Attachment 9 National Stock Number Descriptions.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

ITEM PRODUCT DESCRIPTIONS - KOREA

(IPD)

Table of Contents

Section 1 Pages 2-366 Office Supplies/Packaging Material

135 IPD

Section 2 Pages 367-528 Janitorial/Sanitation/General Supplies 95 IPD

Section 3 Pages 529-663 Hardware/Maintenance Repair Operation Supply 89 IPD

Section 4 Pages 664 -770 Furniture/Housewares 12 IPD

Section 5 Pages 771 - 777 Ability One 338 NSN/IPD

5820-01-518-3622 UI: SE

RECEIVER-TRANSMITTER, RADIO

DESCRIPTION

ITEM NAME RADIO, RECEIVER-TRANSMITTER (WALKIE TALKIE),

FRS/GMRS

PRODUCT HEIGHT 7.00 INCHES (+/- 3.00 IN. (UNIT)

0.875 INCHES (+/- 0.25 IN.) (DISPLAY)

PRODUCT WIDTH 3.25 INCHES (+/- 1.00 IN.) (UNIT)

1.25 INCHES (+/- 0.2. IN) (DISPLAY)

PRODUCT DEPTH 1.75 INCHES (+/- 0.75 IN.)

BASIS WEIGHT 1.00 POUNDS MAXIMUM (UNIT)

4.00 POUNDS NOMINAL (SET)

DISPLAY TYPE LCD

DISPLAY LIGHTING BACKLIT

MIC AND HEADPHONE JACKS INCLUDED

FREQUENCY 462.550 ~ 467.7125 MHz

WEATHER FREQUENCY 162.400 TO 163.275 MHz

NOAA WEATHER ALERT RADIO INCLUDED

WEATHER SCAN INCLUDED

RANGE 30 MILES OR BETTER

TRANSMIT POWER MAXIMUM ALLOWED BY LAW

CHANNEL QUANTITY 22 FRS AND GMRS (MINIMUM)

VOX LEVELS 5 MINIMUM

RoHS COMPLIANT YES

CERTIFICATION FCC CERTIFICATION PART 95

ALERTS VIBRATE ALERT

ROGER BEEP TO INDICATE CALL COMPLETION

AUDIBLE KEYSTROKE TONES

PRIVACY CODES 38 CTCSS, 104 DCS (142 MINIMUM, 3124 CHANNEL

OPTIONS)

SILENT OPERATION INCLUDED

CHANNEL SCAN INCLUDED

MONITORING FEATURE INCLUDED

DIRECT CALL FEATURE INCLUDED

AUTO SQUELCH INCLUDED

KEYPAD LOCK INCLUDED

POWER SUPPLY RECHARGEABLE BATTERIES (NiMH OR LITHIUM ION)

RECHARGEABLE BATTERIES INCLUDED

NONRECHARGEABLE BATTERIES NOT INCLUDED

TRANSMIT POWER SETTINGS HIGH AND LOW

CHARGER COMPATIBILITY DROP-IN CHARGER COMPATIBLE

INCLUDED IN SET ONE (1) PAIR OF RADIOS

BELT CLIPS

AC CHARGER / DC ADAPTER

RECHARGEABLE BATTERY PACKS

PAIR OF BOOM MIC HEADSETS

ENVIRONMENTAL PROCTECTION JIS4 WATER RESISTANCE (MINIMUM)

SPECIAL MARKINGS: In addition to normal commercial markings, each packaged set shall contain a label with the following text:

FRS Frequencies use: Federal government entities are authorized to purchase and operate radios certified by the FCC in the Family Radio Service (FRS), pursuant to Part 95 Subpart B of the FCC Rules and Regulations (Title 47, Code of Federal Regulations). Government users will be accorded the same privileges as non-federal users. Because FRS users must share each channel and no user is assured protection from interference caused by another authorized user, Federal entities may not purchase and operate FRS radios for planned communications operations that safeguard human life or property.

