USCGC kingfisher (WPB 87322) drydock repairs

The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for DryDock Repairs to the USCGC KINGFISHER, a 87-Foot Patrol Boat (WPB-87322). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items.



The Request for Quote (RFQ) and will be solicited as a Set-Aside for a Small Business Set Aside on or about 13 May 2010 and will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS webpage for an RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service.



The acquisition is for DRYDOCK repairs to the USCGC KINGFISHER (WPB-87322). There is a Geographic restriction of 576 Nautical Miles one way or 11152 Nautical Miles Round-trip for this dry-dock availability to a facility within the vessel's homepier at: 4200 Ocean Street, Atlantic Beach, FL, details to follow in the solicitation. The performance period will be about FORTY-TWO (42) calendar days with a start date on or about 23 August 2010. The place of performance will be at the contractor's facility.



The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC KINGFISHER (WPB-87322). This work will include, but is not limited to:



1. Perform Ultrasonic Thickness Measurements

2. Perform Ultrasonic Thickness Measurements

3. Perform Hull and Structural Plating Repairs in Various Compartments Eroded Welds (Steel)

4. Clean and Inspect Dirty Oil Tank

5. Clean and Inspect Oily Water Tank

6. Clean and Inspect Fuel Service Tanks

7. Clean and Inspect Grey Water Tank

8. Clean and Inspect Sewage Tank

9. Clean Grey Water Piping System

10. Clean Sewage Piping System

11. Inspect Pilothouse Deck

12. Inspect RHIB Notch Skid Pads

13. Renew RHIB Notch Skid Pad Studs

14. Realign Main Engine/Reduction Gear

15. Remove, Inspect, and Reinstall Propeller Shafts

16. Repair Shaft

17. Straighten Shaft

18. Renew Intermediate Water-Lubricated Shaft Bearing

19. Renew Aft Water-Lubricated Shaft Bearing

20. Renew Intermediate Bearing Carrier

21. Renew Aft Bearing Carrier

22. Remove, Inspect, and Reinstall Propellers

23. Perform Minor Repair and Recondition of Propeller

24. Renew Depth Indicating Transducer

25. Renew Sea Valves and Inspect Associated Piping and Strainers

26. Remove, Inspect, and Reinstall Rudder Assemblies

27. Remove, Inspect and Reinstall Stern Launch Door, and Inspect Door Pivot Pins, Bushings, and Washers

28. Preserve Underwater Body Partial

29. Preserve Underwater Body 100%

30. Preserve Stern Tubes

31. Modify and Renew Cathodic Protection System

32. Renew Transducer Fairing

33. Routine Drydocking

34. Provide Temporary Logistics

35. Renew Hatch Coamings

36. Preserve Bilge Surfaces in the Lazarette

37. Modify and Preserve the Forepeak (EC 087-A-033)

38. Install Dirty Oil Tank Level Indicator (EC 087-B-039)

39. Preserve Main Deck Surfaces

40. Preserve Freeboard 100%

41. Renew HVAC System Sea Water Cooling Pipe Tree



All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Welding Certifications shall be submitted with the Contractors quote for this work.





Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request.

Surface Forces Logistics Center (SLFC) must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above.



Quotes are due on or about 18 June 2010 at 4:30 p.m. Eastern Standard Time to:



Surface Forces Logistics Center

Attn: Susan Kreider (CPD/CP1/PBPL)

300 East Main Street, Suite 600

Norfolk, VA 23510-9102.



Requests for Quotations and additional information may be submitted to Susan Kreider via fax (757) 628-4644 or emailed to Susan.A.Kreider