digital signatures and time stamps, generating and verifying hash-based message authentication codes (HMACs), key derivation functions (KDFs), and random bit/number generation.

(End of Clause)

Section I - Contract Clauses Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

https://fast.faa.gov/contractclauses.cfm.

(End of clause)

3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (JAN 2023)

3.2.2.3-29 INTEGRITY OF UNIT PRICES (JUL 2004)

3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS (OCT 2015)

3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2023)

3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)

3.2.4-34 OPTION TO EXTEND SERVICES (OCT 2019)

3.2.5-1 OFFICIALS NOT TO BENEFIT (OCT 2024)

3.2.5-3 GRATUITIES OR GIFTS (OCT 2024)

3.2.5-4 CONTINGENT FEES (OCT 2024)

3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 2024)

3.3.1-1 PAYMENTS (JUL 2018)

3.3.1-8 EXTRAS (OCT 2024)

3.3.1-20 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS

(OCT 2012)

3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD

MANAGEMENT (OCT 2024)

3.3.2-1 FAA COST PRINCIPLES (OCT 2019)

3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (APR 2025)

3.6.1-1 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2019)

3.6.2-16 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (APR 2025)

3.6.2-39 TRAFFICKING IN PERSONS (OCT 2024)

3.6.3-13 AFFIRMATIVE PROCUREMENT OF RECYCLED CONTENT AND PRODUCTS UNDER

SERVICE AND CONSTRUCTION CONTRACTS (OCT 2024)

3.6.4-5 FAA BUY AMERICAN PREFERENCE - STEEL AND MANUFACTURED GOODS (APR

2022)

3.6.4-8 BUY AMERICAN ACT AND FAA BUY AMERICAN PREFERENCE - USMCA

IMPLEMENTATION ACT - BALANCE OF PAYMENTS PROGRAM (JAN 2024)

3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)

3.6.6-1 DRUG FREE WORKPLACE (APR 2023)

3.6.6-2 SEAT BELT USE BY CONTRACTOR EMPLOYEES (APR 2023)

3.6.6-3 CONTRACTOR POLICY TO BAN TEXT MESSAGING WHILE DRIVING (JUL 2023)

3.8.9-2 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND

VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (JUL 2023)

3.9.1-1 CONTRACT DISPUTES (JAN 2020)

3.9.1-2 PROTEST AFTER AWARD (AUG 1997)

3.10.1-7 BANKRUPTCY (APR 1996)

3.10.1-12 CHANGES - FIXED-PRICE (APR 1996) - ALTERNATE II (APR 1996)

3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)

3.10.1-28 CHANGES REQUIRED BY AMS (JAN 2024)

3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT

1996)

3.10.6-4 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (JAN 2020)

3.11-62 PREFERENCE FOR PRIVATELY OWNED U.S. FLAG COMMERCIAL VESSELS (APR

2025)

3.3.1-33 SYSTEM FOR AWARD MANAGEMENT (JAN 2024)

(a) Definitions. As used in this clause

"Registered in the SAM database" means that the Contractor has entered all mandatory information, including the Unique Identity Identifier (UEI) or the Electronic Funds Transfer indicator, into the SAM database.

"System for Award Management (SAM) database" means the primary Government repository for Contractor information required for the conduct of business with the Government.

"Unique Entity Identifier (UEI)" (also known as the Unique Entity ID) means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

"Electronic Funds Transfer indicator" means a 4-character suffix to the Unique Entity Identifier. This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror must enter, in Representations, Certifications and Other Statements of Offerors Section of the solicitation, the UEI or EFT indicator that identifies the offeror's name and address exactly as stated in the offer. The UEI will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a UEI, it should contact www.sam.gov directly to obtain one.

The offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company Physical Street Address, City, State, and ZIP Code.

(4) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(5) Company Telephone Number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company Headquarters name and address (reporting relationship within your entity).

(d) If the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror.

(e) Processing time should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. If registered in SAM as a Service-Disabled Veteran- Owned Small Business (SDVOSB), by submission of an offer, the offeror acknowledges that they are certified as an SDVOSB under the Small Business Administration's Veteran Small Business Certification Program (VetCert).

(g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in AMS Procurement Guidance, the Contractor must provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to:

(A) Change the name in the SAM database;

(B) Comply with the requirements of AMS regarding novation and change-of-name agreements; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide the Contracting Officer with the notification, sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor must not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims. Assignees must be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract.