GMRS Frequencies use: Use of GMRS Frequencies requires an FCC license. It is the responsibility of the user to file for an appropriate FCC License. Per Title 47 CFR, Part 95 Subpart A Section 95.5, an individual is eligible to be licensed, but a non-individual (an entity other than an individual) is ineligible to obtain a GMRS license.

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

7510-00-551-9825 UI: RO

TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

In accordance with A-A-113D, Dated December 4, 1996: Commercial Item Description covers transparent and colored pressure-sensitive adhesive tape which is intended for temporary mending and attaching, temporary identification, charting and decorating.

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

I.A.W. TYPE: II - MATTE FINISH

CLASS: A - TRANSPARENT CELLULOSE ACETATE OR

POLYOLEFIN BACKING

OVERALL WIDTH 0.750 INCHES

OVERALL LENGTH 36.00 YARDS

OVERALL CORE DIAMETER 1.000 INCHES

OVERALL THICKNESS 0.002 INCHES

USAGE FORM ROLL

OVERALL COLOR COLORLESS

OVERALL MATERIAL PLASTIC

MATERIAL TRANSPARENCY CLEAR

SURFACE LUSTER MATTE

ADHESIVE TYPE ACRYLIC

ADHESIVE LOCATION ONE SIDE

DISPENSER NOT INCLUDED

SPECIAL FEATURE CAN BE WRITTEN ON WITH PEN, PENCIL OR MARKER

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

SHELF LIFE

ITEM: Tapes, Pressure Sensitive, Adhesive

Type II: Extendable

Age on Delivery: 2 Months

Shelf Life Code: 4 (12 Months Extendable Shelf Life)

Tapes shall be delivered within two (2) months after the date of manufacture and have a shelf life of twelve (12) months after the date of manufacture. After twelve (12) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-00-816-8077 UI: RO

TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

IN ACCORDANCE WITH FEDERAL SPECIFICATION L-T-80,(Latest version). THIS SPECIFICATION

ESTABLISHED THE REQUIREMENTS FOR AN ALUMINUM FOIL BACKED PRESSURE SENSITIVE

ADHESIVE TAPE DESIGNED FOR USE IN SEALING APPLICATIONS WHERE THE PROPERTIES

OF GOOD WEATHER RESISTANCE, REFLECTIVITY, AND MOISTURE VAPOR TRANSMISSION

RESISTANCE ARE REQUIRED.

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

I.A.W. TYPE I - ALUMINUM FOIL BACKED PRESSURE-

SENSITIVE ADHESIVE TAPE - NO RELEASE LINER

OVERALL WIDTH 3.00 INCHES

OVERALL LENGTH 60 YARDS

CORE DIAMETER 3.00 INCHES

OVERALL THICKNESS 0.005 INCHES

OVERALL COLOR SILVER

OVERALL MATERIAL ALUMINUM

MATERIAL TRANSPARENCY OPAQUE

SURFACE LUSTER GLOSSY

ADHESIVE LOCATION ONE SIDE

MINIMUM TENSILE STRENGTH 26 LBS PSI

TEMPERATURE RATING -65 DEG FAHRENHEIT MIN TO 300 DEG FAHRENHEIT MAX

ENVIRONMENTAL PROTECTION WATER RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each roll shall be individually packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not exceed 51 pounds in weight.

SHELF LIFE

ITEM: Postage Meter Tape

Type II: Extendable

Shelf Life Code: 6 (24 Months Extendable Shelf Life)

Tapes shall have a shelf life of twenty four (24) months after the manufacture date. After twenty four

(24) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each unit package and intermediate container shall be marked with the date of manufacture, and expiration or inspection date, as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-300-2127 UI: RO

TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

OVERALL WIDTH 4.000 INCHES

OVERALL LENGTH 10.00 YARDS

OVERALL THICKNESS 0.036 INCHES I.A.W. ASTM-D3652

USAGE DESIGN FOR USE AS MASKING AND PROTECTING AIRCRAFT

SKINS DURING DRY MEDIA BLAST PAINT REMOVAL

OVERALL COLOR GREEN

OVERALL MATERIAL RUBBER SYNTHETIC BASIC

ADHESIVE MATERIAL TRANSPARENT ACRYLIC

MATERIAL TRANSPARENCY TRANSLUCENT

ADHESION TO STEEL 27 OZ/IN WIDTH I.A.W. ASTM D-3330

TENSILE STRENGTH 25 LB/IN I.A.W. ASTM D-3330

ADHESIVE LOCATION ONE SIDE

ADHESIVE TYPE TRANSPARENT ACRYLIC WITH SPECIALLY

COMPOUNDED GREEN RUBBER BACKING

RELEASE LINER PROVIDED

RELEASE LINER TYPE REVERSE WOUND

RELEASE LINER COLOR TAN

RELEASE LINER MATERIAL SILICONE

TEMPERATURE RATING 40 DEGREES MIN TO 120 DEGREES MAX FAHRENHEIT

STORAGE 60 TO 80 DEGREES F, 40 TO 60% RELATIVE

HUMIDITY

SPECIAL FEATURE MUST BE ABLE TO WITHSTAND PLASTIC MEDIA BLAST

(PMB) PAINT REMOVAL OPERATIONS. MUST MEET

ASTM TEST METHODS (D-3759, D-3652 AND D-3330).

ENVIRONMENTAL PROTECTION HEAT AND COLD RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each roll shall be individually packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not exceed 51 pounds in weight.

SHELF LIFE

ITEM: Tapes, Pressure Sensitive, Adhesive

Type II: Extendable

Age on Delivery: 2 Months

Shelf Life Code: 4 (12 Months Extendable Shelf Life)

Tapes shall be delivered within two (2) months after the date of manufacture and have a shelf life of twelve (12) months after the date of manufacture. After twelve (12) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-455-0022 UI: PG

TAB, SIGNAL

DESCRIPTION

ITEM NAME TAB, SIGNAL

TAB WIDTH 0.50 INCHES

TAB LENGTH 1.75 INCHES

UNIT TYPE PRINTED FLAGS

UNIT SHAPE ARROW

UNIT DESIGN PAGE MARKER

OVERALL COLOR ASSORTED - RED, GREEN, BLUE AND YELLOW

OVERALL MATERIAL PLASTIC

LEGEND INSCRIPTION SIGN & DATE

LEGEND INSCRIPTION COLOR BLACK

DISPENSER INCLUDED

UNIT PACKAGE QUANTITY 20 FLAGS PER DISPENSER,

4 SIGNAL TAB DISPENSERS (80 FLAGS TOTAL)

PER PACKAGE

PACKAGING/PACKING: Four (4) signal tab dispensers (totaling 80 flags) per package shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

PACKAGING/PACKING

SHELF LIFE

ITEM: Repositionable Tape Flag

Type II: Extendable

Shelf Life Code: 6 (24 Months Extendable Shelf Life)

Repositionable Tape Flag shall be delivered within three (3) months after the manufacture date, and have a shelf life of twenty four (24) months after the manufacture date. After twenty four (24) months, the government entity purchasing the item from GSA reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each item and/or intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-545-5830 UI: EA

CARTRIDGE, TONER

DESCRIPTION

ITEM NAME CARTRIDGE, TONER

I.A.W. HEWLETT PACKARD P/N Q5951A

CARTRIDGE TYPE NEW (OEM GENUINE)

SPECIAL FEATURE STANDARD YIELD CARTRIDGE FOR USE WITH HP

COLOR LASERJET 4700 SERIES PRINTERS AND ALL OTHER

LASER PRINTERS THAT USE HP CARTRIDGE Q5951A

COLOR CYAN

YIELD 10,000 PAGES (AVERAGE YIELD IAW ISO/IEC 19798)

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

QUALITY ASSURANCE

commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

STORAGE INSTRUCTIONS: To maximize the life of the laser printer toner cartridges, it is highly recommended that this item be stored between 5 to 32.2 Deg. C (41 to 90 Deg. F) and between 10 to 90% relative humidity (temperature/humidity controlled conditions).

practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

6645-00-250-4680 UI: EA

STOPWATCH

DESCRIPTION

ITEM NAME STOPWATCH

OVERALL DIAMETER SIZE 2.000 INCHES

OVERALL THICKNESS 0.500 INCHES

MINIMUM JEWEL QUANTITY 7

MAXIMUM BASIS WEIGHT 1 POUND

GRADUATION UNIT 1.000 MINUTE AND 0.200 (1/5) SECOND

TOTAL READER TIME 30 MINUTES

SCALE NAME MINUTE TOTALIZING AND SECONDS

SCALE QUANTITY 2

SCALE RANGE +0.00 / +30.00 MINUTE AND +0.00/ +60.00

SECOND

TOTALIZER DIAL RANGE +0.00 / +30.00 IN MINUTES

SWEEP HAND QUANTITY 1

MOVEMENT SIZE DESIGNATION 16

CASE MATERIAL ANY ACCEPTABLE

CASE SURFACE TREATMENT ANY ACCEPTABLE

JEWEL TYPE NATURAL OR SYNTHETIC SAPPHIRE, RUBY OR

GARNET

WATCH TYPE SINGLE ACTION

BEZEL TYPE ANY ACCEPTABLE

CRYSTAL TYPE ANY ACCEPTABLE

FACE TYPE OPEN POCKET

OVERALL BACKGROUND COLOR WHITE

OVERALL CRYSTAL COLOR CLEAR, UNCOLORED

INSCRIPTION COLOR ANY ACCEPTABLE

MAJOR GRADUATION COLOR ANY ACCEPTABLE

MINOR GRADUATION COLOR ANY ACCEPTABLE

DIAL BACKGROUND COLOR WHITE ENAMEL

DIAL NUMERAL COLOR BLACK

DIAL SCALE MARKING COLOR ANY ACCEPTABLE

DIAL SCALE MARKING LUMINOSITY NON-LUMINOUS

SEPARATE TOTALIZER DIAL INCLUDED

WINDING METHOD STEM

STEM OPERATION CONSECUTIVE CROWN DEPRESSIONS FOR

STOP, START AND RETURN TO ZERO

MOVEMENT TYPE CONTINUOUS RUNNING

NON-MAGNETIC CHARACTERISTIC INCLUDED

ESCAPEMENT TYPE ANY ACCEPTABLE

SUBMERSIBILITY NON-SUBMERSIBLE

SHOCKPROOF FEATURE INCLUDED

WATER RESISTANT FEATURE INCLUDED

STRIKING MECHANISM NOT INCLUDED

CIVIL DATE INDICATOR NOT INCLUDED

LUMINOUS DIAL NOT INCLUDED

LUMINOUS HAND NOT INCLUDED

LUMINOUS NUMERAL NOT INCLUDED

SPECIAL FEATURE USED FOR LABORATORIES AND GEOLOGICAL SURVEYS

IN AREAS OF HIGH HUMIDITY AND DUST

ENVIRONMENTAL PROTECTION DUST, WATER, ANIT-MAGNETIC, SHOCK, CORROSION AND

EROSION RESISTANT CAUSED BY ACIDS

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-573-0059 UI: EA

CARTRIDGE, TONER

DESCRIPTION

ITEM NAME CARTRIDGE, TONER

I.A.W. HP PN CE253A (HP 504A)

CARTRIDGE TYPE NEW (OEM GENUINE)

SPECIAL FEATURES STANDARD YIELD CARTRIDGE FOR USE WITH HP LASERJET

CP3525/CM3530 SERIES PRINTERS, INCLUDING CP3525dn, P3525n, P3525x, CM3530, CM3530fs OR ANY OTHER PRINTER

THAT USES HP

P/N CE253A (HP 504A)

COLOR MAGENTA

YIELD 7,000 PAGES (AVERAGE YIELD IAW ISO/IEC 19798)

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

07.pdf

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

STORAGE INSTRUCTIONS: To maximize the life of the laser printer toner cartridges, it is highly recommended that this item be stored between 5 to 32.2 Deg. C (41 to 90 Deg. F) and between 10 to 90% relative humidity (temperature/humidity controlled conditions).

