Attachment___2_Bill_of_Quantities.pdf

LTD

A/e Services to remodel the MSGQ -

Jerusalem

Contract No.191S4019C0003

Unpriced

Bills of Quantities

April, 25, 2019

Warning :This document is the property of the U.S. Government.

Further reproduction and for distribution is prohibited without the express written permission of :American Embassy.18 AGRON Road –

Jerusalem. Information on this document is not to be altered except with the written approval of this individual whose seal appears hereon.

COR :Mr. Kevin Sessink – Facility Manager

Section Works Totals/ $ (w/o

VAT)

1 Demolishing works

2 Concrete works

3 Plaster works

4 Tiles and stone works

5 Gypsum works

6 Wood works

7 Steel works

8 Glass works

9 Painting works

10 Additional works

11 Electrical works

12 Mechanical works

Summary

GRAND TOTAL INCLUDING VAT

Renovation of the MSG House

Talpiot- Jerusalem

General Services Office-Procurement

TOTAL (w/o VAT)

17% VAT

No. Description Unit Qty

Unit Rate

$ (w/o

VAT)

Total $ (w/o

VAT)

The contractor, shall when pricing the rates of this bill take into consideration all cost occur upon him and allow for the cost and expenses of all requirements stipulated in the special specifications, drawings and general specifications of the contract, according to engineer`s requirements.

1.1

Dismantle the existing Porcelain floor tiles where specified on drawings A12, A13. The job includes the removal of fill below the tiles. All the debris must be thrown away in a legal manner according to engineer's instructions. m2 210

1.2

Dismantle the existing kitchen wall tiles where specified on drawing A12. The job includes the removal of mortar behind the tiles. All the debris must be thrown away in a legal manner according to engineer's instructions. m2 75

1.3

Ditto, but removing the existing wall tiles in the showers where specified on drawings A13, A14, A15. The tiles must be dismantled gently up to the nearest grout outward the proposed shower glass position. All according to instructions given by the engineer. m2 75

1.4

Dismantle the existing brick tiles outside the building where specified on drawing A12. The job includes the removal of sand fill below the tiles until reaching the subgrade. All the debris must be thrown away in a legal manner according to engineer's instructions. m2 225

1.5

Demolition of existing block partitions where specified on drawings A12, A13, A15. The job includes removing all debris outside the site in a legal manner according to engineer's instructions. m2 15

1.6

Demolition of existing block partitions to open doors where specified on drawing A14. The job includes cutting through the walls using an electric saw to cut the walls neatly and accurately then demolish the wall. The job also includes removing all the debris outside the site in a legal manner in an approved place. All according to instructions given by the engineer. Job 1

1.7

Demolition of existing Gypsum partitions where specified on drawings A12. The job includes removing all debris outside the site in a legal manner according to engineer's instructions. m2 10

1.8

Demolition of the existing concrete and stone wall in the exterior area where specified on drawing A12. The price includes removing all the plants and filling behind the wall. The price also includes removing and throwing away all the debris outside the site in a legal manner. All according to instructions given by the engineer. Job 1

1 - Demolishing Works

Remodelling of the MSGQ Building

General Services Office-Procurement

Jerusalem

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

1.9

Dismantle and removal of the existing showers and the layer beneath them until reaching the slab where specified on the drawings A13, A14, A15. The job includes dismantling and removing the drain and pipes, shower heads, shower batteries and soap dispensers and dumping them in an approved area outside the site. The price also includes dismantling towel hangers and keeping them in a safe place to reinstall them. The job includes removing all debris outside the site in a legal manner according to engineer's instructions. Unit 18

1.10

Removal of the existing doors where specified on the drawings A12, A13, A14, A15. The job includes removing the door frame. The job also includes dumping all the debris outside the site in a legal manner according to the engineer's instructions. Unit 25

1.11

Dismantle and remove all the kitchen cabinets and shelves with the stone counters and the sink where specified on drawing A12. The price includes the removal of all the pipes, drainage. The price also includes throwing away all the debris outside the site in a legal manner in an approved place. All according to instructions given by the engineer. Job 1

1.12

Dismantle and remove all the solar panels on the roof with the hot tanks that are indicated on the drawing A16. The price shall include dismantling and removing all unneeded items and dumping them in an approved area outside the site in a legal manner. All according to the engineer's instructions Job 1

1.13

Dismantle and remove all the cables and lighting fixtures in the kitchen in the first floor and in the laundry room in the second floor. The price shall include dumping all the debris outside the site in an approved area. All according to the engineer's instructions. Job 1

1.14

Removal of existing door in the drivers room where specified on drawing A12 and keeping it in a safe place to be reinstalled after finishing the works. The door shall be removed with its frame without damaging them. All according to instructions given by the engineer. Job 1

1.15 Ditto, but the door in room 1 Job 1

1.16

Dismantling and removal of the steel cover for the shaft on the roof in a gentle manner where specified on drawing

A16 without damaging the Asbestos pipe. The price includes dumping the debris outside the site in an approved place in a legal manner. All according to instructions given by the engineer. Job 1

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

1.17

Dismantling and removal of old Air conditioning split units. The price includes removing the indoor and outdoor units where specified by the engineer. The job includes removing all the connections, wires, pipes and dumping them outside the site in a legal manner to an approved place. All according to drawings and instructions given by the engineer. Job 1

1.18

Dismantling and removal of lighting fixtures in the bedrooms & bathrooms where specified on drawings and where specified by the engineer. The job includes throwing all the fixtures away outside the site in a legal manner to an approved place. All according to instructions given by the engineer. Job 1

Total of Bill # 1

17% VAT

Total of Bill # 1 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

The contractor, shall when pricing the rates of this bill take into consideration all costs occuring upon him and including and allowing for the cost and expenses of all requirements stipulated in the special specifications, preambles, drawings and general specifications of the contract, and whatever necessary to complete the work according to engineer’s requirements and specifications.

