2-Cummins_engine_warranty_60-100.pdf

Cummins Protection Plan 1 For 2021 and 2024 Products Coverage This Extended Coverage Plan (Plan) is available to be purchased for all eligible Cummins Engines used in automotive applications marketed for use in the United States* and Canada under the trademark "Cummins" or "Cummins ReCon®". This Plan covers failures of the following Engine components which result, under normal use and service, from defects in Cummins material or factory workmanship (Covered Failure):

Covered Component Covered Component Air Compressor Assembly Exhaust Pressure Sensor

Ambient Air Pressure Sensor Flywheel

Brake Assembly Front Gear Cover Assembly

Camshaft Assembly Fuel Injectors

Camshaft Positions Sensor Fuel Rail Pressure Sensors

Camshaft Valve Fuel Pump

Connecting Rod Assembly Fuel Temperature Sensor

Connectivity Module Intake Manifold

Coolant Temperature Sensor Intake Manifold Pressure Sensor

Crankcase Breather Sensor Intake Manifold Pressure/Temperature Sensor

Crankshaft Assembly Intake Manifold Temperature Sensor

Cylinder Block Assembly Liner Group

Cylinder Head Assembly Oil Cooler Assembly

ECM Calibration Oil Pan

EGR Cooler Oil Pressure/Temperature Sensor

EGR Differential Pressure Sensor Oil Pump Assembly

EGR Mixer Piston Group

EGR Temperature Sensor Piston Ring Group

EGR Tube Bellows Gasket or Tube Seal Rocker Assembly

EGR Valve Assembly Throttle Plate Actuator

Electronic Control Module Turbo Assembly

Engine Harness Turbocharger Speed Sensor

Engine Position Sensor Water Pump

This Plan begins at the expiration of the Base Engine Warranty period applicable to the Engine. Coverage ends at the time, miles (kilometers) or hours specified on the accompanying Certificate, whichever occurs first, AS MEASURED FROM THE CUMMINS BASE ENGINE WARRANTY START DATE.

Cummins Responsibilities Cummins will pay for all parts and labor needed to repair the damage to the Engine resulting from a Covered Failure.

Cummins will pay for the lubricating oil, antifreeze, diesel exhaust fluid, filter elements and other maintenance items that are not reusable due to a Covered Failure.

Cummins will pay reasonable labor costs for Engine removal and reinstallation when necessary to repair a Covered Failure.

Owner Responsibilities

Owner is responsible for the operation and maintenance of the Engine as specified in the applicable Cummins Operation and Maintenance Manual. Owner is also responsible for providing proof that all recommended maintenance has been performed.

Before the expiration of this Plan, Owner must notify a Cummins distributor, authorized dealer or other repair location approved by Cummins of any Covered Failure and make the Engine available for repair by such facility. Owner is also responsible for delivering the Engine to the repair facility.

Service locations are listed on the Cummins Worldwide Service Locator at cummins.com.

Owner is responsible for all towing and/or travel expenses incurred as a result of a Covered Failure.

Owner is responsible for the cost of lubrication oil, antifreeze, filter elements, belts, hoses and other maintenance items provided during covered repairs unless such items are not reusable due to the Covered Failure.

Owner is responsible for the communicating expenses, meals, lodging and similar costs incurred as a result of a Covered Failure.

Owner is responsible for non-Engine repairs, "downtime" expenses, cargo damage, fines, all applicable taxes, all business costs and other losses resulting from a Covered Failure.

Owner is responsible for the cost to investigate complaints unless the failure is caused by a defect in Cummins material or factory workmanship.

Limitations Engines with an emissions certification listed below must be operated using only diesel fuel having no more than the corresponding maximum sulfur content. Failure to use the specified fuel as listed in the Cummins Fuel Bulletin #3379001 Table 1 (Cummins Inc. Required Diesel Fuel Specifications) can damage the Engine and aftertreatment system within a short period of time. This damage could cause the Engine to become inoperable and failures attributable to the use of incorrect fuels will be denied Warranty Coverage. Fuel specifications also need to comply with local fuel regulations (EN590 for Europe and ASTM D975 for North America) for Warranty eligibility.

Maximum sulfur levels by emissions certification level as listed on the Engine's dataplate are:

EPA 2007/2010/2013/2017/2021/2024 max. 15 parts per million

EPA Tier 4 Interim / Final / Stage V in North America max. 15 parts per million

EU Stage IIIB 2011 max. 15 parts per million

EU Stage IV 2011 max. 15 parts per million

EU Stage V max. 10 parts per million

Euro 4/5 max. 50 parts per million

Euro 6 max. 10 parts per million

Cummins is not responsible for failures or damage resulting from what Cummins determines to be abuse or neglect, including, but not limited to: operation without adequate coolants or lubricants; overfueling;

overspeeding; lack of maintenance of lubricating, cooling or intake systems; improper storage, starting, warm-up, run-in or shutdown practices; unauthorized modifications of the Engine. Cummins is also not responsible for failures caused by incorrect oil or fuel or by water, diesel exhaust fluid, dirt or other contaminants in the fuel, oil or diesel exhaust fluid.

This Plan does not apply to accessories supplied by Cummins which bear the name of another company.

Such non-Warranted accessories include, but are not limited to: alternators, starters, fans, air conditioning compressors, clutches, filters, transmissions, torque converters, steering pumps, non-Cummins fan drives, Engine compression brakes and exhaust brakes.

Cummins branded alternators and starters are not covered by this Plan.

Aftertreatment component failures are not covered by this Plan.

Low Fuel Pressure Regulator covered component applies to the ISL G and ISX12 G Engines only.

Parts used to repair a Covered Failure may be new Cummins parts, Cummins approved rebuilt parts or repaired parts. Cummins is not responsible for failures resulting from the use of parts not approved by Cummins.

A new Cummins or Cummins approved rebuilt part used to repair a Covered Failure under this Plan assumes the identity of the part it replaced and is entitled to the remaining Coverage hereunder. This Plan is transferable to subsequent Owners of the Engine by notifying a Cummins Distributor within 90 days of the transfer of ownership.

This Plan does not duplicate other Coverages applicable to the Engine.

Fees paid for this Plan are not refundable.

Coverage purchase must be documented on a Cummins Assurance Plan Certificate. The Certificate must be signed and dated by the customer.

CUMMINS DOES NOT COVER WEAR OR WEAROUT OF COVERED PARTS.

CUMMINS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

EXCEPT FOR THE PUBLISHED CUMMINS WARRANTIES, THERE ARE NO OTHER WARRANTIES,

EXPRESS OR IMPLIED, OR OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

* United States includes American Samoa, the Commonwealth of Northern Mariana Islands, Guam, Puerto Rico and the U.S. Virgin Islands.

Coverage I.D.: PD1

Cummins Inc.

Box 3005 Columbus, IN 47202-3005 U.S.A. Bulletin No. 5600686 Printed in U.S.A. Rev 8/23 ©2020 Cummins Inc.