2-PROJECT DRAWINGS - NOBLE HOUSE - 2026 02 26.pdf

Axonometric - Existing Conditions Scale: 3/32" = 1'-0"

East Prospect Street

South Broad Street

BUILDING CODE DATA:

(reviewed under IBC 2018 & IRC 2018)

BUILDING LOCATION:

201 S. Broad Street Nazareth, PA 18064

Property Owner: ST JOHNS UNITED CHURCH OF CHRIST

SOUTH BROAD & E PROSPECT STS

NAZARETH, PA, 18064

ZONING DISTRICT: Medium Density Residential District - Nazareth Borough

BUILDING HEIGHT :

2 1/2 Stories (Existing - no change)

BUILDING CONSTRUCTION TYPE :

Type VB Wood Frame

OCCUPANCY USE:

Group R-3 Dwelling - Two Family

TENANT AREAS:

Dwelling Unit 100 at First Floor: 860 g.s.f.

Dwelling Unit 200 at Second Floor: 142 g.s.f. + 829 g.s.f. = 971 g.s.f.

Section 420 Fire Partitions per section 708 to be 1 hour rated Horizontal Assemblies per 7112.4.3 to be 1 hour rated (non-sprinklered building)

Occupant Load:

Dwelling Unit 100: 860 g.s.f./200 = 5 occupants Dwelling Unit 200: 971 g.s.f./200 = 5 occupants

MEANS OF EGRESS:

Table 1017.2 - 200' max. exit access travel distance allowed

FIRE SUPRESSION SYSTEM: Not required Building is not sprinklered

INTERIOR FINISH (Table 803.13):

Group R-3: Interior Exit Stairways, Corridors, Exit enclosures & Passageways - Class C Rooms & enclosed spaces - Class C

FIRE EXTINGUISHERS: Not required

MEANS OF EGRESS LIGHTING : (IRC Section 303.7) Interior stairways shall be provided with an artificial light source to illuminate the landings and treads. The light source shall be capable of illuminating treads and landings to levels of not less than 1 foot-candle (11 lux) as measured at the center of treads and landings. There shall be a wall switch at each floor level to control the light source where the stairway has six or more risers.

Project Location Not To Scale

LOCATION OF

PROJECT

1. General Notes:

- Do not scale these drawings; use written dimensions only.

- Notify Architect immediately if assumed existing conditions are other than shown.

- Labor, materials and workmanship shall be in accordance with the industry standards.

2. Insurance:

Each Contractor and subcontractor shall not commence work under the contract until he has provided proof of insurance of such character and in such amounts as will provide adequate protection for the owner, the members thereof, and their successors, all agents officers and servants of the owner, and the contractor and subcontractor against all claims, liabilities, damages and accidents. Such insurance to remain in force throughout the life of the contract.

3. Demolition/Support:

- GC shall safely remove all demolition debris from the site to the appropriate disposal facility.

- GC shall provide temporary support of existing structure to be removed.

- GC shall take precautionary measures to protect existing house during construction.

4. Landscaping:

GC shall protect existing plants and grass during construction. Reseed disturbed grass areas.

5. Temporary Service:

Owner shall be responsible for providing water and electric at the required work area.

6. Guarantees:

All work performed as a part of the contract is to be guaranteed by the contractor and/or subcontractor to be free from defects in material and workmanship for a period of one (1) year from the date of completion of work; the contractor and/or subcontractor agrees to return to the job and make repairs and/or replacement to such defects at no cost to the owner. Final payment shall be made at a substantial completion, less the value of the final punch list. Punch list value will be paid at the completion of work. General Contractor shall turn over to owner all documents, manuals, guarantees, etc for all devices, equipment and appliances.

7. Permits:

Each Contractor/Sub-contractor shall file for necessary building permits. The Owner shall be responsible for the cost of the permits.

PROJECT SUMMARY

The existing single family residence at 201 S. Broad Street is a 2 1/2 story wood frame structure with brick veneer exterior. The first floor area is 1,017 s.f. and the second floor area is 829 s.f. It is desired to convert the structure into (2) individual dwelling units in order to provide affordable housing. The proposed first floor unit will be a two bedroom with a new full bathroom. The proposed second floor unit will be a one bedroom unit and will incorporate the existing first floor hallway and stairs as part of the unit. Existing wall and floor/ ceiling assemblies are to be altered to provide required compartmentation and reduce sound transmission.

1. Applicable Code(s) & Regulations For This Project.

State: Pennsylvania

2018 IBC (International Buidling Code) & 2018 IRC (International Residential Code) PA Uniform Construction Code (Regulations and Statutes)

2. Occupancy Use Classification(s): R-3 Residential

3. Construction Type(s) / Classification(s): 5B

4. Project Description: 2 Story Residential

Area:

Dwelling Unit 100 - 1st Floor - 860 s.f.

Dwelling Unit 200 - 1st Floor - 142 s.f.

2nd Floor - 829 s.f.

5. Fire Protection Systems: Smoke Alarm and CO Alarm

6. Date(s) of Original Construction: N/A

7. Authority Having Jurisdiction: Nazareth Borough, Northhampton County, Pennsylvania

8. Building Owner:

Contact: Rev. Jeffery A. Brinks Pastor of St. John’s United Church of Christ 183 S. Broad Street Nazareth, PA 18064 pastor@sjuccnaz.org. Office: 610.759.0893

INDEX OF DRAWINGS

Architectural A0.1 Building Code Data, Site Plan & Compartmentation D1.1 Basement, First & Second Floor Demolition Plans A1.1 Basement, First & Second Floor Plans, Finish Specifications A2.1 Exterior Elevations A3.1 Enlarged Plans & Interior Elevations A4.1 Door Schedule, Floor/ Ceiling & Partition Types

Mechanical H.1 HVAC Notes H.2 HVAC Plans H.3 HVAC Attic Plan & Details

Electrical E.1 Electrical Notes E.2 Electrical Power Plan E.3 Electrical Lighting Plan E.4 Electrical Details

Plumbing P.1 Plumbing Notes P.2 Sanitary Piping Plans P.3 Potable Water Piping Plans P.4 Natural Gas Piping Plans

Site Plan Scale: 1/8" = 1'-0"

South Broad Street

E as t P ro s p e c t

S tr e e t

NORTH

7' -0

19'-0" typical stall

Provide striping for

(3) new parking spaces

Extend exist. asphalt paving; grade area as required & install new pavement: 1 1/2" macadam wearing course on 2 1/2" binder course on 4" crushed stone on compacted grade

Exist. 2 1/2 story residence to be converted into (2) units

Exist. garage to remain

E x is t.

