Attachment 1 WJHTC Construction QVL SOW 1-9-2024.pdf

STATEMENT OF WORK – WJHTC CONSTRUCTION QVL

ATTACHMENT 1 1/9/2024

Category 1. General Construction: NAICS 236220

Vendor must have a New Jersey (NJ) General Contractor License.

Work under General Construction may include but may not be limited to the following:

1.1 Site-work – including site clearing, grubbing, demolition, environmental Abatement, earthwork for structures and pavements, excavation/trenching, backfilling and compacting, installation / repair of utility systems (gas, electric, water, communications, etc.) directional drilling, concrete, asphalt pavements;

fencing; and landscaping services.

1.1.1 Site Utilities - Service water supply systems, Domestic and Fire water mains and lateral installation and repair; Sanitary sewage systems, septic systems, and septic tanks, Force mains, Lift Stations; Stormwater systems including manholes, storm drains, catch basins, drop inlets, outfalls, ditches, discharge points, associated piping and similar structures; Chilled and heating water piping; Video piping inspection services.

1.1.2 Roads and Surfaces – Line painting, asphalt repair including pothole, crack repair, joint sealant, seal coating; asphalt paving including inspection, repairs, and alterations of concrete and bituminous roads, parking areas, walks, and curbs; and unpaved surface grading services

1.2 Concrete & Masonry - including general, structural, architectural concrete, concrete formwork and reinforcement, cast-in-place concrete, pre-cast/pre-stressed structural or architectural concrete, concrete repair and rehabilitation;

unit masonry and/or reinforced masonry, glass masonry units; masonry repair and/or restoration.

1.3 Metals – including metalwork fabrication; structural steel framing and/or decking; and cold-formed metal framing.

1.4 Woods and Plastics – including rough and finish carpentry work; solid polymer fabrications; and installations of furnishings i.e. window treatments and blinds, wardrobes/vanities, cabinets and countertops, and furniture systems.

1.5 Thermal and Moisture Protection (Roofing) – including different types of roofing systems; weatherproofing and waterproofing systems; external insulation and finish systems; fire stopping and joint sealing.

1.6 Doors and Windows – including wood and/or metal doors and frames;

overhead sectional or rolling doors; aluminum, steel, plastic or wood windows of various types and sizes; associated door and window, hardwares and glazing.

1.7 Finishes – installation and application of different floor, wall and ceiling finishes. Floor finishes may include carpets and carpet tiles, ceramic, quarry and paver tiles, and resilient flooring. Wall finishes may include gypsum wallboard, plaster veneer, stucco, paints and coatings, and wall coverings. Ceiling finishes may include painted gypsum wallboard, acoustical ceiling including metal support assemblies.

1.8 Specialties – including elevator and/or lift systems; audio/visual communications facilities; toilet and bath accessories and partitions; access flooring and/or raised floor systems; identification devices; interior/exterior signage; wall and door louvers; demountable; operable and/or folding partitions;

steel shelving and lockers.

1.9 Experimental Airport Paving, Construction and Demolition – Some construction projects may include scope for experimental airport paving, construction and demolition. This may include specialized earthwork for subgrade preparation, subbase and base layer preparation, precision grading, asphalt paving, and concrete paving. Demolition will entail selective removal of pavement layers, trenching and complete removal of pavements down to subgrade. Much of this work occurs inside buildings 296 and 298, therefore logistics of construction will differ from working outdoors. Orders that include work under this subsection will need to be accomplished through use of an approved paving subcontractor. Requirements of the subcontractor will be included at the Task Order, Request for Proposal (RFP) level SOW.

Category 2. Mechanical / HVAC-R : NAICS 238220

Vendor must have a NJ Master HVACR license.

Work under Mechanical / HVAC-R may include but may not be limited to the following:

2.1 Mechanical / HVAC-R

2.1.1 Steam generating and distribution systems and hot water heating systems including: water boilers, pumps, piping, wall fin radiation, boiler controls, accessories, and necessary mechanical and piping insulations.

2.1.2 Chilled and condensed water and distribution systems including water chillers and associated pumps, piping, evaporator coils, computer room air conditioning units, cooling towers, accessories, and necessary mechanical and piping insulations.

