21R0009 Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

W9098S21R0009 20-Apr-2021

b. TELEPHONE NUMBER

309-782-5149

8. OFFER DUE DATE/LOCAL TIME

02:30 PM 20 May 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W9098S9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JOHN E. JACOBSEN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

ROCK ISLAND ARSENAL (ACC-RI)

3055 RODMAN AVENUE

ROCK ISLAND IL 61299-8000

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

333515

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF98

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W9098S21R0009

Section SF 1449 - CONTINUATION SHEET

SOLICITATION NARRATIVE

ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL

1. The Army Contracting Command – Rock Island (ACC-RI) hereby issues the solicitation, W9098S21R0009 for the supply of various types of tools in support of the Metal Working and Machining Shop Set (MWMSS) program at the Rock Island Arsenal, Joint Manufacturing and Technology Center (RIA-JMTC). The solicitation is issued in accordance with FAR Part 12 (Acquisition of Commercial Items) and FAR Part 15 (Contracting by Negotiation).

The Government intends to evaluate proposals and issue an award without discussions with Offerors (except for clarifications as described in FAR 15.306(a))

The result of this solicitation will be a Firm Fixed Price 5-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract (see FAR 16.504) with the following ordering periods:

Ordering Period 1 – date of award to 365 days Ordering Period 2 – 366 days to 730 days Ordering Period 3 – 731 days to 1,095 days Ordering Period 4 – 1,096 days – 1,460 days Ordering Period 5 – 1,461 days – 1,825 days

The following is a list of Attachments that must be completed:

Attachment 0001 – Price Matrix Attachment 0002 – Warranty Information

2. The actual dates will be clarified at the time of award. The total minimum and maximum quantities for each CLIN are listed in the table below. These guaranteed minimum quantities are the only guaranteed quantities to be awarded under this solicitation. The Government is under no further obligation to order additional quantities on any CLIN. Except for the minimum guaranteed quantity, all quantities are estimates and do not bind the Government in any way.

CLIN

Number

Item Description Minimum Qty

MAXIMUM QTY

0001 Cabinet B, Drawer 1 2 113

0002 Cabinet B, Drawer 2 2 113

0003 Cabinet B, Drawer 3 2 113

0004 Cabinet B, Drawer 4 2 113

0005 Cabinet B, Drawer 5 2 113

0006 Cabinet B, Drawer 6 2 113

0007 Cabinet B, Drawer 7 2 113

0008 Cabinet B, Drawer 8 2 113

0009 Cabinet B, Drawer 9 2 113

0010 Cabinet B, Drawer 10 2 113

0011 Cabinet B, Drawer 11 2 113

0012 Cabinet B, Drawer 12 2 113

0013 Cabinet B, Drawer 13 2 113

0014 Cabinet B, Shelf 1 2 113

0015 Cabinet C, Drawer 1 2 113

0016 Cabinet C, Drawer 2 2 113

0017 Cabinet C, Drawer 3 0 113

0018 Cabinet C, Drawer 4 2 113

0019 Cabinet C, Drawer 5 2 113

0020 Cabinet C, Drawer 6 2 113

0021 Cabinet C, Drawer 7 2 113

0022 Cabinet C, Drawer 8 2 113

0023 Cabinet C, Drawer 9 2 113

0024 Cabinet C, Drawer 10 2 113

0025 Cabinet C, Shelf 1 2 113

0026 Cabinet c, shelf 2 22 113

0027 Cabinet D, Drawer 2 2 113

0028 Cabinet D, Drawer 4 2 113

0029 Cabinet E, Shelf 1 2 113

0030 Cabinet E, Shelf 2 2 113

0031 Cabinet F, Drawer 1 17 113

0032 Cabinet F, Drawer 2 17 113

0033 Cabinet F, Drawer 3 15 113

0034 Cabinet F, Drawer 4 18 113

0035 Cabinet G, Drawer 2 17 113

0036 Cabinet G, Drawer 3 17 113

0037 Cabinet G, Drawer 4 17 113

0038 Cabinet G, Drawer 5 17 113

0039 Cabinet G, Drawer 6 17 113

0040 Cabinet G, Drawer 7 17 113

0041 Cabinet I, Drawer 1 17 113

0042 Cabinet I, Drawer 2 17 113

0043 Cabinet I, Drawer 3 17 113

0044 Cabinet I, Drawer 4 17 113

0045 Cabinet, I Drawer 5 1 113

0046 Cabinet J, Drawer 1 17 113

0047 Cabinet J, Drawer 2 17 113

0048 Cabinet J, Shelf 1 17 113

0049 Cabinet J, Shelf 2 17 113

0050 DRAWER D1, FOAM ASSY 18 113

0051 DRAWER D5, FOAM ASSY 18 113

3. Deliveries must begin within 90 days of issuance of a delivery order. Firm delivery dates will be expressed on the delivery order(s).

4. Prices shall be submitted on an F.O.B. Destination (52.247-34) basis. Ship to location is Rock Island IL 61299-5000. The price applicable to an individual delivery order is the price for the contract year and quantity range in which the delivery is issued. The delivery date does not determine the ordering period. All delivery orders will be issued unilaterally by the Government. Upon award, Delivery Order 0001 will be placed for at least the guaranteed minimum quantity.

5. Only ACC-RI (CCRI-AH) is authorized to issue delivery orders under this IDIQ contract.

6. Proposed prices must remain valid for 75 days.

7. SECTION L - Instructions, Conditions, and Notices to Offerors

1. Offerors shall provide their proposed firm-fixed unit prices for the range pricing on the Pricing Matrix, Attachment 0001 of the Request for Proposal (RFP), solicitation. The proposed firm-fixed unit prices shall be the prices used by the Government to calculate the Total Evaluated Price (TEP) and for issuance of delivery orders. Offerors must propose firm-fixed unit prices for all CLINs and quantity ranges for all ordering periods identified in the Pricing Matrix. Proposed firm-fixed unit prices must be submitted on an FOB Destination basis, ship to location is Rock Island, IL 61299-5000.

2. The Government intends to evaluate price reasonableness in accordance with FAR Part 15.404-1(b), relying primarily upon competition. The Government expects adequate competition and a comparison will be made of total evaluated prices received in response to the RFP. However, the Government reserves the right to require submission of data other than certified cost or pricing data from the Offeror adequate to determine the reasonableness of a price if competition was inadequate for that purpose.