The price includes:

a. Supply and store the sand, cement, aggregates, blocks, formworks, steel and whatever needed for the work in a clean dry place.

b. The pouring and vibration needed for the work

c. The formwork and scaffolding needed

2.1

Supply all the materials needed to cast reinforced concrete

B300 for walls 20 cm thick, steel reinforcement two layers

Ø12/20cm in both directions. The price includes supplying all the material to cast reinforced concrete B300 for the foundation of the wall 50cm x 60cm, with the reinforcement as per the detailed drawing. The price also includes the stone cladding and the stone coping along the wall with a stone similar to the existing stone. Washed gravel 1 1/2" - 2" shall be layed at the wall bottom at the landscape side and a drain pipe shall be installed at every segment to drain the water. The price includes all the neccessary works to finish the job including the excavation, the backfilling, the stone pointing, gravel, refilling the landscape soil, the blinding below the foundation. All work must be done according to detailed drawings and instructions given by the engineer. (see drawing A21) Sq.m 4 400

2- Concrete and block works

Total of Bill # 2

17% VAT

Total of Bill # 2 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

The contractor, shall when pricing the rates of this bill take into consideration all costs occuring upon him and including and allowing for the cost and expenses of all requirements stipulated in the special specifications, preambles, drawings and general specifications of the contract, and whatever necessary to complete the work according to engineer’s requirements and specifications.

The price includes:

a. Supply and store the cement, sand, aggregates, water, lime, steel net, angles and whatever needed in a clean dry place.

b. the sand used must be clean and salt free.

3.1

Supply and install cement plaster to repair the walls where needed after the demolition in the whole building.

This includes the wall edges, the dismantled sockets place.

The price includes all stop beads, angle beads and what is needed all according to instructions given by the engineer. Job 1 1400

3- Plaster works

Total of Bill # 3

17% VAT

Total of Bill # 3(Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

The contractor, shall when pricing the rates of this bill take into consideration all cost occur upon him and allow for the cost and expenses of all requirements stipulated in the special specifications, preambles, drawings and general specifications of the contract, and whatever necessary to accomplish the work according to engineer`s requirement and specifications.

The price includes:

a. Supply and store the tiles, cement, sand, aggregates and whatever needed in a clean dry place.

b. The mortar under the tiles with thickness not less than 5 cm.

c. Supply and install water resistant Mapei grout between the tiles

d. Aluminum angles wherever needed.

e. Samples shall be provided for engineer to choose and approve

4.1

Supply and install Porcelain floor tiles (600x600x80)

(European or American) where specified on drawing A42.

Price includes the sand and mortar below the tiles, price includes the grouting with the required color between the tiles. All works are done according to instructions given by the engineer. m2 135 80

4.2

Supply and install non slip Porcelain floor tiles

(600x600x80) (European or American) for the kitchen and laundry where specified on drawing A42. Price includes the sand and mortar below the tiles, price includes the grouting with the required color between the tiles. All works are done according to instructions given by the engineer. m2 65 80

4.3

Supply and install 0.6 slip resistant porcelain tiles for the bathrooms (300x300x8 mm) where specified on drawing

A42. The price includes the sand and mortar layer under the tiles above the concrete screed. Insulation layer is required, two coats of Sika top seal 107 with its two components liquid and powder or equivalent. The price also includes the grouting between the tiles. The tiling work is done according the drawings and according to the engineer. m2 10 80

4.4

Ditto, but (200mm x 200mm x 80mm) for the shower floor tiles where specified on drawings A42, A43. m2 20 80

4.5

Supply and Install White Granite Porcelain wall tiles

(European or American) in kitchen (100*100*8mm) at height 2000mm where specified on drawing A42. The price includes the mortar behind the tiles and insulation layer and Grouting with the required color is done between the tiles. m2 80 80

4.6

Ditto, but minimum 200mm x 200mm to match the existing tiles for the bathroom wall tiles where specified on drawing A42, A43 m2 110 80

4- Tiling and stone works

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

4.7

Supply and install Yafo Style of Ackerstein interlocking paving stone tiles or equivalent 200mm x100mm x 80mm at the exterior area where specified on the drawing A42.

The job includes repairing the sub-grade and compacting it with vibratory roller after removing the old paving stones with the layer beneath them. After the compaction, the curbstone should be laid and then the required thickness of sand is placed before laying the stones. Plate compactor shall be used to compact the installed interlock paving stones. The job also includes laying fine sand and spreading it evenly on all the area then cleaning it. All according to instructions given by the engineer. m2 225 85

4.8

Supply and install stone tiles after removing the retaining wall and removing the fill. The stone shall be similar to the existing stone. The price includes the sand fill below the tiles, the salb on grade if needed, the pointing works and all necessary works to do teh job. All according to instructions given by the engineer. m2 20 120

4.9

Supply and install kitchen counter top from Caesar 2cm thick and 60cm wide with the color chosen by the engineer. The job includes the openings for the sinks. The price also includes the skirting for it. The price shall include all necessary to fix the top to the counter cabinet.