P av e d A re a ar e a o f ne w p av in g

Exist. stairs to remain

Provide PVC fence enclosure and trash receptacle

Parking Note:

(2) additional parking spaces are being reserved at the opposite side of the church owned lot to create a total of

(5) spaces.

1st Floor

1017 sq ftUnit

860 sq ft

Unit

142 sq ft lav

First Floor Unit Plan Scale: 3/32" = 1'-0"

A A0.1

A A0.1

(Stair/ Hallway only)

Line of 1 hour wall assembly

Unit

829 sq ft

Second Floor Unit Plan Scale: 3/32" = 1'-0"

A A0.1

A A0.1

Compartmentation Building Section Scale: 1/8" = 1'-0"A

F2

F1

Line of 1 hour wall & ceiling assembly

Finish Floor-B -8'-0"

Finish Floor-1 0"

Finish Floor-2 10'-2"

Dwelling Unit 100

Dwelling Unit 200

Exist. attic (mechanical/ storage for Unit 200)

Exist. basement (mechanical/ storage for Unit 200) Sheet No.

Drawn By

Reviewed ByDate

A0.1

GaL

GaL26 April 2024

Sheet Title

P ro je ct

T itl e

Building Code Data, Site Plan &

Compartmentation

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S B ro ad

S tre et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

GaL

Project ID

St John_201 S Broad_Exist

FO

R

P E

R M

IT

JU

LY

, 2

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of

4/4 Architecture, LLC Copyrighted 2024

Proposed Alterations for:

Noble House

201 S Broad Street Nazareth, PA 18064

GaL

1 7/3/24 For Permit

BID SET

02.26.2026

Sheet No.

Drawn By

Reviewed ByDate

D1.1

GaL

GaL26 April 2024

Sheet Title

P ro je ct

T itl e

Basement, First & Second Floor

Demolition Plan

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou

S B ro ad

S tre et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

GaL

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of

4/4 Architecture, LLC Copyrighted 2024

1 7/3/24 For Permit

2nd Floor Plan Scale: 1/4" = 1'-0"NO

RT

H

Remove existing doors & frames, salvage for reuse

Demolish existing bathroom. Remove plumbing fixtures including cabinets and countertop

1st Floor Plan Scale: 1/4" = 1'-0"NO

RT

H

Remove all existing kitchen cabinets, appliances and sink

Provide opening for new door, see door schedule

Enlarge existing openings for new doors, see door schedule

Remove existing door & frame, salvage for reuse

Remove existing door & frame, salvage for reuse

Remove existing door & frame, salvage for reuse

Demolish existing walls and floor tile.

Remove plumbing fixtures

Demolish existing stair to basement

Remove existing carpet from staircase

Remove existing exhaust fan

Remove existing lay-in ceiling above

Remove existing wall paper, patch & prepare for new paint finish

2'-1"

Note:

Existing radiators to be removed throughout building. See Mech.

dwg's for further info.

Basement Plan Scale: 1/4" = 1'-0"NO

RT

H

Demolish existing stairs to first floor

GENERAL DEMOLITION NOTES

THE DEMOLITION DRAWINGS AND NOTES SHALL NOT BE CONSIDERED ALL-INCLUSIVE. THE

CONTRACTOR SHALL BE RESPONSIBLE FOR INSPECTING AND ASSESSING EACH AREA AND

FULFILLING THE INTENT OF THE WORK INDICATED BY THE CONTRACT DOCUMENTS. FIELD

VERIFY ALL CONDITIONS WITHIN THE CONTRACT LIMITS. DEVIATIONS FROM THE

CONTRACT DOCUMENTS NECESSITATED BY THE FIELD CONDITIONS SHALL BE BROUGHT

TO THE ATTENTION OF THE ARCHITECT/ ENGINEER.

GIVE ADVANCE NOTICE TO THE OWNER WHEN WORK IS TO BE PERFORMED THAT COULD

INTERRUPT SERVICES TO OTHER AREAS. THE OWNER'S POLICY AND PROCEDURES IN THIS

REGARD SHALL BE STRICTLY ADHERED TO.

MAINTAIN AND PROTECT EXISTING UTILITIES TO REMAIN IN SERVICE BEFORE

PROCEEDING WITH DEMOLITION, PROVIDING BYPASS CONNECTION TO OTHER PARTS OF

THE BUILDING.

PROVIDE AND MAINTAIN SHORING, BRACING OR STRUCTURAL SUPPORT TO PRESERVE

BUILDING STABILITY AND PREVENT MOVEMENT, SETTLEMENT OR COLLAPSE.

PROTECT BUILDING STRUCTURE OR INTERIOR FROM WEATHER AND WATER LEAKAGE

DAMAGE.

PROTECT REMAINING WALLS, CEILINGS, FLOORS AND EXPOSED FINISHES. ERECT AND

MAINTAIN DUSTPROOF PARTITIONS AS NECESSARY DURING CONSTRUCTION. COVER AND

PROTECT REMAINING EQUIPMENT.

PROMPTLY PATCH AND REPAIR HOLES AND DAMAGED SURFACES OF BUILDING CAUSED BY

DEMOLITION. RESTORE EXPOSED FINISHES OF PATCHED AREAS AND EXTEND FINISH

RESTORATION INTO REMAINING ADJOINING CONSTRUCTION.

PROMPTLY REMOVE DEMOLISHED MATERIALS FROM OWNER'S PROPERTY AND LEGALLY

DISPOSE OF THEM. DO NOT BURN DEMOLISHED MATERIALS. THE ITEMS SHALL BE

DISPOSED OF IN A PROPER MANNER IN ACCORDANCE WITH CITY AND STATE ORDINANCES,

LEAVING SURFACES CLEAN, SOLID AND READY TO RECEIVE NEW MATERIALS/FINISHES.

Reviewed ByDate

A1.1

GaL

GaL26 April 2024

Sheet Title

P ro je ct

T itl e

Basement, First & Second Floor Plan, Finish Specifications

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou

S B ro ad

S tre et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

GaL constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of

4/4 Architecture, LLC Copyrighted 2024

1 7/3/24 For PermitEXISTING WALL PARTITION

SYMBOL KEY

A WALL TYPE DESIGNATION, (SEE A4.1)

WALL PARTITION - DEMOLITION

NEW OR EXISTING DOOR

REMOVE EXISTING DOOR

WINDOW ID

NEW WALL PARTITION

DOOR ID (SEE DOOR SCHEDULE)01

FE FIRE EXTINGUISHER

MkA

Second Floor Plan Scale: 1/4" = 1'-0"NO

RT

H

B

B C

B

B A3.1

D

B Remove existing membrane roof & install new fully adhered EPDM roofing membrane to be Carlisle 'Sure-Seal' or approved equal.