3. Submission of Data Other than Certified Cost or Pricing Data. The Government anticipates receiving competitive task order quote and using competition to determine price reasonableness. However, the Government reserves the right to request data other than certified cost or pricing data necessary to determine price reasonableness if competition is not adequate for that purpose. Data other than certified cost or pricing data, if required, must be submitted in accordance with the instructions specified at FAR 15.403-5.

4. The Offeror’s proposal will be reviewed utilizing the proposal analysis techniques IAW FAR 15.404-1.

Price analysis shall be used to determine price reasonableness, IAW FAR 15.404-1(b). Additional analysis techniques may be used as determined necessary by the Contracting Officer. Price realism analysis will not be used to evaluate submitted prices. These methods of evaluation may include the use of information / input from sources such as, but not limited to, other Government agencies and personnel.

5. Price analysis is the process of examining and evaluating a proposed price without evaluating its separate cost elements and proposed profit. Unless an exception from the requirement to obtain certified cost or pricing data applies under 15.403-1(b)(1) or (b)(2), at a minimum, the contracting officer shall obtain appropriate data, without certification, on the prices at which the same or similar items have previously been sold and determine if the data is adequate for evaluating the reasonableness of the price. Price analysis may include evaluating data other than certified cost or pricing data obtained from the offeror or contractor when there is no other means for determining a fair and reasonable price. Contracting officers shall obtain data other than certified cost or pricing data from the offeror or contractor for all acquisitions (including commercial item acquisitions), if that is the Contracting Officer’s only means to determine the price to be fair and reasonable.

6. The Price Matrix has been locked to prevent inadvertent changes. Offeror shall not alter the Price Matrix in any way. If an Offeror changes the price matrix, its proposal may be considered unacceptable and may not be further evaluated for award.

7. The firm-fixed unit prices are fully burden prices inclusive of escalation as appropriate. Proposed unit prices are limited to two decimal places. All prices for this acquisition shall be stated in current U.S.

dollars.

8. Commercial items: At a minimum, the contracting officer must use price analysis to determine whether the price is fair and reasonable whenever the contracting officer acquires a commercial item (see 15.404-1(b)).

The fact that a price is included in a catalog does not, in and of itself, make it fair and reasonable. If the contracting officer cannot determine whether an offered price is fair and reasonable, even after obtaining additional data from sources other than the offeror, then the contracting officer shall require the offeror to submit data other than certified cost or pricing data to support further analysis (see 15.404-1). This data may include history of sales to non-governmental and governmental entities, cost data, or any other information the contracting officer requires to determine the price is fair and reasonable. Unless an exception under 15.403-1(b)(1) or (2) applies, the contracting officer shall require that the data submitted by the offeror include, at a minimum, appropriate data on the prices at which the same item or similar items have previously been sold, adequate for determining the reasonableness of the price.

9. Instructions for completion of the Pricing Matrix:

a. All information to be filled in by the offeror is highlighted on the Pricing Matrix in blue.

b. The offeror shall enter its full name, cage code and date in the space provided.

c. Offerors are required to state binding prices. The offeror shall enter firm-fixed unit prices for each CLIN, each quantity range for all ordering periods in the spaces provided. Failure to populate all blue highlighted cells may deem an offeror unacceptable and may not be further evaluated for award.

Section M - Evaluation Factors for Award

1. Price Analysis: The Offeror’s proposal will be reviewed utilizing the proposal analysis techniques IAW FAR 15.404-1. Price analysis shall be used to determine price reasonableness, IAW FAR 15.404-1(b). The Government intends to evaluate price reasonableness in accordance with FAR Part 15.404-1(b), relying primarily upon competition. The Government expects adequate competition and a comparison will be made of total evaluated prices received in response to the RFP. Price analysis shall be used to determine (A) price reasonableness; and (B) whether the proposal reflects an understanding of the effort required. Additional analysis techniques may be used as determined necessary by the Procuring Contracting Officer. These methods of evaluation may include the use of information/input from sources such as (but not limited to) other Government agencies and personnel.

2. Unbalanced Pricing: As part of the evaluation, proposals may be reviewed to identify any significant unbalanced pricing found in the base period and/or between ordering periods, quantity ranges, contract line items or sub-line items as applicable. In accordance with FAR 15.404-1(g), i.e., Unbalanced Pricing, a proposal may be rejected if the Contracting Officer determines the lack of balance poses an unacceptable risk to the Government.

3. The total evaluated price will be derived from the Pricing Matrix.

a. The Government will calculate a Weighted Evaluation Price by multiplying the proposed unit prices for each quantity range and each ordering period by their respective weight and maximum quantity and summing their totals. Then the weighted order period totals are summed to calculate at a Total Evaluated CLIN Price. The weight associated with each quantity range represents the likelihood that an order, if placed, would be placed within that range.

b. The Total Evaluated Price will be determined by summing up all of the Total Evaluated CLIN Price for each Ordering Period.

8. CONTRACTOR PERFORMANCE INFORMATION

The contractor is advised that its performance under this contract will be subject to an assessment(s) in accordance with FAR 42.15 and AFARS 5142.1503-90. The Department of Defense (DoD) Contractors Performance Assessment Reporting System (CPARS) will be used to maintain the performance report(s) generated on this contract. The rating system to be used in this assessment shall be as follows:

Exceptional: Performance meets contractual requirements and exceeds many to the Governments benefit. The contractual performance of the element or sub-element being evaluated was accomplished with few minor problems for which corrective actions taken by the contractor were highly effective.

Very Good: Performance meets contractual requirements and exceeds some to the Governments benefit. The contractual performance of the element or sub-element being evaluated was accomplished with some minor problems for which corrective actions taken by the contractor were effective.

Satisfactory: Performance meets contractual requirements. The contractual performance of the element or sub-element contains some minor problems for which corrective actions taken by the contractor appear or were satisfactory.

Marginal: Performance does not meet some contractual requirements. The contractual performance of the element or sub-element being evaluated reflects a serious problem for which the contractor has not yet identified corrective actions. The contractor's proposed actions appear only marginally effective or were not fully implemented Unsatisfactory: Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance of the element or sub-element contains serious problem(s) for which the contractor's corrective actions appear or were ineffective.

