government furnished materials.pdf
PDF 145 KB Posted
- Attached to
- FLNI 200729B Federal contract opportunity
- Solicitation number
- 140P2020R0034
About this file
This document provides a list of government furnished materials to be used in the fabrication of wind chimes under solicitation number 140P2020R0034. Key details include a line item table specifying prototype part numbers, descriptions, manufacturers, locations in assembly, quantities needed and furnished by the government. Comments provide considerations for modifications to improve designs. The related opportunity is for completion of wind chime fabrication for the Department of the Interior National Park Service National Office under solicitation FLNI 200729B. Materials furnished by the government may include previously tested chimes and devices.
View the file
Other files for this federal contract opportunity
Show all 31
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Line Item
Number
Prototype
Part
Reference
Number
Description Manufacturer
Reference No.
General Location in
Assembly
Quantity
Needed for
One
Assembly
Government
Furnished
Material
Quantity
Comments
1 98 5/16" hitch pin & hair pin clip McMaster
#92401A643 Anchorage 2 48
2 74, 75 1 1/2" OD thread upper attachment rod, anchorage bar Anchorage 1 24
Hole may need to be added for pin location on tower.
3 74, 75 1 1/2" OD thread lower attachment rod, anchorage bar Anchorage na castle_nut_
1_5‐6 1 1/2" OD castle nut
McMaster
#91853A041 Anchorage 1 41
1‐
5_flat_wash er
1 1/2" OD SS washers McMaster
#90107a123 Anchorage 2 43
6 77 8" OD, 1/2" SS plate, no studs Anchorage na
7 78 anchorage pad 8" OD, 1/4" McMaster
#8568k385 Anchorage 1 32
7‐16‐
14_2_75 7/16"‐14 x 2 7/8" SS HHCS 316 593g Anchorage 4 280
Verify/update length to reflect proper shear plane.
9 1" ID black rubber washer McMaster
#90130a140 Anchorage/Node 2 128
10 chime tube n/a Chime 1 43
Potential spare material may be included.
23 99001 3" OD node puck, top 1" OD, bottom
5/8" OD, 1" OD suspension bar Node 1 36
Consider fabricating new spud with modifications for improved sustain and/or rigid connector.
24 99002, 23 node bar 3/4" OD x 8" rod Node 1 29
Fabricator to consider possible modification for improved sustain.
25 99002 node bar 3/4" OD x 3 1/2" rod Node 1 na
26 8C012 3/4" ID split clamp McMaster #9633T15 Node 4 134
27 3/4" ID red rubber washer McMaster
#99604A129 Node 4 128
28 19 3/4" ID, 7/8" OD black Igus bushing PFI‐1214‐08 Node 4 49
30 14 5/16"‐18 x 5 1/2" stud Rotator 6 188
Consider use of
SHCS 5/16‐18x4
McMaster
#92185A605 in lieu of.
31 13 5/16"‐18 x 4 3/4" stud Rotator 4 115
Consider use of
SHCS 5/16‐18x4
McMaster
#92185A605 in lieu of.
32 8 1/2" OD, 11/32" ID x 1/2" spacer Rotator 6 210
33 99115, 6 rotator housing body Rotator 1 30
Consider adding holes to lock races.
Consider using
EDM on races.
Line Item
Number
Prototype
Part
Reference
Number
Description Manufacturer
Reference No.
General Location in
Assembly
Quantity
Needed for
One
Assembly
Government
Furnished
Material
Quantity
Comments
35 99116, 10 25mm ID, 23005 x QVU1705 Cup Rotator 2 18 Consider EDM cut on race.
36 25mm ID, 23005 x QVU1705 Cone Rotator 2 24
37 99051, 7 spindle (mod. 5/8" OD) Rotator 1 30
Consider plug weld and turn down to accommodate 5/8 bore on UJ or make new spindles, add undercut on shoulder.
38 9 shaft seal (no spring) SKF = 25x40x5 HVS5V Rotator 1 30 Remove spring.
39 99114, 5 rotator housing head Rotator 1 30
40 12 5/16"‐18 x 1 1/2" HHCS McMaster
#93190A587 Rotator 2 54
Consider use of
SHCS in lieu of.
43 sail mount top Sail 1 1
Used in final prototype demonstration.
44 99105 sail c assembly Sail 1 1
Used in final prototype demonstration.
45 Sail C Airdam Top Sail 1 1
Used in final prototype demonstration.
46 Sail C Airdam Bottom Sail 1 1
Used in final prototype demonstration.
47 Sail C Luff Spar Sail 1 1
Used in final prototype demonstration.
48 Sail C Airfoil Sail 1 1
Used in final prototype demonstration.
49 sail mount bottom Sail 1 1
Used in final prototype demonstration.
50 99012, 3 small striker Striker 1 27
27 strikers in stock, 2 = large, 14 medium, 11 small.
51 99126 3.125" OD x 1/4" ring (dampener stop top) Striker 1 na
53 63 striker plate Striker 1 34
58 99040 tether r angle Tether 2 na
59 77 8" OD x 1/2" SS plates, 3/4"‐16 studs ‐
Tether 2 na
60 66 3/4"‐16 nylon nuts Tether 4 226
61 7‐16‐14 7/16"‐14 SS nylon nuts UJ 4 450
62 21 7/16" SS Norlock lock washer
Three of these are used on every 7/16 bolt McMaster
#91812A232
UJ 6 698
Fabricator to determine if the
Nordlocks are effective on a radius and if it is acceptable to stack them.
99031, 99032 2" OD 1" ID Belden SS UJ UJ 1 na
66 99032 1.25" OD 0.625" ID Belden UJ UJ 2 na
68 1" Upper Suspension Rod USB 1 35
*Materials may include any government procurred chimes and devices used in testing.
File details come from the government source that posted it. Updated .