(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.sam.gov.

(End of Clause)

3.6.4-2 BUY AMERICAN ACT - SUPPLIES (JAN 2024)

(a) The Buy American Act (41 U.S.C. §§ 8301-8305) and Executive Order No. 10582, dated December 17, 1954, as amended, provide that the Government gives preference to domestic end products.

(b) Definitions:

(1) "Components," as used in this clause, means those articles, materials, and supplies incorporated directly into the end products.

(2) "Cost of components" means-

(A) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(B) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (A) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

(3) "Domestic end product," as used in this clause for an end product that does not consist wholly or predominantly of iron or steel or a combination of both, means

(A) an unmanufactured end product mined or produced in the United States, or

(B) an end product manufactured in the United States, if

(i) the cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic, or

(ii) the end product is a COTS item, or

For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components".

(4) "End products," as used in this clause, means those articles, materials, and supplies to be acquired for public use under this contract.

(5) "Fastener" means a hardware device that mechanically joins or affixes two or more objects together.

Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

(6) "Foreign End Product" means an end product other than a domestic end product.

(7) "Foreign offer," as used in this clause, means an offered price for a foreign end product, including transportation to destination and duty (whether or not a duty free entry certificate is issued).

(8) "Predominantly of iron or steel or a combination of both" means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

(9) "Steel" means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

(c) The Contractor must deliver only domestic end products, except those--

(1) For use outside the United States;

(2) That the FAA determines are not mined, produced, or manufactured in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality. In accordance with AMS Guidance T3.6.4A.3.c (3) (c), such determinations of non-availability must also be approved by the FAA Acquisition Executive (FAE) and reviewed by the Office of Management and Budget (OMB) Made in America Office (MIAO);

(3) For which the FAA determines that domestic preference would be inconsistent with the public interest;

or

(4) For which the FAA determines the cost to be unreasonable.

(A) Unless the FAA determines otherwise, the offered price of a domestic end product is unreasonable when the lowest acceptable domestic offer exceeds the lowest acceptable foreign offer, inclusive of duty, by:

(i) More than 20 percent, if a domestic offer is from a large business that is not a labor surplus area concern; or

(ii) More than 30 percent, if a domestic offer is from a small business concern or any labor surplus area concern.

(B) The evaluation in subparagraph (A) above will be applied on an item by item basis or to any group of items on which award may be made, as specifically provided by the screening information request.

(C) If an award of more than $250,000 would be made to a domestic concern if the 30 percent factor were applied, but not if the 20 percent factor were applied, the FAA will decide whether award to the domestic concern would involve unreasonable cost.

(End of clause)

3.8.9-4 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB ENTITIES (JAN 2024)

(a) Definitions. As used in this clause-

Kaspersky Lab covered article means any hardware, software, or service that-

(1) Is developed or provided by a Kaspersky Lab covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab covered entity.

Kaspersky Lab covered entity means-

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab, including any change in name, e.g. "Kaspersky";

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any Kaspersky Lab covered article. The Contractor is prohibited from-

(1) Providing any Kaspersky Lab covered article that the Government will use; and

(2) Using any Kaspersky Lab covered article in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement.

(1) In the event the Contractor identifies a Kaspersky Lab covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor must report this in writing to the Contracting Officer. For indefinite delivery contracts, the Contractor must report this in writing to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order.

(2) The Contractor must report the following information pursuant to paragraph (c) (1) of this clause:

(i) Within 3 business days from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor must describe the efforts it undertook to prevent use or submission of a Kaspersky Lab covered article, any reasons that led to the use or submission of the Kaspersky Lab covered article, and any additional efforts that will be incorporated to prevent future use or submission of Kaspersky Lab covered articles.

(d) Subcontracts. The Contractor must insert the substance of this clause, including this paragraph (d), in all subcontracts including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

3.8.9-5 PROHIBITION ON USING BYTEDANCE COVERED APPLICATIONS INCLUDING

TIKTOK (JUL 2023)

(a) Definitions. As used in this clause-

"Covered Application" means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

"Information technology," as defined in 40 U.S.C. 11101(6)-

(1) Means any equipment, or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a Contractor under a contract with the executive agency that requires the use-

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal Contractor incidental to a Federal contract.