All according to drawings and instructions given by the engineer. MR 12 350

4.10

Repair the existing stone of the arch at the entrance, eastern window on the first floor, the stone on the roof and old boiler room step. The job includes replacing the stone if needed with a similar stone and filling whereever needed and doing all necessary works. All according to drawings and instructions given by the engineer. Job 1 700

17 % VAT

Total of Bill # 4 (Including VAT)

Total of Bill # 4

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

The contractor shall, when pricing the rates of this bill, take into consideration including and allowing for the costs or expenses of all requirements stipulated in the preambles, drawings and technical specification of the tender.

The price includes:

All the steel, aluminum studs and sections, all the screws, rock wool and all necessary items to complete the job.

All is done according to drawings and details.

5.1

Supply & install 102 mm thick gypsum partition from

Tambour or equivalent consisting of two boards from each side with horizontal studs on floors and ceilings and vertical ones every 400mm ,the gypsum boards are 16mm fire resistant boards (red), the gap between the gypsum boards to be filled with wool rock 50mm thick and

36kg/m3 density. All according to specifications and to engineer's instructions. (Dry wall type 1) m2 25

5.2

Ditto, but one side is 12mm water resistance green gypsum board ( bathroom/kitchen side) and 12mm white gypsum board, and the other side is two16mm fire resistance gypsum board. (Dry wall type 2) m2 20

5.3

Ditto, but both sides are 12mm water resistance green gypsum board and 12mm white gypsum board (Dry wall type 3) m2 15

5.4

Supply and install 200 mm thick red fire resistant gypsum partitions from tambour consisting of two 16mm red fire resistant boards from each sides and an extra red fire resistant board in the middle between the two runners. The gaps between the boards to be filled with wool rock 50 mm thick and 36 kg/m3 density. All according to specifications and instructions by the engineer. (Dry wall type 4) m2 6

5.5

Supply and install 12mm thick white gypsum board to cover the ventilation 6'' pipe where indicated on drawing

M16. the price shall include the steel runners, screws and all necessary items to complete the job all according to instructions by the engineer. mr 3

5- Gypsum works

Total of Bill # 5

17% VAT

Total of Bill # 5 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

All items shall be supplied according to measurments taken in site.

Each item's price shall include the wood painting with the color chosen by the engineer.

6.1

Supply and install wooden doors 45mm thick from plywood 5mm thick and covered with veneer plywood wood to be specified by the engineer, and solid frame from oak wood , and all as per drawing A29, price shall include fixing ironmongery, three stainless steel hinges per leaf of a door, price includes also supply and install locks, handles, cylinders, and louvers and all have to be approved by the engineer, and all according to engineer's instructions. Unit 1

6.2

Ditto, but a wooden door for the handicapped 100x210cm with the necessary accessories such as the push bar. All according to drawings and instructions given by the engineer. Unit 2

6.3

Supply and install wooden sliding door 45mm thick from plywood 5mm thick covered with venner oak wood to be specified by the engineer and a solid frame from oak wood as per attached drawing A30. The price shall include the steel rail, locks, handles, cylinders and louver. The steel rail shall be galvanized and fixed properly to the wall. The job shall also include installing a roller as per drawings.

The job also includes installing the stoppers at both ends of the rail and an anti jump cam. All have to be approved by the engineer and all according to the engineer's instructions. Unit 1

6.4

Reinstall the dismantled door in the drivers room, price to include whatever necessary to accomplish the work. Unit 1

6.5

Supply and install full size bed "Item 1" (140 x 200 cm) as per drawing A52. The bed consists of the main structure of plywood full body wood. The edges of the bed must be of sandwich wood 18mm thick with a plywood veneer from the outside. A wooden dect 10mm thick to be installed on the bed's structure to carry the mattress. The job includes supplying and installing a wooden headboard

900mm high from plywood. The job also includes supplying and installing four drawers in the bed. The drawer is made with MDF with plywood veneer. The price includes all the handles, rails, paint, connections, screws and all nesseccary items. All according to drawings and instructions given by the engineer. Unit 16

6- Wooden works

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

6.6

Supply and install a closet with dimensions "item 22"

(L120xW60xH200 cm) as per drawing A52. The closet is made with sandwich wood 18mm thick with plywood veneer with the color requested by the engineer. The price includes all the hinges, handles, bolts, drawer rails, screws and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 2

6.7

Ditto, but supply and install a closet with dimensions

(L180xW60xH200) "item 31" in drawing A53 Unit 2

6.8

Ditto, but supply and install a closet with dimensions

(L200xW60xH200) "item 44" in drawing A53 Unit 2

6.9

Ditto, but supply and install a closet with dimensions

(L220xW60xH200) "item 2" in drawing A52 Unit 2

6.10

Ditto, but supply and install a closet with dimensions

(L250xW60xH200) "item 38" in drawing A53 Unit 2

6.11

Supply and install a dresser (L110xW60xH80 cm ) "item

3". The dresser is made with sandwich wood 18mm thick with a plywood veneer with the color requested by the engineer. The dresser is all drawers as per drawing A52.

The job includes all the hinges, screws, handles, drawer rails and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 8

6.12

Supply and install desk (L120xW60xH80 cm) "item 6".