2.1.3 Heating, Ventilating, Air Conditioning and Refrigeration (HVAC-R) Systems including Air Handling Systems which include: air handlers, package air conditioning units, condensing units, dry coolers, furnaces, heating ventilation units, fan coil units, humidifiers, dehumidifiers, unit heaters, ductwork and ductwork accessories, and commercial refrigeration systems.

2.1.4 HVAC controls including pneumatic, electric, direct digital control systems and building automation systems; HVAC system testing, adjusting and balancing.

2.1.5 Ventilation and Exhaust systems including exhaust fans, supply fans, range hoods, gravity hoods, pressurization fans, energy recovery ventilators, motorized louvers, and associated equipment.

2.1.6 Compressed Air Systems including air compressors, compressed air receivers and tanks, pressure relief valves, air dryers, piping and accessories as well as testing services such as ultrasonic and hydrostatic testing.

Category 3. Plumbing: NAICS 238220

Work under Plumbing may include but may not be limited to the following:

3.1 Plumbing

3.1.1 Domestic Plumbing systems including water heaters, hot/cold water distribution piping, sanitary water system; bathroom and toilet fixtures and accessories.

3.1.2 Main domestic, sanitary, and fire water utility systems including associated pumps, underground piping, valves and other accessories as may be required.

3.1.3 Hydraulic Systems including vehicle lifts, equipment lifts, man lifts, forklifts, and similar equipment.

3.1.4 Fuel systems including underground and aboveground storage tanks, day tanks, pump skids, fuel lines and hoses, day tank controllers, piping, and accessories.

Category 4. Fire Protection and Suppression: NAICS 238210

Work under Fire Protection and Suppression may include but may not be limited to the following:

4.1 Fire Protection and Suppression

4.1.1 Fire protection and suppression systems including wet/dry sprinkler systems, standpipes, fire hoses, bells, strobes etc.

4.1.2 Main fire water utility systems including associated pumps, underground piping, valves and other accessories as may be required.

Category 5. Electrical: NAICS 238210

Vendor must have a NJ Electrical Contractor license.

Work under Electrical may include but may not be limited to the following:

5.1 General Electrical Work

5.1.1 Medium and High voltage distribution system (5KV to 69KV) – including provision for new and/or repair, testing and maintenance of substations, switchgears, transformers, switches, circuit breakers, protective and coordination control relay systems, overhead and/or underground cabling/wiring systems.

5.1.2 Low voltage distribution systems (600 Volts and below) – including provision for new and/or repair, testing and maintenance of transformers;

motor control centers, switchboards and panelboards; circuit breakers;

switches, receptacles and other devices; wiring in concealed and/or exposed raceways.

5.1.3 Exterior and Interior Lighting Systems – including systems for general, accent and display lighting; emergency, egress and exit lighting;

passive lighting controls including timers, photo, ultrasonic and motion sensors, and network-based computerized controls; outdoor lighting systems for security and personnel safety.

5.1.4 Emergency Power Generation and Distribution Systems – including provision for new and/or repair and maintenance of fixed or portable generators, automatic / manual transfer switches, load banks, switchgear, switchboards and panelboards.

5.1.5 Alternative Energy Systems—including provision of new photovoltaic and wind powered systems, fuel cells, and similar systems, together with associated storage, switching, control, and distribution devices and related subsystems.

5.1.6 Motors, Motor Starters, and Variable Frequency Drives – including provision for new and/or repair and maintenance of electric motors, electric motor starters, variable speed/frequency drives, electronic/pneumatic transducers, and associated equipment.

5.1.7 Electric Vehicles, Forklifts, Man-lifts – including provision for repairs and maintenance of low speed electric vehicles, electric forklifts, and electric man/scissor/boom lifts.

Category 6. Telecommunications: NAICS 237130

Work under Telecommunications may include but may not be limited to the following:

6.1 Telecommunication Systems

6.1.1 Trenching for direct buried, fiber and copper cables.

6.1.2 Installation of manhole and conduit subterranean infrastructure.

6.1.3 Installation of fiber and copper cables as aerial, as direct buried and in subway systems including all building wiring.