The evaluation procedures to be used in this assessment, which include coordination with the contractor, are detailed in AFARS 5142.1503-90.

9. Army Contracting Command Government Point of Contact (POC) Attachment.

Title Name Phone # Email Contract John Jacobsen 309-782-5149 john.e.jacobsen16.civ@mail.mil Specialist

Procuring Cathy Mendoza 309-782-1258 Cathy.k.mendoza.civ@mail.mil Contracting Officer

Branch Corbin De La Cruz 309-782-7117 corbin.t.delacruz.civ@mail.mil Chief

**NOTE: Communication with the Government should start at the lowest possible level.

8. Rock Island Arsenal (RIA) Visitor Access Passes are issued to individuals, not companies or groups. All visitors, to include transportation and freight services, official and unofficial, are highly suggested to pre-register at least three (3) business days prior to their visit. Pre-registration of visitors allows for the National Crime Information

Center NCIC-III background check to be conducted prior to the individual arriving at RIA, reducing their wait time upon arrival.

It is the responsibility of the prime contractor to ensure that this information is passed along to any subcontractor or transportation provider used during the performance of this purchase order. DRIVERS WHO DO NOT MEET

THE INSTALLATION ACCESS REQUIREMENTS WILL NOT BE ALLOWED ON THE

INSTALLLATION AND WILL BE TURNED AWAY.

NOTE: As of 31 Dec 2015, Department of Defense and Department of the Army has directed that Driver Licenses and ID cards from Minnesota, Missouri and Washington are not compliant with the standards of the REAL ID Act and cannot be used on their own as a primary means of identification to apply for access to Rock Island Arsenal.

Driver’s Licenses that have written on the top of them “NOT FOR FEDERAL IDENTIFICATION PURPOSES” are also non-compliant.

These non-compliant driver’s license or state issued identification cards may still be presented at the Rock Island Visitor Control Center, but they must be accompanied by one of the following secondary forms of identification before a records check is conducted and installation access is granted:

*Current vehicle registration showing name and address *Social Security card *US passport or passport card *US Military or Draft Record (DD-214 or Selective Service Registration Card) *Veteran Health Identification Card issued by the US Department of Veterans Affairs *Transportation Worker Identification Credential *Personal Identification Verification card issued by the Federal Government *Personal Identification Verification 0 Interoperable card issued by the Federal Government *US Certificate of Naturalization or certificate of citizenship (Form N-550)

*US Department of Homeland Security “Trusted Traveler” card (Global Entry, NEXUS, SENTRI, or

FAST)

*Driver’s license issued by the US Department of State *US Military Identification Card for military members, dependents and retirees *US Permanent Resident/Alien Registration Receipt Card (Form 1-551) *US Coast Guard or Department of Homeland Security Merchant Mariner card *Native American Tribal Photo Identification card

Visitor Access Request Forms and a complete list of acceptable identification can be found at https://home.army.mil/ria/ (click on Menu, then Visitor Information, and then under How to Visit Rock Island Arsenal click on the second bullet “How to obtain a visitor pass”. Then on the right side of the screen click on “Access Request Process”) or call 309-782-0551.

Forms may be emailed for faxed

All visitors must process through the Moline Visitor Center Gate (I-74) off of River Drive in Moline, IL.

Visitors (to include transportation and freight providers) will require proper identification to access RIA

POC for this Policy are: RIA Visitor Center, Phone 309-782-0551, FAX 309-782-5029, email:

usarmy.ria.imcom.mbx.usag-access-request@mail.mil

9. RECEIVING HOURS OF OPERATION:

Monday – Friday, 6:30am to 2:00pm CST Deliveries before or after the above stated hours will be turned away. Appointments are not necessary.

For Directions call: 309-782-8539 (Automated)

END OF ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFERORS - COMMERCIAL

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD01

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042074 (THIS ASSEMBLY

CONSISTS OF 1 EACH OF 11B5042001, 11B5042038, 11B5042100,

11B5042039 AND 11B5042040; AND 11B5042103 AS REQUIRED), AND

THE FOLLOWING TOOLS: 2 EA OF 11B5090129, 10EA OF NSN 5110-00-

277-4590, 10 EA OF NSN 5110-00-277-4591, 10 EA OF NSN5110-00-277-

4592, 2 EA OF 11B5090484, 1 EA OF 11B5090455, 1 SET OF 11B5090456

(THIS SET CONTAINS 1 EA OF THE FOLLOWING: 11B5090457,

11B5090458-1, 11B5090458-2, 11B5090460, 11B5090461-1 THROUGH

11B5090461-6, 11B5090467-1 THROUGH 11B5090467-5, 11B5090472-1

THROUGH 1 1B5090472-9,AND 11B5090481-1 THROUGH 11B5090481-3), 1

SET OF 11B5090200, 1 EA OF 11B5090485, AND 1 EA O AND 1 EA OF

11B5090454. PLACE THE TOOLS IN THE FOAM ASSEMBLY PER

DRAWING 11B5040007, SHEET 3. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION. APPLY A LABEL WITH "DRAWER B1" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE.

ENSURE THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE

TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD01:19204

PSC CD: 3470

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD02

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042075 (THIS ASSEMBLY

CONSIST OF 1 EA OF 11B5042001, 11B5042041, 11B5042042, 11B5042043,

11B5042044, 11B5042045, 11B5042046, 11B5042047, AND 11B5042048; AND

11B5042103 AS REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS:

11B5090034-1 THROUGH 11B5090034-5, 11B5090033-1, 11B5090033-2,

11B5090032-1, 11B5090032-2, AND 11B5090031. PLACE THE TOOLS IN

THE FOAM ASSEMBLY PER DRAWING 11B5040007, SHEET 4. SEAL THE

FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION

INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A LABEL WITH

"DRAWER B2" AND ON A SEPARATE LABEL INDICATE THE VCI

ACTIVATION DATE. ENSURE THE LABEL AND VCI DO NOT BLOCK

THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD02:19204

UNIT UNIT PRICE MAX AMOUNT

0003 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD03

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042076 (THIS ASSEMBLY

CONSIST OF 1 EA OF 11B5042001 AND 11B5042049; AND 11B5042103 AS

REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS: 11B5090489-1

THROUGH 11B5090489-32 AND 11B5090490-1 THROUGH 11B5090490-32.