Flash underneath intersection w/ new asphalt shingles.

Provide prefinished metal drip edge.

Remove existing membrane roof & install new fully adhered EPDM roofing membrane to be Carlisle 'Sure-Seal' or approved equal.

Remove existing asphalt shingle roof & install new over new underlayment

Provide new ice & watershield underlayment

General Roofing Note:

Upon removal of existing roofing system, inspect existing decking for any rot or deterioration, make repairs as required.

New Kitchen

Living Rm

Bedroom #1

New Bath

Exist. Stairs/ Hallway

Dining Area

Provide coat pole & shelf at exist. closet

Infill new wall construction to match exist. at former opening. Patch in new base moulding, paint

Fur out exist. wall w/ 2x4 studs filled w/ batt insulation. Apply 1/2" moisture resistant gyp. bd.

SD

CD

SD

SD

First Floor Plan Scale: 1/4" = 1'-0"NO

RT

H

B

B

A A3.1

B

A

Infill existing opening with new floor framing & subfloor to match exist. Prepare to receive new flooring

Clean & stain all trim, balustrade & railings at existing stair to remain

Kitchen

Living Rm

Bedroom #2

Bedroom #1

New Bath

Exist. Stairs/ Hallway

Exist. Vestibule

Existing Porch wardrobe/ armoire, see 10/ A3.1 wardrobe/ armoire, see 9/ A3.1

Exist. closet under stairs to remain

Assumed extent of exist. floor opening to be infilled

New condenser units, see mechanical dwg's

Hatch pattern denotes new carpeting throughout exist.

hallway

Infill new wall construction to match exist. at former door location. Patch in new base moulding, paint

Infill new wall construction to match exist. at former door location. Patch in new base moulding, paint

D

A

Entrance, Unit 100

Entrance, Unit 200

Fur out exist. wall w/ 2x4 studs filled w/ batt insulation. Apply 1/2" moisture resistant gyp. bd.

Exist.

stairs from parking to remain

Hatch pattern denotes LVT plank flooring

SD

CD

SD

SD

CD

Ceiling mounted smoke & carbon monoxide detectors, typ.

Basement Plan Scale: 1/4" = 1'-0"NO

RT

H

Slab on grade

See electrical dwg's for new panel locations

See mechanical dwg's for new equipment locations

Storage/ Mechanical

Storage/ Mechanical

Dashed line denotes extent of rated floor/ ceiling separation above

SD

CD

Keynotes 1.

2.

3.

Provide 1/2" 'Exacor' gypsum underlayment over exist. wood floor throughout, see floor/ ceiling assemblies drawing A4.1. Prepare to receive new finish flooring.

Provide new (non-rated) 1/2" gyb. bd. ceiling on suspension grid or furring where lay-in ceiling has been removed.

Provide & install new 1 hr. rated ceiling, see F2/A4.1 for further info

General Finish Notes 1.

2.

3.

4.

Install new flooring as specified over new underlayment Provide new base molding & casing to match existing at all new wall construction. Paint all moldings & casings as specified.

Patch, repair and paint all existing wall surfaces throughout. Paint as specified New ceiling to be provided at first floor unit where indicated. Paint all existing and new ceilings throughout.

Finish Specifications Item Description Manufacturer/ Product Color

Flooring LVT Roppe/ Premium Vinyl Wood Plank 273 limed pale oak Carpet Mohawk Group, Essential Elements Broadloom TBD

Base Trim & Casing Paint Sherwin Williams, Urethane Trim Enamel Pure White, Satin Finish

Walls Paint Sherwin Williams, Acylic Latex SW 7036, Accessible Beige, Eggshell Walls in Bathrooms " " SW 7036, Accessible Beige, Satin Finish

Ceiling Paint Sherwin Williams, Acylic Latex White, Flat Finish

Casework Factory finish White

Countertops Quartz Wilsonart Quartz Terlingua Q6024

Tile Backsplash Tile Daltile 3x6 MOD0100 WHITE STD

Note:

All finishes to be reviewed and approved by owner & architect prior to ordering. GC to provide actual finish samples and product information.

Reviewed ByDate

A2.1

GaL

GaL26 April 2024

Sheet Title

P ro je ct

T itl e

Exterior Elevations

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou

S B ro ad

S tre et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

GaL constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of

4/4 Architecture, LLC Copyrighted 2024

1 7/3/24 For Permit

West (Front) Elevation Scale: 1/8" = 1'-0"

Patch & repair rotted wood soffit, paint to match existing

Replace exist.

membrane roof over front porch. Provide & install new copper flashing, reget into brick joint

South (Side) Elevation Scale: 1/8" = 1'-0"

New sconce lighting, see electrical dwg's

Srape & paint exist.

sill & frame, typical

Power wash exist.

siding

Repair corner trim

Remove exist.

roofing & install new membrane roof

Remove exist. asphalt shingle roofing & install new asphalt shingle roof

Install new copper flashing, reglet into brick joint above previous installation

East (Rear) Elevation Scale: 1/8" = 1'-0"

Infill former vent opening w/ brick to match exist.

North (Side) Elevation Scale: 1/8" = 1'-0"

Srape & paint exist.

window sashes, sill & frame, typical

Reviewed ByDate

A3.1

GaL

GaL26 April 2024

Sheet Title

P ro je ct

T itl e

Enlarged Plans & Interior Elevations

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou

S B ro ad

S tre et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

GaL constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of

4/4 Architecture, LLC Copyrighted 2024

1 7/3/24 For Permit

Interior Elevation Scale: 3/8" = 1'-0"6

3'-3" 2'-9" 1'-9" 1'-0"

1'-3" 2'-0" d.w.

2'-9" sink

2'-9" corner unit

Wall cabinet w/adjustable shelving

Solid surface/quartz countertop with 4" backsplash

1' -6

Range hood

Ref. by Owner

Corner unit w/Lazy Susan

Unit w/blind corner

Stainless steel sink and faucet, see plumbing dwg's

Interior Elevation Scale: 3/8" = 1'-0"7

5'-0" 6"

Interior Elevation Scale: 3/8" = 1'-0"8

LAV

Prefinished painted wood cabinet

LED light fixtureStandard shower head & control

Shower rod

2'-6" 1'-6" 1'-6" 3'-0"

CL

Solid surface countertop

30"x36" surface mounted trifold mirror medicine cabinet2

Toilet paper dispenser

Standard 60" bathtub w/shower surround, see MEP dwg's for specs

2"

A3.1 lav

A3.1

First Floor Enlarged Plan Scale: 3/8" = 1'-0"A

3 1/2" 6'-10 1/2" 3 1/2"

/2

/2

/2

7/

/2

1'-8 3/4" 5 1/2"

5'-1 1/4" 3 1/2"

/4

1/

Set new wall construction adjacent to existing casing at exist. closet to remain

WORK PT.