6.1.4 Terminating copper and fiber cables (Indoor and Outdoor Enclosures)

6.1.5 Installation of telecommunications equipment

6.1.6 Maintenance, repair and troubleshooting of all telecom systems.

6.2 Fire Detection and Alarm Systems

6.2.1 Provision of conduit/raceway installation

6.2.2 Provision of new devices

6.2.3 Provision of new panels and/or supervisory systems

6.2.4 Software modifications/updates

6.2.5 Startup, Testing, and Troubleshooting services

6.3 Intrusion Detection CCTV and Secured Access Systems

6.3.1 Provision of conduit/raceway systems

6.3.2 Provision of new devices

6.3.3 Provision of new panels and/or supervisory systems

6.3.4 Software modifications/updates

6.3.5 Startup, testing and troubleshooting services

6.4 Audio and Visual Systems

6.4.1 Provision for consulting services

6.4.2 Provision for new components

6.4.3 Installation and startup services

6.4.4 Testing and troubleshooting services

6.5 Environmental Humidity and Temperature Control Systems

6.5.1 Provision for conduit/raceway installation

6.5.2 Provision for new devices

6.5.3 Provision for new panels and/or supervisory systems

6.5.4 Software modifications/updates

6.5.5 Startup, Testing, and Troubleshooting services

6.5.6 UPS Systems and other Specialty Power Systems

6.5.6.1 Provision for equipment procurement

6.5.6.2 Provision for system installation

6.5.6.3 Startup and testing services

6.5.6.4 Diagnostic, troubleshooting and repair services

Category 7. Roofing: NAICS 238160

Work under Roofing may include but may not be limited to the following:

7.1 Roofing installation – including low and steep slope installation of roofing materials such as corrugated metal, asphalt shingle, membrane, shake and shingle, tar and gravel, roll roofing, sheet metal, copper, and galvanized iron.

7.2 Roof applications – include the partial or entire treatment of the roof by painting, spraying, or coating methods. Work includes roof applications for roof preservation such as membranes and solar reflective coatings.

7.3 Roof Repair – includes all work to patch and repair leaks, punctures, holes, cracks, blistering, cracked flashing, improperly sealed valleys, cracked vent booting, and damaged shingles.

7.4 Skylight Installation and Repair – includes initial installation and/or replacement of existing skylight. Repair of skylights consists of the replacement of flashing, glass, weather stripping, cranks, motors, and frames. Contractors are expected to possess knowledge and experience to adequately trouble shoot leaks and associated problems, offer repair solutions, and execute work.

Category 8. Asbestos / Lead Remediation: NAICS 562910

Paragraphs 8.1 and 8.2 apply to asbestos vendors.

Paragraphs 8.3 and 8.4 apply to lead vendors.

Work under Asbestos / Lead Remediation may include but may not be limited to the following:

8.1 Asbestos Abatement – friable and non-friable asbestos including but not limited to: Pipe Insulation, caulking, floor tile, various insulations, Mastic, ceiling tile, Asbestos Coating Material (ACM) etc. Vendor must possess license for asbestos abatement by the NJ Department of Labor and Workforce Development.

8.2 Asbestos Air Monitoring. Vendor must possess certification by NJ Department of Community Affairs as an Asbestos Safety Control Monitoring firm who employs NJ certified Asbestos Safety Technicians.

8.3 Lead abatement services. Vendor must possess certification by the NJ Department of Community Affairs as a lead abatement contractor.

8.4 Lead Removal Services. Vendor must possess certification by the NJ Department of Community Affairs as a lead abatement contractor.

Category 9. Mold Remediation: NAICS 562910

Work under Mold Remediation may include but may not be limited to the following:

9.1 Mold Remediation Services. Vendor must possess a Mold Remediation Specialist (MRS) certification by the Institute of Inspection Cleaning and Restoration Certification (IICRC).

Category 10. Duct Cleaning Services: NAICS 561790

HVAC system cleaning contractor (see Paragraph 10.1 – 10.2) must possess a certification for Air Systems Cleaning Specialist (ASCS) by the National Air Duct Cleaners Association (NADCA).

Work under Duct Cleaning Services may include but may not be limited to the following:

10.1 Cleaning of Building HVAC Systems to include: HVAC Units, hard duct work, flex ductwork, grills, registers.

10.2 Applying encapsulant/anti-microbial coatings to prevent future mold/bacterial growth.

10.3 Mold Remediation Services. Vendor must possess a Mold Remediation Specialist (MRS) certification by the Institute of Inspection Cleaning and Restoration Certification (IICRC) when required by the Task Order.

10.4 Disposal of any removed materials.