00010023 Exhibit 2 Standard Drawings~1.pdf
PDF 359 KB Posted
- Attached to
- ESB US101 MP 51. 84 Culvert Replacement Project
- Solicitation number
- S-73000-00010023
- Issued by
- Tillamook County, Oregon
About this file
This document is the Standard Drawing Exhibit 2 for RD300 Pipe Zone and Multiple Trench Backfill, Bedding details from the Oregon Department of Transportation (ODOT). It provides technical specifications and guidelines for the installation of pipes up to 72 inches in diameter, including the required dimensions, materials, and placement of pipe bedding, backfill, and surface restoration.
The related state and local contract opportunity is the ESB US101 MP 51.84 Culvert Replacement Project, which seeks an ESB Certified contractor to remove a failed 12-foot by 58-foot concrete culvert and replace it with a new 18-inch by 58-foot HDPE culvert, in accordance with the specifications and standard drawings. The project is located in Marion County and the City of Salem, Oregon.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 00010023 Preliminary Bid Results.xlsx | XLSX spreadsheet | |
| 00010023 Exhibit 1 Specifications.pdf | ||
| Attachment B - REVISED Bid Pricing Form.xlsx | XLSX spreadsheet | |
| 00010023 RFCQ_Attachments_US101 Culvert.pdf | ||
| 00010023 RFCQ_US101 Culvert.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RD300
INSTALLATIONS
PIPE ZONE AND MULTIPLE
TRENCH BACKFILL, BEDDING,
R D
.d g n
14-JUL-2014N/A
J U
L
C
"A" note 4)
(See general
Tracer wire
MULTIPLE INSTALLATIONS
DIAMETER MIN. SPACE BETWEEN PIPES
(in)
"A"
(in)
"B"
(in)
"C"
(in)
"D"
TABLE A
Finish grade stabilization, as required
Trench foundation see Table A
"C" Pipe bedding, Top of subgrade as directed
Topsoil or existing material
Surfacing-match
Base material m a te r ia l
E x c a v a te d n a ti v e
C la s s A c r u s h e d r o c k
C la s s B o r m a x c le a n s a n d
C la s s C
A s d ir e c te d m a te r ia l m a x
C la s s D p it o r b a r r u n
C L
S M
C la s s E
T re n c h b a c k fi ll a re a P ip e z o n eS e e T a b le
A
D
Nom."B" "B"
Pipe diameter
24" min.
m in
D ia
Up to 48"
48" to 72"
24"
) dia. of pipe2
One half (
4. See Std. Dwg. RD336 for tracer wire details (When required).
3. Pipes over 72" diameter are structures, and are not applicable to this drawing.
diameter.
used and the pipe is ≥ 36" diameter, increase dimension "B" to nominal pipe
2. For pipe installation in embankment areas where the trench method will not be
1. Surfacing of paved areas shall comply with street cut Std. Dwg. RD302.
GENERAL NOTES FOR ALL DETAILS ON THIS SHEET:
see general note 3.
For pipes over 72" diameter, the current Oregon Standard Specifications.
All materials shall be in accordance with
DATE REVISION DESCRIPTION
OREGON STANDARD DRAWINGS
DATE
SDR
BOOK NO.
CALC.
Effective Date: June 1, 2024 - November 30, 2024
Professional Engineer.
first consulting a Registered and should not be used without sole responsibility of the user principles and practices, is the generally accepted engineering designed in accordance with
Standard Drawing, while
The selection and use of this
Exhibit 2
File details come from the government source that posted it. Updated .