2-FRAME_RAIL.pdf
PDF 395 KB Posted
- Attached to
- Competitive Selection OH|DOT023A26-4
- Contract number
- DOT023A26-4
- Issued by
- Ohio
About this file
This document is a Sales Engineering Department (SED) Product Information document from Mack Trucks, Inc., dated October 2, 2015, providing detailed technical specifications for the GU713 Truck and Tractor models. The document outlines minimum frame section requirements for various truck configurations, focusing on specifications determined by wheelbase, front axle rating, and rear axle rating for different platform loading scenarios including dump trucks, roll-off platform trucks, and tractors.
The specification charts provide comprehensive technical details for frame rail systems, including minimum mm thickness, frame section dimensions, and compatibility matrices for different wheel bases (ranging from 149-262 inches), front axle ratings (12K, 14.6K, 18K, 20K, and 23K), and rear axle ratings (from 23K to 69K). The document emphasizes that chassis can be ordered with frame rail systems heavier than the published minimum, but cannot be lighter without an approved Option Request. Additionally, there are specific restrictions on frame configurations, such as 8mm and 9.5mm frames not being allowed with front axle ratings over 20K or 23K due to frame stress considerations.
View the file
Other files
Show all 32
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The information in this document was accurate as of the date of release and pertains to the current version of Mack’s Sales Tool. Mack Trucks, Inc.
reserves the right to make changes in specifications, equipment or design, or to discontinue models or options without notice.
PID Code/Condition: 274_GU703
Description: GU713 Frame Requirements
Models: GU713 Truck and Tractor
Date: October 2, 2015
Frame Key:
The following charts are the minimum frame requirements determined by wheel base, after frame, front axle rating, and rear axle rating. A chassis can always be ordered with a frame rail system that is heavier than the published minimum. A chassis cannot be ordered with a frame system that is lighter than the published minimum, unless an approved Option Request exists.
8mm and 8mm with a partial liner are not allowed with >20K front axle due to frame stresses.
8mm, 8mm with a partial liner, 9.5mm, and 9.5mm with a partial liner are not allowed with >23K front axle due to frame stresses.
The information in this document was accurate as of the date of release and pertains to the current version of Mack’s Sales Tool. Mack Trucks, Inc.
reserves the right to make changes in specifications, equipment or design, or to discontinue models or options without notice.
GU713 TRUCK MINIMUM REQUIREMENTS:
The information in this document was accurate as of the date of release and pertains to the current version of Mack’s Sales Tool. Mack Trucks, Inc.
reserves the right to make changes in specifications, equipment or design, or to discontinue models or options without notice.
The information in this document was accurate as of the date of release and pertains to the current version of Mack’s Sales Tool. Mack Trucks, Inc.
reserves the right to make changes in specifications, equipment or design, or to discontinue models or options without notice.
The information in this document was accurate as of the date of release and pertains to the current version of Mack’s Sales Tool. Mack Trucks, Inc.
reserves the right to make changes in specifications, equipment or design, or to discontinue models or options without notice.
GU713 TRACTOR MINIMUM REQUIREMENTS:
File details come from the government source that posted it. Updated .