The desk is made with sandwich wood 18 mm thick with plywood veneer with the color requested by the engineer as per drawing A52. The price includes supplying a chair for the desk. The price includes all the screws, hinges, handles, rails and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 14

6.13

Ditto, desk with dimensions (L100xW60xH80 cm) "item

29" in drawing A52 Unit 2

6.14

Supply and install shelves "item 7" with dimensions

135x50 cm (7 shelves). The shelves shall be installed between the walls. They are made with sandwich wood

18mm thick with a plywood venner with the color requested by the engineer as per drawing A52. The price includes all the angles, screws and necessary items to complete the job. All according to drawings and instrucitons given by the engineer. Unit 2

6.15

Ditto, but shelves with dimensions 114x50 cm "item 13" in drawing A52 Unit 1

6.16

Ditto, but shelves with dimensions 162x50 cm "item 45" in drawing A53 Unit 1

6.17

Ditto, but with dimensions 115x50cm "item 46". The shelves not to be installed between walls but between two sandwich wood with plywood veneer as per drawings A53. Unit 2

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

6.18

Supply and install shoe box "item 8" 85x30x112 cm with sandwich wood 18mm thick with plywood veneer with the color requested by the engineer as per drawing A52. The job is done according to drawings and instructions given by the engineer. Unit 1

6.19

Ditto but shoe box with dimensions 100x30x112 cm "item

14" in drawing A52 Unit 1

6.20

Ditto but shoe box with dimensions 90x30x112 cm "item

27" in drawing A53 Unit 1

6.21

Supply and install a dresser with shelves "item 28" 104x71 cm as per drawing A52. It is made with sandwich wood

18mm thick with plywood veneer with the color requested by the engineer. The price includes all the screws, drawer rails, handles and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 4

6.22

Supply and install a custom made drawers with shelves

"item 30" above 70x65 cm made with sandwich wood

18mm thick with plywood veneer with the color requested by the engineer as per drawing A52. The job includes all the hinges, rails, screws and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.23 Ditto, but 55x65 cm "item 36" in drawing A53 Unit 3

6.24

Supply and install a hanging closet "item 33" with dimensions 114x60 cm from sandwich wood 18mm thick with plywood veneer with the color requested by the engineer as per drawing A53. The job includes intalling hanging rods, handles for leaves, screws and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 2

6.25

Ditto, but an open closet with dimensions 115x60 cm

"item 35" in drawing A53 Unit 2

6.26

Supply and install open shelves "item 34" with dimensions

33x74 cm as per drawing A53. The shelves are made with sandwich wood 18mm thick with plywood veneer with the color requested by the engineer. The price includes all the angles, screws and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 2

6.27

Supply and install an L-shaped closet "item 37"

185x120xW60xH210 as per drawing A53 from sandwich wood 18mm thick with plywood veneer with the color requested by the engineer. The job includes all the handles, drawer rails, screws and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 4

6.28

Supply and install a coffee table "item 27" 100x40x40cm.

The table shall be made from sandwich wood and a plywood veneer with the color requested by the engineer as per drawing A31 Unit 1

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

6.29

Supply and install L-shaped low shelf for library "item 25" with dimensions 96x104xW30xH90 cm from sandwich wood with plywood veneer with the color requested by the engineer and as per drawing A31. The job includes all angles, screws and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 1

6.30

Ditto, but low shelves with dimension 223x119xW30xH90

"item 36" in drawing A31 Unit 1

6.31

Supply and install L-shaped tall shelf for library "item 26" with dimensions 280x70xW30xH210 cm from sandwich wood with plywood veneer with the color requested by the engineer and as per drawing A31 The job includes all angles, screws and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 1

6.32

Supply and install bench with underneath square shelving for the library "item 28" with dimensions 155x40x40 cm.

The shelf height is 40cm. The wood is sandwich with plywood veneer with the color requested by the engineer and as per drawing A31 The job includes all angles, screws and all necessary items required to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.33

Supply and install built in shelves for the library "item 29"

115x60cm with 30cm between each shelf. The shelves are made from sandwich wood with plywood veneer with the color requested by the engineer and as per drawing A31

The job includes all angles, screws and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.34

Supply and install built in cabinet for the library with sliding doors "item 31" Dimensions of the library

129x60x267 cm. The cabinet is made from sandwich wood with plywood veneer with the color requested by the engineer and as per drawing A31. The job includes all screws, handles, hinges, rails, angles and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.35

Supply and install shelves with dimensions 85x60x90 for the laundry "item 2" from sandwich wood with plywood veneer with the color requested from the engineer and as per drawing A30. The price inlcudes all the angles, screws connections and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 1

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

6.36

Supply and install a shelf for the laundry bathroom "item

6" with dimensions 63x40x210 from sandwich wood with plywood veneer with the color requested from the engineer and as per drawing A30. The job includes all the angles, screws and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.37

Supply and install wall mounted shelves for the laundry

"item 4" with dimensions 115x50 cm from sandwich wood with plywood veneer with the color requested from the engineer and as per drawing A30. The job includes all the angles, screws and all necessary items to complete the job.

