2-2-DA27000-24204520 Specifications.docx

This is a specification document for vertical egg tray incubators prepared by Sunrise Engineering, LLC for the Loa Fish Hatchery Project under the Utah Division of Wildlife Resources. The project requires the supplier to provide 18 twelve-tray vertical incubators, with the basis of design being the Marisource 12-tray vertical incubator model CPM5613, including associated isolation panels, top panel, and drip tray. Each assembled incubator weighs approximately 200 pounds. The supplier must submit the submittal package to the owner within six weeks of notice to proceed, and equipment must be shipped to the hatchery no later than January 15, 2027. The drip tray must be installed to discharge directly into trench drains on the front side of the incubator with proper slope toward discharge. The owner's contractor will be responsible for assembly and installation according to manufacturer recommendations and construction documents.

The State of Utah Division of Facilities Construction and Management (DFCM) is soliciting bids through an invitational process limited to four qualified suppliers: Integrated Aqua Systems, Inc., MariSource (Legends Brands, Inc.), Oceans Design/Gemini Fiberglass, and Pentair/PR Aqua. The construction cost estimate for this project is $100,000.00. The specification references applicable drawing sheets and sections for hatchery planning and equipment specifications to guide supplier and contractor performance in delivering and installing the required incubator equipment.