Open storage: Provide adjustable shelves on standards

Kitchen

New Bath

Ref.

Interior Elevation Scale: 3/8" = 1'-0"4Interior Elevation

Scale: 3/8" = 1'-0"3

LAV

Prefinished painted wood cabinet

LED light fixture, see electrical dwg's

Standard shower head & control

Shower rod

3'-0" 1'-6" 1'-6" 2'-6"

CL

Solid surface countertop

30"x36" surface mounted trifold mirror medicine cabinet

Toilet paper dispenser

Standard 60" bathtub w/shower surround, see MEP dwg's for specs

2"

Interior Elevation Scale: 3/8" = 1'-0"1

3'-0" 2'-0" d.w.

2'-9" sink

1'-6" 2'-6" stove

1'-6"

3'-5" 5'-10 1/2" exist. window & casing (v.i.f.)

2'-6" 1'-6"

Solid surface/ quartz counter w/ 4" backsplash

Range hood

1' -2

Wall cabinet w/adjustable shelving

Base cabinet w/adjustable shelving

1' -6

New stainless steel sink & faucet, see plumbing dwg's

Ceramic tile backsplash

Interior Elevation Scale: 3/8" = 1'-0"2

Base cabinet w/adjustable shelving

Wall cabinet w/adjustable shelving

1' -2

1'-9" 1'-9" 1'-9" specified countertop with 4" backsplash

Wall tile

3'-6" 1'-9"

Refrig. by owner

CASEWORK BASIS OF DESIGN:

PROVIDE & INSTALL CABINETS & COMPONENTS AS

MANUFACTURED BY SCHROCK or approved equal. CABINET

HANDLES/ PULLS, DOOR STYLE & FINISH SELECTION BY

LANDLORD TO BE BASED ON FACTORY STANDARD

SELECTION.

TOILET ROOM ACCESSORIES:

1) Provide TOILET ROOM ACCESSORIES as shown in the drawings and specified below.

2) FURNISH & INSTALL IN EACH UNIT:

(1) 42" SQUARE TOWEL BAR

(1) 36" square towel bar

(1) HEAVY-DUTY ROBE HOOK,

3) COORDINATE FINAL INSTALLATION LOCATIONS W/ architect

General Interior & Casework Notes:

1. REFER TO MEP DWGS FOR FURTHER INFO.

2. ALL PARTITION DIMENSIONS ARE TO STUD DIMENSIONS. U.N.O.

3. PROVIDE MOISTURE RESISTANT GYPSUM DRYWALL IN ALL

BATHROOM WALLS AND AT OTHER WET WALLS.

4. CONTRACTOR TO VERIFY ALL DIMENSIONS AND PROVIDE FILLERS

for CASERWORK AS NECESSARY, FILLERS ARE NOT TO EXCEED 3".

5. VERIFY ALL BATH/SHOWER STALL DIMENSIONS WITH ACTUAL UNIT

PROVIDED. CONTRACTOR TO COORDINATE FRAMING, TUB

MANUFACTURER AND TUB DETAILS.

7. PROVIDE SUBMITTALS OF FIXTURES AND EQUIPMENT; SAMPLES OF

FINISHES; AND SHOPDRAWINGS OF ALL CASEWORK FOR ARCHITECT'S

REVIEW AND APPROVAL

8. EXTEND ALL FLOOR FINISHES UNDER SHELVING, AND REFRIGERATOR.

9. ALL APPLIANCES TO BE PROVIDED BY OWNER & INSTALLED BY GCArmoire Elevation Scale: 3/8" = 1'-0"10

5'-0" prefinished wood cabinet w/ panel doors, coat pole & shelf double drawer base w/ pulls

4" wood base

Armoire Elevation Scale: 3/8" = 1'-0"9

3'-6"

Interior Elevation Scale: 3/8" = 1'-0"5

Solid surface/quartz countertops with 4" backsplash

1' -2

Range hood

2'-9" corner unit

1'-0" 2'-6" stove

1'-6"

1' -6

1'-0 3/4" 2'-8 3/4" 2'-6" 1'-6"

Wall cabinet w/adjustable shelving

Base cabinet w/adjustable shelving

Corner unit w/Lazy Susan

Ceramic tile backsplashA3.1

A3.1

Second Floor Enlarged Plan Scale: 3/8" = 1'-0"B

5'-0 3/4" 3 1/2"

2 3/4" 5 1/2" 7'-10 1/4"

3'-8 1/2" 3 1/2" 1'-9" 3 1/2" 2'-10 1/2"

5'-0"

/4

/2

New Kitchen

New Bath

Ref.

Provide adjustable shelves at new linen closet

1/

/2

/2

/2

Door Schedule Nominal Size Door Frame

Mark W id th

H ei gh t

Th ic kn es s

D oo r E le va tio n

D oo r M at er ia l

G la z.

S ty le

Fr am e M at er ia l

Ja m b Th ic k

Ja m b D ep th

Fi re

R at in g

H W

S et

01 2'10" 6'8" 1 1/2" A SCWD None WD 1" 5" PRIVACY 02 2'10" 6'8" 1 1/2" A SCWD None WD 1" 4 1/2" PRIVACY 03 2'10" 6'8" 1 1/2" A SCWD None WD 1" 1'3" PRIVACY

04 2'9" 6'8" 1 3/4" Exist. None Exist. 1" 5 7/8" Entrance Exist. to remain, provide new Lockset

05 3'0" 7'0" 1 3/4" Exist. None Exist. 1" 5 7/8" Entrance Exist. to remain, provide new Lockset

21 3'6" 6'8" 1 1/2" B None 1" 5" --------- Bi-fold door 22 1'8" 6'8" 1 1/2" B None 1" 4 1/2" --------- Bi-fold door 23 2'6" 6'8" 1 1/2" A SCWD None WD 1" 4 1/2" PRIVACY

Sheet No.

Drawn By

Reviewed ByDate

A4.1

GaL

GaL26 April 2024

Sheet Title

P ro je ct

T itl e

Door Schedule, Floor/ Ceiling & Partition

Types

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou

S B ro ad

S tre et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

GaL constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of

4/4 Architecture, LLC Copyrighted 2024

1 7/3/24 For Permit

FLOOR/

CEILING

TAG

F-2 1 HR - 53/47 - -

FIRE RESISTANCE

RATING TEST Nº IIC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

F2 - 1 Hr. Floor / Ceiling Assembly

E X

IS

T

/8

Fire Resistance Calculation Notes:

- Fire resistance has been determined per IBC 722 - Calculated Fire Resistance tables.