All according to drawings and instructions given by the engineer. Unit 2

6.38

Supply and install booth seating for the dining area from sandwich wood covered with plywood veneer as per drawing A17. The job includes spring with foamtop and the seating cushion with Scotchman fabric with density

9kg/m2. The job also includes all the screws, painting, and all necessary works to have the seats ready fr use. All according to drawings and instructions given by the engineer. MR 5

6.39

Supply and install a dining table (170 x 70 x 76 cm) from sandwich wood covered with plywood veneer as per drawing A17. The job includes all the screws, paint and all necessary works to complete the job. All according to instructions given by the engineer. Unit 4

6.40 Supply and install a dining chair. Unit 20

6.41

Supply and install pantry cabinet for the kitchen "item 8"

Dimensions 150x82x180 cm. The cabinet is made from sandwich wood with plywood veneer with the color requested by the engineer and as per drawing A27. The job includes all screws, handles, hinges, rails, angles and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.42

Supply and install pantry shelves for kitchen with dimensions 185x40 cm "item 9" from sandwich wood with plywood veneer with the color requested from the engineer and as per drawing A27. The price inlcudes all the angles, screws connections and all necessary items to complete the job. All according to drawings and instructions given by the engineer. Unit 1

6.43 Ditto, but shelves Item 15 with dimensions L95 x D60 cm. Unit 1

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

6.44

Supply and install a wooden counter for the kitchen in drawing A27 from sandwich wood covered with plywood veneer. The dimension is H90 cm x W60 cm. The job includes all the screws, paint, angles, leaves, hinges and all necessary items to complete the job. All acoording to drawings and instructions given by the engineer.

MR 15

6.45

Supply and install a wooden cabinet for the kitchen in drawing A27 from sandwich wood covered with plywood veneer. The dimension is H63 cm x W40 cm. The job includes all the screws, paint, angles, leaves, hinges and all necessary items to complete the job. All according to drawings and instructions given by the engineer. MR 8

Total of Bill # 6

17% VAT

Total of Bill # 6 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

The contractor, shall when pricing the rates of this bill take into consideration all costs occuring upon him and including and allowing for the cost and expenses of all requirements stipulated in the special specifications, preambles, drawings and general specifications of the contract, and whatever necessary to complete the work according to engineer’s requirements and specifications.

The price includes:

a. Steel in all its shapes, types and sections.

b. Hinges, locks, handles and all accessories for the doors.

c. All the screws and joints and welding works.

7.1

Supply and install a single leaf 30 min Fire resistant door from Rav Briach where indicated on drawings A44, A45 with two 0.8mm thick galvanized steel casings and interior reinforcement, intumescing gasket between door and frame. The price shall include and Anti-panic lock, fixed handle, hinges, locks and cylinders. The price also includes fixing the frame to the walls and casting concrete between the frame and the wall or by installing steel section in the gypsum walls as per drawings.. The contractor shall provide the catalogues and the certificates from the company. All according to instructions given by the engineer. Unit 16

7.2

Supply and install a 50mm thick single leaf 90 min Fire resistant door from Rav Briach where indicated on drawings A44, A45 with two 0.8 mm galvanized steel sheets, reinforced by an internal profile structure. The price shall include a double layered door leafing filling consisting of high density rock wool and fire resistant gypsum. The price shall also include a peripheral fire and smoke resistant gasket with intumescing core attached to the door leaf edge. The price shall include and Anti-panic lock, fixed handle, panic push bar handle, hinges, locks and cylinders. The price also includes fixing the frame to the walls and casting concrete between the frame and the wall or by installing steel section in the gypsum walls as per drawings. The contractor shall provide the catalogues and the certificates from the company. All according to instructions given by the engineer.

Unit 8

7- Steel works

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

7.3

Supply and install a galvanized caged ladder on the roof as per drawing A49. The ladder consists of two 64 mm galvanized steel channel siderails (6005-T5) at a height of

4620mm with a 57 mm serrated galvanized steel tread every 305mm. The job includes fixing a cage around the ladder at height 2285mm up to the top of the ladder as per drawings. The ladder is fixed to the wall with galvanized steel brackets. The job includes all the welding, bolts, connections and the paint. A shopdrawing shall be provided for approval. All according to the drawings and instructions given by the engineer.

Job 1

7.4

Supply and install a galvanized steel cover for the shaft on the roof as per drawing A49. The job includes the steel frame around the shaft and the grills on the sides with the top surface to be a galvanized 2mm steel sheet installed with an angle of 13 degrees. The steel sheet shall be installed in the wall behind the stones as per the detailed drawings. Also the steel sheet shall have an opening for the Asbestos pipe. A steel cone shall be installed around the Asbestos pipe and the space shall be closed with a sealing material. The grill includes the blades, insect screen, galvanized steel head and sill. The job also includes all the welding and bolts, dismantling and reinstalling the stones, and the painting works. A shopdrawing shall be provided for approval. All according to the drawings and instructions given by the engineer. Job 1

17% VAT

Total of Bill # 7 (Including VAT)

Total of Bill # 7

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

8.1

Supply and install tempered glass shower doors 8mm thick as per drawings A41. The job includes all the accessories such as stainless steel handles, hinges, rails, rubbers (side, bottom and in between) and magnet sealers. The job also includes all the bolting and to fix the hinges to the walls.

A shopdrawing shall be provided for each shower for approval. All according to drawings and instructions given by the engineer.