PLACE THE TOOLS IN THE FOAM ASSEMBLY PER DRAWING

11B5040007, SHEET 5. SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC

WITH A VAPOR CORROSION INHIBITOR, 1 YEAR MINIMUM

DURATION. APPLY A LABEL WITH "DRAWER B3" AND ON A

SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD03:19204

UNIT UNIT PRICE MAX AMOUNT

0004 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD04

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042077 AND 1 EA OF THE

FOLLOWING TOOLS: 11B5090554-1 THROUGH 11B5090554-96. PLACE

THE TOOLS IN THE FOAM ASSEMBLY PER DRAWING 11B5040007,

SHEET 6. SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC WITH A

VAPOR CORROSION INHIBITOR, 1 YEAR MINIMUM DURATION.APPLY

A LABEL WITH "DRAWER B4" AND ON A SEPARATE LABEL INDICATE

THE VCI ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT

BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD04:19204

UNIT UNIT PRICE MAX AMOUNT

0005 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD05

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042078 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 111B5042051; AND 11B5042103

AS REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS: 11B5090651-1

THROUGH 11B509065-96. PLACE THE TOOLS IN THE FOAM ASSEMBLY

PER DRAWING 11B5040007, SHEET 7. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION, APPLY A LABEL WITH "DRAWER B5" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD05:19204

UNIT UNIT PRICE MAX AMOUNT

0006 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD06

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042079 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042052; AND 11B5042103 AS

REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS: 11B5091646 (THIS

ASSEMBLY CONTAINS 1 EA OF 11B5090713 AND 11B5090714, AND NIIN

8030-00-889-3535 AS REQUIRED), 11B5091647 (THIS ASSEMBLY

CONTAINS 1 EA OF 11B5090715 AND 11B5090714, AND NIIN 8030-00-889-

3535 AS REQUIRED), 11B5090697-1 THROUGH 11B5090697-8,

11B5090696-1 THROUGH 11B5090696-8, 11B5090684-1 THROUGH 1

1B5090684-6, AND 11B5090683-1 THROUGH 11B5090683-6. PLACE THE

TOOLS IN THE FOAM ASSEMBLY PER DRAWING 11B5040007, SHEET 8.

SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR

CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION.APPLY A LABEL WITH "DRAWER B6" AND ON A

SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD06:19204

UNIT UNIT PRICE MAX AMOUNT

0007 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD07

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042080 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042053; AND 11B5042103 AS

REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS: 11B5090101 (THIS

SET CONTAINS 1 EA OF 11B5090102-1 THROUGH 11B5090102-29

PACKED IN A CASE), 11B5090103 (THIS SET CONTAINS 1 EA OF

11B5090104-1 THROUGH 11B5090104-5 AND 11B5090105-1 THROUGH

11B5090105-5 PACKED IN A CASE), 11B5090201, 11B5090143, AND

11B5090718. PLACE THE TOOLS IN THE FOAM ASSEMBLY PER

DRAWING 11B5040007, SHEET 9. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION. APPLY A LABEL WITH "DRAWER B7" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD07:19204

UNIT UNIT PRICE MAX AMOUNT

0008 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD08

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042081 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001, 11B5042054, AND 11B5042101; AND

11B5042103 AS REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS:

11B5090716 (NOTE THIS TOOL COMES WITH 2 EA OF 11B5090719 AND 1

EA OF 11B5090721 AND 11B5090720) AND 11B5090144 ( NOTE THIS

TOOL COMES WITH 11B5091685). PLACE THE TOOLS IN THE FOAM

ASSEMBLY PER DRAWING 11B5040007, SHEET 10. SEAL THE FOAM

AND TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION

INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A LABEL WITH

"DRAWER B8" AND ON A SEPARATE LABEL INDICATE THE VCI

ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT BLOCK

THE VIEW OF THE TOOLS

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD08:19204

UNIT UNIT PRICE MAX AMOUNT

0009 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD09

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042082 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042055; AND 11B5042103 AS

REQUIRED) AND THE FOLLOWING TOOLS: 1 EA OF 11B5090202 (THIS

SET CONTAINS 1 EA OF 11B5090229, 11B5090230, 11B5090231,

11B5090232, 11B5090233, 11B5090234, 11B5090235, AND 11B5090236

PACKED IN A CASE), 5 EA OF 11B5090725, 10 EA OF 11B5090135,

11B5090134, 11B5090132, AND 11B5090133, 2 EA OF 11B5090131, 1 EA OF

11B5091602 (THIS ASSEMBLY CONSISTS OF 1 EA OF 11B5090128 (THIS

COMES WITH 1 EA OF 11B5091613) AND 11B5090714, AND NSN 8030-00-

889-3535 AS REQUIRED), 2 EA OF 11B5090114, AND 10 EA OF

11B5090112-1 THROUGH 11B5090112-3 AND 11B5090113-1 THROUGH

11B5090113-3.

PLACE THE FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR

CORROSION INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A

LABEL WITH "DRAWER B9" AND ON A SEPARATE LABEL INDICATE

THE VCI ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT

BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD09:19204

UNIT UNIT PRICE MAX AMOUNT

0010 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD10

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042083 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042056; AND 11B5042103 AS

REQUIRED) AND THE FOLLOWING TOOLS: 1 EA OF 11B5090726 (THIS

TOOL COMES WITH 1 EA OF 11B5090728, 11B5090729, 11B5090730,

11B5090731, AND 11B5090727), AND 10 EA OF 11B5090203 AND

11B5091630. PLACE THE TOOLS IN THE FOAM ASSEMBLY PER

DRAWING 11B5040007, SHEET 12. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION. APPLY A LABEL WITH "DRAWER B10" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD10:19204

UNIT UNIT PRICE MAX AMOUNT

0011 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD11

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042084 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001, 11B5042102, 11B5042057, 11B5042058,

11B5042059, AND 11B5042060; AND 11B5042103 AS REQUIRED) AND

THE FOLLOWING TOOLS: 5 EA OF 11B5090126-1 THROUGH 11B5090126-

10 AND 1 EA OF 11B5090141. PLACE THE TOOLS IN THE FOAM

ASSEMBLY PER DRAWING 11B5040007, SHEET 13. SEAL THE FOAM

AND TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION

INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A LABEL WITH

"DRAWER B11" AND ON A SEPARATE LABEL INDICATE THE VCI

ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT BLOCK

THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD11:19204

UNIT UNIT PRICE MAX AMOUNT

0012 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD12

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042085 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042061; AND 11B5042103 AS