- Per IBC Sect. 722.6.2 (1) 5/8" type X Gyp. Bd. applied as a membrane adds 40 minutes to the fire rating for both wall & ceiling assemblies.

FLOOR/

CEILING

TAG

F-1 1 HR - - - -

FIRE RESISTANCE

RATING TEST Nº IIC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

F1 - 1 Hr. Floor / Ceiling Assembly

Exist. (assumed) 2x8 floor joists @16" o.c.

Apply RC-1 resiliant channels @ 24" o.c.

Apply 1/2" Exacor underlayment over existing finish floor construction (hardwood floor on wood decking)

Exist. plaster on wood lath

Apply 5/8" type X gyp.

bd.

Exist. 2 x floor joists @16" o.c.

Apply 1/2" Exacor underlayment over existing finish floor construction (hardwood floor on wood decking)

Install 5/8" type X gyp. bd. to underside of exist. joists

3 1/2" sound attenuation blanket

Provide 3 1/2" thick sound attenuation blankets

E x is t.

F lo o r

C o ns tr uc ti o n m in ut e s

Floor/ Ceiling Assemblies Scale: 1 1/2" = 1'-0"

F-2 1 HR - 53/47 - -

INSULAT.

F2 - 1 Hr. Floor / Ceiling Assembly

Apply 1/2" Exacor underlayment over existing finish floor construction (hardwood floor on wood decking) head base plan

Base moulding to match exist.

5/8" Type X gyp bd (green board in damp locations) on either side of 2x4 studs w/ 3 1/2" sound attenuation blanket

New ceiling construction hung from existing, See compartmentation drawing, A0.1 and this sheet for further info.

WALL

TAG

A 1 Hr. UL 305 50 - None

FIRE RESISTANCE

RATING TEST Nº STC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

A - 1 Hr Wall Construction

1/2" resilient channel on corridor side head base plan

Exist

30 min. calc. fire resistance

Exist. base to be removed & reinstalled over new gyp. bd.

New: 1 layer: 5/8" Type X gyp bd on RC channels on 2x4 studs w/ 3 1/2" sound attenuation blanket (40 minute additional fire resistance)

Existing stucco on wood lath wall

New ceiling construction hung from existing, See compartmentation drawing, A0.1 and this sheet for further info.

WALL

TAG

A1 1 Hr. - - - None

FIRE RESISTANCE

RATING TEST Nº STC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

A1 - Existing Wall w/ new 5/8" Gyp. Bd. applied head base plan

Base moulding to match exist.

1/2" gyp bd (green board in damp locations) on interior side of 2x4 studs

New ceiling construction hung from existing, See compartmentation drawing, A0.1 and this sheet for further info.

WALL

TAG

D - - - - None

FIRE RESISTANCE

RATING TEST Nº STC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

D - Non-Rated Partition head base plan

Base moulding as specified

1/2" gyp bd (green board in damp locations) on either side of 2x6 studs w/ sound attenuation blankett, as required for plumbing or to match exist. construction

New ceiling construction hung from existing, See compartmentation drawing, A0.1 and this sheet for further info.

WALL

TAG

C - - - - None

FIRE RESISTANCE

RATING TEST Nº STC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

C - Non-Rated 2x6 Partition head base plan

Base moulding to match exist.

1/2" gyp bd (green board in damp locations) on either side of 2x4 studs

New ceiling construction hung from existing, See compartmentation drawing, A0.1 and this sheet for further info.

WALL

TAG

B - - - - None

FIRE RESISTANCE

RATING TEST Nº STC TEST Nº

INSULAT.

ACOUSTICAL

PERFORMANCE

B - Non-Rated Partition

Wall Assemblies/ Partition Types Scale: 1 1/2" = 1'-0"

GENERAL DOOR & HARDWARE NOTES

1.

2.

3.

Provide door hardware as manufactured by Schlage or approved equal. Finish to match existing Unless noted otherwise, or located on a centerline, locate finish opening 6" from adjacent wall.

Confirm all keying and hardware function requirements with owner.

Door Types s e e s c h e d ul e varies see schedule

Solid core panel bi-fold door, paint

Casing to match exist., paint

Elevation 'B' s e e s c h e d ul e varies see schedule

Solid core panel door to match existing, paint

Casing to match exist., paint

Elevation 'A'

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

HVAC

NOTES

n

Sheet No.

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

HVAC

PLANS

FURNACE SCHEDULE

TAG AREA SERVED MANU MODEL CFM

HEATING POWER

COMMENTS

TYPE CONNECTION INPUT MBH OUTPUT MBH VOLT PHASE AMPS MOP

FURN-1 FIRST FLOOR APARTMENT TRANE S9X1B04D3PSB

A 600 NG 1 5/8 40 38.8 120V 1 8.8 15

FURN-2 SECONDF FLOOR

APARTMENT TRANE S9X1B04D3PSB

A 800 NG 1 5/8 40 38.8 120V 1 8.8 15

DUCTED COOLING COIL SCHEDULE

TAG AREA SERVED MANU MODEL CFM

COOLING POWER

COMMENTS

TYPE NET MBH SENS MBH LAT MBH VOLT PHASE AMPS MOP

CC-1 FIRST FLOOR APARTMENT TRANE 4TXC 600 ELECTRIC 17.80 12.30 5.50 120V 1 1 15

CC-2 SECOND FLOOR APARTMENT TRANE 4TXC 800

CONDENSING UNIT SCHEDULE

TAG AREA SERVED MANU MODEL

COOLING POWER

COMMENTS

TYPE NET MBH SENS MBH LAT MBH VOLT PHASE AMPS MOP

CU-1 FIRST FLOOR APARTMENT TRANE 4TTR4018N1 ELECTRIC 17.80 12.30 5.50 208V 1 14 25 CU-2 SECOND FLOOR APARTMENT TRANE 44TR4024N1 ELECTRIC 22.30 16.90 5.40 208V 1 14 25

EXHAUST FAN SCHEDULE

SYMBOL MANU MODEL TYPE CFM ESP (IN. WC) HP (WATTS) DRIVE BELT / DIRECT WEIGHT (LBS) MAX SONES AMPS VOLTS / PHASE REMARKS

EF-1 BROAN AE110K CEILING 110 0.1 (23.4) DIRECT 10 1 0.3 120 1, 2

EF-2 BROAN AE110K CEILING 110 0.1 (23.4) DIRECT 10 1 0.3 120 1, 2

DUCT INSULATION [PER IECC C403.11.1]