8.1.1 Shower 90x100cm, Height= 200cm No. 2

8.1.2 Shower 80x100cm, Height= 200cm No. 5

8.1.3 Shower 80x120cm, Height= 200cm No. 5

8.1.4 Shower 80x126cm, Height= 200cm No. 5

8.2

Supply and install 3mm glass protection film made of polyster on the inside of the marked windows in sheet

A21. On top of that, apply a frosted glass sticker to cover the glazing. The price also includes the appropriate cleaning cleaning of the glass before application and adhesive used. All according to instructions given by the engineer. m2 20

8- Glass works

Total of Bill # 8

17% VAT

Total of Bill # 8 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

9.1

Prepare surface, clean and apply two coats of putty followed by three coats of Tambour Supercryl 2000 on gypsum board walls. The price shall include all materials such as the calcimo, putty, and joint paper. All according to instructions given by the engineer. (color chosen by engineer) m2 65

9.2

Apply one coat of Supercryl 2000 from Tambour on old walls. The price includes putty reparation if needed. All according to instructions given by the engineer. (color chosen by engineer) m2 1600

9.3

Apply one coat of Polisid paint from Tambour on the ceilings. The price includes putty reparation if needed. All according to instructions given by the engineer. (color chosen by engineer) m2 970

9.4

Apply two coats of Supercryl M.D from Tambour on the balconies edges and slab. The price includes removing any old, loose and peeling paint andemove dust and use exterior Acrylic Putty to fill holes and smooth the surface, And smoothing the surface with sandpaper before applying the supercryl M.D.

All in accordance with instructions given by the engineer.

(color chosen by engineer) m2 60

9.5

Spray two coats of plastic paint on the asbestos pipe on the roof before the works and after finishing the works that has to do with it with the color chosen by the engineer.

The spray shall not be of high pressure to prevent abrasion. All in accordance to instructions given by the engineer. Job 1

9- Painting works

Total of Bill # 9

17% VAT

Total of Bill # 9 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

10.1

Supply and install stainless steel (grade 316 UNS NO.

S31600) counter with sink leftbowl and built in trash can.

The price includes the sink battery and includes all the piping works and second fix works. Dimensions: 125cm x

60cm Unit 1

10.2

Supply and install stainless steel (grade 316 UNS NO.

S31600) shelves for dishes with angled drying racks on each layer. L250 x W40 x H180 cm. The shelves consist of 4 layers with 40 cm between each shelf. Unit 1

10.3

Supply and install stainless steel (grade 316 UNS NO.

S31600) shelves. L220 x W40 x H180 cm. The shelves consist of 4 layers with 40 cm between each shelf. Unit 1

10.4

Supply and install stainless steel (grade 316 UNS NO.

S31600) Table. L115 x W70 x H90 cm. The table consists of the top surface, 4 rectangular legs, and a bottom surface connected/welded at height 20cm. Unit 1

10.5

Supply and install signages as per the drawings A50-A51 for the rooms. The signages shall be made from PVC and the letter are printed on it. All according to drawings and instructions given by the engineer. Unit 41

10.6

Ditto but for evacuation signage plans to be installed on the doors from the inside at height 150 cm. See drawing

M10, M11, M12, M13. Unit 16

10.7

Final cleaning after construction is completed and before

US Government delivers and installs GFCI furnishings.

Job. 1

10- Additional works

Total of Bill # 10

17% VAT

Total of Bill # 10 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

General Provisions of Electrical Works

Preambles

Rates of electrical installations shall includes for:-

Demolition of all existing electrical systems (Lighting, power, cables, outlets, trays, switches, electrical panel, fire alarm, general alarm & all related cabling trunking & conduits) , keeping in good condition delivery to owner with full in coordination with the engineer.

Electrical works including all required materials, accessories, labor, all as required according to drawings, specifications and bill of quantities.

Cutting, and pining including all making good

Forming, or cutting hales, chases, channels etc.in reinforced concrete structure, block works or existing walls, and replastering and repairing the walls where needed after channel opening for conduits

Plugging and screwing

Preparation of all required workshop drawings and as built drawings.

Testing electrical installations including providing written reports & certificates by authorized inspector /engineer approved by consultant . The report should indicate detailed measurements for electrical installations, electrical panels, cables, outlets, isolators, lighting,... etc., and if it is matching the Israeli electrical code, fire code

& ministry of health requirements

Preparing working drawings by authorized Fire Alarm

Engineer, testing the works during & after completion including providing and personal necessary for testing, providing written reports & certificates by authorized fire alarm & "Taken" inspector approved by consultant .

Protection of all electrical works

All outlets, switches, cables, wires should be labelled ( numbers & tags) providing Operating and Maintenance Manual

Mechanical and Electrical Services including as made drawings hard & electronic copy

11.1 Raceways, Cable Trays, and Ladders

Supply, install, test and commission cable trays, cable ladders, cable truncking and sleeves as per drawings and specifications complete with supports, fixing devices, separators, clamps, end caps, draw wires, elbows, joints, branches, reducers, offsets,...etc. with all accessories needed to complete the work as shown on drawing, as per the preamble, the specifications and supervision engineer's requirements.

11.1.1

Galvanized 2 mm thick, (30x10cm) with cover , rate includes mounting accessories See(E34). MR 13

11- Electrical works

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works11.2 Cables and Wires

600 Volt Cables

Supply, install, test and commission 600/1000 volts N2XY copper cables with all required accessories for proper installation and operation conduits, cable lugs, ties... etc.

as shown on drawing, as per the preamble, the specifications and supervision engineer's requirements.

11.2.1

N2XY ( 3x70+35)+35 mm2 includes green conduit 3" up to roof mechanical panel using electrical shaft MR 25

11.2.2

N2XY ( 3x50+25)+25 mm2 includes green conduit 2" up to Kitchen panel MR 10

11.2.3 5x10 mm2, N2XY for DB-1 supplied from floor DB's MR 50

11.3 Electrical Distribution Panels

Supply, install, connect, test and commission complete teken approved factory made type test (IEC 61439) distribution boards including digital instruments, signal lamps, (MCCB) circuit breakers bus bars, space for cables, cable clamps/terminals, cable shoes, current transformers, protection equipment, as per drawings, specifications and local electric authority requirements.

