Amendment 2 Continuation Pages (Korea).docx

47QSCC20R0011 AMENDMENT 0002 SF 30 CONTINUATION PAGES

a) THE FOLLOWING LANGUAGE UNDER SECTION E.6.1 OF THE SOLICITATION DOCUMENT AND THE SAME LANGUAGE IN AMENDMENT 0002, IS HEREBY CHANGED WITH THE FOLLOWING TRACKED CHANGES:

E.6.1 General Instructions

a) Phase I proposal documents (Volumes 1 and 2) shall be submitted electronically via email to Dominic.Lackey@gsa.gov and Michael.Sheckels@gsa.gov by February 25 March 3, 2020 at 10:00 AM, EST. All volumes required for the Phase I evaluation must be received timely or the proposal as a whole may be considered late.

b) Phase II proposal documents (Volumes 3 and 4) shall be submitted via email to Dominic.Lackey@gsa.gov and Michael.Sheckels@gsa.gov at a time and date when notified by the CO. Instructions on when to submit proposal volumes under the Phase II evaluation will be provided at the time offerors are notified via email of the outcome of their Phase I evaluation.

c) Offerors shall submit their Phase I and II proposal documents in soft copy electronic version. All documents should be in Microsoft Office 2007 or Adobe Acrobat 9.4 or later, in a searchable format. Electronic proposal documents shall be consolidated by volume. If documents cannot be grouped within one *.zip file and/or one email, offerors may use multiple emails provided they label each email “Email X of X” (ex. “Email 1 of 3”).

d) GSA accepts no responsibility and shall not be held liable for incomplete and/or late proposal submissions due to technical difficulties in transmission of messages and/or documents exceeding the 25MB per email limit. It is recommended that offerors not wait until the last day/hour proposals are due to attempt their proposal submission.

e) Communications and comments concerning the contents of this RFP shall be accepted no later than 10:00 AM on February 7, 2020 in the following link only:

https://docs.google.com/forms/d/1ptaur1mtGtu1ukVqhyOj1dFgEPO6aGsa1ipf-h4D_CY/edit. Questions received and GSA’s responses will be posted to www.beta.sam.gov at regular intervals during the proposal period. Identities of prospective Offerors asking questions will not be disclosed and any proprietary information contained within questions will be redacted. Questions should cite the section, paragraph number and page number in question within the RFP. Statements expressing opinions, sentiments, or conjectures are not considered valid inquires or comments and will not receive a response from GSA. Furthermore, offerors are reminded that GSA will not address hypothetical or scenario-based questions or questions aimed toward receiving potential “evaluation decisions” from GSA.

f) All volumes are to be prepared as separate files. Technical proposals must not contain any pricing information; do not cross-reference material submitted in the technical proposal with the price proposal, and vice versa. Information provided shall be concise, complete, and shall demonstrate a thorough understanding of the requirements as described in Attachment 2 of this solicitation. It is imperative that offerors thoroughly read and understand the Performance Work Statement when preparing and submitting proposals. Proposals that merely restate the government’s requirements or offer to conduct a program in accordance with the government’s requirements without going into further detail will not be considered acceptable and will not receive further consideration. Similarly, over generalizations and phrases such as “standard procedures will be employed” or “well-known techniques will be used” are also not acceptable.

g) Offerors are cautioned that the use of any format other than the one described in this section could result in the evaluation board’s inability to give maximum ratings.

h) When evaluating an offeror’s capability to perform the prospective contract, the government will also consider how well the offeror complied with proposal submission instructions. Offers should contain the contractor’s best terms from a technical and price standpoint.

i) Should the offer include any standard company terms and conditions that conflict with the terms and conditions of the solicitation, the offer may be determined “unacceptable” and thus ineligible for contract award. Should the offeror have any questions related to specific terms and conditions, these should be resolved prior to submission of the offer.

j) The government will not be liable for any costs associated with the development, preparation, transmittal, or presentation of any proposal or material submitted in response to this RFP. The proposal and all materials submitted by the offeror in connection with this RFP shall become the property of the government.

b) THE FOLLOWING LANGUAGE IS CHANGED IN ATTACHMENT 3 TO UPDATE THE NSN’S :

NSN’s 7490013953355 and 7490013906163 are updated to reflect they are no longer mandatory sourced items.

c) THE FOLLOWING LANGUAGE IS INSERTED INTO ATTACHMENT 9 TO UPDATE THE NSN’S :

NSN’s 7490013953355 and 7490013906163 are added to Attachment 9 with each having the following descriptions.

7490-01-390-6163 UI: EA

SHREDDING MACHINE, PAPER

DESCRIPTION

ITEM NAME SHREDDING MACHINE, PAPER:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7490-01-395-3355 UI: EA

SHREDDING MACHINE, PAPER

DESCRIPTION

ITEM NAME SHREDDING MACHINE, PAPER

I.A.W. NSA / CSS SPECIFICATION 02-01

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

d) THE Q&A HAS BEEN UPDATED WITH TO CORRECT ANSWER TO QUESTION NUMBER 34 (line35).

END OF CONTINUATION PAGES