KEY DESCRIPTION R-VALUE REQUIREMENT

1 INSULATION OF UNIT

CASING

FACTORY-INSTALLED INSULATION THAT IS PART OF THE HVAC EQUIPMENT IS

COVERED THROUGH MINIMUM EQUIPMENT EFFICIENCIES IN C403.3.2 [SEE

EXCEPTION 1 IF APPLIES]

NOT REQUIRED

2 EXHAUST ONLY TO PREVENT CONDENSATION IF NECESSARY NOT REQUIRED

3 SUPPLY & RETURN IN

VENTED ATTIC

CRAWL SPACES AND ATTICS VENTED OR OTHERWISE OPEN TO THE

OUTDOORS ARE CONSIDERED UNCONDITIONED SPACES R-6

4 SUPPLY & RETURN IN

EXTERIOR OF BUILDING EXPOSED DUCTWORK ON EXTERIOR OF BUILDING MUST HAVE INSULATION

CLIMATE ZONE 1-4 R-8

CLIMATE ZONE 5 R-12

5 SUPPLY & RETURN IN

SHAFT EXPOSED SHAFT IS CONSIDERED UNCONDITIONED R-6

6 SUPPLY & RETURN IN

UNVENTED ATTIC

DUCTS IN UNVENTED ATTIC COMPLETELY IN BUILDING ENVOLOPE IS

CONSIDERED A CONDITIONED SPACE NOT REQUIRED

SUPPLY IN INDIRECTLY

CONDITIONED CEILING

SPACE

DUCTS IN UNVENTED ATTIC COMPLETELY IN BUILDING ENVOLOPE IS

CONSIDERED A CONDITIONED SPACE NOT REQUIRED

8 EXTERIOR WALL OF

RETURN PLENUM

EXTERIOR WALL OF RETURN PLENUM. IN THIS CASE, THE CEILING SPACE IS

BEING USED AS A RETURN PLENUM. IT IS WITHIN THE BUILDING THERMAL

ENVELOPE. THEREFORE, THE EXTERIOR WALL MUST COMPLY WITH

INSULATION REQUIRMENTS IN IBC

SEE ARCHITECTURALS

9 SUPPLY OUTLET IN

PLENUM WITHIN BUILDING ENVELOPE AND EXTERIOR IS INSULATED NOT REQUIRED

10 SUPPLY RUNOUT IN

RETURN PLENUM

FLEX DUCT NOT REQUIRED TO BE INSULATED. HOWEVER, 1" OF INSULATION

IS NECESSARY FOR SOUND ATTENUATION AND AIR SEALING 1" OF INSULATION MIN.

11 SUPPLY IN RETURN

PLENUM

FOR SUPPLY DUCTS LOCATED WITHIN A RETURN PLENUM ITEMS 9, 10 AND 11

ARE ALL WITHIN AN INDIRECTLY HEATED SPACE. IN THAT REGARD THEY EACH

CAN BE UNINSULATED AS DISCUSSED IN ITEM 7

NOT REQUIRED

12 SUPPLY & RETURN IN

CONDITIONED SPACE

SUPPLY AND RETURN DUCTS OR PLENUMS LOCATED IN CONDITIONED SPACES

THEY SERVE DO NOT REQUIRE INSULATION. [SEE EXCEPTION 2 IF APPLIES]

TYPICAL SPACES N/R

KITCHENS R-6

NATATORIUM R-6

HIGH HUMIDIITY

SPACES R-6

13 SUPPLY & RETURN IN

VENTED CRAWL SPACE SIMILAR TO DUCTS IN VENTED ATTIC (SEE ITEM 3) R-6

14 BURIED SUPPLY LOCATED OUTSIDE OF THE BUILDING ENVELOPE [SEE EXCEPTION 2 IF APPLIES]

CLIMATE ZONE 1-4 R-8

CLIMATE ZONE 5 R-12

EXCEPTION 1:

DUCTS, PLENUMS AND CASINGS THAT ARE FACTORY INSTALLED AND AN INTEGRAL PART OF THE EQUIPMENT RATED IN ACCORDANCE WITH SECTION C403.3.2. AS FOR FACTORY-INSTALLED PIPING INSULATION, THIS EXCEPTION IS INTENDED TO APPLY TO CASINGS AROUND TESTED EQUIPMENT.

ALTHOUGH THEY ARE NOT ALWAYS INCLUDED IN PERFORMANCE TESTING, OPTIONAL CASINGS, SUCH AS ECONOMIZER SECTIONS, ALSO SHOULD BE EXEMPTED FROM INSULATION REQUIRMENTS IF THEY ARE INSULATED TO THE SAME EXTENT AS THE EQUIPMENT TO WHICH THEY ARE ATTACHED.

EXCEPTION 2:

EXHAUST AIR DUCTS AND DUCTS OR PLENUMS LOCATED ANYWHERE THE DESIGN TEMPERATURE DIFFERENCE BETWEEN THE AIR IN THE DUCT AND THE AIR SURROUNDING THE DUCT IS LESS THAN 15F. SIMPLY STATED, THIS INCLUDEDS DUCTS OR PLENUMS LOCATED IN THE CONDITIONED SPACE THEY SERVE - FOR EXAMPLE, EXHAUST DUCTS. THE DESIGNER SHOULD KEEP IN MIND THAT CERTAIN MINIMUM INSULATION LEVELS STILL MAY BE

REQUIRED TO PREVENT CONDENSATION.

Sheet No.

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

HVAC

DETAILS

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

SYMBOLS & LEGEND

SYMBOL DESCRIPTION MOUNTING

DUPLEX GROUNDED RECEPTACLE (NEMA 5-20R) 18" AFF

GROUND FAULT DUPLEX RECEPTACLE (NEMA 5-20R) 18" AFF

SPECIALTY RECEPTACLE (AS NOTED) 18" AFF

DISCONNECT SWITCH, (#AMP, #POLES, # NEMA

RATING) AS NOTED

JUNCTION BOX AS NOTED

SWITCHES (1-POLE) 20A, 120V 46" AFF

SWITCHES (3-WAY) 20A, 120V 46" AFF

SWITCHES (DIMMER) 20A, 120V 46" AFF

SWITCHES (OCCUPANT SENSOR) 20A, 120V 46" AFF

OCCUPANT SENSOR CEILING

EXHAUST FAN AS NOTED

COUNTER-TOP MOUNTED DEVICE 44" AFF

EXISTING DEVICE

WEATHERPROOF COVER WITH WEATHER RESISTANT

RECEPTACLE

UNDER COUNTER

HOME RUN (PHASE, PHASE, NEUTRAL, GROUND, #12

AWG U.N.O.) CEIL./WALL

BRANCH CIRCUIT PANEL & PANEL DESIG. 72" TO TOP

DUPLEX RECEPTACLE (NEMA 5-20R) W/ GFCI BREAKER 18" AFF

CEILING RECESSED DUPLEX RECEPTACLE ~44" AFF

GROUND FAULT DUPLEX RECEPTACLE (NEMA 5-20R) MICROWAVE

HEIGHT

Electrical Notes n

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Electrical Power Plan

FIRST FLOOR APARTMENT 'P.1'

