SOW_11703PR240000045.pdf
PDF 206 KB Posted
- Attached to
- Shell Rotella T3 15W40 Lubricating Oil
- Solicitation number
- 11703PR24Q0000045
About this file
This statement of work outlines the requirements for a federal contract to deliver lubricating oil to a Coast Guard cutter. The contractor must provide 1,800 gallons of Shell Rotella T3 15W40 lubricating oil by truck with pumping capabilities to the USCGC STRATTON at its berth in Alameda, CA on or around December 5, 2023 at 8:00 AM PST. The contractor is responsible for providing hoses compatible with 2-inch Camlock fittings, an on-site spill kit, and over-water transfer certifications for the Alameda area. Upon delivery, the contractor must provide a receipt or manifest to the listed point of contact. The related federal contract opportunity is a solicitation from the Department of Homeland Security's Coast Guard for the delivery of Shell Rotella T3 15W40 lubricating oil.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QandA_11703PR23Q0000045_24NOV23.pdf | ||
| SOW_11703PR240000045.pdf | ||
| Clauses and provisions.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
USCGC STRATTON
DELIVERY OF LUBE OIL
Work Statement
The contractor must provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform as defined in this Scope of Work, the contractor must perform to the standards in this contract.
Deliver to:
USCGC STRATTON
Berth 1
Coast Guard Island
Alameda, CA 94501
The point of contact for this contract is:
Shane Barwick, (571) 610-2319, Shane.A.Barwick@uscg.mil
Period of performance: On or around 5 December 2023 at 8:00 AM PST.
Security Requirements
Due to heightened Security at USCG Facilities, all contractor employees performing tasks related to this
SOW, while onboard a Coast Guard facility, shall have proper valid identification. Time spent undergoing entrance to USCG facilities will not be considered a government delay of work or differing site condition.
Scope of service
The contractor shall provide products and services required in adherence to the following details:
(1) Provide 1,800 gallons of Shell Rotella T3 15W40 lubricating oil (NO SUBSTITUTES).
(2) Delivery must be by truck with pumping capability to USCGC STRATTON.
(3) Contractor must provide hose compatible with female and male 2-inch Camlock hose fitting.
(4) Contractor must provide on site spill kit.
(5) Over the water transfer certifications for Alameda, CA area are required to be secured by the contractor.
(6) Contractor to provide receipt/ manifest of delivery.
mailto:Shane.A.Barwick@uscg.mil
File details come from the government source that posted it. Updated .