3-U46 Kimball Middle School Lower Level Design Drawings 021926.pdf

PDF 4 MB Posted Mar 9, 2026

Attached to: KIMBALL MS CAPITAL IMPROVEMENT PROJECT AND LOWER LEVEL ABATEMENT
Solicitation number: 425- 25/26
Issued by: Kane County, Illinois

About this file

Written by GovTribe AI · Mar 19, 2026

Summary of Environmental Abatement Design Drawings for Kimball Middle School

This document comprises design drawings prepared by Weaver Consultants Group for the School District U-46 environmental abatement project at Kimball Middle School, located at 451 North McLean Boulevard, Elgin, Illinois. The project involves the removal and disposal of asbestos-containing materials (ACM) and mold-impacted fiberglass thermal system insulation from the basement level of the facility. The scope of work includes identification of approximate locations for asbestos-containing and non-asbestos-containing thermal system insulation removal, asbestos-containing window caulk and glaze removal, and the installation of containment barriers. The drawings indicate specific locations for five worker decontamination units and two waste-out chambers, along with negative air exhaust placements. Work must comply with applicable IDPH, EPA, and OSHA regulations, with particular reference to IDPH section 855.430(a) and (b) regarding barrier construction specifications. The contract includes a base bid and three alternate bid options (Alternate Bids #1, #2, and #3), each covering different scope variations across the basement areas.

The design drawings specify that ceiling grid in boys' and girls' toilet rooms shall remain in place, while the abatement contractor is responsible for demolishing ceilings to access thermal system insulation located above and must include all ceiling materials in their entirety as ACM waste. Contractors must provide temporary lighting as necessary and are required to field verify quantity and locations of materials to be removed. All removal activities must include thorough cleaning of surfaces and proper debris removal. The project number is 4366-344-60-01, and drawings were prepared under the supervision of designer David J. Kedrowski (IDPH #100-04543) on February 19, 2026. The designs are the property of Weaver Consultants Group and require written authorization for reuse.

View the file

Other files

File	Type	Posted
1-INVITATION TO BID Kimball MS Capital Project and Lower Level Abatement.docx (1).pdf	PDF	Mar 9, 2026
2-U46 Kimball Middle School 2026 Capital Improvement Project Design Drawings 021926.pdf	PDF	Mar 9, 2026
4-Zoom Credentials Bid Opening.docx (70).pdf	PDF	Mar 9, 2026
5-Kimbal MS Capital Improvement Project and Lower Level Abatement (1).docx (1).pdf	PDF	Mar 9, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PRJ#:

DATE:

DRAWN BY:

REVIEWED BY:

4366-344-60-01 02/19/2026

CRM

W ea ve r

Co ns ul ta nt s

Gr ou p

FIGURE:

DCG

LAYOUTFIGURESFILE:

F O

DESIGNER NAME:

DAVID J. KEDROWSKI

IDPH #100-04543

NOT TO SCALE

KEYNOTES:

GENERAL NOTES:

1. Locations are approximate. Abatement contractor shall field verify quantity and locations.

2. Abatement contractor responsible for demolition of ceiling to access thermal system insulation located above. Removal and disposal shall include ceiling materials in their entirety.

3. Contractor shall provide temporary lighting as necessary.

4. Ceiling grid in Boy's and Girl's Toilet Rooms to remain.

5. Removal of mold impacted non-asbestos containing fiberglass thermal system insulation within the tunnels includes removal of all debris and a thorough cleaning of all surfaces.

SCOPE OF WORK:

Indicates approximate location of asbestos containing and non-asbestos containing thermal system insulation removal. Removal and disposal includes ceiling materials in their entirety as ACM waste.

Indicates approximate location of mold impacted non-asbestos containing fiberglass thermal system insulation removal.

Indicates approximate location of mold impacted non-asbestos containing fiberglass thermal system insulation removal. Removal and disposal includes ceiling materials in their entirety.

Indicates approximate location of asbestos containing window caulk and glaze removal.

Indicates approximate location of five (5) chamber worker decontamination unit.

Indicates approximate location of two (2) chamber waste-out.

Install airtight barrier constructed of rigid framing with a maximum on-center spacing of 24 inches, 12" plywood sheathing, and two layers of 6-mil polyethylene sheeting applied to abatement work area side.

Barrier shall be constructed as detailed in IDPH section 855.430(a).

Install barrier constructed of rigid framing with a maximum on-center spacing of 24 inches and 12" plywood sheathing. Barrier shall be constructed as detailed in IDPH section 855.430 (b).

Contractor to secure doorway and control access.

Indicates approximate location of negative air exhaust.

REUSE OF THIS DOCUMENT

AND THE DESIGNS

INCORPORATED HEREIN, AS AN

INSTRUMENT OF PROFESSIONAL

SERVICE, IS THE PROPERTY OF

WEAVER CONSULTANTS GROUP,

AND IS NOT TO BE USED IN

WHOLE OR IN PART, WITHOUT

THE WRITTEN AUTHORIZATION

OF WEAVER CONSULTANTS

WEAVER CONSULTANTS GROUP.

www.wcgrp.com

WEAVER CONSULTANTS GROUP

1316 BOND STREET, SUITE 108

NAPERVILLE, ILLINOIS 60563

(630) 717-4848

OFFICE LOCATION:

Removal and disposal of asbestos containing and non-asbestos containing thermal system insulation per specification and applicable IDPH, EPA, and OSHA rules and regulations.

O L

U -4

O N

, I

O L

N O

B O

N , I

ENV-01

- B

BASE BID

AutoCAD SHX Text

NAE