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-573-0114 UI: EA

CARTRIDGE, TONER

ITEM NAME CARTRIDGE, TONER

I.A.W. HEWLETT PACKARD P/N CE252A (HP 504A)

CARTRIDGE TYPE NEW (OEM GENUINE)

SPECIAL FEATURE STANDARD YIELD CARTRIDGE FOR USE WITH HP COLOR

LASERJET CP3525/CM3530 SERIES PRINTERS INCLUDING

CP3525dn, P3525n, P3525x, CM3530, CM3530fs AND ANY

OTHER PRINTER USING HP P/N CE252A (HP 504A)

COLOR YELLOW

YIELD 7,000 PAGES (AVERAGE YIELD IAW ISO/IEC 19798)

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

STORAGE INSTRUCTIONS: To maximize the life of the laser printer toner cartridges, it is highly recommended that this item be stored between 5 to 32.2 Deg. C (41 to 90 Deg. F) and between 10 to 90% relative humidity (temperature/humidity controlled conditions).

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-573-0115 UI: EA

CARTRIDGE, TONER

DESCRIPTION

ITEM NAME CARTRIDGE, TONER

I.A.W. HEWLETT PACKARD PN CE251A (HP 504A)

CARTRIDGE TYPE NEW (OEM GENUINE)

SPECIAL FEATURES STANDARD YIELD CARTRIDGE FOR USE WITH HP COLOR

LASERJET CP3525/CM3530 SERIES PRINTERS INCLUDING

CP3525dn, P3525n, P3525x, CM3530, CM3530fs AND ANY

OTHER PRINTER USING HP CARTRIDGE CE251A (HP 504A)

COLOR CYAN

YIELD 7,000 PAGES (AVERAGE YIELD IAW ISO/IEC 19798)

and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

STORAGE INSTRUCTIONS: To maximize the life of the laser printer toner cartridges, it is highly recommended that this item be stored between 5 to 32.2 Deg. C (41 to 90 Deg. F) and between 10 to 90% relative humidity (temperature/humidity controlled conditions).

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7025-01-503-8608 UI: EA

MOUSE, DATA ENTRY

ITEM NAME MOUSE, DATA ENTRY

OVERALL WIDTH 2.60 INCHES (+/- 0.40 INCHES)

OVERALL HEIGHT 1.75 INCHES (+/- 0.50 INCHES)

OVERALL LENGTH 4.50 INCHES (+/- 0.50 INCHES)

OVERALL COLOR SILVER / BLUE, SILVER / BLACK OR BLACK

CONNECTIVITY TYPE USB; WIRELESS

WHEEL TYPE CLICKABLE SCROLL WHEEL

BUTTON QUANTITY 5 BUTTONS INCLUDING TWO EXTRA SIDE BUTTONS

FOR WEB PAGE NAVIGATION

SPECIAL FEATURE OPTICAL TECHNOLOGY (LED OR EQUAL); MOUSE

BUTTON

FUNCTIONS ARE USER PROGRAMABLE

INCLUDES WIRELESS USB RECEIVER

2 AAA OR AA BATTERIES

COMPATIBILITY WINDOWS XP, VISTA, 7 AND 8

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military included for both civilian and military destinations.

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7045-01-412-5317 UI: EA

PAD, MOUSE

DESCRIPTION

ITEM NAME PAD, MOUSE

OVERALL WIDTH 8.000 INCHES TO 10.00 INCHES

OVERALL LENGTH 9.500 INCHES TO 12.00 INCHES

WRIST PAD THICKNESS 1.000 INCHES (+ 0.500 INCH / - 0.30 INCH)

MOUSE PAD…