(b) Prohibition. Section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117- 328), the No TikTok on Government Devices Act, and its implementing guidance under Office of Management and Budget (OMB) Memorandum M-23-13, dated February 27, 2023, "No TikTok on Government Devices" Implementation Guidance, collectively prohibit the presence or use of a covered application on executive agency information technology, including certain equipment used by Federal contractors. The Contractor is prohibited from having or using a covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor's employees; however, this prohibition does not apply if the Contracting Officer provides written notification to the Contractor that a waiver has been granted in accordance with AMS Guidance T3.8.9C.3.c.(2).

(c) Subcontracts. The Contractor must insert the substance of this clause, including this paragraph (c), in all subcontracts including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

3.8.9-7 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS—PROHIBITION

(JAN 2024)

(a) Definitions. As used in this clause-

Covered article, as defined in 41 U.S.C. 4713(k), means-

(1) "Information technology," as defined in 40 U.S.C. 11101, including cloud computing services of all types;

(2) "Telecommunications equipment" or "telecommunications service," as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153);

(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002); or

(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.

FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring the removal of covered articles from executive agency information systems or the exclusion of one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e):

(1) The Secretary of Homeland Security may issue FASCSA orders applicable to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order.

(2) The Secretary of Defense may issue FASCSA orders applicable to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems.

This type of FASCSA order may be referred to as a DoD FASCSA order.

(3) The Director of National Intelligence (DNI) may issue FASCSA orders applicable to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.

Intelligence community, as defined by 50 U.S.C. 3003(4), means the following-

(1) The Office of the Director of National Intelligence;

(2) The Central Intelligence Agency;

(3) The National Security Agency;

(4) The Defense Intelligence Agency;

(5) The National Geospatial-Intelligence Agency;

(6) The National Reconnaissance Office;

(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;

(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;

(9) The Bureau of Intelligence and Research of the Department of State;

(10) The Office of Intelligence and Analysis of the Department of the Treasury;

(11) The Office of Intelligence and Analysis of the Department of Homeland Security; or

(12) Such other elements of any department or agency as may be designated by the President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.

National security system, as defined in 44 U.S.C. 3552, means any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency-

(1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral part of a weapon or weapons system; or is critical to the direct fulfillment of military or intelligence missions, but does not include a system that is to be used for routine administrative and business applications (including payroll, finance, logistics, and personnel management applications); or

(2) Is protected at all times by procedures established for information that have been specifically authorized under criteria established by an Executive order or an Act of Congress to be kept classified in the interest of national defense or foreign policy.

Reasonable Inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of any covered articles, or any products or services produced or provided by a source. This applies when the covered article or the source is subject to an applicable FASCSA order. A reasonable inquiry excludes the need to include an internal or third-party audit.

Sensitive compartmented information means classified information concerning or derived from intelligence sources, methods, or analytical processes, which is required to be handled within formal access control systems established by the Director of National Intelligence.

Sensitive compartmented information system means a national security system authorized to process or store sensitive compartmented information.

Source means a non-Federal supplier, or potential supplier, of products or services, at any tier.

(b) Prohibition.

(1) Unless an applicable waiver has been issued by the issuing official, Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (b)(1).

[The Contracting Officer must select either "yes" or "no" for each of the following types of FASCSA orders:]

Yes [X] No [ ] DHS FASCSA orders

Yes [ ] No [X] DoD FASCSA orders

Yes [ ] No [X] DNI FASCSA orders

(2) The Contractor must search for applicable FASCSA orders of the type identified in paragraph (b)(1) of this clause in the System for Award Management (SAM). Issued FASCSA Orders may be identified by selecting the "View FASCSA Orders" button from the SAM homepage (https://www.sam.gov) and viewing or downloading FASCSA orders from the Supply Chain Security Orders webpage.

(3) The FAA may identify in the SIR additional FASCSA orders that are not in SAM, which are effective and apply to the SIR and resultant contract.

(4) A FASCSA order issued after the publication date of the SIR applies to this contract only if added by an amendment to the SIR or by modification to the contract. However, see paragraph (c) of this clause.

(5) Contractor request for waivers.