REQUIRED) AND 2 EA OF THE FOLLOWING TOOLS: 11B5090003-3 AND

11B5090003-1. PLACE THE TOOLS IN THE FOAM ASSEMBLY PER

DRAWING 11B5040007, SHEET 14. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION. APPLY A LABEL WITH "DRAWER B12" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD12:19204

UNIT UNIT PRICE MAX AMOUNT

0013 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBD13

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042086 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042062; AND 11B5042103 AS

REQUIRED) AND 2 EA OF THE FOLLOWING TOOLS: 11B5090003-4 AND

11B5090003-2. PLACE THE TOOLS IN THE FOAM ASSEMBLY PER

DRAWING 11B5040007, SHEET 15. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION. APPLY A LABEL WITH "DRAWER B13" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBD13:19204

UNIT UNIT PRICE MAX AMOUNT

0014 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLBS01

FFP

PROVIDE THE FOLLOWING TOOLS: 2 EA OF 11B5090174, 11B5090736,

AND 11B5090173; AND 1 EA OF 11B5091625 (THIS KIT CONTAINS

11B5090739-1 THROUGH 11B5090739-30 PACKAGED IN 11B5091548

(THIS CASE CONTAINS 1 EA OF NSN 8145-01-541-0043 AND NSN 6850-

01-133-0373)). MARK ON THE VCI THE DATE OF ACTIVATION. PLACE

ALL THE ITEMS TOGETHER IN A CONTAINER AND LABEL THE

CONTAINER WITH "SHELF B1" AND THE DATE OF ACTIVATION FOR

THE VCI. ENSURE THE LABEL AND VCI DO NOT BLOCK THE VIEW OF

THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLBS01:19204

UNIT UNIT PRICE MAX AMOUNT

0015 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD01

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042087 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042000 AND 11B5042001; AND 11B5042103 AS

REQUIRED) AND THE FOLLOWING TOOLS: 1 EA OF 11B5090298,

11B5090297, 11B5090296, 11B5090291-2, 11B5090291-3, 11B5090290, AND

11B5090291-1; 2 EA OF 11B5090127; AND 4 EA OF 11B5090002. PLACE

THE TOOLS IN THE FOAM ASSEMBLY PER DRAWING 11B5040004,

SHEET 3. SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC WITH A

VAPOR CORROSION INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY

A LABEL WITH "DRAWER C1" AND ON A SEPARATE LABEL INDICATE

THE VCI ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT

BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD01:19204

UNIT UNIT PRICE MAX AMOUNT

0016 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD02

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042088 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042002; AND 11B5042103 AS

REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS: 11B5090195,

11B5090178, 11B5090188, 11B5090190, 11B5090175, 11B5090176, 11B5090177, 11B5090179, 11B5090181, 11B5090180, 11B5090187, 11B5090189, 11B5090186, 11B5090183, 11B5090182, 11B5090185, 11B5090184, 11B5090192, 11B5090193, AND 11B5090194. PLACE THE

TOOLS IN THE FOAM ASSEMBLY PER DRAWING 11B5040004, SHEET 4.

SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR

CORROSION INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A

LABEL WITH "DRAWER C2" AND ON A SEPARATE LABEL INDICATE

THE VCI ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT

BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD02:19204

UNIT UNIT PRICE MAX AMOUNT

0017 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD03

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042089 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042003, 11B5042113, 11B5042004, 11B5042005,

11B5042006 AND 11B5042001; AND 11B5042103 AS REQUIRED)AND 1 EA

OF THE FOLLOWING TOOLS: 11B5090306-1 THROUGH 11B5090306-8,

11B5090146-1 THROUGH 11B5090146-3, 11B5090323-1 THROUGH

11B5090323-3, 11B5090315-1 THROUGH 11B5090315-7, 11B5091550 ( THIS

KIT ASSEMBLY WILL CONTAIN 5 EA OF 11B5090301 AND 11B5090302

PACKED IN 1 EA OF 11B5190515 WITH 1 EA OF THE DECALS

11B5091642-1 AND 11B5091629-1), AND 11B5091551 (THIS KIT

ASSEMBLY CONTAINS 5 EA OF 11B5090303 AND 11B5090304 PACKED

IN 1 EA OF 11B5190515 WITH 1 EA OF DECDECALS 11B5091642-1 AND

11B5091629-2). NOTE: FOR THE DECALS THE MATERIAL IS 11B5091628,

AND 11B5091627 IS TO BE USED AS REQUIRED TO AID ADHESION.

PLACE THE TOOLS IN THE FOAM ASSEMBLY PER DRAWING

11B5040004, SHEET 5. SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC

WITH A VAPOR CORROSION INHIBITOR, 1 YEAR MINIMUM

DURATION. APPLY A LABEL WITH "DRAWER C3" AND ON A

SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD03:19204

UNIT UNIT PRICE MAX AMOUNT

0018 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD04

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042090 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042007 AND 11B5042001; AND 11B5042103 AS

REQUIRED) AND THE FOLLOWING TOOLS: 1 EA OF 11B5090327 (THIS

SET CONSISTS OF 1 EA OF 11B5090345-1 THROUGH 11B5090345-16

PACKED IN A METAL CASE) AND 11B5090172 ( THIS SET CONTSISTS

OF 1 EA OF 11B5090345-17 THROUGH 11B5090345-32 PACKED IN A

METAL CASE); AND 2 EA OF 11B5090362 ( THIS SET CONSISTS 1 EA OF

11B5090363-1 THROUGH 11B5090363-8 PACKED IN A CASE). PLACE THE

TOOLS IN THE FOAM ASSEMBLY PER DRAWING 11B5040004, SHEET 6.

