USS HOWARD (DDG-83) Dry-docking Availability

Added: Aug 03, 2016 4:39 pm Modified: Sep 09, 2016 6:07 pmTrack Changes

Accomplish the Emergent Docking Availability of the USS HOWARD (DDG-83). This reqirements is being competed using unusual and compelling procedures in accordance with 10.U.S.C. 2304(c)(1) as implemented by FAR 6.302-2 (b) under NAICS 336611. The successful offeror will be required to have a Southwest Regional Maintenance Center approved Quality System (IAW NAVSEA Standard Item 009-04), approved and in place at time of contract award.

The USS HOWARD(DDG-83) will require an estimated 45 days in dry dock. Dry dock must be a Navy certified dry dock. The projected availability dates are 30 September 2016 through 9 December 2016.

Other considerations for this docking:

The USS HOWARD is displacing (weighing) 9,200 long tons. The certified lifting of the dry dock would handle that on a tons per foot basis. The draft of the ship, including the projections of the sonar dome and propellers is at 30.5 ft. The docking will require a 12 foot keel height.

The USS HOWARD is an Arleigh Burke class destroyer. Dimensions are:

Length Overall: 509 feet, 6 inches.

Breadth: 66 feet

Depth: 30.5 feet

Responses to this RFP may be submitted by hard copy of email to joaquin.alvarez@navy.mil not later than 2:00 PM (PST) on 19 September 2016. Alternate point of contact is dawn.redman@navy.mil. Remit any and all responses as a separate document. Any questions regarding this RFP may be directed to the email addresses listed above. Please note that the Government reserves the right to only answer questions on a direct basis with the inquiring source.

MAIL TO:

Southwest Regional Maintenance Center (SWRMC)

ATTN: Code 410B (Joaquin Alvarez)

Bldg 77- Room 108

3755 Brinser Street

San Diego, CA 92136

Added: Aug 03, 2016 4:39 pm

This is a Source Sought Notice - Request for Information (RFI).  This is not a solicitation announcement for proposals and no contract will be awarded from this announcement.  No reimbursement will be made for any cost associated with providing information in response to this announcement or any follow-up information requests.

The Southwest Regional Maintenance Center (SWRMC) San Diego, CA seeks information from west coast sources that can support the USS HOWARD (DDG-83) Dry-docking Availability. 

The controlling work items are:

• 
  
• 1. Provide and manage Schedule and Associated Reports
  
• 2. Inspect and repair Port Propulsion Shafting and Bearings
  
• 3. Repair and test Controllable Pitch Propeller (CPP) Prairie Air Tube and Valve Rod Assembly
  
• 4. Clean and inspect and flush Controllable Pitch Propeller (CPP) Hydraulic System
  
• 5. Replace Controllable Pitch Propeller (CPP) System, Propeller Hub
  
• 6. Inspect and assess Controllable Pitch Propeller (CPP) System, Propeller Blade
  
• 7. Replace Controllable Pitch Propeller (CPP) Oil Distribution Box
  
• 8. Provide Ship's Force Transportation
  
• 9. Provide Ship's Force Parking
  
• 10. Accomplish Temporary Service, Equipment and Systems Test, Inspection and Repair in Contractor Plant, Barge
  
• 11. Accomplish Dry-docking and Undocking
  

The USS HOWARD(DDG-83) will require an estimated 90 days in dry dock.  Dry dock must be a Navy certified dry dock. The projected availability dates are 31 August 2016 through 29 November 2016.

Other considerations for this docking:

The USS HOWARD is displacing (weighing) 9,200 long tons.  The certified lifting of the dry dock would handle that on a tons per foot basis.  The draft of the ship, including the projections of the sonar dome and propellers is at 30.5 ft.  The docking will require a 12 foot keel height.

The USS HOWARD is an Arleigh Burke class destroyer.  Dimensions are:

Length Overall: 509 feet, 6 inches.

Breadth:  66 feet

Depth:  30.5 feet

This RFI is open to all business concerns that are qualified under the North American Industry Class System (NAICS) code 336611 (Shipbuilding and Repairing).  All interested sources are requested to provide answers to the following:

• 
  
• I. General Information
  
• 1. Name and address to include point of contact (phone number and email address).
  
• 2. Business Size- Large or Small
  
• 3. If Small Business, identify status (e.g., woman owned, veteran, HUBZone, or 8(a))
  
• 4. Commercial and Entity Code (CAGE)
  
• 5. Dun and Bradstreet Number (DUNS)
  
• II. Docking Availability Information
  
• 1. What is the size of the dry-dock facility?
  
• 2. Is the dry-dock certified by the Navy?
  

• 
  
• 3. Is your facility available during the above mentioned timeframe? If not, when is it available? Where exactly is the dry-dock located?
  

Responses to this RFI may be submitted by hard copy of email to joaquin.alvarez@navy.mil not later than 10:00 AM (PST) on 09 August 2016.  Alternate point of contact is dawn.redman@navy.mil.  Remit any and all responses as a separate document.  Any questions regarding this RFI may be directed to the email addresses listed above.  Please note that the Government reserves the right to only answer questions on a direct basis with the inquiring source.

MAIL TO:

Southwest Regional Maintenance Center (SWRMC)

ATTN:  Code 410B (Joaquin Alvarez)

Bldg 77- Room 108

3755 Brinser Street

San Diego, CA 92136

THE SUBMISSION OF THIS INFORMATION IS FOR PLANNING PURPOSES ONLY AND IS NOT TO BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO PROCURE ANY ITEMS/SERVICES, OR FOR THE GOVERNMENT TO PAY FOR THE INFORMATION RECEIVED.  In the event the solicitation is developed it will be assigned a formal Request for Proposal (RFP) number and the solicitation will be publicized in the Federal Business Opportunities Web site.