(i) Required disclosures. If the contractor wishes to ask for a waiver of the requirements of an existing order identified in a SIR or contract or for a waiver of the requirements of a new FASCSA order being applied through modification, then the Contractor must disclose the following:

(A) Name of the product or service provided to the Government;

(B) Name of the covered article or source subject to a FASCSA order;

(C) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied or supplies the covered article or the product or service to the Offeror;

(D) Brand;

(E) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(F) Item Description;

(G) Reason why the applicable covered article or the product or service is being provided or used;

(ii) FAA review of disclosures. The Contracting Officer will review disclosures provided in paragraph (b)(5)(i) to determine if any waiver is warranted. A Contracting Officer may choose not to pursue a waiver for covered articles or sources otherwise covered by a FASCSA order and to instead pursue other appropriate action.

(c) Notice and reporting requirement.

(1) During contract performance, the Contractor is required to:

(i) Comply with all FASCSA orders identified under paragraph (b) of this clause; and

(ii) Review SAM.gov at least once every three months, or as advised by the Contracting Officer, to check for covered articles subject to FASCSA order(s), or for products or services produced by a source subject to FASCSA order(s) not currently identified under paragraph (b) of this clause.

(2) If the Contractor identifies a new FASCSA order(s) that could impact their supply chain, then the Contractor must conduct a reasonable inquiry to identify whether a covered article or product or service produced or provided by a source subject to the FASCSA order(s) was provided to the Government or used during contract performance.

(3) If the Contractor identifies, including through any notification by a subcontractor at any tier, that a covered article or product or service produced or provided by a covered source was provided to the Government or used during contract performance and is subject to a FASCSA order(s) identified in paragraph (b) of this clause, or a new FASCSA order identified in paragraph (c)(2) of this clause, the Contractor must submit a report to the Contracting Officer. For indefinite delivery contracts, the Contractor must report to both the Contracting Officer for the indefinite delivery contract and all the respective Contracting Officer(s) of any other affected orders.

(4) The Contractor must report the following information for each covered article or each product or service produced or provided by a source, where the covered article or source is subject to a FASCSA order, pursuant to paragraph (c) of this clause:

(i) Within 3 business days from the date of such identification or notification:

(A) Contract number;

(B) Order number(s), if applicable;

(C) Name of the product or service provided to the Government or used during performance of the contract;

(D) Name of the covered article or source subject to a FASCSA order;

(E) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Contractor;

(F) Brand;

(G) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(H) Item description; and

(I) Any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the information in paragraph (c)(4)(i) of this clause:

(A) Any further available information about mitigation actions undertaken or recommended.

(B) In addition, the Contractor must describe the efforts it undertook to prevent submission or use of the covered article or the product or service produced or provided by a source subject to an applicable FASCSA order, and any additional efforts that will be incorporated to prevent future submission or use of the covered article or the product or service produced or provided by a source that is subject to an applicable FASCSA order.

(d) Removal. Upon notification from the contracting officer, during the performance of the contract, the Contractor must promptly make any necessary changes or modifications to remove any covered article or any product or service produced or provided by a source that is subject to an applicable Governmentwide FASCSA order.

(e) Subcontracts.

(1) The Contractor must insert the substance of this clause, including this paragraph (e) and excluding paragraph (c)(1) of this clause, in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial products and commercial services.

(2) The Government may identify in the SIR additional FASCSA orders that are not in SAM, which are effective and apply to the contract and any subcontracts and other contractual instruments under the contract. The Contractor or higher-tier subcontractor must notify their subcontractors, and suppliers under other contractual instruments, that the FASCSA orders in the SIR that are not in SAM apply to the contract and all subcontracts.

(End of Clause)

3.13-16 RECORDS MANAGEMENT (OCT 2023)

(a) Definitions.

Federal record as defined in 44 U.S.C. § 3301, means all recorded information, regardless of form or characteristics, made or received by a Federal agency under Federal law or in connection with the transaction of public business and preserved or appropriate for preservation by that agency or its legitimate successor as evidence of the organization, functions, policies, decisions, procedures, operations, or other activities of the United States Government or because of the informational value of data in them. The term Federal record:

(1)Includes all FAA records.

(2)Does not include personal materials.

(3)Applies to records created, received, or maintained by Contractors pursuant to a FAA contract.

(4) May include deliverables and documentation associated with deliverables.

(b) Requirements.

(1) Compliance. The contractor must comply with all applicable records management laws and regulations, as well as National Archives and Records Administration (NARA) records policies, including but not limited to the Federal Records Act (44 U.S.C. chapters 21, 29, 31, 33), NARA regulations at 36 CFR Chapter XII Subchapter B, and those policies associated with the safeguarding of records covered by Privacy Act of 1974 (5 U.S.C. 552a), to the extent that the Privacy Act applies to any records maintained by the Contractor. These policies include the preservation of all Federal records, regardless of form or characteristics, mode of transmission, or state of completion.