SEAL THE FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR

CORROSION INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A

LABEL WITH "DRAWER C4" AND ON A SEPARATE LABEL INDICATE

THE VCI ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT

BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD04:19204

UNIT UNIT PRICE MAX AMOUNT

0019 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD05

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042091 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001, 11B5042008 THROUGH 11B5042013,

11B5042015,11B5042112,11B5042111; 1 EA OF 11B5091763;

1 EA OF 11B5042124; 1 EA OF 11B5091761, 1 EA OF 11B5091762; AND

11B5042103 AS REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS:

11B5090381, 11B5090207, 11B5090392, 11B5091743, 11B5090217 THROUGH

11B5090220, 11B5091552 (THIS KIT CONSISTS OF 10 EA OF 11B5090388

THROUGH 11B5090391 PACKED IN 1 EA OF 11B5190553 WITH 1 EA OF

DECALS 11B5091642-7 AND 11B5091629-4), 11B5091553 (THIS KIT

CONSISTS OF 10 EA 11B5090383 THROUGH 11B5090386 PACKED IN 1 EA

OF 11B5190553 WITH 1 EA OF DECALS 11B5091642-7 AND 11B5091629-

3), AND 11B5090371 (THIS SET CONSISTS OF 1 EA OF 1 EA OF

11B5090210. 11B5090221 THROUGH 11B5090228, TORX KEY SET (NO

DRAWING), AND TORX KEY T-15 (NO DRAWING). NOTE: FOR THE

DECALS, THE MATERIAL IS 11B5091628, AND 11B5091627 IS TO BE

USED AS REQUIRED TO AID ADHESION. PLACE THE TOOLS IN THE

FOAM ASSEMBLY PER DRAWING 11B504004, SHEET 7. SEAL THE

FOAM AND TOOLS IN CLEAR PLASTIC WITH CORROSION INHIBITOR,

1 YEAR MINIMUM DURATION. APPLY A LABEL WITH "DRAWER C5"

ANSD ON A SEPERATE LABEL INDICATE THE VCI ACTIVATION DATE.

ENSURE THE LABLES AND VCI DO NOT BLOCK THE VIEW OF THE

TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD05:19204

UNIT UNIT PRICE MAX AMOUNT

0020 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD06

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042092 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001 AND 11B5042016; AND 11B5042103 AS

REQUIRED) AND 1 EA OF THE FOLLOWING TOOLS: 11B5090393

THROUGH 11B5090396, 11B5090982, 11B5090981, 11B5095404 (THIS SET

CONSISTS OF 11B5090405 THORUGH 11B0590408), AND 11B5090398

(THIS TOOL COMES WITH 11B5090983,11B5090399 THROUGH

11B5090403, AND 11B5090397). PLACE THE TOOLS IN THE FOAM

ASSEMBLY PER DRAWING 11B5040004, SHEET 8. SEAL THE FOAM AND

TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1

YEAR MINIMUM DURATION. APPLY A LABEL WITH "DRAWER C6"

AND ON A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE.

ENSURE THE LABELS AND VCI DO NOT BLOCK THE

VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD06:19204

UNIT UNIT PRICE MAX AMOUNT

0021 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD07

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042093 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001, 11B5042017, 11B5042109, 11B5042019

THROUGH 11B5042025; 2 EA OF 11B5042018; AND 11B5042103 AS

REQUIRED) AND THE FOLLOWING TOOLS: 2 EA OF 11B5090412 (THIS

ASSEMBLY CONSISTS OF 1 EA OF 11B5090984 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5091560 AND 11B5091561), 11B5090414,

11B5090415, AND "INDICATOR ROD, MAGNETIC DIAL INDICATOR" (NO

DRAWING)); AND 1 EA OF NSN 5210-01-455-2937, NSN 5210-01-455-2936,

NSN 5210-00-222-4000, NSN 5210-00-221-2072, 11B5090294 (THIS SET

CONSISTS OF 2 EA OF THE V-BLOCKS (PER DRAWING 11B5090294)

AND 1 EA OF 11B5090295), 11B5091558, 11B5090416,AND 11B5090409

(THIS TOOL COMES WITH

1 EA OF 11B5090410 AND 11B5090411). PLACE THE TOOLS IN THE

FOAM ASSEMBLY PER DRAWING 11B5040004, SHEET 9. SEAL THE

FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION

INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A LABEL WITH

"DRAWER C7" AND ON A SEPARATE LABEL INDICATE THE VCI

ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT BLOCK

THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD07:19204

UNIT UNIT PRICE MAX AMOUNT

0022 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD08

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042094 (THIS ASSEMBLY

CONSISTS OF 1 EA OF11B5042001, 11B5042026 THROUGH 11B5042028,

11B5042125, 11B5042126 AND 11B5042110; AND11B5042103 AS

REQUIRED) AND THE FOLLOWING TOOLS: 2 EA OF 11B5090444; AND1

EA OF 11B5090433 (THIS SET CONSISTS OF 1 EA OF THE COAXIAL

INDICATOR(PER DRAWING 11B5090433) AND 11B5090436 THROUGH

11B5090438 PACKED IN11B5090434), 11B5090717, 11B5090440,

11B5090421 (THIS SET CONSISTS OF11B5090422 THROUGH 11B5090425

PACKED IN A PLASTIC CASE (NO DRAWING)), 11B5091765 DIAL

CALIPER AND 11B5090426 (THIS SET CONSISTS OF 11B5090427

THROUGH 11B5090432.NOTE: THE PLASTIC CASE IS NOT NEEDED

SINCE THE GAGES ARE ARE PLACEDINDIVIDUALLY IN THE FOAM).

PLACE THE TOOLS IN THE FOAM ASSEMBLY PER DRAWING

11B5040004, SHEET 10. SEAL THE FOAM AND TOOLS IN CLEAR

PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR MINIMUM

DURATION. APPLY A LABEL WITH "DRAWER C8" AND ON A

SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD08:19204

UNIT UNIT PRICE MAX AMOUNT

0023 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD09

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042095 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001, 11B5042031, 11B5042030, AND

11B5042035; AND 11B5042103 AS REQUIRED) AND 1 EA OF THE

FOLLOWING TOOLS: 11B5090445. PLACE THE TOOL IN THE FOAM

ASSEMBLY PER DRAWING 11B5040004, SHEET 11. SEAL THE FOAM

AND TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION

INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A LABEL WITH

"DRAWER C9" AND ON A SEPARATE LABEL INDICATE THE VCI

ACTIVATION DATE. ENSURE THE LABELS AND VCI DO NOT BLOCK

THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD09:19204

UNIT UNIT PRICE MAX AMOUNT

0024 113 Each

FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCD10

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042096 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042001; 2 EA OF 11B5042037 AND