MOUNTING VOLTAGE PHASE WIRE PANEL AIC RATING BUS CAPACITY (A) MAIN BREAKER (A) NO. OF CIRCUITS LOCATION

SURFACE 240 / 120 1 3 MATCH EX. 100 70 24 BASE

CKT # DESCRIPTION LOAD

TYPE

LOAD

AMPS

LOAD

VA

CONDUCTORS GND

SIZE

COND

SIZE

BKR

A/P

PHASE BKR

A/P

COND

SIZE

GND

SIZE

CONDUCTORS LOAD

VA

LOAD

AMPS

LOAD

TYPE DESCRIPTION CKT #

QTY SIZE A B SIZE QTY

CONDENSING UNIT C-1

AC 14.4 1728

2 #10 #10 3/4" 25/2

2784 15/1 GFCI MC #12 #12 2 1056 8.8 AC FURN-1 2

3 AC 14.4 1728 1848 15/1 GFCI MC #12 #12 2 120 1 AC CC-1 4

5 WATER HEATER WH 2 240 2 #12 #12 MC 20/1 GFCI

AFCI 840 20/1 AFCI MC #12 #12 2 600 5 L LIGHTING AND FAN 6

7 KITCHEN - MICROWAVE K 5 600 2 #12 #12 MC 20/1 GFCI

AFCI 960 20/1 AFCI MC #12 #12 2 360 3 R KITCHEN COUNTER RECEPS 8

9 KTICHEN - FRIDGE K 5 600 2 #12 #12 MC 20/1 GFCI

AFCI 960 20/1 AFCI MC #12 #12 2 360 3 R KITCHEN COUNTER RECEPS 10

11 DINING RECEPS R 7.5 900 2 #12 #12 MC 20/1 AFCI 1080 20/1 MC #12 #12 2 180 1.5 R BATHROOM RECP 12

13 BEDROOM RECEPS R 9 1080 2 #12 #12 MC 20/1 AFCI 1200 20/1 GFCI

AFCI MC #12 #12 2 120 1 K GAS STOVE 14

15 LIVING ROOM RECEPS R 10.5 1260 2 #12 #12 MC 20/1 AFCI 1620 20/1 GFCI

AFCI MC #12 #12 2 360 3 K DISHWASHER 16

17 BEDROOM RECEPS R 9 1080 2 #12 #12 MC 20/1 AFCI 1080 18

19 0 20 21 0 22 23 0 24

TOTAL CONNECTED LOAD (VA) A,B

TOTAL CONNECTED LOAD (AMPS) A,B

6864 5508 KVA WITH DIVERSITY APPLIED

AMPS WITH DIVERSITY APPLIED

12.4 KVA

57.2 45.9 51.55 AMPS

L = LIGHTING

R= RECEPTACLE

AC = AIR CONDITIONING

EH = ELECTRIC HEAT

M = MOTOR

K= KITCHEN

WH = WATER HEATER

N = NON LINEAR

SL = SITE LIGHTING

NL = NO LOAD

FIRST FLOOR APARTMENT 'P.2'

MOUNTING VOLTAGE PHASE WIRE PANEL AIC RATING BUS CAPACITY (A) MAIN BREAKER (A) NO. OF CIRCUITS LOCATION

RECESSED 240 / 120 1 3 MATCH EX. 100 70 24 2ND FLR

CKT # DESCRIPTION LOAD

TYPE

LOAD

AMPS

LOAD

VA

CONDUCTORS GND

SIZE

COND

SIZE

BKR

A/P

PHASE BKR

A/P

COND

SIZE

GND

SIZE

CONDUCTORS LOAD

VA

LOAD

AMPS

LOAD

TYPE DESCRIPTION CKT #

QTY SIZE A B SIZE QTY

CONDENSING UNIT C-1

AC 14.4 1728

2 #10 #10 3/4" 25/2

2784 15/1 GFCI MC #12 #12 2 1056 8.8 AC FURN-1 2

3 AC 14.4 1728 1848 15/1 GFCI MC #12 #12 2 120 1 AC CC-1 4

5 WATER HEATER WH 2 240 2 #12 #12 MC 20/1 GFCI

AFCI 840 20/1 AFCI MC #12 #12 2 600 5 L LIGHTING AND FAN 6

7 KITCHEN - MICROWAVE K 5 600 2 #12 #12 MC 20/1 GFCI

AFCI 960 20/1 AFCI MC #12 #12 2 360 3 R KITCHEN COUNTER RECEPS 8

9 KTICHEN - FRIDGE K 5 600 2 #12 #12 MC 20/1 GFCI

AFCI 960 20/1 AFCI MC #12 #12 2 360 3 R KITCHEN COUNTER RECEPS 10

11 DINING RECEPS R 10.5 1260 2 #12 #12 MC 20/1 AFCI 1440 20/1 MC #12 #12 2 180 1.5 R BATHROOM RECP 12

13 BEDROOM RECEPS R 12 1440 2 #12 #12 MC 20/1 AFCI 1560 20/1 GFCI

AFCI MC #12 #12 2 120 1 K GAS STOVE 14

15 LIVING ROOM RECEPS R 13.5 1620 2 #12 #12 MC 20/1 AFCI 1980 20/1 GFCI

AFCI MC #12 #12 2 360 3 K DISHWASHER 16

17 ENTRANCE RECEPS R 7.5 900 2 #12 #12 MC 20/1 AFCI 900 18

19 0 20 21 0 22 23 0 24

TOTAL CONNECTED LOAD (VA) A,B

TOTAL CONNECTED LOAD (AMPS) A,B

7044 6228 KVA WITH DIVERSITY APPLIED

AMPS WITH DIVERSITY APPLIED

13.3 KVA

58.7 51.9 55.30 AMPS

L = LIGHTING

R= RECEPTACLE

AC = AIR CONDITIONING

EH = ELECTRIC HEAT

M = MOTOR

K= KITCHEN

WH = WATER HEATER

N = NON LINEAR

SL = SITE LIGHTING

NL = NO LOAD

HOUSE PANEL 'P.H'