(2) Applicability. All data created for Government use and delivered to, or falling under, the legal control of the Government, are Federal records subject to the provisions of 44 U.S.C. chapters 21, 29, 31, and 33. Such Federal records must be managed and scheduled for disposition only as permitted by the Federal Records Act, relevant statute or regulation, and FAA Order 1350.14 Records Management" at https://www.faa.gov/documentLibrary/media/Order/FAA_1350.14B.pdf.

(3) Records maintenance. While in Contractor's custody, the Contractor is responsible for preventing the alienation or unauthorized destruction of FAA records, including all forms of mutilation. Records may not be removed from the legal custody of FAA or destroyed except in accordance with the provisions of the agency records schedules and with the written concurrence of the FAA Agency Records Officer (ARO) (or the ARO's designate) and Contracting Officer, as appropriate. Willful and unlawful destruction, damage or alienation of Federal records is subject to the fines and penalties imposed by 18 U.S.C. 2701. In the event of any unlawful or accidental removal, defacing, alteration, or destruction of records, the Contractor must report the event to the Contracting Officer in accordance with 36 CFR 1230, Unlawful or Accidental Removal, Defacing, Alteration, or Destruction of Records, for reporting to NARA by FAA Records Management. Electronic records and associated metadata must be accompanied by sufficient technical documentation to permit understanding and use of the records and data.

(4) Unauthorized disclosure. The Contractor must notify the Contracting Officer within 2 (two) hours of discovery of any inadvertent or unauthorized disclosures of information, data, documentary materials, records or equipment.

Disclosure of non-public information is limited to authorized personnel with a need-to-know as described in the contract. The Contractor must ensure that the appropriate personnel, administrative, technical, and physical safeguards are established to ensure the security and confidentiality of this information, data, documentary material, records and/or equipment is properly protected. The Contractor must not remove material from Government facilities or systems, or facilities or systems operated or maintained on the Government's behalf, without the express written permission of the FAA ARO (or the ARO's designate) and the Contracting Officer. Destruction of records is expressly prohibited unless in accordance with the contract.

(c) Records management contracts - where the contractor is required to design, develop, and/or operate a system of records, the following additional requirements apply:

During the contract, the FAA ARO (or ARO's designate) has the right to inspect where the records are stored (digitally or paper records) in order to ensure they are properly protected from the elements and/or loss. This inspection must be coordinated through the Contracting Officer or the Contracting Officer's Representative. The contractor must be provided 30 calendar days' notice of such inspections. This clause may be tailored to provide for a different notice period. Additional details regarding such inspections consistent with this clause may be specified in the Statement of Work.

For contracts where the contractor is responsible for managing FAA records, when the records are no longer required or at the completion of the contract, the records must be returned to FAA control. Items returned to the FAA must be hand carried, mailed, or securely electronically transmitted to the Contracting Officer or address indicated in the contract.

(d) Non-public information. The Contractor must not create or maintain any records containing any non-public FAA information that are not specifically tied to or authorized by the contract.

(e) Ownership. Consistent with all applicable data rights clauses in this contract, the FAA is the sole owner of the rights to all data and records produced as part of this contract. All deliverables under the contract are the property of the U.S. Government for which FAA will have unlimited rights to use, dispose of, or disclose such data contained therein as it determines to be in the public interest. Any Contractor rights in the data or deliverables must be identified as required by applicable data rights clauses in this contract.

(f) Notification of third party access requests. The Contractor must notify the Contracting Officer promptly of any requests from a third party for access to Federal records, including any warrants, seizures, or subpoenas it receives, including those from another Federal, State, or local agency. The Contractor must cooperate with the Contracting Officer to take all measures to protect Federal records, from any unauthorized disclosure.

(g)Training. All Contractor employees assigned to this contract who create, work with, or otherwise handle records are required to take FAA-provided records management training upon starting under the contract and annually thereafter as per the FAA Electronic Learning Management System (eLMS). If the contractor does not have access to eLMS, the contractor is to contact the Contracting Officer or Contracting Officer's Representative (COR) who will advise the ARO who will in turn make arrangements to ensure the contractor has access. The Contractor is responsible for confirming to the Contracting Officer in an annual report due by September 30 of each year under the contract that training, including initial training and annual refresher training, has been completed in accordance with agency policies. This annual report must list the employee names and dates of initial or annual refresher training.

