36A79718Q0008-00001001.xlsx

Consolidation Report 00001

Questions & Answers

If yes, can we acquire a serial number and model number of current transducers/probes on that trade unit

b. YES for 17x17 wall stand and yes for the 14x17 table 20 687-B80523 a. - Is auto positioning of overhead ceiling suspension required? - Is a 10 x 12 DR detector required? b.In addition to the 17 x 17 fixed (for wall stand) and 14 x 17 (for table) a. YES auto postioning of overhead, and a wireless 10x12 DE detector

b. YES for 17x17 wall stand and yes for the 14x17 table 20 687-B80524 a. is ceiling suspension to be auto positioning/motorized? B. Is a 14x17 Wireless detector required? In addition to the 17x17 fixed (for wall stand) c. Is robotic stitching for scholi & leg length required? a. YES auto postioning of overhead

b. YES for 17x17 wall stand and yes for the 14x17 table

c. No Robotic stitching is not required

b. There are multiple vendor who can meet this requirement.

b. There are multiple vendor who can meet this requirement.

b. There are multiple vendor who can meet this requirement.

23 618-B89007 Requesting the following additional trade-in information: a. Scan seconds on tube b.Date of last tube replacement c.Expected date of de-installation a. slice counter from 5/15/2017 was 497004

b. tube replaced 5/17/2017

c. Sept. 2019 23 618-B89008 Requesting the following additional trade-in information: a. Scan seconds on tube b.Date of last tube replacement c.Expected date of de-installation a. slices as of 5/3/2018 = 147453

b. tube replaced Sep 2017

c. Sept. 2019 23 618-B89009 Requesting the following additional trade-in information: a. Scan seconds on tube b.Date of last tube replacement c.Expected date of de-installation a. The scan/seconds for the most recently replaced tube - 60,207 seconds.

b. tube replaced 4/14/2017

c. Sept. 2019 23 618-B89007 a. Can you please identify the last tube replacement date? Also, how many scan seconds on the tube or utilization data? B.• Is a Full System UPS required or are you looking for a UPS that will safely provide coverage to shut the system down in case of a power outage? c.• The benchmark quotes requests travel and living, we understand that all off site training should be quoted in options, however should the requirement for Travel and Living expenses be removed from the benchmark since this service is not on vendors contracts? d. • CT scanner technical requirements item #5 references a minimum detector width of 60mm, however, item #9 requests the “longest z-axis acquisition per rotation”. Is the expectation that the system meets the specification referenced in item #5 or should the system proposed meet the specification in item #9 which would reference a much larger detector. a. slice counter from 5/15/2017 was 497004, tube replaced 5/17/2017

b. full UPS is required per our spec #18

c. The travel and lodging will remain in the specifications document as it is a requirement. The NAC will remove those from the order however the station uses that information to ensure that 1.) training is available and 2.) cost so that we can budget appropriately. Please put them in the optional section.

d. The expectation is that the solution meets all of the minimum specifications (both #5 and #9). It may been that a solution would exceed one specification to minimally meet another specification.

23 618-B89008 a. Can you please identify the last tube replacement date? Also, how many scan seconds on the tube or utilization data? B.• Is a Full System UPS required or are you looking for a UPS that will safely provide coverage to shut the system down in case of a power outage? c.• The benchmark quotes requests travel and living, we understand that all off site training should be quoted in options, however should the requirement for Travel and Living expenses be removed from the benchmark since this service is not on vendors contracts? d. • CT scanner technical requirements item #5 references a minimum detector width of 60mm, however, item #9 requests the “longest z-axis acquisition per rotation”. Is the expectation that the system meets the specification referenced in item #5 or should the system proposed meet the specification in item #9 which would reference a much larger detector. a. slices as of 5/3/2018 = 147453, tube replaced Sep 2017

b. full UPS is required per our spec #18

c. The travel and lodging will remain in the specifications document as it is a requirement. The NAC will remove those from the order however the station uses that information to ensure that 1.) training is available and 2.) cost so that we can budget appropriately. Please put them in the optional section.

d. The expectation is that the solution meets all of the minimum specifications (both #5 and #9). It may been that a solution would exceed one specification to minimally meet another specification.

23 618-B89009 a. Can you please identify the last tube replacement date? Also, how many scan seconds on the tube or utilization data? B.• Is a Full System UPS required or are you looking for a UPS that will safely provide coverage to shut the system down in case of a power outage? c.• The benchmark quotes requests travel and living, we understand that all off site training should be quoted in options, however should the requirement for Travel and Living expenses be removed from the benchmark since this service is not on vendors contracts? d. • CT scanner technical requirements item #5 references a minimum detector width of 60mm, however, item #9 requests the “longest z-axis acquisition per rotation”. Is the expectation that the system meets the specification referenced in item #5 or should the system proposed meet the specification in item #9 which would reference a much larger detector. a. The scan/seconds for the most recently a. replaced tube - 60,207 seconds, tube replaced 4/14/2017

b. full UPS is required per our spec #18

c. The travel and lodging will remain in the specifications document as it is a requirement. The NAC will remove those from the order however the station uses that information to ensure that 1.) training is available and 2.) cost so that we can budget appropriately. Please put them in the optional section.

d. The expectation is that the solution meets all of the minimum specifications (both #5 and #9). It may been that a solution would exceed one specification to minimally meet another specification.