11B5042036; AND 11B5042103 AS REQUIRED) AND 1 EA OF THE

FOLLOWING TOOLS: 11B5090447, 11B5091582 (THIS KIT CONSITS OF 1

EA OF 11B5090167 (THIS KIT CONSISTS OF 3 EA OF 11B5090150-104,

11B5090150-107, AND 11B5090150-109 THROUGH 11B5090150- 115; AND 6

EA OF 11B5090150-105, 11B5090150-106, AND 11B5090150-108; PACKED

IN 1 EA OF 11B5090996) AND DECAL 11B5091641-17), 11B5091581 (THIS

KIT CONTAINS 1 EA OF 11B5090166 (THIS KIT CONTAINS 3 EA OF

11B5090150-92, 11B5090150-95, 11B5090150-96, 11B5090150-99, 11B5090150-100, 11B5090150-102, AND 11B5090150-103; AND

6 EA OF 11B5090150-93, 11B5090150-94, 11B5090150-97, 11B5090150-98,

AND 11B5090150-101; PACKED IN 1 EA OF 11B5090996) AND DECAL

11B5091641-16), 11B5091580 (THIS KIT CONTAINS 1 EA OF

11B5090165 (THIS KIT CONTAINS 6 EA OF 11B5090150-80, 11B5090150-

84, 11B5090150-88, AND 11B5090150-91; AND 3 EA OF 11B5090150-81

THROUGH 11B5090150-83, 11B5090150-85 THROUGH 11B5090150-87,

11B5090150-89, AND 11B5090150-90; PACKED IN 1 EA OF 11B5090996)

AND

DECAL 11B5091641-15), 11B5091565 (THIS KIT CONTAINS 1 EA OF

11B5090164 (THIS KIT CONTAINS 3 EA OF 11B5090150-74, 11B5090150-

75, AND 11B5090150-77 THROUGH 11B5090150-79; AND 6 EA OF

11B5090150-76; PACKED IN 1 EA OF 11B5090171) AND DECAL

11B5091641-14), 11B5091567 (THIS KIT CONTAINS 1 EA OF 11B5090163

(THIS KIT CONTAINS 3 EA OF 11B5090150-68, 11B5090150-

69,11B5090150-71, AND 11B5090150-73; AND 6 EA OF 11B5090150-70 AND

11B5090150-72;

PACKED IN 1 EA OF 11B5090171) AND DECAL 11B5091641-13),

11B5091579 (THIS KIT CONTAINS 1 EA OF 11B5090162 (THIS KIT

CONTAINS 6 EA OF 11B5090150-62; AND 3 EA OF 11B5090150-63

THROUGH 11B5090150-67; PACKED IN 1 EA OF 11B5090171) AND

DECAL 11B5091641-12), 11B5091578 (THIS KIT CONTAINS 1 EA OF

11B5090161 (THIS KIT CONTAINS 3 EA OF 11B5090150-56, 11B5090150-

57, AND 11B5090150-59 THROUGH 11B5090150-61; AND 6 EA OF

11B5090150-58; PACKED IN 1 EA OF 11B5090171) AND DECAL

11B5091641-11), 11B5091563 (THIS KIT CONTAINS 1 EA OF 11B5090169

(THIS KIT CONTAINS 6 EA OF 11B5090150-122, 11B5090150-123,

11B5090150-125, AND 11B5090150-126; AND 3 EA OF

11B5090150-124 AND 11B5090150-127; PACKED IN 1 EA OF 11B5090171)

AND DECAL 11B5091641-19), 11B5091583 (THIS KIT CONTAINS 1 EA OF

11B5090168 (THIS KIT CONTAINS 6 EA OF 11B5090150-116 THROUGH

11B5090150-118 AND 11B5090150-120; AND 3 EA OF 11B5090150-119 AND

11B5090150-121; PACKED IN 1 EA OF 11B5090171) AND DECAL

11B5091641-18), 11B5091577 (THIS KIT CONTAINS 1 EA OF 11B5090160

(THIS KIT CONTAINS 3 EA OF 11B5090150-54 AND 11B5090150-55;

PACKED IN 1 EA OF

11B5090171) AND DECAL 11B5091641-10), 11B5091049 (THIS KIT

CONTAINS 1 EA OF 11B5090159 (THIS KIT CONTAINS 3 EA OF

11B5090150-48, 11B5090150-49, 11B5090150-51, AND 11B5090150-53; AND

6 EA OF

11B5090150-50 AND 11B5090150-52; PACKED IN 1 EA OF 11B5090171)

AND DECAL 11B5091641-9), 11B5091639 (THIS KIT CONTAINS 1 EA OF

11B5090158 (THIS KIT CONTAINS 3 EA OF 11B5090150-42

THROUGH 11B5090150-45; AND 6 EA OF 11B5090150-46 AND

11B5090150-47; PACKED IN 1 EA OF 11B5090171) AND DECAL

11B5091641-8), 11B5091576 (THIS KIT CONTAINS 1 EA OF 11B5090157

(THIS KIT

CONTAINS 3 EA OF 11B5090150-36, 11B5090150-37, AND 11B5090150-39

THROUGH 11B5090150-41; AND 6 EA OF 11B5090150-38; PACKED IN 1

EA OF 11B5090171) AND DECAL 11B5091641-7),11B5091575 (THIS KIT

CONTAINS 1 EA OF 11B5090156 (THIS KIT CONTAINS 3 EA OF

11B5090150-30 THROUGH 11B5090150-34; AND 6 EA OF 11B5090150-

35;PACKED IN 1 EA OF 11B5090171) AND DECAL 11B5091641-6),

11B5091574 (THIS KIT CONTAINS 1 EA OF 11B5090155 (THIS KIT

CONTAINS 6 EA OF 11B5090150-25, 11B5090150-26, AND 11B5090150-28;