MOUNTING VOLTAGE PHASE WIRE PANEL AIC RATING BUS CAPACITY (A) MAIN BREAKER (A) NO. OF CIRCUITS LOCATION

SURFACE 240 / 120 1 3 MATCH EX. 100 60 24 BASE

CKT # DESCRIPTION LOAD

TYPE

LOAD

AMPS

LOAD

VA

CONDUCTORS GND

SIZE

COND

SIZE

BKR

A/P

PHASE BKR

A/P

COND

SIZE

GND

SIZE

CONDUCTORS LOAD

VA

LOAD

AMPS

LOAD

TYPE DESCRIPTION CKT #

QTY SIZE A B SIZE QTY

1 EXISTING BASEMENT LIGHTS L 5 600 2 #12 #12 MC 20/1 AFCI 600 2

3 EXISTING BASEMENT RECEPTACLES R 5 600 2 #12 #12 MC 20/1 AFCI 600 4

5 GARAGE MISC POWER R 5 600 2 #12 #12 MC 20/1 AFCI 600 6

7 EXTERIOR MISC RECEP R 5 600 2 #12 #12 MC 20/1 AFCI 600 8

BASEMENT 2KW HEATER

EH 8.3 996

2 #12 #12 MC 20/2

996 10

11 EH 8.3 996 996 12

13 0 14 15 0 16 17 0 18 19 0 20 21 0 22 23 0 24

TOTAL CONNECTED LOAD (VA) A,B

TOTAL CONNECTED LOAD (AMPS) A,B

2196 2196 KVA WITH DIVERSITY APPLIED

AMPS WITH DIVERSITY APPLIED

4.4 KVA

18.3 18.3 18.30 AMPS

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Electrical Lighting Plan

BONDING AND GROUNDING

ELECTRODE SIZES - 200A

DESCRIPTION

MAIN BONDING JUMPER

SUPPLY-SIDE BONDING JUMPER

SIZE

#4

TYPE

AWG Cu

#4

CODE

NEC 250.102(C)(1)

AWG Cu NEC 250.102(C)(1)

BONDING JUMPER'S #4 AWG Cu NEC 250.66

*SIZED OFF LARGEST UNGROUNDED CONDUCTOR

*REFER TO NEC FOR ALL EXCEPTIONS AND SPECIFICATIONS

** TBD BASE OFF SUPPLY CONDUCTORS PROVIDED BY PPL

Sheet No.

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Electrical Details

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Plumbing Notes

SYMBOLS & LEGEND

SYMBOL DESCRIPTION

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Sanitary Piping Plans

PLUMBING PIPE INSULATION SCHEDULE

SYSTEM / SERVICE

⁰

INSULATION THICKNESS (IN)

MINERAL-FIBER INSULATION FLEXIBLE ELASTOMERIC INSULATION

NORMINAL PIPE SIZE (IN) NOMINAL PIPE SIZE (IN)

LESS THAN 1" 1" TO 1 1/4" 1 1/2" TO 4" 4" TO 8" 8" OR LARGER LESS THAN 1" 1" TO 1 1/4" 1 1/2" TO 4" 4" TO 8" 8" OR LARGER

POTABLE COLD WATER 40°F - 60°F 1/2 1/2 1 1 1 1/2 1/2 1 1 1

POTABLE HOT WATER,

HOT WATER RETURN 105°F - 140°F 1 1 1 1/2 1 1/2 1 1/2 3/4 3/4 1 1 1

STORM WATER

LEADERS

(HORIZONTAL PIPE

ONLY)

N/A 1 1 1 1 1 1 1 1 1 1

POTABLE WATER, SANITARY & VENT SUPPORT SPACING

MATERIAL

NOMINAL PIPE SIZE

3/8 1/2 3/4 1 1 1/2 2 2 1/2 3 & LARGER

COPPER OR COPPER

ALLOY TUBING 5 FT 5 FT 5 FT 6 FT 8 FT 8 FT 9 FT 10 FT

COPPER OR COPPER

ALLOY PIPE 12 FT 12 FT 12 FT 12 FT 12 FT 12 FT 12 FT 12 FT

SCH. 40 STEEL PIPE 7 FT 7 FT 7 FT 7 FT 9 FT 10 FT 11 FT 12 FT

PVC DWV 4 FT 4 FT 4 FT 4 FT 4 FT 4 FT 4 FT 4 FT

NOTE:

SPACINGS LISTED ARE MAXIMUM ALLOWABLE IN THE HORIZONTAL POSITION.

MAXIMUM ALLOWABLE SPACINGS IN THE VERTICAL POSITION SHALL BE AS FOLLOWS:

• COPPER OR COPPER ALLOY TUBING OR PIPE - 10 FT

• STEEL PIPE - 15 FT

• PVC PIPE - 10 FT; MIDSTORY GUIDES FOR SIZES 2" AND SMALLER ARE REQUIRED

PLUMBING FIXTURE SCHEDULE

SYMBOL DESCRIPTION

FIXTURE FITTING PIPE SIZES (INCHES) RIM HEIGHT

(INCHES) REMARKS

MANUFACTURER MODEL MANUFACTURER MODEL CW HW W V

WC1 TOILET AMERICAN

STANDARD 3517D101.020 AMERICAN

STANDARD 4188A004.020 3/4" --- 4" 2" FINAL SELECTION TO BE CONFIRMED BY OWNER.

L1 LAVATORY HOROW CBS-S03 KINGSTON KB1972AX 1/2" 1/2" 1 1/2" 1 1/2" FINAL SELECTION TO BE CONFIRMED BY OWNER. 2"

MIN BELOW GRADE FOR WASTE AND VENTS.

B1 BATH AMERICAN

STANDARD 2390202.02 KINGSTON KB23.PL 1/2" 1/2" 2" 1 1/2" FINAL SELECTION TO BE CONFIRMED BY OWNER. 2"

MIN BELOW GRADE FOR WASTE AND VENTS

KS1 KITCHEN SINK KOHLER K-4H28176-1-NA AMERICAN

STANDARD 7418300-075 1/2" 1/2" 2" 1 1/2" FINAL SELECTION TO BE CONFIRMED BY OWNER.

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Potable Water Piping Plans

Drawn By

Reviewed ByDate

26 April 2024

Sheet Title

Pr oj ec t T itl e

Pr op os ed

A lte ra tio ns fo r:

N ob le

H ou se

Architect

S Br oa d

St re et N az ar et h, P A

NO. DATE ISSUE NOTE

REV. DATE DESCRIPTION

Project Manager

Project ID

St John_201 S Broad_Exist

All drawings and written materials appearing herein constitute original and unpublished work of the architect and may not be used or disclosed without prior consent of 4/4 Architecture, LLC

Copyrighted 2024

A 6/1/24 FOR REVIEW & COMMENT

B 1/26/26 FOR PRICING

Natural Gas Piping Plans