11.3.1 MDB NO 1

11.3.2 DB-Kitchen NO 1

11.3.3 DB-Services NO 1

11.3.4 DB-1 (ADD) 36 CB Capacity PVC Elec. Panel Exposed

NO 1

11.3.5 DB-Mechanical "DB-MECH." NO 1

11.3.6 Power Factor Correction Panel ( PFC ) 70 kVAR NO 1

11.4 Supporting Devices

Power sockets

Supply, install, test and commission the following power sockets/points as shown on drawing, as per the preamble, rate includes conduits, N2XY cables (individual wires not allowed)up to related panels,... the specifications and supervision engineer's requirements.

Nisko or Unica/Schneider

11.4.1 16A power socket outlet N2XY 3x2.5 mm2 NO 26

11.4.2 16A power socket outlet water proof N2XY 3x2.5 mm2 NO 6

11.4.3 16A double power socket outlet N2XY 3x2.5 mm2) NO 3

11.4.4

Surface mount, 16 A 4 socket outlet with isolator includes

N2XY 3x2.5 mm2 to DB-Roof NO 2

11.4.5

Nisko 16A 3P+N+E Interlocked Socket with back box

IP44 Red 3 Phase + 1 phase socket covered ( N2XY

5x2.5 mm2) including water proof isolator wall mount for dishwasher NO 1

11.4.6

4x20A water proof isolator including cables from electrical panel & cable connected to atmor in 2nd floor NO 1

11.4.7

16A power CEE socket outlet water proof including

N2XY 3x2.5 mm2 to (DB-1 Add) & trunks , for washing machines & dryers floor 2 NO 8

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

11.4.8

16A power socket outlet water proof N2XY 3x2.5 mm2 including Double pole switch with indication lamp in same box - kitchen NO 20

11.4.9

4x40A water proof isolator including cables (N2XY 5x10 mm2 ) to electrical panel & oven in kitchen according to drawings E16 NO 1

11.4.10

Combined water proof outlet box including one 3 phase , one single phase& one CEE socket rate also includes isolators inside box & cables 5x2.5 mm2 ( see E16)

NO 4

11.4.11

Nisko Office set including 4 sockets 16 A grounded sockets, 1 data RJ45 cat 6outlet, 1 telephone outlet socket including all related cables . LV cables to be terminated inside data cabinet & telephone box. NO 3

11.4.12

Emerrgency stop buttons one for shutting off main kitchen switch and the other for shutting off mains IEC rate includes cabling flexible cable 2x1.5 mm2 to related panel NO 2

11.4.13

4x16A water proof isolator including cables (N2XY 5x2.5 mm2) to electrical panel in kitchen according to drawings

E04 NO 3

11.5

Feeders & Isolating switches for mechanical equipment's

Supply, install, connect, test and commission complete with all cables, conduits, galvanized steel trunking, boxes, isolating switch and all other accessories form the appropriate distribution board or MCC as specified and detailed on drawings for the following:

11.5.1

16A power socket outlet water proof & isolator for new

AC units, connect to existing AC circuits for old units

No 35

11.5.2

Double pole switch with indication lamp & water proof socket for extract fans in floor , rate includes connecting to existing lighting circuit for bathroom. NO 18

11.5.3

2x16 A single phase water proof isolator including cables

3x2.5 mm2 , flexible thermal conduits & integrons (Roof)

/ water heaters NO 7

11.5.4

2x25 A single phase water proof isolator including cables

3x6 mm2 , flexible thermal conduits & integrons (Roof) water heater NO 1

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

11.5.5

4 pole 16 A isolator water proof for roof pumps including

5x2.5 mm2 cables, flexible thermal conduits & integrons

NO 7

11.5.6

4 pole 40 A isolator water proof for roof Heat pump including 5x16 mm2 cables, flexible thermal conduits & integrons NO 1

11.5.7

5 pole 63 A isolator water proof for roof Heat pump including 5x25 mm2 cables, flexible thermal conduits & integrons NO 1

11.6 Lighting

Lighting points

Supply, install, connect, test and commission a complete lighting point including conductors, fire retardant PVC conduits, N2XY cables (individual wires not allowed)

,(3*1.5mm2)/ (5x2.5mm2), switches & push buttons, boxes, ceiling rose, fire retardant silicon flexible connection cables and all other accessories terminated to electrical panel. as per drawings specifications and related standards.

11.6.1 Lighting point ( N2XY 3x2.5 mm2 ) NO 135

11.7 Lighting Fixtures

Supply, install, connect, test and commission complete lighting fixture, including all supports, suspensions, clamps, power supplies, drivers, internal conductors and/or cables, and all other accessories necessary as per drawings, specifications and related standards.