AND 3 EA OF 11B5090150-27 AND 11B5090150-29; PACKED IN 1 EA OF

11B5090171) AND DECAL 11B5091641-5), 11B5091573 (THIS KIT

CONTAINS 1 EA OF 11B5090154 (THIS KIT CONTAINS 3 EA OF

11B5090150-19 THROUGH 11B5090150-23; AND 6 EA OF 11B5090150-

24;PACKED IN 1 EA OF 11B5090171) AND DECAL 11B5091641-4),

11B5091572 (THIS KIT CONTAINS 1 EA OF 11B5090153 (THIS KIT

CONTAINS 3 EA OF 11B5090150-13 THROUGH 11B5090150-16, AND

11B5090150-18; AND 6 EA OF 11B5090150-17; PACKED IN 1 EA OF

11B5090171) AND DECAL 11B5091641-3), 11B5091571 (THIS KIT

CONTAINS 1 EA OF 11B5090152 (THIS KIT CONTAINS 3 EA OF

11B5090150-7 THROUGH

11B5090150-12; PACKED IN 1 EA OF 11B5090171) AND DECAL

11B5091641-2), AND 11B5091570 (THIS KIT CONTAINS 1 EA OF

11B5090151 (THIS KIT CONTAINS 3 EA OF 11B5090150-1 AND

11B5090150-3 THROUGH 11B5090150-6; AND 6 EA OF 11B5090150-2;

PACKED IN 1 EA OF 11B5090171) AND DECAL 11B5091641-1). NOTE:

FOR THE DECALS THE MATERIAL IS 11B5091628, AND 11B5091627 IS

TO BE USED AS REQUIRED TO AID ADHESION. PLACE THE TOOLS IN

THE FOAM ASSEMBLY PER

DRAWING 11B5040004, SHEET 12. SEAL THE FOAM AND TOOLS IN

CLEAR PLASTIC WITH A VAPOR CORROSION INHIBITOR, 1 YEAR

MINIMUM DURATION. APPLY A LABEL WITH "DRAWER C10" AND ON

A SEPARATE LABEL INDICATE THE VCI ACTIVATION DATE. ENSURE

THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCD10:19204

UNIT UNIT PRICE MAX AMOUNT

0025 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCS01

FFP

PROVIDE THE FOLLOWING TOOLS: 2 EA OF 11B5090038, 11B5090036,

11B5090014, 11B5090035-2, AND 11B5090035-1; AND 1 EA OF 11B5090812.

PLACE THE TOOLS TOGETHER IN A CONTAINER AND LABEL THE

CONTAINER WITH "SHELF C1".".

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCS01:19204

UNIT UNIT PRICE MAX AMOUNT

0026 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLCS02

FFP

PROVIDE THE FOLLOWING TOOLS: 20 EA OF NSN 4240-01-479-1523, 1

KIT OF 11B5090015, 1 EA OF 11B5090988, 11B5090989, 11B5090990,

11B5090991, 11B5090992, AND 11B5090452; 2 EA OF 11B5090450,

11B5090451, NSN 8415-01-092-0039, AND 11B5090039; 1 PKG OF 6515-01-

386-9624; AND 3 EA OF 11B5090037. PLACE THE TOOLS TOGETHER IN A

CONTAINER AND LABEL THE CONTAINER WITH "SHELF C2".

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLCS02:19204

UNIT UNIT PRICE MAX AMOUNT

0027 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLDD02

FFP

PROVIDE THE FOAM ASSEMBLY 11B5042098 (THIS ASSEMBLY

CONSISTS OF 1 EA OF 11B5042063 AND 11B5042072; AND FOAM

ADEHESIVE 11B5042103 AS REQUIRED) AND THE FOLLOWING: 1 EA

OF 11B5091591 (THIS ASSEMBLY CONTAINS OF 1 EA 11B5090794 (THIS

KIT CONSISTS OF 4 EA OF 11B5090795-1 THROUGH 11B5090795-6 AND

11B5090801; 6 EA OF 11B5090802 AND 11B5090803-1; AND 2 EA OF

11B5090804-1 THROUGH 11B5090804-3 AND 11B5190530-1 THROUGH

11B5190530-3); 1 EA OF DECAL 11B5091643-1; PACKED IN 11B5090793);

11B5091590 (THIS KIT CONSISTS OF 1 EA OF 11B5090778, DECALS

11B5091642-2 AND 11B5091641-20; PACKED IN 1 EA OF 11B5090171);

11B5091587 (THIS KIT CONSISTS OF 6 EA OF 11B5090803-2; 1 EA OF

DECALS 11B5091642-3 AND

11B5091629-5; PACKED IN 1 EA OF 11B5190515); 11B5091588 (THIS KIT

CONSISTS OF 4 EA OF 11B5091026; 3 EA OF NSN'S: 3455-00-250-0768,

3455-00-292-3301, 3455-00-516-3151, 3455-00-474-5774, AND 3455-00-476-

0840; AND 1 EA OF DECALS 11B5091642-4 AND 11B5091641-21;

PACKED IN 11B5090171); AND 11B5091589 (THIS KIT CONSISTS OF 3 EA

OF NSN'S: 3455-00-455-9096, 3455-00-228-5296, 3455-00-250-0789, 3455-00-

228-5217, 3455-00-943-7187, AND 3455-00-228-5297; AND 1 EA OF DECALS

11B5091642-4 AND 11B5091641-22; PACKED IN 1 EA OF 11B5090171).

NOTE: FOR THE DECALS THE MATERIAL IS 11B5091628, AND

11B5091627 IS TO BE USED AS REQUIRED TO AID ADHESION. PLACE

THE TOOLS IN THE FOAM ASSEMBLY PER DRAWING 11B5040010,

SHEET 3. NOTE: LEAVE THE SPACES FOR THE COMPONENTS OF THE

MILL/DRILL PRESS EMPTY. SEAL THE

FOAM AND TOOLS IN CLEAR PLASTIC WITH A VAPOR CORROSION

INHIBITOR, 1 YEAR MINIMUM DURATION. APPLY A LABEL WITH

"DRAWER D2" AND ON A SEPARATE LABEL INDICATE THE VCI

ACTIVATION DATE.

ENSURE THE LABELS AND VCI DO NOT BLOCK THE VIEW OF THE

TOOLS.

Certificate of Conformance - FAR 52.246-15 is required FOB: Destination

NSN: MWMSSTLDD02:19204

UNIT UNIT PRICE MAX AMOUNT

0028 113 Each FSC: 3470 Name: MWMSS TOOL LOA Part Number: MWMSSTLDD04

FFP

PROVIDE…