(h) Agency Records Officer (ARO) - regarding clause provisions above that cite the ARO or designate, information as to the name of the ARO or the ARO designate for particular locations outside FAA Headquarters may be obtained from the FAA Records and Information Management Team (RIM) at 9-faa-records-management-program@faa.gov.

(i) Subcontractor flowdown requirements. The Contractor must incorporate the substance of this clause, its terms and requirements including this paragraph (i), in all subcontracts under this contract.

(End of clause)

3.14-4 ACCESS TO FAA FACILITIES, SYSTEMS, GOVERNMENT PROPERTY, AND SENSITIVE

UNCLASSIFIED INFORMATION (APR 2024)

1. Terms defined in the AMS Clause 3.14-2 "Contractor Personnel Suitability Requirements" have the same meaning in this clause.

2. It may become necessary for the Government to grant access to FAA systems or issue Government property, to include FAA issued ID cards, or sensitive unclassified information (SUI), to contractor employees. The FAA shall have the authority to restrict or deny unescorted access into FAA facilities to anyone. The FAA shall also have the authority to determine the number of PIV cards to be issued to contractor employees, based on operational necessity.

Individuals requiring non-routine access for maintenance purposes shall be escorted by FAA personnel and be issued appropriate FAA visitor badges. Prior to or upon completion or termination of the work under the contract, the contractor must return all such Government property and SUI to the Contracting Officer's Representative (COR).

3. Improper use, possession or alteration of Government property is subject to penalties under Title 18, USC 499, 506, 701, and 1030.

4. In the event such Government property is lost, stolen, or not returned, the contractor understands and agrees that the Government may, in addition to any other withholding provision of the contract, withhold the value of the asset for each item of Government property not returned. If the Government property, to include FAA issued ID cards, or SUI is not returned within 30-calendar-days from the date the withholding action was initiated, any amount so withheld is forfeited by the contractor. Any portable devices that are lost, stolen, or not returned must be reported by the contractor within one (1) hour to the FAA Security Operations Center (phone 1(866)-580-1852(Option 1) or email 9-AWA-SOC@faa.gov).

5. Access to aircraft ramp/hangar areas is authorized only to those persons displaying a flight line identification card and for vehicles, with a current ramp permit issued pursuant to Title 49, Part 1542, Code of Federal Regulations.

6. The Government retains the right to inspect inventory, or audit Government property or sensitive information issued to the contractor in connection with the contract and do so at the convenience of the Government. Any items not accounted for, to the satisfaction of the Government, will be assumed to be lost and the provisions of section (3) of this clause apply.

7. The issuance of Government property to include SUI must be approved by the COR who will require the contractor employee to sign a receipt for each item. Lost or stolen Government property or SUI must immediately be reported concurrently to the Contracting Officer (CO), COR, and the FAA SOC at the telephone number and email address listed under section (3) above.

8. Each contractor employee, during all times of on-site performance at an FAA facility, must prominently display his/her current and valid FAA Personal Identity Verification (PIV) card, or other FAA issued ID card, on the front portion of his/her body between the neck and waist. Each FAA ID cardholder must not affix pins, stickers, or other item to the card.

9. Prior to any contractor employee obtaining a FAA ID Card or other government property, IAW FAA Order

1600.78 the contractor is required to enter data for each employee into the VAP (Vendor Applicant Portal) as described in AMS clause 3.14-2, Contractor Personnel Suitability Requirements.

10. The Office of Personnel Security (AXP) will determine whether a favorable interim and/or final suitability determination can be granted to:

a. Exercise reciprocity when applicable.

b. Initiate the contractor applicant into the National Background Investigation System (NBIS) electronic application (eAPP) or subsequent system, so that the applicant can complete the investigative forms.

Interim suitability determination (ISD) cannot be granted until all background investigation forms are completed and fingerprints and signature pages are submitted to AXP. Authorization for the contractor employee to begin work on the FAA contract will be an Interim or Final Suitability notification from AXP.

11. To apply for a FAA PIV card, IAW FAA Order 1600.78, the contractor employee must submit an identification card application (DOT 1681) using the automated system located at https://idms.faa.gov/1681. The application must be approved by the CO or COR.