11.7.1

IP 65 (120X30cm) flicker free , surface mount led panel

40 watt 6000K color temp. as Nisko LED Panel or approved equal. No 45

11.7.2

3W LED Non-Maintained Emergency surface mount

Down light in Cool White, LED Down light, min. 3 hours, electrozen , Nisko or approved equal No 17

11.7.3

3W LED Non-Maintained Emergency EXIT with self test function, min. 3 hours, electrozen , Nisko or approved equal No 10

11.7.4

Continuous LED lighting tunnel surface mount

20watt/meter opal cover body aluminium body , cool white 6000K complete with power supply & Led driver. Mr. 26

11.7.5

Surface mount 18 watt 6000K, circular lighting fixture, type Nisko ICE Led or approved equal. No 40

11.7.6

IP 54 wall mount 18 watt LED light 6000K complete with driver type Nisko Aqua LED or approved equal No 29

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

11.7.7

IP 54 wall mount 18 watt LED light 6000K complete with driver type Nisko Rectangular Aqua LED or approved equal / Roof No 10

11.7.8

Over Mirror lighting fixture 20 watt 60cm long as Nisko home LED IP65 or approved equal. No 9

11.7.9

Ceiling mount 48 watt LED 3000K circular as Optima

LED or approved equal. No 30

11.8 Grounding

Supply, install, connect, test and commission a complete earthing system for the project including all conductors, termination to PEC ,19 mm dia steel copper rods, cables, clamps, conduits, hand holes with heavy duty cast iron cover, fixing, etc., as per specification, drawings, local electric authority regulations, engineers approval and related codes.

11.8.1

10 mm2 flex. earthing of all metal parts that includes cable trays, water pipes, cable ladder, ac units, distribution boards bodies JOB 1

11.8.2 10mm2 earthing of false ceiling NO 10

11.8.3

Grounding system complete as per drawings (E35) rate includes welding galvanized strips to slab & beams, PEC's

& related cables JOB 1

11.9

Low Voltage Points, Data Points (Data, Telephone, intercom,)

Existing data cabinets, patch panels for Data system , the contractor shall supply all related conduits, back boxes, covers & he shall also responsible for installation, labelling & termination for all points

11.9.1

Supply Install, connect, test, label and commission complete data point including boxes, cat 6 cables, conduits, covers as drawings, specification and related codes. NO 8

11.10 TV/Sat Outlets

11.10.1

Satellite socket outlet RG6 cable, 3/4"fire retardant conduit terminated to SAT SW at roof NO 5

Total of Bill # 11

17% VAT

Total of Bill # 11 (Including VAT)

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

Drainage System

Supply and install the following HDPE soil, waste and vent pipes laid exposed, in shafts, or under tiles, type

Huliot, Wavin, Geberet, or equivalent, complete with all accessories and fittings, like elbow, tees, expansion joints in addition to hangers and supports including connections with the existing pipes and manholes, wherever shown in

Drawings and to the approval of the Engineer:

Drainage and vent HDPE pipes of the following sizes:

12.1.2 50 mm diameter HDPE waste pipe. mr 60

Supply and install 4” floor trap with connecting box outlets, type Huliot, Wavin, Geberet, or equivalent, including casting into concrete, excavating, bedding, surrounding and connections to drainage pipes, complete as specified and as shown on drawing.

HDPE floor trap stainless steel cover and strainer of the following sizes:

12.2.2

160x160 mm diameter HDPE floor trap with stainless steel AISI 316 cover and strainer. nr 2

HDPE floor clean out with stainless steel cover and strainer of the following sizes:

12.2.3 120x120 mm diameter HDPE FCO. nr 9

12.3

Supply, install and test P.P Roof Drain (RD) with its chrome cover and sheathing layer under neath type

Dallmar or equivalent including casting into concrete, excavating, bedding, surrounding and connections to drainage pipes, complete as specified and as shown on drawing of the following sizes:

12.3.1 200X200 mm diameter P.P RD nr 4

12.4

Supply, install and test mono block polypropylene floor trench with stainless steel cover AISI 316 and strainer with side siphon connection for showers. The price includes supply and install new shower mixer with 4-way diverter, spray head all related accessories in addition to dismantling the existing ones. The price includes connection with existing drainage pipes of the following sizes:

12.4.1 600x100x100 mm. nr 18

12.5

Supply, install and test AISI 316 stainless steel channel grating cover with its trench from the same manufacturer for kitchen in ground floor, and 8"/4" gully trap with strainer complete with steel frame with flat bar anchors & nailing clips. The price includes connection with the existing drainage pipes of the following sizes:

12.5.1 1000 x 200 x 150 mm nr 3

12- Mechanical works

12.2

12.1

$ (w/o

VAT)

Total $ (w/o

VAT)

1 - Demolishing Works

12.6

Supply, install, test and commission Porcelain Wash

Basin of approximate dimensions 45x35cm, type Ideal

Standard, Roca, Villory and Boch or equivalent. The price includes chrome plated copper tubes, Angle valves type

Nil or equivalent, chrome plated mixers from the same manufacturer and 75 mm seal plastic bottle trap plus plastic extension pipe complete with wall flanges including HDPE pipes connections to floor drain, with all accessories needed to complete the work as per specification and direction of the supervisor engineer.

nr 2

12.7

As above, but wash basin for handicapped with all accessories needed like stainless steel bar holding unit nr 1

12.8

Supply, install, test and commission Porcelain wall hung water closet suite, type Ideal Standard, Roca, Villory and

Boch or equivalent with its concealed flushing cistern recessed in wall type Grohi, Geberit or equivalent and heavy duty seat cover, including connection to water pipes and HDPE drainage pipe. The price includes installing of

1/2" flush hose reel with water hand spray and 15*15cm toilet roll holder and all accessories and fittings needed to complete the work as per specification and direction of the supervisor engineer.

nr 1

12.9

As above, but wall hung for handicapped with all accessories needed like stainless steel bar holding unit nr 1

12.10

Supply, install, test and commission white granite wash basin for the kitchen from HAMAT with dimensions

72x53 cm in the kitchen counter. the price includes all the sealants…